The DOI matches its Crossref record; 98 of the 98 references it cites were found in a registry or an index.
Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: A review
Open accessAbstract
Recently, the fabrication methods of orthopedic implants and devices have been greatly developed. Additive manufacturing technology allows the production of complex structures with bio-mimicry features, and has the potential to overcome the limitations of conventional fabrication methods. This review explores open-cellular structural design for porous metal implant applications, in relation to the mechanical properties, biocompatibility, and biodegradability. Several types of additive manufacturing techniques including selective laser sintering, selective laser melting, and electron beam melting, are discussed for different applications. Additive manufacturing through powder bed fusion shows great potential for the fabrication of high-quality porous metal implants. However, the powder bed fusion technique still faces two major challenges: it is high cost and time-consuming. In addition, triply periodic minimal surface (TPMS) structures are also analyzed in this paper, targeting the design of metal implants with an enhanced biomorphic environment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Toxicity, mechanism and health effects of some heavy metals
Jaishankar, M., Tseten, T., Anbalagan, N., Mathew, B. B., & Beeregowda, K. N. (2014) · Interdisciplinary Toxicology · doi:10.2478/intox-2014-0009 · Cited by 6,402
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Biomaterials & scaffolds for tissue engineering
O'Brien, F. J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70058-x · Cited by 3,437
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Zheng, Y. F., Gu, X. N., & Witte, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.01.001 · Cited by 2,436
Chen, Q., & Thouas, G. A. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.10.001 · Cited by 2,398
Recent advances in bone tissue engineering scaffolds
Bose, S., Roy, M., & Bandyopadhyay, A. (2012) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.07.005 · Cited by 2,206
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
The Essential Toxin: Impact of Zinc on Human Health
Plum, L. M., Rink, L., & Haase, H. (2010) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph7041342 · Cited by 1,577 · cited 1×
“However, excessive amounts of these essential minerals are toxic [11].”
BackgroundMohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,481
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
Biomimetic Systems for Hydroxyapatite Mineralization Inspired By Bone and Enamel
Palmer, L. C., Newcomb, C. J., Kaltz, S. R., Spoerke, E. D., & Stupp, S. I. (2008) · Chemical Reviews · doi:10.1021/cr8004422 · Cited by 1,090
Al-Ketan, O., Rowshan, R., & Abu Al-Rub, R. K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.006 · Cited by 941
Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents
Bowen, P. K., Drelich, J., & Goldman, J. (2013) · Advanced Materials · doi:10.1002/adma.201300226 · Cited by 928
Bobbert, F. S. L., Lietaert, K., Eftekhari, A. A., Pouran, B., Ahmadi, S. M., Weinans, H., & Zadpoor, A. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.024 · Cited by 873
Woodard, J. R., Hilldore, A. J., Lan, S. K., Park, C. J., Morgan, A. W., Eurell, J. A. C., Clark, S. G., Wheeler, M. B., Jamison, R. D., & Wagoner Johnson, A. J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.021 · Cited by 829
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
Gokuldoss, P. K., Kolla, S., & Eckert, J. (2017) · Materials · doi:10.3390/ma10060672 · Cited by 804
Biomechanics of Trabecular Bone
Keaveny, T. M., Morgan, E. F., Niebur, G. L., & Yeh, O. C. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.307 · Cited by 801
Additive manufacturing of biomaterials
Bose, S., Ke, D., Sahasrabudhe, H., & Bandyopadhyay, A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.08.003 · Cited by 738
Evaluations of cellular lattice structures manufactured using selective laser melting
Yan, C., Hao, L., Hussein, A., & Raymont, D. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.06.002 · Cited by 730
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Toxicity of Metal Compounds: Knowledge and Myths
Egorova, K. S., & Ananikov, V. P. (2017) · Organometallics · doi:10.1021/acs.organomet.7b00605 · Cited by 703
A new look at biomedical Ti-based shape memory alloys
