The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Impact of Surface Functional Groups and Their Introduction Methods on the Mechanisms of CO2 Adsorption on Porous Carbonaceous Adsorbents
Open accessAbstract
The utilisation of solid adsorbents for the selective removal of CO2 from major emission points is an attractive method for post-combustion carbon capture due to the inherent potential for retrofit and cost-effectiveness. Although focus in the scientific community is often centred on extremely novel, high-performance and costly material development, the exploitation of carbonaceous adsorbents is another avenue of research proving to be extremely promising. This is even more pronounced when considering the abundance of carbon in various waste streams. The production of carbonaceous adsorbents, however, often requires significant post-treatments to enhance both the textural and physico-chemical properties of the adsorbent, as such, the incorporation of surface functionalities is unavoidable and can often lead to significant improvements to the associated CO2 adsorption. This review aims to critically assess the various routes for surface modification of carbonaceous adsorbents and the implications these may have on the incorporation of surface functional groups. Subsequently, the adsorption mechanisms for CO2 on surface-modified porous carbons are discussed in depth with consideration to the influence of the introduced functionalities. The review concludes with a detailed section on current modelling approaches such as the application of artificial intelligence, Monte Carlo, and Density Functional Theory simulations in this realm of research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biochar as a sorbent for contaminant management in soil and water: A review
Ahmad, M., Rajapaksha, A. U., Lim, J. E., Zhang, M., Bolan, N., Mohan, D., Vithanage, M., Lee, S. S., & Ok, Y. S. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2013.10.071 · Cited by 4,662
Evolution of nitrogen functionalities in carbonaceous materials during pyrolysis
Pels, J. R., Kapteijn, F., Moulijn, J. A., Zhu, Q., & Thomas, K. M. (1995) · Carbon · doi:10.1016/0008-6223(95)00154-6 · Cited by 2,041
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Development of biochar-based functional materials: toward a sustainable platform carbon material
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00195 · Cited by 1,754
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
Surface chemistry variations among a series of laboratory-produced biochars
Mukherjee, A., Zimmerman, A. R., & Harris, W. (2011) · Geoderma · doi:10.1016/j.geoderma.2011.04.021 · Cited by 1,171
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Ahmed, M. B., Zhou, J. L., Ngo, H. H., Guo, W., & Chen, M. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.05.057 · Cited by 843
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Carbon dioxide capture using biochar produced from sugarcane bagasse and hickory wood
Creamer, A. E., Gao, B., & Zhang, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.105 · Cited by 432
Younas, M., Rezakazemi, M., Daud, M., Wazir, M. B., Ahmad, S., Ullah, N., Inamuddin, & Ramakrishna, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100849 · Cited by 421
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Self-citationPietrzak, R. (2009) · Fuel · doi:10.1016/j.fuel.2009.04.017 · Cited by 288
Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
Liu, W.-J., Jiang, H., Tian, K., Ding, Y.-W., & Yu, H.-Q. (2013) · Environmental Science & Technology · doi:10.1021/es401286p · Cited by 276
High-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
Chemical transformation of CO2 during its capture by waste biomass derived biochars
Xu, X., Kan, Y., Zhao, L., & Cao, X. (2016) · Environmental Pollution · doi:10.1016/j.envpol.2016.03.013 · Cited by 220
Raganati, F., Alfe, M., Gargiulo, V., Chirone, R., & Ammendola, P. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.04.165 · Cited by 209
Yuan, X., Lee, J. G., Yun, H., Deng, S., Kim, Y. J., Lee, J. E., Kwak, S. K., & Lee, K. B. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125350 · Cited by 194
Development of microporous carbons for CO2 capture by KOH activation of African palm shells
Ello, A. S., de Souza, L. K. C., Trokourey, A., & Jaroniec, M. (2013) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2013.07.003 · Cited by 165
Yuan, X., Li, S., Jeon, S., Deng, S., Zhao, L., & Lee, K. B. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123010 · Cited by 162
Activated carbon produced from paulownia sawdust for high-performance CO2 sorbents
Zhu, X.-L., Wang, P.-Y., Peng, C., Yang, J., & Yan, X.-B. (2014) · Chinese Chemical Letters · doi:10.1016/j.cclet.2014.03.039 · Cited by 112
Zhang, X., Zhang, S., Yang, H., Shao, J., Chen, Y., Feng, Y., Wang, X., & Chen, H. (2015) · Energy · doi:10.1016/j.energy.2015.08.028 · Cited by 109
Zhang, X., Wu, J., Yang, H., Shao, J., Wang, X., Chen, Y., Zhang, S., & Chen, H. (2016) · RSC Advances · doi:10.1039/c6ra23748g · Cited by 95
Cited by
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Kundu, S., Khandaker, T., Anik, M. A.-A. M., Hasan, M. K., Dhar, P. K., Dutta, S. K., Latif, M. A., & Hossain, M. S. (2024) · RSC Advances · doi:10.1039/d4ra04537h · Cited by 181
Zhang, C., Ji, Y., Li, C., Zhang, Y., Sun, S., Xu, Y., Jiang, L., & Wu, C. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c00445 · Cited by 138
Direct air capture of CO2 by KOH-activated bamboo biochar
Zhang, C., Sun, S., He, S., & Wu, C. (2022) · Journal of the Energy Institute · doi:10.1016/j.joei.2022.10.017 · Cited by 108
Metadata
- Authors
- Petrovic, B., Gorbounov, M., & Masoudi Soltani, S.
- Venue
- Carbon Capture Science & Technology
- Publisher
- Elsevier BV
- Published
- 2022-06
- Volume
- 3
- Pages
- 100045
- ISSN
- 2772-6568 (ISSN-L)
- OpenAlex
- W4220785779
- Cited by
- 208
- References
- 28
- FWCI
- 15.60
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.