The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
The roles of titanium surface micro/nanotopography and wettability on the differential response of human osteoblast lineage cells
Open accessAbstract
Surface micro and nanostructural modifications of dental and orthopaedic implants have shown promising in vitro, in vivo, and clinical results. Surface wettability has also been suggested to play an important role in osteoblast differentiation and osseointegration. However, the available techniques to measure surface wettability are not reliable on clinically-relevant, rough surfaces. Furthermore, how the differentiation state of osteoblast lineage cells impacts their response to micro/nanostructured surfaces, and the role of wettability on this response, remains unclear. In the current study, surface wettability analyses (optical sessile drop analysis, ESEM analysis, and the Wilhelmy technique) indicated hydrophobic static responses for deposited water droplets on microrough and micro/nanostructured specimens, while hydrophilic responses were observed with dynamic analyses of micro/nanostructured specimens. The maturation and local factor production of human immature osteoblast-like MG63 cells was synergistically influenced by nanostructures superimposed onto microrough titanium (Ti) surfaces. In contrast, human mesenchymal stem cells (MSCs) cultured on micro/nanostructured surfaces in the absence of exogenous soluble factors, exhibited less robust osteoblastic differentiation and local factor production compared to cultures on unmodified microroughened Ti. Our results support previous observations using Ti6Al4V surfaces showing that recognition of surface nanostructures and subsequent cell response is dependent on the differentiation state of osteoblast lineage cells. The results also indicate that this effect may be partly modulated by surface wettability. These findings support the conclusion that the successful osseointegration of an implant depends on contributions from osteoblast lineage cells at different stages of osteoblast commitment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Buser, D., Schenk, R. K., Steinemann, S., Fiorellini, J. P., Fox, C. H., & Stich, H. (1991) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820250708 · Cited by 1,719
Contact angle, wetting, and adhesion: a critical review
Good, R. J. (1992) · Journal of Adhesion Science and Technology · doi:10.1163/156856192x00629 · Cited by 1,230
High surface energy enhances cell response to titanium substrate microstructure
Zhao, G., Schwartz, Z., Wieland, M., Rupp, F., Geis‐Gerstorfer, J., Cochran, D. L., & Boyan, B. D. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30320 · Cited by 922
Self-citationGittens, R. A., McLachlan, T., Olivares-Navarrete, R., Cai, Y., Berner, S., Tannenbaum, R., Schwartz, Z., Sandhage, K. H., & Boyan, B. D. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.029 · Cited by 827
Self-citationNanoscale surfaces for the long-term maintenance of mesenchymal stem cell phenotype and multipotency
McMurray, R. J., Gadegaard, N., Tsimbouri, P. M., Burgess, K. V., McNamara, L. E., Tare, R., Murawski, K., Kingham, E., Oreffo, R. O. C., & Dalby, M. J. (2011) · Nature Materials · doi:10.1038/nmat3058 · Cited by 779
Lincks, J. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00144-6 · Cited by 704
Rupp, F., Scheideler, L., Olshanska, N., de Wild, M., Wieland, M., & Geis‐Gerstorfer, J. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30518 · Cited by 651
Self-citationCochran, D. L., Buser, D., Ten Bruggenkate, C. M., Weingart, D., Taylor, T. M., Bernard, J., Peters, F., & Simpson, J. P. (2002) · Clinical Oral Implants Research · doi:10.1034/j.1600-0501.2002.130204.x · Cited by 568
Zhao, G., Raines, A. L., Wieland, M., Schwartz, Z., & Boyan, B. D. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.02.024 · Cited by 473
Self-citationTranscriptional control of osteoblast growth and differentiation
Stein, G. S., Lian, J. B., Stein, J. L., Van Wijnen, A. J., & Montecino, M. (1996) · Physiological Reviews · doi:10.1152/physrev.1996.76.2.593 · Cited by 439
Drelich, J. W., Miller, J. D., & Good, R. J. (1996) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1996.0186 · Cited by 372
Titanium surface roughness alters responsiveness of MG63 osteoblast-like cells to 1?,25-(OH)2D3
Boyan, B. D., Batzer, R., Kieswetter, K., Liu, Y., Cochran, D. L., Szmuckler-Moncler, S., Dean, D. D., & Schwartz, Z. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199801)39:1<77::aid-jbm10>3.0.co;2-l · Cited by 370
Self-citationDifferential regulation of osteoblasts by substrate microstructural features
Zinger, O., Zhao, G., Schwartz, Z., Simpson, J., Wieland, M., Landolt, D., & Boyan, B. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.035 · Cited by 356
Self-citationOlivares-Navarrete, R., Hyzy, S. L., Hutton, D. L., Erdman, C. P., Wieland, M., Boyan, B. D., & Schwartz, Z. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.12.029 · Cited by 305