Biesiekierski, A., Wang, J., Gepreel, M. A.-H., & Wen, C. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.01.018 · Cited by 688
Self-citationProcessing of biocompatible porous Ti and Mg
Wen, C. E., Mabuchi, M., Yamada, Y., Shimojima, K., Chino, Y., & Asahina, T. (2001) · Scripta Materialia · doi:10.1016/s1359-6462(01)01132-0 · Cited by 665
Self-citationMetallic Biomaterials: Current Challenges and Opportunities
Prasad, K., Bazaka, O., Chua, M., Rochford, M., Fedrick, L., Spoor, J., Symes, R., Tieppo, M., Collins, C., Cao, A., et al. (2017) · Materials · doi:10.3390/ma10080884 · Cited by 662
Shipley, H., McDonnell, D., Culleton, M., Coull, R., Lupoi, R., O’Donnell, G. E., & Trimble, D. (2018) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2018.01.003 · Cited by 643
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Biofabrication of bone tissue: approaches, challenges and translation for bone regeneration
Tang, D., Tare, R. S., Yang, L.-Y., Williams, D. F., Ou, K.-L., & Oreffo, R. O. C. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.024 · Cited by 613
Biodegradable Metals for Cardiovascular Stent Application: Interests and New Opportunities
Moravej, M., & Mantovani, D. (2011) · International Journal of Molecular Sciences · doi:10.3390/ijms12074250 · Cited by 600
Minimal surface scaffold designs for tissue engineering
Kapfer, S. C., Hyde, S. T., Mecke, K., Arns, C. H., & Schröder-Turk, G. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.012 · Cited by 579
Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., & Ashcroft, I. A. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.04.003 · Cited by 575
3D Printing of Polymer Nanocomposites via Stereolithography
Manapat, J. Z., Chen, Q., Ye, P., & Advincula, R. C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600553 · Cited by 565
Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
Melchels, F. P. W., Bertoldi, K., Gabbrielli, R., Velders, A. H., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.068 · Cited by 530
Biomaterials and bone mechanotransduction
Sikavitsas, V. I., Temenoff, J. S., & Mikos, A. G. (2001) · Biomaterials · doi:10.1016/s0142-9612(01)00002-3 · Cited by 519
Liu, Y., Yang, Y., Mai, S., Wang, D., & Song, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.086 · Cited by 498
Infinite periodic minimal surfaces without self-intersections
Schoen, A. H. (1970) · NASA Technical Reports Server (NASA) · Cited by 492
Kuboki, Y., Takita, H., Kobayashi, D., Tsuruga, E., Inoue, M., Murata, M., Nagai, N., Dohi, Y., & Ohgushi, H. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199802)39:2<190::aid-jbm4>3.0.co;2-k · Cited by 490
Biamino, S., Penna, A., Ackelid, U., Sabbadini, S., Tassa, O., Fino, P., Pavese, M., Gennaro, P., & Badini, C. (2011) · Intermetallics · doi:10.1016/j.intermet.2010.11.017 · Cited by 486
Design and properties of 3D scaffolds for bone tissue engineering
Gómez, S., Vlad, M. D., López, J., & Fernández, E. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.06.032 · Cited by 477
New perspectives in mercury porosimetry
León y León, C. A. (1998) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(98)00052-9 · Cited by 464
Lasers in additive manufacturing: A review
Lee, H., Lim, C. H. J., Low, M. J., Tham, N., Murukeshan, V. M., & Kim, Y.-J. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0037-7 · Cited by 449
Low stiffness porous Ti structures for load-bearing implants
Krishna, B. V., Bose, S., & Bandyopadhyay, A. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.03.008 · Cited by 441
Progress of biodegradable metals
Li, H., Zheng, Y., & Qin, L. (2014) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2014.08.014 · Cited by 432
RAJAGOPALAN, S., & ROBB, R. (2006) · Medical Image Analysis · doi:10.1016/j.media.2006.06.001 · Cited by 392
Ataee, A., Li, Y., Brandt, M., & Wen, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.005 · Cited by 383
Self-citationA review of powder additive manufacturing processes for metallic biomaterials
Harun, W. S. W., Kamariah, M. S. I. N., Muhamad, N., Ghani, S. A. C., Ahmad, F., & Mohamed, Z. (2018) · Powder Technology · doi:10.1016/j.powtec.2017.12.058 · Cited by 379
Yeong, W. Y., Sudarmadji, N., Yu, H. Y., Chua, C. K., Leong, K. F., Venkatraman, S. S., Boey, Y. C. F., & Tan, L. P. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.033 · Cited by 355
Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing
Jardini, A. L., Larosa, M. A., Filho, R. M., Zavaglia, C. A. D. C., Bernardes, L. F., Lambert, C. S., Calderoni, D. R., & Kharmandayan, P. (2014) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/j.jcms.2014.07.006 · Cited by 350
Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting
Sallica-Leva, E., Jardini, A. L., & Fogagnolo, J. B. (2013) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2013.05.011 · Cited by 340
The Prospects of Zinc as a Structural Material for Biodegradable Implants—A Review Paper
Katarivas Levy, G., Goldman, J., & Aghion, E. (2017) · Metals · doi:10.3390/met7100402 · Cited by 340
Microporosity enhances bioactivity of synthetic bone graft substitutes
Hing, K. A., Annaz, B., Saeed, S., Revell, P. A., & Buckland, T. (2005) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-005-6988-1 · Cited by 325
Li, D., Liao, W., Dai, N., Dong, G., Tang, Y., & Xie, Y. M. (2018) · Computer-Aided Design · doi:10.1016/j.cad.2018.06.003 · Cited by 303
Omar, O. M., MOHAMED, M., SyedH., Masood, ., & Bhowmik (2015) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 302
Additively manufactured biodegradable porous iron
Li, Y., Jahr, H., Lietaert, K., Pavanram, P., Yilmaz, A., Fockaert, L. I., Leeflang, M. A., Pouran, B., Gonzalez-Garcia, Y., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.011 · Cited by 299
Porous scaffold design using the distance field and triply periodic minimal surface models
Yoo, D. J. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.07.019 · Cited by 298
Facchini, L., Magalini, E., Robotti, P., & Molinari, A. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910960262 · Cited by 290
Review on powder-based electron beam additive manufacturing technology
Gong, X., Anderson, T., & Chou, K. (2014) · Manufacturing Review · doi:10.1051/mfreview/2014001 · Cited by 290
Compressibility of porous magnesium foam: dependency on porosity and pore size
Wen, C. E., Yamada, Y., Shimojima, K., Chino, Y., Hosokawa, H., & Mabuchi, M. (2004) · Materials Letters · doi:10.1016/s0167-577x(03)00500-7 · Cited by 271
Self-citationArdila, L. C., Garciandia, F., González-Díaz, J. B., Álvarez, P., Echeverria, A., Petite, M. M., Deffley, R., & Ochoa, J. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.152 · Cited by 268
Speirs, M., Van Hooreweder, B., Van Humbeeck, J., & Kruth, J.-P. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.01.016 · Cited by 267
Murr, L. E., Gaytan, S. M., Medina, F., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., & Wicker, R. B. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.11.015 · Cited by 258
A review on powder bed fusion technology of metal additive manufacturing
Bhavar, V., Kattire, P., Patil, V., Khot, S., Gujar, K., & Singh, R. (2017) · Additive Manufacturing Handbook · doi:10.1201/9781315119106-15 · Cited by 258
Processing and mechanical properties of autogenous titanium implant materials
Wen, C. E., Yamada, Y., Shimojima, K., Chino, Y., Asahina, T., & Mabuchi, M. (2002) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1014344819558 · Cited by 254
Self-citationYánez, A., Cuadrado, A., Martel, O., Afonso, H., & Monopoli, D. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.050 · Cited by 252
There is no such thing as a biocompatible material
Williams, D. F. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.08.035 · Cited by 248
Additive manufacturing of cardiovascular CoCr stents by selective laser melting
Demir, A. G., & Previtali, B. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.091 · Cited by 235
Torres-Sanchez, C., Al Mushref, F. R. A., Norrito, M., Yendall, K., Liu, Y., & Conway, P. P. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.03.249 · Cited by 217
Novel titanium foam for bone tissue engineering
Wen, C. E., Yamada, Y., Shimojima, K., Chino, Y., Hosokawa, H., & Mabuchi, M. (2002) · Journal of Materials Research · doi:10.1557/jmr.2002.0382 · Cited by 210
Self-citationBandyopadhyay, A., Bose, S., & Das, S. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.3 · Cited by 198
Chohan, J. S., Singh, R., Boparai, K. S., Penna, R., & Fraternali, F. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.02.045 · Cited by 185
Mechanical Properties of a New Type of Architected Interpenetrating Phase Composite Materials
Al‐Ketan, O., Al‐Rub, R. K. A., & Rowshan, R. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201600235 · Cited by 183
Weißmann, V., Bader, R., Hansmann, H., & Laufer, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.095 · Cited by 170
High specific strength and stiffness structures produced using selective laser melting
