The DOI matches its Crossref record; 118 of the 118 references it cites were found in a registry or an index.
Battery thermal management systems (BTMs) based on phase change material (PCM): A comprehensive review
Abstract
It is known that the performance of a power battery is greatly affected by temperature. The battery pack needs an efficient thermal management system to make the power battery work in a reasonable temperature range. Battery thermal management system (BTMs) based on phase change materials (PCM), as a passive thermal management method, has the advantages of low operating cost and good temperature uniformity. This paper mainly introduces the BTMs based on PCM, including the cooling and heating system based on PCM. For the cooling system of PCM, the performance of composite phase change materials (CPCM) and its heat transfer enhancement, phase change fluid (PCF), flexible phase change materials (FPCM), and hybrid cooling systems are analyzed. For the PCM heating system, the PCM latent heat for preheating of the power battery in a cold environment has also been discussed. Finally, this paper concluded that the next research directions should focus on the improvement of thermal conductivity of PCM, flame retardancy of organic PCM, thermal stability of inorganic PCM, PCF and FPCM, and PCM-based coupled battery thermal management.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548
A critical review of battery thermal performance and liquid based battery thermal management
Wu, W., Wang, S., Wu, W., Chen, K., Hong, S., & Lai, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.051 · Cited by 1,214
Self-citationA review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Self-citationBattery thermal models for hybrid vehicle simulations
Pesaran, A. A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00200-8 · Cited by 1,116
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Enhance heat transfer for PCM melting in triplex tube with internal–external fins
Mat, S., Al-Abidi, A. A., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.003 · Cited by 604
Wu, S., Li, T., Tong, Z., Chao, J., Zhai, T., Xu, J., Yan, T., Wu, M., Xu, Z., Bao, H., et al. (2019) · Advanced Materials · doi:10.1002/adma.201905099 · Cited by 545
Heyhat, M. M., Mousavi, S., & Siavashi, M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101235 · Cited by 527
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Rao, Z., Wang, S., Wu, M., Lin, Z., & Li, F. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.08.014 · Cited by 486
Self-citationIntegration issues of lithium-ion battery into electric vehicles battery pack
Saw, L. H., Ye, Y., & Tay, A. A. O. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.11.011 · Cited by 477
Zou, D., Ma, X., Liu, X., Zheng, P., & Hu, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.024 · Cited by 461
Self-citationWu, W., Yang, X., Zhang, G., Chen, K., & Wang, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.02.022 · Cited by 455
Self-citationElectric vehicles batteries thermal management systems employing phase change materials
Ianniciello, L., Biwolé, P. H., & Achard, P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.071 · Cited by 426
Kong, D., Peng, R., Ping, P., Du, J., Chen, G., & Wen, J. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112280 · Cited by 423
Wu, W., Wu, W., & Wang, S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.071 · Cited by 378
Self-citationElectric vehicle battery thermal management system with thermoelectric cooling
Lyu, Y., Siddique, A. R. M., Majid, S. H., Biglarbegian, M., Gadsden, S. A., & Mahmud, S. (2019) · Energy Reports · doi:10.1016/j.egyr.2019.06.016 · Cited by 374
Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles
Javani, N., Dincer, I., Naterer, G. F., & Yilbas, B. S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.12.076 · Cited by 370
An intrinsically flexible phase change film for wearable thermal managements
Kou, Y., Sun, K., Luo, J., Zhou, F., Huang, H., Wu, Z.-S., & Shi, Q. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.014 · Cited by 318
Self-citationA comparative study on battery thermal management using phase change material (PCM)
Verma, A., Shashidhara, S., & Rakshit, D. (2019) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2019.03.003 · Cited by 315
Ling, Z., Chen, J., Fang, X., Zhang, Z., Xu, T., Gao, X., & Wang, S. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.01.075 · Cited by 311
Self-citationWu, S., Li, T., Wu, M., Xu, J., Hu, Y., Chao, J., Yan, T., & Wang, R. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta05904h · Cited by 310
Hussain, A., Abidi, I. H., Tso, C. Y., Chan, K. C., Luo, Z., & Chao, C. Y. H. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.09.019 · Cited by 293
