The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
A process classification framework for defining and describing Digital Fabrication with Concrete
Open accessAbstract
Digital Fabrication with Concrete (DFC) encompasses 3D Concrete Printing (3DCP) and many other methods of production. DFC is emerging from an era of invention and demonstration to one where the merits of one principle over another needs to be quantified systematically. DFC technologies vary in characteristics, complexity and maturity which hampers the synthesis of research and comparisons of performance. The interdependence of design geometry, material properties and process characteristics is well recognised. Materials research has made significant progress in recent years and there have been many applications with varying design geometries demonstrated. Far less has been done to guide the definition and description of the processes used. This work takes a step forward by presenting classification and process description guidance for DFC. The approach was developed by engaging a broad cross-section of the international community through the activities of the RILEM Technical Committee 276 between 2016 and 2020.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
Self-citationDevelopments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Self-citationHardened properties of high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,020
Self-citationGosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.02.017 · Cited by 836
Self-citationDigital Concrete: Opportunities and Challenges
Wangler, T., Lloret, E., Reiter, L., Hack, N., Gramazio, F., Kohler, M., Bernhard, M., Dillenburger, B., Buchli, J., Roussel, N., et al. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.16 · Cited by 636
Self-citationWangler, T., Roussel, N., Bos, F. P., Salet, T. A. M., & Flatt, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105780 · Cited by 612
Self-citationMechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing
Ma, G., Li, Z., Li, W., Wang, F., & Sanjayan, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.008 · Cited by 610
Additive construction: State-of-the-art, challenges and opportunities
Labonnote, N., Rønnquist, A., Manum, B., & Rüther, P. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.08.026 · Cited by 607
Nerella, V. N., Hempel, S., & Mechtcherine, V. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.235 · Cited by 605
Self-citationMechtcherine, V., Bos, F. P., Perrot, A., da Silva, W. R. L., Nerella, V. N., Fataei, S., Wolfs, R. J. M., Sonebi, M., & Roussel, N. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106037 · Cited by 598
Self-citationMarchon, D., Kawashima, S., Bessaies-Bey, H., Mantellato, S., & Ng, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.014 · Cited by 507
Design of a 3D printed concrete bridge by testing
Salet, T. A. M., Ahmed, Z. Y., Bos, F. P., & Laagland, H. L. M. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1476064 · Cited by 504
Self-citationLarge-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing
Mechtcherine, V., Nerella, V. N., Will, F., Näther, M., Otto, J., & Krause, M. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.102933 · Cited by 455
Self-citationParticle-bed 3D printing in concrete construction – Possibilities and challenges
Lowke, D., Dini, E., Perrot, A., Weger, D., Gehlen, C., & Dillenburger, B. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.018 · Cited by 447
Self-citationThe role of early age structural build-up in digital fabrication with concrete
Reiter, L., Wangler, T., Roussel, N., & Flatt, R. J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.011 · Cited by 432
Self-citationMega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378 · cited 1×
“The first inter-process comparison was presented in [6] which identified the three methods that had been developed at that time against the process proposed by [14]: 3D Concrete Printing developed at Loughborough University (UK) used extrusion of cement mortar to manufacture fully dense parts, intended for implementat…”
MethodExploratory investigation of solid freeform construction
Pegna, J. (1997) · Automation in Construction · doi:10.1016/s0926-5805(96)00166-5 · Cited by 355
Mesh reinforcing method for 3D Concrete Printing
Marchment, T., & Sanjayan, J. (2020) · Automation in Construction · doi:10.1016/j.autcon.2019.102992 · Cited by 347
Introduction to manufacturing processes
(1999) · Journal of Manufacturing Systems · doi:10.1016/s0278-6125(99)90118-8 · Cited by 336
Mechtcherine, V., Grafe, J., Nerella, V. N., Spaniol, E., Hertel, M., & Füssel, U. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.202 · Cited by 332
Self-citationImplications on design of rapid manufacturing