Challis, V. J., Xu, X., Zhang, L., Roberts, A. P., Grotowski, J. F., & Sercombe, T. B. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.05.064 · Cited by 169
Porosity of human mandibular condylar bone
Renders, G. A. P., Mulder, L., Van Ruijven, L. J., & Van Eijden, T. M. G. J. (2007) · Journal of Anatomy · doi:10.1111/j.1469-7580.2007.00693.x · Cited by 164
Compressive behaviour of gyroid lattice structures for human cancellous bone implant applications
Yánez, A., Herrera, A., Martel, O., Monopoli, D., & Afonso, H. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.06.016 · Cited by 156
Surmeneva, M. A., Анатольевич, С. Р., Chudinova, E., Koptioug, A., Tkachev, M. S., Gorodzha, S. N., & Rännar, L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.07.059 · Cited by 155
Wen, P., Jauer, L., Voshage, M., Chen, Y., Poprawe, R., & Schleifenbaum, J. H. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.03.007 · Cited by 152
Wieding, J., Lindner, T., Bergschmidt, P., & Bader, R. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.12.010 · Cited by 145
Yoo, D.-J., & Kim, K.-H. (2015) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-015-0263-2 · Cited by 131
Investigation on the orientation dependence of elastic response in Gyroid cellular structures
Yang, L., Yan, C., Fan, H., Li, Z., Cai, C., Chen, P., Shi, Y., & Yang, S. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.09.042 · Cited by 125
Biomaterials Fabrication and Processing Handbook
Chu, P. K.-H., & Liu, X. (2008) · CRC Press eBooks · doi:10.1201/9780849379741 · Cited by 122
Comparison of mechanical properties of human, bovine bone and a new processed bone xenograft
Poumarat, G., & Squire, P. (1993) · Biomaterials · doi:10.1016/0142-9612(93)90051-3 · Cited by 122
NiTi–Al interface strength in ultrasonic additive manufacturing composites
Hahnlen, R., & Dapino, M. J. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.10.024 · Cited by 103
3D-printed porous bed structures
Fee, C. J. (2017) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2017.07.003 · Cited by 78
Hehr, A., & Dapino, M. J. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.03.005 · Cited by 76
Extraordinary high strength Ti-Zr-Ta alloys through nanoscaled, dual-cubic spinodal reinforcement
Biesiekierski, A., Ping, D., Li, Y., et al. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.085 · Cited by 68
Bone responses in health and infectious diseases: A focus on osteoblasts
Terrier, C. S.-P., & Gasque, P. (2017) · Journal of Infection · doi:10.1016/j.jinf.2017.07.007 · Cited by 67
Properties of Titanium Dental Implant Models Made by Laser Processing
Laoui, T., Santos, E. C., Osakada, K., Shiomi, M., Morita, M., Shaik, S. K., Толочко, Н. К., Abe, F., & Takahashi, M. (2006) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/09544062jmes133 · Cited by 47
Biesiekierski, A., Lin, J., Li, Y., et al. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.09.012 · Cited by 29
Changing trends in total knee replacement
Goudie, E. B., Robinson, C., Walmsley, P. J., & Brenkel, I. J. (2017) · European Journal of Orthopaedic Surgery & Traumatology · doi:10.1007/s00590-017-1934-8 · Cited by 28
Microstructure and Mechanical Properties of Porous Titanium Based on Controlling Young's Modulus
Xu, G., Hongchao, K., Xianghong, L., Li, F., Li, J., & Lian, Z. (2017) · 稀有金属材料与工程 · doi:10.1016/s1875-5372(17)30176-5 · Cited by 14
Inorganic and Composite Bioactive Scaffolds for Bone Tissue Engineering
Bretcanu, O., Chen, Q., & Boccaccini, A. R. (2008) · CRC Press eBooks · doi:10.1201/9780849379741.pt1 · Cited by 11
Calcium, Bone Strength and Fractures
Armas, L. A. G., Lappe, J. M., & Heaney, R. P. (2010) · Elsevier eBooks · doi:10.1016/b978-0-12-374602-3.00019-5 · Cited by 11
Cited by
Normal Bone Anatomy and Physiology
Clarke, B. (2008) · Clinical Journal of the American Society of Nephrology · doi:10.2215/cjn.04151206 · Cited by 2,192
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Jafari, D., Vaneker, T. H. J., & Gibson, I. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109471 · Cited by 605
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Metadata
- Authors
- Yuan, L., Ding, S., & Wen, C.
- Venue
- Bioactive Materials
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 4
- Issue
- 1
- Pages
- 56-70
- ISSN
- 2097-1192 (ISSN-L)
- 2452-199X
- OpenAlex
- W2906529300
- Cited by
- 593
- References
- 98
- FWCI
- 24.62
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.