The DOI matches its Crossref record; 73 of the 73 references it cites were found in a registry or an index.
3D printing of electrically conductive hydrogels for tissue engineering and biosensors – A review
Abstract
Electrically conductive biomaterials are gaining increasing interest owing to their potential to be used in smart, biosensoric and functional tissue-engineered scaffolds and implants. In combination with 3D printing technology, this class of materials might be one of the most advanced approaches towards future medical implants regarding potential functionalities and design possibilities. Conductive hydrogels themselves have been researched for potential sensoric and tissue engineering applications for more than a decade, while the 3D printing of such functional materials is still under early exploration. This review aims to provide a short insight into the most recent developments of 3D printable and electrically conductive hydrogels. It also provides a summary of the last few years of research in this field, with key scope on 3D printing for biomedical applications. The final literature search was conducted in May 2019, with the specific keywords '3D', 'printing', 'conductive', 'hydrogel', 'biocompatible' and combinations of the latter, using advanced search in the databases Scopus®, Web of Science® (Web of Knowledge®) and Google Scholar®. A total of 491 results were gained, while 19 recent publications were identified with the above-mentioned criteria and keywords, which are the studies finally discussed in the paper. The key results have been summarised, and the remaining challenges in the field and the scope for future research activities have been discussed. STATEMENT OF SIGNIFICANCE:: Hydrogels are among the most frequently used biomaterials in tissue engineering (TE). A new class of hydrogels, namely, electrically conductive hydrogels (ECHs), has been introduced in recent years. Although ECHs have been comprehensively reviewed in the literature, the combination of ECHs with 3D printing technology has emerged only recently, representing a promising key development toward the fabrication of functional 3D TE constructs. In this review, we compressively cover for the first time the current state of the art in the field of 3D printing of ECHs. Previous advances are presented, reviewing the 3D printing technologies utilised, spatial resolution and electrical conductivity values achieved, in addition to discussing the obtained mechanical properties and emerging applications of these materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Applications of nanoparticles in biology and medicine
Salata, O. (2004) · Journal of Nanobiotechnology · doi:10.1186/1477-3155-2-3 · Cited by 2,327
Conductive polymers: Towards a smart biomaterial for tissue engineering
Balint, R., Cassidy, N. J., & Cartmell, S. H. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.02.015 · Cited by 1,777
Conducting polymers in biomedical engineering
Guimard, N. K., Gomez, N., & Schmidt, C. E. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.012 · Cited by 1,599
Nanoparticles – known and unknown health risks
Hoet, P. H., Brüske-Hohlfeld, I., & Salata, O. V. (2004) · Journal of Nanobiotechnology · doi:10.1186/1477-3155-2-12 · Cited by 1,374
Hierarchical nanostructured conducting polymer hydrogel with high electrochemical activity
Pan, L., Yu, G., Zhai, D., Lee, H. R., Zhao, W., Liu, N., Wang, H., Tee, B. C.-K., Shi, Y., Cui, Y., et al. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1202636109 · Cited by 1,216
Stimulation of neurite outgrowth using an electrically conducting polymer
Schmidt, C. E., Shastri, V. R., Vacanti, J. P., & Langer, R. (1997) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.94.17.8948 · Cited by 1,071
Clinical toxicology of commercial products
(1964) · Public Health · doi:10.1016/s0033-3506(64)80073-1 · Cited by 943
Toxicity and Environmental Risks of Nanomaterials: Challenges and Future Needs
RAY, P. C., YU, H., & FU, P. P. (2009) · Journal of Environmental Science and Health, Part C · doi:10.1080/10590500802708267 · Cited by 936