Qin, P., Liao, M., Zhang, D., Liu, Y., Sun, J., & Wang, Q. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.05.084 · Cited by 284
Huang, Q., Li, X., Zhang, G., Zhang, J., He, F., & Li, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.048 · Cited by 276
Recent developments in the passive and hybrid thermal management techniques of lithium-ion batteries
Patel, J. R., & Rathod, M. K. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228820 · Cited by 276
A review on lithium-ion power battery thermal management technologies and thermal safety
An, Z., Jia, L., Ding, Y., Dang, C., & Li, X. (2017) · Journal of Thermal Science · doi:10.1007/s11630-017-0955-2 · Cited by 274
Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems
Rehman, T.-U., Ali, H. M., Saieed, A., Pao, W., & Ali, M. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.07.120 · Cited by 274
Zhao, J., Lv, P., & Rao, Z. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.11.017 · Cited by 270
Wu, W., Yang, X., Zhang, G., Ke, X., Wang, Z., Situ, W., Li, X., & Zhang, J. (2016) · Energy · doi:10.1016/j.energy.2016.07.119 · Cited by 266
Zhang, W., Liang, Z., Yin, X., & Ling, G. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116380 · Cited by 262
Safdari, M., Ahmadi, R., & Sadeghzadeh, S. (2019) · Energy · doi:10.1016/j.energy.2019.116840 · Cited by 250
Azizi, Y., & Sadrameli, S. M. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.09.081 · Cited by 246
Huang, Q., Li, X., Zhang, G., Deng, J., & Wang, C. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116151 · Cited by 243
An innovative battery thermal management with thermally induced flexible phase change material
Wu, W., Liu, J., Liu, M., Rao, Z., Deng, H., Wang, Q., Qi, X., & Wang, S. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.113145 · Cited by 238
Self-citationIdi, M. M. E., Karkri, M., & Tankari, M. A. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120894 · Cited by 229
Lv, Y., Liu, G., Zhang, G., & Yang, X. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228398 · Cited by 227
Zhang, W., Qiu, J., Yin, X., & Wang, D. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114571 · Cited by 226
Design of battery thermal management system based on phase change material and heat pipe
Chen, K., Hou, J., Song, M., Wang, S., Wu, W., & Zhang, Y. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.116665 · Cited by 226
Self-citationHong, S., Zhang, X., Chen, K., & Wang, S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.09.092 · Cited by 223
Self-citationMehrabi-Kermani, M., Houshfar, E., & Ashjaee, M. (2019) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2019.03.026 · Cited by 217
Huang, R., Li, Z., Hong, W., Wu, Q., & Yu, X. (2020) · Energy Reports · doi:10.1016/j.egyr.2019.09.060 · Cited by 210
Huang, Y.-H., Cheng, W.-L., & Zhao, R. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.064 · Cited by 207
Ling, Z., Cao, J., Zhang, W., Zhang, Z., Fang, X., & Gao, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.06.143 · Cited by 205
Zou, D., Liu, X., He, R., Zhu, S., Bao, J., Guo, J., Hu, Z., & Wang, B. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.11.064 · Cited by 204
Self-citationLing, Z., Wen, X., Zhang, Z., Fang, X., & Gao, X. (2018) · Energy · doi:10.1016/j.energy.2017.12.098 · Cited by 202
Song, L., Zhang, H., & Yang, C. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.12.157 · Cited by 201
Jiang, G., Huang, J., Liu, M., & Cao, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.03.107 · Cited by 194
Tang, X., Guo, Q., Li, M., Wei, C., Pan, Z., & Wang, Y. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229727 · Cited by 193
Self-citationHe, J., Yang, X., & Zhang, G. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.11.100 · Cited by 188
Cao, J., Luo, M., Fang, X., Ling, Z., & Zhang, Z. (2019) · Energy · doi:10.1016/j.energy.2019.116565 · Cited by 188
Cao, J., Ling, Z., Fang, X., & Zhang, Z. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227673 · Cited by 188
An, Z., Chen, X., Zhao, L., & Gao, Z. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114345 · Cited by 182
Yang, W., Zhou, F., Liu, Y., Xu, S., & Chen, X. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.116649 · Cited by 182
Hekmat, S., & Molaeimanesh, G. R. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114759 · Cited by 179
Jiang, K., Liao, G., E, J., Zhang, F., Chen, J., & Leng, E. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101816 · Cited by 178
Ling, Z., Li, S., Cai, C., Shao, L., Fang, X., & Zhang, Z. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117002 · Cited by 173
Zhang, W., Liang, Z., Wu, W., Ling, G., & Ma, R. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121318 · Cited by 171
Luo, X., Guo, Q., Li, X., Tao, Z., Lei, S., Liu, J., Kang, L., Zheng, D., & Liu, Z. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.07.112 · Cited by 170
