Pyrolytic temperature evaluation of macauba biochar for uranium adsorption from aqueous solutions
Open accessThe DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
This study aims to evaluate the effect of the pyrolytic temperature on the biochar derived from the macauba endocarp for the removal of uranium (VI) from aqueous solutions. The endocarp was subjected to six different pyrolytic temperatures, ranging from 250 °C to 750 °C. The biochars obtained at each temperature were evaluated for their adsorption capacities (“q”). The highest adsorption capacities were obtained for the biochar produced at 250 °C (BC250), followed by the one obtained at 350 °C (BC350), with removal efficiencies of 86% and 80%, respectively. The best condition was achieved when the endocarp was subjected to temperatures between 300 and 350 °C, at which it was possible to obtain a satisfactory balance among adsorption capacity, gravimetric yield and fixed carbon content. This characteristic, combined with the high removal efficiency, points to an ideal working temperature of 350 °C. Elemental analysis showed a decrease of the H/C and O/C ratios when higher pyrolytic temperatures were applied, indicating an inverse relationship between the carbonization and the surface polar functional groups, which were likely responsible for an increased adsorptive capacity in biochars produced at lower temperatures. Both FTIR and XPS analysis indicated that oxygen-containing groups such as hydroxyls and carboxylic acids were involved with the binding of uranyl ions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dynamic Molecular Structure of Plant Biomass-Derived Black Carbon (Biochar)
Keiluweit, M., Nico, P. S., Johnson, M. G., & Kleber, M. (2010) · Environmental Science & Technology · doi:10.1021/es9031419 · Cited by 3,230 · cited 1×
“Likewise, different pyrolytic conditions applied to the same biomass have a large effect on biochar’s properties, such as surface area and porosity, which are all important parameters affecting biochar’s sorption characteristics [34, 35, 36].”
BackgroundA review of biochar and its use and function in soil
Sohi, S. P., Krull, E., Lopez-Capel, E., & Bol, R. (2010) · Advances in Agronomy · doi:10.1016/s0065-2113(10)05002-9 · Cited by 2,240 · cited 1×
“Likewise, different pyrolytic conditions applied to the same biomass have a large effect on biochar’s properties, such as surface area and porosity, which are all important parameters affecting biochar’s sorption characteristics [34, 35, 36].”
BackgroundThe forms of alkalis in the biochar produced from crop residues at different temperatures
Yuan, J.-H., Xu, R.-K., & Zhang, H. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.11.018 · Cited by 2,029
Chen, B., Zhou, D., & Zhu, L. (2008) · Environmental Science & Technology · doi:10.1021/es8002684 · Cited by 1,823
Characteristics and adsorption capacities of low-cost sorbents for wastewater treatment: A review
De Gisi, S., Lofrano, G., Grassi, M., & Notarnicola, M. (2016) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2016.06.002 · Cited by 1,676 · cited 1×
“Low-cost by-products from agricultural activities have been studied as a sustainable solution for wastewater treatment, as they can remove contaminants and pollutants from wastewater while at the same time contributing to waste reduction, recovery and reuse [13].”
BackgroundThe Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623
A review of biochar as a low-cost adsorbent for aqueous heavy metal removal
Inyang, M. I., Gao, B., Yao, Y., Xue, Y., Zimmerman, A., Mosa, A., Pullammanappallil, P., Ok, Y. S., & Cao, X. (2016) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2015.1096880 · Cited by 1,397 · cited 1×
“Several studies have demonstrated that biochars can be employed as low-cost wastewater treatment because they effectively remove heavy metals from aqueous solutions [17,18].”
BackgroundAhmad, M., Lee, S. S., Dou, X., Mohan, D., Sung, J.-K., Yang, J. E., & Ok, Y. S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.042 · Cited by 1,357 · cited 1×
“These spectra are in agreement with the changes in the elemental composition and with the process of decomposition of crude biomass, indicating that the increase of the pyrolytic temperature causes the decrease of the acidity and the polarity in the surface of the produced biochar, at the same time that it increases t…”
BackgroundProperties of dairy-manure-derived biochar pertinent to its potential use in remediation
Cao, X., & Harris, W. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.02.052 · Cited by 1,173
Review of the stability of biochar in soils: predictability of O:C molar ratios
Spokas, K. A. (2010) · Carbon Management · doi:10.4155/cmt.10.32 · Cited by 1,160 · cited 1×
“Also, H/C and O/C ratios steadily diminish as the temperature increases, reflecting the loss of easily degradable compounds by dehydration and decarboxylation reactions [32].”