Conducting polymer artificial muscles
Baughman, R. H. (1996) · Synthetic Metals · doi:10.1016/0379-6779(96)80158-5 · Cited by 870
Conducting‐Polymer Nanotubes for Controlled Drug Release
Abidian, M. R., Kim, D. ‐., & Martin, D. C. (2006) · Advanced Materials · doi:10.1002/adma.200501726 · Cited by 869
Electrospinning polyaniline-contained gelatin nanofibers for tissue engineering applications
Li, M., Guo, Y., Wei, Y., MacDiarmid, A. G., & Lelkes, P. I. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.11.037 · Cited by 856
Accordion-like honeycombs for tissue engineering of cardiac anisotropy
Engelmayr, G. C., Cheng, M., Bettinger, C. J., Borenstein, J. T., Langer, R., & Freed, L. E. (2008) · Nature Materials · doi:10.1038/nmat2316 · Cited by 848
Modern superabsorbent polymer technology
(1998) · Choice Reviews Online · doi:10.5860/choice.35-5664 · Cited by 804
Jakus, A. E., Secor, E. B., Rutz, A. L., Jordan, S. W., Hersam, M. C., & Shah, R. N. (2015) · ACS Nano · doi:10.1021/acsnano.5b01179 · Cited by 710
Darabi, M. A., Khosrozadeh, A., Mbeleck, R., Liu, Y., Chang, Q., Jiang, J., Cai, J., Wang, Q., Luo, G., & Xing, M. (2017) · Advanced Materials · doi:10.1002/adma.201700533 · Cited by 672
Fabrication and biocompatibility of polypyrrole implants suitable for neural prosthetics
George, P. M., Lyckman, A. W., LaVan, D. A., Hegde, A., Leung, Y., Avasare, R., Testa, C., Alexander, P. M., Langer, R., & Sur, M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.037 · Cited by 570
Toxicity of lithium to humans and the environment—A literature review
Aral, H., & Vecchio-Sadus, A. (2008) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2008.02.026 · Cited by 546
Deng, Z., Hu, T., Lei, Q., He, J., Ma, P. X., & Guo, B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b20178 · Cited by 486
Applications of conducting polymers and their issues in biomedical engineering
Ravichandran, R., Sundarrajan, S., Venugopal, J. R., Mukherjee, S., & Ramakrishna, S. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0120.focus · Cited by 429
3D Printing of Transparent and Conductive Heterogeneous Hydrogel–Elastomer Systems
Tian, K., Bae, J., Bakarich, S. E., Yang, C., Gately, R. D., Spinks, G. M., in het Panhuis, M., Suo, Z., & Vlassak, J. J. (2017) · Advanced Materials · doi:10.1002/adma.201604827 · Cited by 419
3D nanostructured conductive polymer hydrogels for high-performance electrochemical devices
Zhao, Y., Liu, B., Pan, L., & Yu, G. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40997j · Cited by 396
Malliaras, G., & Friend, R. (2005) · Physics Today · doi:10.1063/1.1995748 · Cited by 365
Characterizing the elastic properties of tissues
Akhtar, R., Sherratt, M. J., Cruickshank, J. K., & Derby, B. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70059-1 · Cited by 333
A Review of the Toxicology of Acrylamide
Exon, J. H. (2006) · Journal of Toxicology and Environmental Health, Part B · doi:10.1080/10937400600681430 · Cited by 319
Electronic Properties of Graphene Multilayers
Nilsson, J., Neto, A. H. C., Guinea, F., & Peres, N. M. R. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.266801 · Cited by 304
Pernaut, J.-M., & Reynolds, J. R. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp994274o · Cited by 293
A Single Component Conducting Polymer Hydrogel as a Scaffold for Tissue Engineering
Mawad, D., Stewart, E., Officer, D. L., Romeo, T., Wagner, P., Wagner, K., & Wallace, G. G. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102373 · Cited by 285
Polypyrrole-heparin composites as stimulus-responsive substrates for endothelial cell growth
Garner, B., Georgevich, A., Hodgson, A. J., Liu, L., & Wallace, G. G. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199902)44:2<121::aid-jbm1>3.0.co;2-a · Cited by 279
Heo, D. N., Lee, S.-J., Timsina, R., Qiu, X., Castro, N. J., & Zhang, L. G. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.02.008 · Cited by 271
Highly stretchable hydrogels for UV curing based high-resolution multimaterial 3D printing
