The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
Additively manufactured carbon fiber-reinforced composites: State of the art and perspective
Open accessAbstract
While polymer additive manufacturing (AM) has advanced significantly over the past few decades, the limitations in material properties, speed of manufacture, and part size have relegated this technology to the space of rapid prototyping rather than the legitimate manufacture of end-use parts. Carbon fiber offers a low density, a low coefficient of thermal expansion, and high thermal conductivity and is an ideal material for bringing polymer-based AM from the realm of form and fit to that of form, fit, and function. Use of carbon fiber in AM can improve material properties, reduce the time required to manufacture functional parts compared with traditional subtractive technologies, and reduce warping, thereby enabling a larger possible build envelope. Therefore, the addition of carbon fiber to various AM technologies is of increasing interest in academic and industrial communities. This paper examines the work performed in this fast-growing area to date. Specifically, the effects of fiber reinforcement on the structure and mechanical properties of 3D printed parts are investigated within the body of literature. Upper bounds for tensile properties of carbon fiber composites are theoretically evaluated and compared with experimentally measured values. Moreover, current and potential applications of additively manufactured carbon fiber composites in the context of desktop 3D printing and big area AM are discussed. Recent innovations and industry breakthroughs in this field are also examined. This review is intended to organize and synthesize the present body of work surrounding AM of carbon fiber reinforced plastics, identify the most promising technologies, and prescribe viable research and development paths forward to advance AM from the application space of rapid prototyping to that of functional, load-bearing, end-use parts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
Self-citationAdditive manufacturing methods and modelling approaches: a critical review
Bikas, H., Stavropoulos, P., & Chryssolouris, G. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7576-2 · Cited by 1,427
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Yang, C., Wang, Q., & Li, D. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.032 · Cited by 1,162
Fu, S. (1996) · Composites Science and Technology · doi:10.1016/s0266-3538(96)00072-3 · Cited by 847
Dickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.06.004 · Cited by 792
Ferreira, R. T. L., Amatte, I. C., Dutra, T. A., & Bürger, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.05.013 · Cited by 764
Fused filament fabrication of fiber-reinforced polymers: A review
Brenken, B., Barocio, E., Favaloro, A., Kunc, V., & Pipes, R. B. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.01.002 · Cited by 737
Short fiber reinforced composites for fused deposition modeling
Zhong, W., Li, F., Zhang, Z., Song, L., & Li, Z. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01810-4 · Cited by 721
Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
Li, N., Li, Y., & Liu, S. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.07.025 · Cited by 707
Ning, F., Cong, W., Hu, Y., & Wang, H. (2017) · Journal of Composite Materials · doi:10.1177/0021998316646169 · Cited by 632
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
3D Printing multifunctionality: structures with electronics
Espalin, D., Muse, D. W., MacDonald, E., & Wicker, R. B. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5717-7 · Cited by 614
Goh, G. D., Dikshit, V., Nagalingam, A. P., Goh, G. L., Agarwala, S., Sing, S. L., Wei, J., & Yeong, W. Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.021 · Cited by 604
Melenka, G. W., Cheung, B. K. O., Schofield, J. S., Dawson, M. R., & Carey, J. P. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.07.018 · Cited by 597
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steel
Kempen, K., Yasa, E., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.033 · Cited by 566
Rapid energy-efficient manufacturing of polymers and composites via frontal polymerization
Robertson, I. D., Yourdkhani, M., Centellas, P. J., Aw, J. E., Ivanoff, D. G., Goli, E., Lloyd, E. M., Dean, L. M., Sottos, N. R., Geubelle, P. H., et al. (2018) · Nature · doi:10.1038/s41586-018-0054-x · Cited by 527
3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens
