The DOI matches its Crossref record; 233 of the 233 references it cites were found in a registry or an index.
An overview of process systems engineering approaches for process intensification: State of the art
Open accessAbstract
Abstract Process intensification offers the potential to drastically reduce the energy consumption and cost of producing chemicals from both bulk and distributed feedstocks. This review article aims to offer an extensive survey on state-of-the-art process systems engineering (PSE) approaches for process intensification. From both academic and industrial perspectives, this paper provides an overview of the development of various process intensification technologies, specifically those under the categories of separation, reaction, hybrid reaction/separation, and alternative energy sources. A current status analysis in the areas of modeling and simulation is then provided. An indicative list of PSE publications specialized on process intensification is presented to illustrate the progresses made so far towards the deployment of novel process intensification technologies. We also highlight some recent advances for the modeling, design, and synthesis of intensified systems, as well as for the assessment of their controllability/operability/safety performance. Key open questions in these areas include: (i) how to systematically derive intensified designs, and (ii) how to ensure the operability and optimality of the derived intensified structures while delivering their expected functionality.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
What are batteries, fuel cells, and supercapacitors?
Winter, M., & Brodd, R. J. (2004) · Chemical Reviews · doi:10.1021/cr020730k · Cited by 7,389
Seven chemical separations to change the world
Sholl, D. S., & Lively, R. P. (2016) · Nature · doi:10.1038/532435a · Cited by 4,769
Reverse osmosis desalination: Water sources, technology, and today's challenges
Greenlee, L. F., Lawler, D. F., Freeman, B. D., Marrot, B., & Moulin, P. (2009) · Water Research · doi:10.1016/j.watres.2009.03.010 · Cited by 3,409
Chemical Reactor Analysis and Design
Froment, G. F., Bischoff, K. B., & Wilde, J. D. (1979) · Digital Access to Libraries (Université catholique de Louvain (UCL), l'Université de Namur (UNamur) and the Université Saint-Louis (USL-B)) · Cited by 2,715
Fouling in membrane bioreactors used in wastewater treatment
Le-Clech, P., Chen, V., & Fane, T. A. G. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.08.019 · Cited by 2,291
Chemical reactor analysis and design
Brooks, B. W. (1991) · The Chemical Engineering Journal · doi:10.1016/0300-9467(91)85016-o · Cited by 2,156
Lee, K. P., Arnot, T. C., & Mattia, D. (2011) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.12.036 · Cited by 2,148
Membrane Gas Separation: A Review/State of the Art
Bernardo, P., Drioli, E., & Golemme, G. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8019032 · Cited by 2,147
State-of-the-art of reverse osmosis desalination
Fritzmann, C., Löwenberg, J., Wintgens, T., & Melin, T. (2007) · Desalination · doi:10.1016/j.desal.2006.12.009 · Cited by 1,977
(1999) · Choice Reviews Online · doi:10.5860/choice.36-5112 · Cited by 1,774
Gas Separation by Adsorption Processes
(1987) · Elsevier eBooks · doi:10.1016/c2013-0-04269-7 · Cited by 1,578
Significance of Liquid-Film Coefficients in Gas Absorption
Danckwerts, P. V. (1951) · Industrial & Engineering Chemistry · doi:10.1021/ie50498a055 · Cited by 1,560
Lewis, W. K., & Whitman, W. G. (1924) · Industrial & Engineering Chemistry · doi:10.1021/ie50180a002 · Cited by 1,450
The Rate of Absorption of a Pure Gas into a Still Liquid during Short Periods of Exposure
Higbie, R. (1935) · Medical Entomology and Zoology · Cited by 1,327
A framework for better understanding membrane distillation separation process
El-Bourawi, M. S., Ding, Z., Ma, R., & Khayet, M. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.08.002 · Cited by 1,315
Microreaction engineering — is small better?