Zhang, B., Li, S., Hingorani, H., Serjouei, A., Larush, L., Pawar, A. A., Goh, W. H., Sakhaei, A. H., Hashimoto, M., Kowsari, K., et al. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb00673c · Cited by 252
3D printing nano conductive multi-walled carbon nanotube scaffolds for nerve regeneration
Lee, S.-J., Zhu, W., Nowicki, M., Lee, G., Heo, D. N., Kim, J., Zuo, Y. Y., & Zhang, L. G. (2018) · Journal of Neural Engineering · doi:10.1088/1741-2552/aa95a5 · Cited by 237
A Bioactive Carbon Nanotube‐Based Ink for Printing 2D and 3D Flexible Electronics
Shin, S. R., Farzad, R., Tamayol, A., Manoharan, V., Mostafalu, P., Zhang, Y. S., Akbari, M., Jung, S. M., Kim, D., Comotto, M., et al. (2016) · Advanced Materials · doi:10.1002/adma.201506420 · Cited by 236
UV-Assisted 3D Bioprinting of Nanoreinforced Hybrid Cardiac Patch for Myocardial Tissue Engineering
Izadifar, M., Chapman, D., Babyn, P., Chen, X., & Kelly, M. E. (2018) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2017.0346 · Cited by 236
DNA Synthesis in Cartilage Cells Is Stimulated by Oscillating Electric Fields
Rodan, G. A., Bourret, L. A., & Norton, L. A. (1978) · Science · doi:10.1126/science.625660 · Cited by 233
Cha, C., Shin, S. R., Gao, X., Annabi, N., Dokmeci, M. R., Tang, X. (., & Khademhosseini, A. (2014) · Small · doi:10.1002/smll.201302182 · Cited by 229
3D printing of ionic conductors for high-sensitivity wearable sensors
Yin, X.-Y., Zhang, Y., Cai, X., Guo, Q., Yang, J., & Wang, Z. L. (2019) · Materials Horizons · doi:10.1039/c8mh01398e · Cited by 227
Highly Elastic, Transparent, and Conductive 3D‐Printed Ionic Composite Hydrogels
Odent, J., Wallin, T. J., Pan, W., Kruemplestaedter, K., Shepherd, R. F., & Giannelis, E. P. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701807 · Cited by 218
Gomez, N., Lee, J. Y., Nickels, J. D., & Schmidt, C. E. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600669 · Cited by 212
A conducting polymer with enhanced electronic stability applied in cardiac models
Mawad, D., Mansfield, C., Lauto, A., Perbellini, F., Nelson, G. W., Tonkin, J., Bello, S. O., Carrad, D. J., Micolich, A. P., Mahat, M. M., et al. (2016) · Science Advances · doi:10.1126/sciadv.1601007 · Cited by 212
Incorporation of Conductive Materials into Hydrogels for Tissue Engineering Applications
Min, J. H., Patel, M., & Koh, W.-G. (2018) · Polymers · doi:10.3390/polym10101078 · Cited by 202
Rouabhia, M., Park, H., Meng, S., Derbali, H., & Zhang, Z. (2013) · PLoS ONE · doi:10.1371/journal.pone.0071660 · Cited by 201
Bilayer dimensions and movement in artificial muscles
Otero, T. F., & Sansinena, J. M. (1997) · Bioelectrochemistry and Bioenergetics · doi:10.1016/s0302-4598(96)05112-4 · Cited by 190
Rapid 3D Patterning of Poly(acrylic acid) Ionic Hydrogel for Miniature pH Sensors
Yin, M., Yao, M., Gao, S., Zhang, A. P., Tam, H., & Wai, P. A. (2016) · Advanced Materials · doi:10.1002/adma.201504021 · Cited by 190
Effects of electrical stimulation on cell proliferation and apoptosis
Love, M. R., Palee, S., Chattipakorn, S. C., & Chattipakorn, N. (2018) · Journal of Cellular Physiology · doi:10.1002/jcp.25975 · Cited by 180
Yang, S., Jang, L., Kim, S., Yang, J., Yang, K., Cho, S.-W., & Lee, J. Y. (2016) · Macromolecular Bioscience · doi:10.1002/mabi.201600148 · Cited by 173
Solidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures
Håkansson, K. M. O., Henriksson, I. C., de la Peña Vázquez, C., Kuzmenko, V., Markstedt, K., Enoksson, P., & Gatenholm, P. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600096 · Cited by 160
Integrated soft sensors and elastomeric actuators for tactile machines with kinesthetic sense
Robinson, S. S., O’Brien, K. W., Zhao, H., Peele, B. N., Larson, C. M., Murray, B. C. M., Meerbeek, I. M. V., Dunham, S. N., & Shepherd, R. F. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.09.005 · Cited by 158
Optimal electrical stimulation boosts stem cell therapy in nerve regeneration
Du, J., Zhen, G., Chen, H. A., Zhang, S., Qing, L., Yang, X., Lee, G., Mao, H., & Jia, X. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.07.015 · Cited by 149
Hearing by cochlear nucleus stimulation in humans.