Lei, S., Shi, Y., & Chen, G. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114792 · Cited by 170
Zhang, X., Kong, X., Li, G., & Li, J. (2014) · Energy · doi:10.1016/j.energy.2013.10.088 · Cited by 162
Applications and thermal management of rechargeable batteries for industrial applications
Jouhara, H., Khordehgah, N., Serey, N., Almahmoud, S., Lester, S. P., Machen, D., & Wrobel, L. C. (2019) · Energy · doi:10.1016/j.energy.2018.12.218 · Cited by 161
Wang, Y., Wang, Z., Min, H., Li, H., & Li, Q. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102279 · Cited by 161
Self-citationZhou, H., Dai, C., Liu, Y., Fu, X., & Du, Y. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228545 · Cited by 159
Bai, F., Chen, M., Song, W., Yu, Q., Li, Y., Feng, Z., & Ding, Y. (2018) · Energy · doi:10.1016/j.energy.2018.10.137 · Cited by 158
Farag, M., Sweity, H., Fleckenstein, M., & Habibi, S. R. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.031 · Cited by 149
Li, W., Cheng, W.-L., Xie, B., Liu, N., & Zhang, L. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.019 · Cited by 149
He, F., Li, X., Zhang, G., Zhong, G., & He, J. (2018) · International Journal of Energy Research · doi:10.1002/er.4081 · Cited by 148
Ping, P., Zhang, Y., Kong, D., et al. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102448 · Cited by 148
Xiao, C., Zhang, G., Li, Z., & Yang, X. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta05247g · Cited by 147
Xie, Y., Tang, J., Shang, S., Xing, Y., Wu, H., Hu, Z., & Wen, D. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.046 · Cited by 141
Situ, W., Zhang, G., Li, X., Yang, X., Wei, C., Rao, M., Wang, Z., Wang, C., & Wu, W. (2017) · Energy · doi:10.1016/j.energy.2017.09.083 · Cited by 134
Wu, W.-F., Liu, N., Cheng, W.-L., & Liu, Y. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.01.025 · Cited by 127
Ling, Z., Lin, W., Zhang, Z., & Fang, X. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.114120 · Cited by 126
Li, J., & Zhang, H. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119820 · Cited by 126
Liu, Z., Huang, J., Cao, M. L., Jiang, G., Yan, Q., & Hu, J. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116415 · Cited by 123
Qi, X., Shao, Y.-W., Wu, H., Yang, J., & Wang, Y. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107714 · Cited by 120
Self-citationTan, L., Zhang, L., Sun, Q., Shen, M., Qu, Q., & Zheng, H. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.08.074 · Cited by 119
Malik, M., Dinçer, İ., Rosen, M. A., & Fowler, M. W. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.10.051 · Cited by 119
Behi, H., Karimi, D., Gandoman, F. H., Akbarzadeh, M., Khaleghi, S., Kalogiannis, T., Hosen, M. S., Jaguemont, J., Mierlo, J. V., & Berecibar, M. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.100920 · Cited by 119
Kolodziejczyk, F., Mortazavi, B., Rabczuk, T., & Zhuang, X. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121199 · Cited by 117
Chen, J., & Zhang, P. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.01.012 · Cited by 112
Huo, Y., & Rao, Z. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.12.009 · Cited by 109
Huang, Q., Deng, J., Li, X., Zhang, G., & Xu, F. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101755 · Cited by 109
Wang, Y., Yu, Y., Jing, Z., Wang, C., Zhou, G., & Zhao, W. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120827 · Cited by 108
Self-citationYang, Y., Chen, L., Yang, L., & Du, X. (2021) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2021.106968 · Cited by 108
Lin, X.-W., Zhang, X., Ji, J., Liu, L., Wu, Y., Yang, M., Lu, D., & Zheng, H. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127517 · Cited by 108
An intelligent thermal management system for optimized lithium-ion battery pack
Zhuang, W., Liu, Z., Su, H., & Chen, G. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.116767 · Cited by 105
Warming‐Up Effects of Phase Change Materials on Lithium‐Ion Batteries Operated at Low Temperatures
Ling, Z., Wen, X., Zhang, Z., Fang, X., & Xu, T. (2016) · Energy Technology · doi:10.1002/ente.201600083 · Cited by 102
Xiao, Y.-Y., Bai, D., Xie, Z.-P., Yang, Z., Yang, J., Qi, X., & Wang, Y. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106420 · Cited by 102
Self-citationCao, J., He, Y., Feng, J., Shao, L., Ling, Z., Zhang, Z., & Fang, X. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115808 · Cited by 98
A fast-heat battery system using the heat released from detonated supercooled phase change materials
Ling, Z., Luo, M., Song, J., Zhang, W., Zhang, Z., & Fang, X. (2020) · Energy · doi:10.1016/j.energy.2020.119496 · Cited by 94
SASMITO, A. P., Shamim, T., & MUJUMDAR, A. S. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.04.064 · Cited by 93
Du, X., Qian, Z., Chen, Z., & Rao, Z. (2018) · International Journal of Energy Research · doi:10.1002/er.4067 · Cited by 93