Der Klift, F. V., Koga, Y., Todoroki, A., Ueda, M., Hirano, Y., & Matsuzaki, R. (2016) · Open Journal of Composite Materials · doi:10.4236/ojcm.2016.61003 · Cited by 516
The importance of carbon fiber to polymer additive manufacturing
Love, L. J., Kunc, V., Rios, O., Duty, C. E., Elliott, A. M., Post, B. K., Smith, R. J., & Blue, C. A. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.212 · Cited by 493
Nanofiber‐reinforced polymers prepared by fused deposition modeling
Shofner, M. L., Lozano, K., Rodríguez‐Macías, F. J., & Barrera, E. V. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12496 · Cited by 484
Characterization of 3D printed long fibre reinforced composites
Justo, J., Távara, L., García-Guzmán, L., & París, F. (2018) · Composite Structures · doi:10.1016/j.compstruct.2017.11.052 · Cited by 473
Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
Rahim, T. N. A. T., Abdullah, A. M., & Md Akil, H. (2019) · Polymer Reviews · doi:10.1080/15583724.2019.1597883 · Cited by 452
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Wang, Q., Dilmurat, A., Li, D., & Ziegmann, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.139 · Cited by 432
Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential
Goh, G. D., Agarwala, S., Goh, G. L., Dikshit, V., Sing, S. L., & Yeong, W. Y. (2017) · Aerospace Science and Technology · doi:10.1016/j.ast.2016.12.019 · Cited by 413
Structure and mechanical behavior of Big Area Additive Manufacturing (BAAM) materials
Duty, C. E., Kunc, V., Compton, B., Post, B., Erdman, D., Smith, R., Lind, R., Lloyd, P., & Love, L. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2015-0183 · Cited by 375
What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers
Duty, C., Ajinjeru, C., Kishore, V., Compton, B. G., Hmeidat, N. S., Chen, X., Liu, P., Hassen, A. A., Lindahl, J. M., & Kunc, V. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.008 · Cited by 367
An overview of additive manufacturing (3D printing) for microfabrication
Bhushan, B., & Caspers, M. (2017) · Microsystem Technologies · doi:10.1007/s00542-017-3342-8 · Cited by 338
Additive Manufacturing for the Aerospace Industry
(2019) · Elsevier eBooks · doi:10.1016/c2017-0-00712-7 · Cited by 331
Hao, W., Liu, Y., Zhou, H., Chen, H., & Fang, D. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2017.11.004 · Cited by 319
Lewicki, J. P., Rodriguez, J. N., Zhu, C., Worsley, M. A., Wu, A. S., Kanarska, Y., Horn, J. D., Duoss, E. B., Ortega, J. M., Elmer, W., et al. (2017) · Scientific Reports · doi:10.1038/srep43401 · Cited by 318
Liao, G., Li, Z., Cheng, Y., Xu, D., Zhu, D., Jiang, S., Guo, J., Chen, X., Xu, G., & Zhu, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.027 · Cited by 315
Manfredi, D., Calignano, F., Krishnan, M., Canali, R., Ambrosio, E., & Atzeni, E. (2013) · Materials · doi:10.3390/ma6030856 · Cited by 307
Kishore, V., Ajinjeru, C., Nycz, A., Post, B., Lindahl, J., Kunc, V., & Duty, C. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.11.008 · Cited by 292
Yan, C., Hao, L., Xu, L., & Shi, Y. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.08.013 · Cited by 236
Processing of a Polyamide-12/carbon nanofibre composite by laser sintering
Goodridge, R. D., Shofner, M. L., Hague, R. J. M., McClelland, M., Schlea, M. R., Johnson, R. B., & Tuck, C. J. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2010.10.011 · Cited by 234
Manufacturing and 3D printing of continuous carbon fiber prepreg filament
Hu, Q., Duan, Y., Zhang, H., Liu, D., Yan, B., & Peng, F. (2018) · Journal of Materials Science · doi:10.1007/s10853-017-1624-2 · Cited by 212
Liu, S., Li, Y., & Li, N. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.007 · Cited by 207
Thermal analysis of additive manufacturing of large-scale thermoplastic polymer composites
Compton, B. G., Post, B., Duty, C., Love, L. J., & Kunc, V. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.07.006 · Cited by 206
Zhang, W., Cotton, C., Sun, J., Heider, D., Gu, B., Sun, B., & Chou, T.-W. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.11.018 · Cited by 203
Jiang, D., & Smith, D. E. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.006 · Cited by 200
Composite 3D printing for the small size unmanned aerial vehicle structure
Azarov, A. V., Antonov, F. K., Golubev, M. V., Khaziev, A. R., & Ushanov, S. A. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.03.073 · Cited by 182
Shofner, M. L., Rodrı́guez-Macı́as, F. J., Vaidyanathan, R., & Barrera, E. V. (2003) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.07.002 · Cited by 176