Jensen, K. F. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00230-x · Cited by 1,124
Membrane distillation: Recent developments and perspectives
Drioli, E., Ali, A., & Macedonio, F. (2015) · Desalination · doi:10.1016/j.desal.2014.10.028 · Cited by 1,107
Thermodynamics of hyperfiltration (reverse osmosis): criteria for efficient membranes
Spiegler, K. S., & Kedem, O. (1966) · Desalination · doi:10.1016/s0011-9164(00)80018-1 · Cited by 1,079
A review on fuel cell technologies and power electronic interface
Kirubakaran, A., Jain, S., & Nema, R. K. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.04.004 · Cited by 1,035
Process Intensification: Transforming Chemical Engineering
Stankiewicz, A. I., & Moulijn, J. A. (2000) · Chemical engineering progress · Cited by 859
Scaling and fouling in membrane distillation for desalination applications: A review
Warsinger, D. M., Swaminathan, J., Guillén-Burrieza, E., Arafat, H. A., & Lienhard, J. H. (2014) · Desalination · doi:10.1016/j.desal.2014.06.031 · Cited by 851
A review of separation technologies in current and future biorefineries
Huang, H.-J., Ramaswamy, S., Tschirner, U. W., & Ramarao, B. V. (2008) · Separation and Purification Technology · doi:10.1016/j.seppur.2007.12.011 · Cited by 846
(2009) · Springer eBooks · doi:10.1007/978-0-387-74759-0 · Cited by 815
Gas Separation by Adsorption Processes
Yang, R. T. (1997) · Series on Chemical Engineering · doi:10.1142/p037 · Cited by 753
Membrane Distillation and Related Operations—A Review
Curcio, E., & Drioli, E. (2005) · Separation & Purification Reviews · doi:10.1081/spm-200054951 · Cited by 744
A review of ionic liquids towards supercritical fluid applications
Keskin, S., Kayrak-Talay, D., Akman, U., & Hortaçsu, Ö. (2007) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2007.05.013 · Cited by 739
Modelling reactive distillation
Taylor, R., & Krishna, R. (2000) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00120-2 · Cited by 725
Advances in surrogate based modeling, feasibility analysis, and optimization: A review
Bhosekar, A., & Ierapetritou, M. (2018) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2017.09.017 · Cited by 707
Structured Catalysts and Reactors
Cybulski, A., & Moulijn, J. A. (2005) · CRC Press eBooks · doi:10.1201/9781420028003 · Cited by 692
Recent advances on membranes and membrane reactors for hydrogen production
Gallucci, F., Fernandez, E., Corengia, P., & van Sint Annaland, M. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.01.008 · Cited by 680
Guidelines for Chemical Process Quantitative Risk Analysis
Grossel, S. S. (2001) · Journal of Loss Prevention in the Process Industries · doi:10.1016/s0950-4230(01)00002-x · Cited by 665
Shirsath, S. R., Sonawane, S. H., & Gogate, P. R. (2012) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2012.01.003 · Cited by 630
Structure, Energy, Synergy, Time—The Fundamentals of Process Intensification
Van Gerven, T., & Stankiewicz, A. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801501y · Cited by 600
Static Mixers in the Process Industries—A Review
Thakur, R. K., Vial, C., Nigam, K. D. P., Nauman, E. B., & Djelveh, G. (2003) · Chemical Engineering Research and Design · doi:10.1205/026387603322302968 · Cited by 597
Recent membrane development for pervaporation processes
Ong, Y. K., Shi, G. M., Le, N. L., Tang, Y. P., Zuo, J., Nunes, S. P., & Chung, T.-S. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.02.003 · Cited by 597
Microreactor Technology: A Revolution for the Fine Chemical and Pharmaceutical Industries?
Roberge, D. M., Ducry, L., Bieler, N., Cretton, P., & Zimmermann, B. (2005) · Chemical Engineering & Technology · doi:10.1002/ceat.200407128 · Cited by 570
On the hydrodesulfurization of FCC gasoline: a review
Brunet, S., Mey, D., Pérot, G., Bouchy, C., & Diehl, F. (2004) · Applied Catalysis A General · doi:10.1016/j.apcata.2004.10.012 · Cited by 536
Recent developments in membrane-based technologies for CO2 capture
Luis, P., Van Gerven, T., & Van der Bruggen, B. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.01.004 · Cited by 529
Monolithic reactors for environmental applications
Avila, P., Montes, M., & Miró, E. E. (2005) · Chemical Engineering Journal · doi:10.1016/j.cej.2005.02.025 · Cited by 526
Gogate, P. R. (2008) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2007.09.014 · Cited by 525
Microwave and ultrasonic processing: Now a realistic option for industry
Leonelli, C., & Mason, T. J. (2010) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2010.05.006 · Cited by 512
Pervaporation-based hybrid process: a review of process design, applications and economics
Lipnizki, F., Field, R. W., & Ten, P.-K. (1999) · Journal of Membrane Science · doi:10.1016/s0376-7388(98)00253-1 · Cited by 491
Why Does the Linear Driving Force Model for Adsorption Kinetics Work?