BackgroundOxidation of black carbon by biotic and abiotic processes
Cheng, C.-H., Lehmann, J., Thies, J. E., Burton, S. D., & Engelhard, M. H. (2006) · Organic Geochemistry · doi:10.1016/j.orggeochem.2006.06.022 · Cited by 1,129
Characterization of biochars to evaluate recalcitrance and agronomic performance
Enders, A., Hanley, K., Whitman, T., Joseph, S., & Lehmann, J. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.03.022 · Cited by 1,113
Relative distribution of Pb2+ sorption mechanisms by sludge-derived biochar
Lu, H., Zhang, W., Yang, Y., Huang, X., Wang, S., & Qiu, R. (2012) · Water Research · doi:10.1016/j.watres.2011.11.058 · Cited by 1,102
Compositions and sorptive properties of crop residue-derived chars
Chun, Y., Sheng, G., Chiou, C. T., & Xing, B. (2004) · Environmental Science & Technology · doi:10.1021/es035034w · Cited by 1,079 · cited 1×
“The hydrophilicity of the biochar's surface can be inferred from the O/C molar fraction, because O content is indicative of the presence of polar groups [62,63].”
BackgroundPhysical and chemical characterization of biochars derived from different agricultural residues
Jindo, K., Mizumoto, H., Sawada, Y., Sanchez-Monedero, M. A., & Sonoki, T. (2014) · Biogeosciences · doi:10.5194/bg-11-6613-2014 · Cited by 822
Angın, D. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.10.150 · Cited by 733 · cited 1×
“A large number of feedstock types have been used in the production of BC [33].”
MethodKinetic and adsorptive characterization of biochar in metal ions removal
Kołodyńska, D., Wnętrzak, R., Leahy, J. J., Hayes, M. H. B., Kwapiński, W., & Hubicki, Z. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.05.025 · Cited by 683 · cited 1×
“In recent years, there has been an increased interest in biochar, due to its many potential applications including carbon sequestration and enhancement of soil fertility [14], production of energy [15] and environmental remediation [16].”
BackgroundThe effect of pyrolysis conditions on biochar stability as determined by three methods
Crombie, K., Mašek, O., Sohi, S. P., Brownsort, P., & Cross, A. (2013) · GCB Bioenergy · doi:10.1111/gcbb.12030 · Cited by 533
Self-citationHarvey, O. R., Herbert, B. E., Rhue, R. D., & Kuo, L.-J. (2011) · Environmental Science & Technology · doi:10.1021/es104401h · Cited by 507 · cited 1×
“This is due to the greater extent of carbonization and the loss of polar functional groups at elevated temperatures [64-66], as shown at the Van Krevelen graph in Figure 2.”
BackgroundPyrolytic temperatures impact lead sorption mechanisms by bagasse biochars
Ding, W., Dong, X., Ime, I. M., Gao, B., & Ma, L. Q. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2013.12.042 · Cited by 443
Fuertes, A. B., Arbestain, M. C., Sevilla, M., Maciá-Agulló, J. A., Fiol, S., López, R., Smernik, R. J., Aitkenhead, W. P., Arce, F., & Macias, F. (2010) · Soil Research · doi:10.1071/sr10010 · Cited by 430 · cited 1×
“literature describe an exponential increase of AC with the pyrolytic temperature [41-45].”
BackgroundKim, W.-K., Shim, T., Kim, Y.-S., Hyun, S., Ryu, C., Park, Y.-K., & Jung, J. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.03.186 · Cited by 366
Biochars derived from various crop straws: Characterization and Cd(II) removal potential
Sun, J., Lian, F., Liu, Z., Zhu, L., & Song, Z. (2014) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2014.04.042 · Cited by 255
Cited by
Methods to prepare biosorbents and magnetic sorbents for water treatment: a review
Osman, A. I., El-Monaem, E. M. A., Elgarahy, A. M., Aniagor, C. O., Hosny, M., Farghali, M., Rashad, E., Ejimofor, M. I., López-Maldonado, E. A., Ihara, I., et al. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01603-4 · Cited by 329
Biochar heavy metal removal in aqueous solution depends on feedstock type and pyrolysis purging gas
Islam, M. S., Kwak, J.-H., Nzediegwu, C., Wang, S., Palansuriya, K., Kwon, E. E., Naeth, M. A., El-Din, M. G., Ok, Y. S., & Chang, S. X. (2021) · Environmental Pollution · doi:10.1016/j.envpol.2021.117094 · Cited by 161
Isa, S. A., Hafeez, M. A., Singh, B. K., Kwon, S. Y., Choung, S., & Um, W. (2022) · Environmental Advances · doi:10.1016/j.envadv.2022.100196 · Cited by 20
Jun, B.-M., Jung, J.-Y., Oh, M., Eun, H.-C., Moon, S., Rho, H., Chon, K., Nam, S.-N., & Yoon, Y. (2025) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2025.107956 · Cited by 20
Metadata
- Authors
- Guilhen, S. N., Mašek, O., Ortiz, N., Izidoro, J. C., & Fungaro, D. A.
- Venue
- Biomass and Bioenergy
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 122
- Pages
- 381-390
- ISSN
- 0961-9534 (ISSN-L)
- OpenAlex
- W2781624350
- Cited by
- 73
- References
- 23
- FWCI
- 3.60
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.