Self-citationWall, I., Donos, N., Carlqvist, K., Jones, F., & Brett, P. (2009) · Bone · doi:10.1016/j.bone.2009.03.662 · Cited by 287
Bornstein, M. M., Schmid, B., Belser, U. C., Lussi, A., & Buser, D. (2005) · Clinical Oral Implants Research · doi:10.1111/j.1600-0501.2005.01209.x · Cited by 257
Clinical characteristics at implants with a history of progressive bone loss
Fransson, C., Wennström, J., & Berglundh, T. (2008) · Clinical Oral Implants Research · doi:10.1111/j.1600-0501.2007.01448.x · Cited by 217
Khang, D., Choi, J., Im, Y.-M., Kim, Y.-J., Jang, J.-H., Kang, S. S., Nam, T.-H., Song, J., & Park, J.-W. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.05.005 · Cited by 208
Effect of cleaning and sterilization on titanium implant surface properties and cellular response
Park, J. H., Olivares-Navarrete, R., Baier, R. E., Meyer, A. E., Tannenbaum, R., Boyan, B. D., & Schwartz, Z. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.11.026 · Cited by 208
Self-citationFerguson, S. J., Broggini, N., Wieland, M., de Wild, M., Rupp, F., Geis‐Gerstorfer, J., Cochran, D. L., & Buser, D. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30678 · Cited by 202
Self-citationOrsini, G., Piattelli, M., Scarano, A., Petrone, G., Kenealy, J. N., Piattelli, A., & Caputi, S. (2007) · Journal of Periodontology · doi:10.1902/jop.2007.060297 · Cited by 146
Batzer, R., Liu, Y., Cochran, D. L., Szmukler-Moncler, S., Dean, D. D., Boyan, B. D., & Schwartz, Z. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19980905)41:3<489::aid-jbm20>3.0.co;2-c · Cited by 137
Self-citationMicrorough titanium surface affects biologic response in MG63 osteoblast‐like cells
Kim, M., Kim, C., Lim, Y., & Heo, S. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31040 · Cited by 130
Skeletal stem cell physiology on functionally distinct titania nanotopographies
McNamara, L. E., Sjöström, T., Burgess, K. E., Kim, J. J., Liu, E., Gordonov, S., Moghe, P. V., Meek, R. M. D., Oreffo, R. O. C., Su, B., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.063 · Cited by 124
Mendonça, G., Mendonça, D. B. S., Aragão, F. J. L., & Cooper, L. F. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32701 · Cited by 104
Cochran, D. L., Jackson, J. M., Bernard, J. P., ten Bruggenkate, C. M., Buser, D., Taylor, T. D., Weingart, D., Schoolfield, J. D., Jones, A. A., & Oates, T. W. (2012) · PubMed · Cited by 81
Bornstein, M. M., Wittneben, J., Brägger, U., & Buser, D. (2010) · Journal of Periodontology · doi:10.1902/jop.2010.090727 · Cited by 74
Bone integration capability of alkali- and heat-treated nanobimorphic Ti–15Mo–5Zr–3Al
Tsukimura, N., Ueno, T., Iwasa, F., Minamikawa, H., Sugita, Y., Ishizaki, K., Ikeda, T., Nakagawa, K., Yamada, M., & Ogawa, T. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.016 · Cited by 65
Rupp, F., Axmann, D., Ziegler, C., & Geis‐Gerstorfer, J. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10198 · Cited by 53
Self-citationCollaert, B., Wijnen, L., & Bruyn, H. D. (2011) · Clinical Oral Implants Research · doi:10.1111/j.1600-0501.2010.02077.x · Cited by 48
Watanabe, T. (2009) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.117.1285 · Cited by 47
Park, J. H., Olivares‐Navarrete, R., Wasilewski, C. E., Boyan, B. D., Tannenbaum, R., & Schwartz, Z. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.03.074 · Cited by 37
Self-citation
Cited by
A review on the wettability of dental implant surfaces II: Biological and clinical aspects
Gittens, R. A., Scheideler, L., Rupp, F., Hyzy, S. L., Geis-Gerstorfer, J., Schwartz, Z., & Boyan, B. D. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.03.032 · Cited by 849
Self-citationSurface characteristics of dental implants: A review
Rupp, F., Liang, L., Geis-Gerstorfer, J., Scheideler, L., & Hüttig, F. (2018) · Dental Materials · doi:10.1016/j.dental.2017.09.007 · Cited by 585
Self-citationBosshardt, D. D., Chappuis, V., & Buser, D. (2017) · Periodontology 2000 · doi:10.1111/prd.12179 · Cited by 574
A review on the wettability of dental implant surfaces I: Theoretical and experimental aspects
Rupp, F., Gittens, R. A., Scheideler, L., Marmur, A., Boyan, B. D., Schwartz, Z., & Geis-Gerstorfer, J. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.02.040 · Cited by 507
Self-citationGittens, R. A., Olivares-Navarrete, R., Schwartz, Z., & Boyan, B. D. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.03.037 · Cited by 447
Self-citation
Metadata
- Authors
- Gittens, R. A., Olivares-Navarrete, R., Cheng, A., Anderson, D. M., McLachlan, T., Stephan, I., Geis-Gerstorfer, J., Sandhage, K. H., Fedorov, A. G., Rupp, F., Boyan, B. D., Tannenbaum, R., & Schwartz, Z.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2013-04
- Volume
- 9
- Issue
- 4
- Pages
- 6268-6277
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2088467308
- Cited by
- 301
- References
- 32
- FWCI
- 8.89
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.