UV-Assisted 3D Printing of Glass and Carbon Fiber-Reinforced Dual-Cure Polymer Composites
Invernizzi, M., Natale, G., Levi, M., Turri, S., & Griffini, G. (2016) · Materials · doi:10.3390/ma9070583 · Cited by 174
Dieless Forming of Carbon Fibre Reinforced Plastic Parts Using 3D Printer
Mori, K., Maeno, T., & Nakagawa, Y. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.10.196 · Cited by 155
Additive manufacturing of near-net-shape bonded magnets: Prospects and challenges
Li, L., Post, B., Kunc, V., Elliott, A., & Paranthaman, M. P. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.12.035 · Cited by 155
State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies
Hofstätter, T., Pedersen, D. B., Tosello, G., & Hansen, H. N. (2017) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684417695648 · Cited by 152
3D-printable CFR polymer composites with dual-cure sequential IPNs
Griffini, G., Invernizzi, M., Levi, M., et al. (2016) · Polymer · doi:10.1016/j.polymer.2016.03.048 · Cited by 149
Salmoria, G. V., Paggi, R. A., Lago, A., & Beal, V. E. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2011.04.007 · Cited by 148
Jiang, D., Hoglund, R. M., & Smith, D. E. (2019) · Fibers · doi:10.3390/fib7020014 · Cited by 131
Wu, J., Hui, C., Wu, Q., et al. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.12.037 · Cited by 119
Ming, Y., Duan, Y., Wang, B., Xiao, H. L., & Zhang, X. (2019) · Materials · doi:10.3390/ma12091369 · Cited by 115
Direct-write 3D printing of NdFeB bonded magnets
Compton, B. G., Kemp, J. W., Novikov, T. V., Pack, R. C., Nlebedim, C. I., Duty, C., Rios, O. R., & Paranthaman, M. P. (2016) · Materials and Manufacturing Processes · doi:10.1080/10426914.2016.1221097 · Cited by 114
3D printing of carbon fiber-filled conductive silicon rubber
Huang, P., Xia, Z., & Cui, S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.12.051 · Cited by 110
3D printing of high performance cyanate ester thermoset polymers
Chandrasekaran, S., Duoss, E. B., Worsley, M. A., & Lewicki, J. P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta09466c · Cited by 96
A review on fibre reinforced composite printing via FFF
Ferreira, I., Machado, M., Alves, F., & Marques, A. T. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2019-0004 · Cited by 85
Brooks, H., & Molony, S. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.10.123 · Cited by 80
Ajinjeru, C., Kishore, V., Liu, P., Lindahl, J. M., Hassen, A. A., Kunc, V., Post, B., Love, L. J., & Duty, C. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.03.004 · Cited by 68
Karalekas, D. (2003) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(03)00153-5 · Cited by 59
Fabricating patch antennas within complex dielectric structures through multi-process 3D printing
MacDonald, E. W., Espalin, D., Doyle, D., Muñoz, J., Ambriz, S., Coronel, J. L., Williams, A., & Wicker, R. B. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.05.013 · Cited by 41
Self-citationTHE DURABILITY OF LARGE-SCALE ADDITIVE MANUFACTURING COMPOSITE MOLDS
Post, B., Love, L. J., Duty, C., Vaidya, U. K., Pipes, R. B., & Kunc, V. (2016) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 37
Weihong, Z., Li, F., Zhang, Z., et al. (2001) · Materials and Manufacturing Processes · doi:10.1081/amp-100103694 · Cited by 31
Hofstätter, T., Gutmann, I. W., Koch, T., Pedersen, D. B., Tosello, G., Heinz‐Peer, G., & Hansen, H. N. (2016) · Technical University of Denmark, DTU Orbit (Technical University of Denmark, DTU) · Cited by 26
Contoured 3D Printing of Fiber Reinforced Polymers
Tse, L. Y. L., Kapila, S., & Barton, K. L. (2016) · Cited by 3
Cited by
Polymer composite materials: A comprehensive review
Hsissou, R., Seghiri, R., Benzekri, Z., Hilali, M., Rafik, M., & Elharfi, A. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.113640 · Cited by 1,136
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
A critical review on the fused deposition modeling of thermoplastic polymer composites
Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 704
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
Metadata
- Authors
- van de Werken, N., Tekinalp, H., Khanbolouki, P., Ozcan, S., Williams, A., & Tehrani, M.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 31
- Pages
- 100962
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2990736700
- Cited by
- 566
- References
- 68
- FWCI
- 23.58
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.