Huang, Q., Li, X., Zhang, G., Wang, Y., Deng, J., Wang, C., & Chen, T. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c03116 · Cited by 93
Self-citationLi, W., Fei, W., Cheng, W.-L., Chen, X., & Zhao, Q. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112680 · Cited by 92
Li, C., Mei, Z., Liu, Q., Wang, J., Xu, J., & Sun, D. (2010) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2009.12.036 · Cited by 90
Lee, C. H., Bae, S. J., & Jang, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.095 · Cited by 83
Cao, J., Feng, J., Fang, X., Ling, Z., & Zhang, Z. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.116888 · Cited by 83
Shojaeefard, . H., Molaeimanesh, G. R., & Ranjbaran, Y. S. (2019) · Heat and Mass Transfer · doi:10.1007/s00231-018-02555-0 · Cited by 82
Evaluation of lithium battery thermal management using sealant made of boron nitride and silicone
Li, X., Huang, Q., Deng, J., Zhang, G., Zhong, Z., & He, F. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.227820 · Cited by 79
Cold temperature performance of phase change material based battery thermal management systems
Ghadbeigi, L., Day, B. C., Lundgren, K., & Sparks, T. D. (2018) · Energy Reports · doi:10.1016/j.egyr.2018.04.001 · Cited by 75
Thermal Management with Phase Change Material for a Power Battery under Cold Temperatures
Rao, Z., Wang, S. F., & Zhang, Y. (2014) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2011.576411 · Cited by 67
Self-citationLuo, M., Song, J., Ling, Z., Zhang, Z., & Fang, X. (2021) · Materials Today Energy · doi:10.1016/j.mtener.2021.100652 · Cited by 67
Ji, C., Wang, B., Wang, S., Pan, S., Wang, D., Qi, P., & Zhang, K. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.04.093 · Cited by 66
Self-citationMolaeimanesh, G. R., Nasiry, S. M. M., & Dahmardeh, M. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116028 · Cited by 63
Thermophysical properties of phase change emulsions prepared by D-phase emulsification
Morimoto, T., Togashi, K., Kumano, H., & Hong, H. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.05.065 · Cited by 62
Cylindrical battery thermal management based on microencapsulated phase change slurry
Pakrouh, R., Hosseini, M. J., Bahrampoury, R., Ranjbar, A. A., & Borhani, S. M. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102602 · Cited by 62
Performance Characteristics of PTC Elements for an Electric Vehicle Heating System
Shin, Y., Ahn, S., & Kim, S. W. (2016) · Energies · doi:10.3390/en9100813 · Cited by 60
Gou, J., Liu, W., & Luo, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114102 · Cited by 57
Zhang, C., Chen, S.-R., Gao, H., Xu, K.-J., Xia, Z., & Li, S.-T. (2019) · Energies · doi:10.3390/en12101937 · Cited by 54
Cao, M. L., Huang, J., & Liu, Z. (2020) · Advances in Materials Science and Engineering · doi:10.1155/2020/8167386 · Cited by 54
Enhancement of nanoparticle-phase change material melting performance using a sinusoidal heat pipe
Ren, Q. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.11.033 · Cited by 51
Xu, X., Liu, J., Ouyang, X., Cui, L., Hong, J.-L., Meng, X., Qin, S., Liu, C., Tang, J., & Chen, D.-Z. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.135551 · Cited by 50
Chen, S., Garg, A., Gao, L., et al. (2020) · International Journal of Energy Research · doi:10.1002/er.6241 · Cited by 49
Song, S., Shen, W., Wang, J., Wang, S., & Xu, J. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.01.059 · Cited by 37
Self-citationLiu, X., & Rao, Z. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101860 · Cited by 31
Yu, C., Youn, J. R., & Song, Y. S. (2019) · Fibers and Polymers · doi:10.1007/s12221-019-1067-2 · Cited by 29
Yuan, Q., Xu, X., Tong, G., & Ding, H. (2020) · International Journal of Energy Research · doi:10.1002/er.6165 · Cited by 26
Cited by
Phase Change Thermal Storage Materials for Interdisciplinary Applications
Wang, G., Tang, Z., Gao, Y., Liu, P., Li, Y., Li, A., & Chen, X. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00572 · Cited by 550
Sadeghi, G. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.01.017 · Cited by 380
Weng, J., Huang, Q., Li, X., Zhang, G., Ouyang, D., Chen, M., Yuen, A. C. Y., Li, A., Lee, E. W. M., Yang, W., et al. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.09.007 · Cited by 297
Amba Prasad Rao, G., & Shravan Kumar, Sr. (2024) · e-Prime - Advances in Electrical Engineering, Electronics and Energy · doi:10.1016/j.prime.2024.100526 · Cited by 37
Metadata
- Authors
- Luo, J., Zou, D., Wang, Y., Wang, S., & Huang, L.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2022-02
- Volume
- 430
- Pages
- 132741
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3203688505
- Cited by
- 813
- References
- 118
- FWCI
- 36.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.