Edgerton, B. J., House, W. F., & Hitselberger, W. E. (1982) · PubMed · Cited by 147
Li, Y., Neoh, K. G., & Kang, E. T. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30286 · Cited by 140
Electrochemical modulation of epithelia formation using conducting polymers
Svennersten, K., Bolin, M. H., Jager, E. W. H., Magnus Berggren, A., & Richter‐Dahlfors, A. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.059 · Cited by 137
Fabrication of conductive gelatin methacrylate–polyaniline hydrogels
Wu, Y., Chen, Y. X., Yan, J., Quinn, D., Dong, P. X., Sawyer, S. W., & Soman, P. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.036 · Cited by 136
Otero, T. F., & Cortés, M. T. (2003) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(03)00518-5 · Cited by 134
Kwon, H. J., Lee, G. S., & Chun, H. (2016) · Scientific Reports · doi:10.1038/srep39302 · Cited by 128
Electric Stimulation at 448 kHz Promotes Proliferation of Human Mesenchymal Stem Cells
Hernández‐Bule, M. L., Paı́no, C. L., Trillo, M. Á., & Úbeda, A. (2014) · Cellular Physiology and Biochemistry · doi:10.1159/000366375 · Cited by 122
Runge, M. B., Dadsetan, M., Baltrušaitis, J., Ruesink, T., Lu, L., Windebank, A. J., & Yaszemski, M. J. (2010) · Biomacromolecules · doi:10.1021/bm100526a · Cited by 113
Biofunctionalized carbon nanotubes in neural regeneration: a mini-review
Hwang, J., Shin, U. S., Jang, W., Hyun, J. K., Wall, I. B., & Kim, H. (2012) · Nanoscale · doi:10.1039/c2nr31581e · Cited by 95
Dai, L. (1999) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1081/mc-100101421 · Cited by 90
Scale-dependent mechanical properties of native and decellularized liver tissue
Evans, D. W., Moran, E. C., Baptista, P. M., Söker, S., & Sparks, J. L. (2012) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-012-0426-3 · Cited by 90
Mawad, D., Lauto, A., & Wallace, G. G. (2015) · Springer series on polymer and composite materials · doi:10.1007/978-3-319-25322-0_2 · Cited by 82
Fitzsimmons, R. J., Gordon, S. L., Kronberg, J., Ganey, T. M., & Pilla, A. A. (2008) · Journal of Orthopaedic Research® · doi:10.1002/jor.20590 · Cited by 81
Polypyrrole-incorporated conductive hyaluronic acid hydrogels
Yang, J., Choe, G., Yang, S., Jo, H., & Lee, J. Y. (2016) · Biomaterials Research · doi:10.1186/s40824-016-0078-y · Cited by 79
3D Printing/Interfacial Polymerization Coupling for the Fabrication of Conductive Hydrogel
Fantino, E., Roppolo, I., Zhang, D., Xiao, J., Chiappone, A., Castellino, M., Guo, Q., Pirri, C. F., & Yang, J. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700356 · Cited by 66
Electrical Stimulation Increases Random Migration of Human Dermal Fibroblasts
Snyder, S., DeJulius, C. R., & Willits, R. K. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-017-1849-x · Cited by 62
3D printable conducting hydrogels containing chemically converted graphene
Sayyar, S., Gambhir, S., Chung, J. H.-Y., Officer, D. L., & Wallace, G. G. (2017) · Nanoscale · doi:10.1039/c6nr07516a · Cited by 61
Wu, Y., Chen, Y. X., Yan, J., Yang, S., Dong, P. X., & Soman, P. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00629e · Cited by 60
3D Printing of Flexible Liquid Sensor Based on Swelling Behavior of Hydrogel with Carbon Nanotubes
Li, X., Yang, Y., Xie, B., Chu, M., Sun, H., Hao, S., Chen, Y., & Chen, Y. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800476 · Cited by 60
Hardy, J. G., Cornelison, R. C., Sukhavasi, R. C., Saballos, R. J., Vu, P. P., Kaplan, D. L., & Schmidt, C. E. (2015) · Bioengineering · doi:10.3390/bioengineering2010015 · Cited by 58
Membrane with controllable permeability for drugs
Stassen, I., Sloboda, T., & Hambitzer, G. (1995) · Synthetic Metals · doi:10.1016/0379-6779(94)03241-w · Cited by 30
Saigal, R., Cimetta, E., Tandon, N. M., Zhou, J. A., Langer, R., Young, M. J., Vunjak‐Novakovic, G., & Redenti, S. (2013) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2013.6609828 · Cited by 20
Kunz, F., Rebl, H., Quade, A., Matschegewski, C., Finke, B., & Nebe, J. G. B. (2015) · European Cells and Materials · doi:10.22203/ecm.v029a13 · Cited by 16
Emerging Trends in Biomaterials Research
Gaharwar, A. K., Detamore, M. S., & Khademhosseini, A. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1644-0 · Cited by 11
Cited by
Synthetic hydrogels: Synthesis, novel trends, and applications
Madduma‐Bandarage, U. S. K., & Madihally, S. V. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.50376 · Cited by 517
Natural Biopolymer-Based Biocompatible Conductors for Stretchable Bioelectronics
Wang, C., Yokota, T., & Someya, T. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00897 · Cited by 412
Zhang, K., Feng, Q., Fang, Z., Gu, L., & Bian, L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00071 · Cited by 394
Smart Hydrogels for Advanced Drug Delivery Systems
Bordbar-Khiabani, A., & Gasik, M. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23073665 · Cited by 382
Functional Conductive Hydrogels for Bioelectronics
Fu, F., Wang, J., Zeng, H., & Yu, J. (2020) · ACS Materials Letters · doi:10.1021/acsmaterialslett.0c00309 · Cited by 364
Metadata
- Authors
- Distler, T., & Boccaccini, A. R.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 101
- Pages
- 1-13
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2970434695
- Cited by
- 326
- References
- 73
- FWCI
- 12.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.