Hague, R., Campbell, I., & Dickens, P. (2003) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/095440603762554587 · Cited by 311
Panda, B., Noor Mohamed, N. A., Paul, S. C., Bhagath Singh, G., Tan, M. J., & Šavija, B. (2019) · Materials · doi:10.3390/ma12132149 · Cited by 301
Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete
Bos, F., Ahmed, Z., Jutinov, E., & Salet, T. (2017) · Materials · doi:10.3390/ma10111314 · Cited by 276
Self-citationToward site-specific and self-sufficient robotic fabrication on architectural scales
Keating, S. J., Leland, J. C., Cai, L., & Oxman, N. (2017) · Science Robotics · doi:10.1126/scirobotics.aam8986 · Cited by 259
Structural failure during extrusion-based 3D printing processes
Wolfs, R. J. M., & Suiker, A. S. J. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03844-6 · Cited by 244
Classification of building systems for concrete 3D printing
Duballet, R., Baverel, O., & Dirrenberger, J. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.08.018 · Cited by 238
Ogura, H., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11081375 · Cited by 227
Self-citationAn approach to develop printable strain hardening cementitious composites
Chaves Figueiredo, S., Romero Rodríguez, C., Ahmed, Z. Y., Bos, D. H., Xu, Y., Salet, T. M., Çopuroğlu, O., Schlangen, E., & Bos, F. P. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107651 · Cited by 211
Self-citationSetting on demand for digital concrete – Principles, measurements, chemistry, validation
Reiter, L., Wangler, T., Anton, A., & Flatt, R. J. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106047 · Cited by 211
Self-citationModelling curved-layered printing paths for fabricating large-scale construction components
Lim, S., Buswell, R. A., Valentine, P. J., Piker, D., Austin, S. A., & De Kestelier, X. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.06.004 · Cited by 183
Self-citationChen, Y., Chaves Figueiredo, S., Yalçinkaya, Ç., Çopuroğlu, O., Veer, F., & Schlangen, E. (2019) · Materials · doi:10.3390/ma12091374 · Cited by 167
Development of the construction processes for reinforced additively constructed concrete
Kreiger, E. L., Kreiger, M. A., & Case, M. P. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.02.015 · Cited by 147
Flexible formwork technologies – a state of the art review
Hawkins, W., Herrmann, M., Ibell, T. J., Kromoser, B., Michaelski, A., Orr, J. J., Pedreschi, R., Pronk, A., Schipper, H. R., Shepherd, P., et al. (2016) · Structural Concrete · doi:10.1002/suco.201600117 · Cited by 134
Self-citationFrom Smart Dynamic Casting to a growing family of Digital Casting Systems
Lloret‐Fritschi, E., Wangler, T. P., Gebhard, L., Mata‐Falcón, J., Mantellato, S., Scotto, F., Burger, J., Szabó, A., Ruffray, N., Reiter, L., et al. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106071 · Cited by 126
Self-citationPierre, A., Weger, D., Perrot, A., & Lowke, D. (2018) · Materials and Structures · doi:10.1617/s11527-018-1148-5 · Cited by 86
Self-citationNicolantonio, M. D., Rossi, E., & Alexander, T. (2019) · Advances in intelligent systems and computing · doi:10.1007/978-3-030-20216-3 · Cited by 30
da Silva, W. R. L., Fryda, H., Bousseau, J.-N., Andreani, P.-A., & Andersen, T. J. (2019) · Advances in intelligent systems and computing · doi:10.1007/978-3-030-20216-3_4 · Cited by 28
Additive Manufacturing Processes for Infrastructure Construction: A Review
Bhardwaj, A., Jones, S. Z., Kalantar, N., Pei, Z., Vickers, J., Wangler, T. P., Zavattieri, P. D., & Zou, N. (2019) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2019-2988 · Cited by 18
Self-citation
Cited by
Mechtcherine, V., Bos, F. P., Perrot, A., da Silva, W. R. L., Nerella, V. N., Fataei, S., Wolfs, R. J. M., Sonebi, M., & Roussel, N. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106037 · Cited by 598
Self-citationTechnology readiness: A global snapshot of 3D concrete printing and the frontiers for development
Ma, G., Buswell, R., Leal da Silva, W. R., Wang, L., Xu, J., & Jones, S. Z. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106774 · Cited by 280
Self-citationAdditive manufacturing using mobile robots: Opportunities and challenges for building construction
Dörfler, K., Dielemans, G., Lachmayer, L., Recker, T., Raatz, A., Lowke, D., & Gerke, M. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106772 · Cited by 124
Self-citation
Metadata
- Authors
- Buswell, R. A., da Silva, W. R. L., Bos, F. P., Schipper, H. R., Lowke, D., Hack, N., Kloft, H., Mechtcherine, V., Wangler, T., & Roussel, N.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 134
- Pages
- 106068
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W3027645905
- Cited by
- 254
- References
- 40
- FWCI
- 18.74
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.