Sircar, S., & Hufton, J. R. (2000) · Adsorption · doi:10.1023/a:1008965317983 · Cited by 476
Monoliths in Heterogeneous Catalysis
Cybulski, A., & Moulijn, J. A. (1994) · Catalysis Reviews · doi:10.1080/01614949408013925 · Cited by 473
Fuel cell systems: efficient, flexible energy conversion for the 21st century
Ellis, M. W., Von Spakovsky, M. R., & Nelson, D. J. (2001) · Proceedings of the IEEE · doi:10.1109/5.975914 · Cited by 449
Marhavilas, P. K., Koulouriotis, D., & Gemeni, V. (2011) · Journal of Loss Prevention in the Process Industries · doi:10.1016/j.jlp.2011.03.004 · Cited by 436
Process intensification for post-combustion CO2 capture with chemical absorption: A critical review
Wang, M., Joel, A. S., Ramshaw, C., Eimer, D., & Musa, N. M. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.083 · Cited by 430
Membrane engineering in process intensification—An overview
Drioli, E., Stankiewicz, A. I., & Macedonio, F. (2011) · Journal of Membrane Science · doi:10.1016/j.memsci.2011.06.043 · Cited by 424
Dividing wall columns in chemical process industry: A review on current activities
Yildirim, Ö., Kiss, A. A., & Kenig, E. Y. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.05.009 · Cited by 420
Review of Developments in Portable Hydrogen Production Using Microreactor Technology
Holladay, J. D., Wang, Y., & Jones, E. (2004) · Chemical Reviews · doi:10.1021/cr020721b · Cited by 412
The application of monoliths for gas phase catalytic reactions
Heck, R. M., Gulati, S., & Farrauto, R. J. (2001) · Chemical Engineering Journal · doi:10.1016/s1385-8947(00)00365-x · Cited by 402
Enhanced bioethanol dehydration by extractive and azeotropic distillation in dividing-wall columns
Kiss, A. A., & Suszwalak, D. J. P. C. (2012) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.10.022 · Cited by 396
Static mixers: Mechanisms, applications, and characterization methods – A review
Ghanem, A., Lemenand, T., Della Valle, D., & Peerhossaini, H. (2014) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2013.07.013 · Cited by 374
Multiphase catalytic reactors: a perspective on current knowledge and future trends
Duduković, M. P., Larachi, F., & Mills, P. L. (2002) · Catalysis Reviews · doi:10.1081/cr-120001460 · Cited by 362
Membrane Technology in the Chemical Industry
Koros, W. J. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(01)00625-1 · Cited by 346
Basic Research Needs for Design of Adsorptive Gas Separation Processes
Sircar, S. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051056a · Cited by 324
A systematic modeling framework of superstructure optimization in process synthesis
Yeomans, H., & Grossmann, I. E. (1999) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(99)00003-4 · Cited by 324
Practical Distillation Control
(1992) · Springer eBooks · doi:10.1007/978-1-4757-0277-4 · Cited by 323
Reactive separations for process intensification: an industrial perspective
Stankiewicz, A. I. (2002) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/s0255-2701(02)00084-3 · Cited by 302
Richardson, Y., Blin, J., & Julbe, A. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.12.001 · Cited by 297
Microwave energy potential for biodiesel production
Gude, V., Patil, P., Martinez-Guerra, E., Deng, S., & Nirmalakhandan, N. (2013) · Sustainable Chemical Processes · doi:10.1186/2043-7129-1-5 · Cited by 279
Grossmann, I. E., & Guillén-Gosálbez, G. (2010) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2009.11.012 · Cited by 274
High-gravity process intensification technology and application
Zhao, H., Shao, L., & Chen, J. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.04.053 · Cited by 271
Process intensification technologies in continuous biodiesel production
Qiu, Z., Zhao, L., & Weatherley, L. (2010) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2010.03.005 · Cited by 266
Optimization of a Pressure-Swing Adsorption Process Using Zeolite 13X for CO2 Sequestration
Ko, D., Siriwardane, R., & Biegler, L. T. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0204540 · Cited by 257
Process intensification using multifunctional reactors
Dautzenberg, F. M., & Mukherjee, M. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00228-1 · Cited by 241
Monoliths as multiphase reactors: A review
Roy, S., Bauer, T., Al‐Dahhan, M., Lehner, P., & Turek, T. (2004) · AIChE Journal · doi:10.1002/aic.10268 · Cited by 238
Removal of Carbon Dioxide by Absorption in a Rotating Packed Bed
Lin, C.-C., Liu, W.-T., & Tan, C.-S. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020669+ · Cited by 237
Microfabricated devices in biotechnology and biochemical processing
Chován, T., & Guttman, A. (2002) · Trends in Biotechnology · doi:10.1016/s0167-7799(02)01905-4 · Cited by 229
Rossetti, I., & Compagnoni, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.02.119 · Cited by 229
Microstructured Reactors for Multiphase Reactions: State of the Art
Kashid, M. N., & Kiwi-Minsker, L. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8017912 · Cited by 226
Oscillatory Flow Reactors (OFRs) for Continuous Manufacturing and Crystallization
McGlone, T., Briggs, N. E. B., Clark, C. A., Brown, C. J., Sefcik, J., & Florence, A. J. (2015) · Organic Process Research & Development · doi:10.1021/acs.oprd.5b00225 · Cited by 222
State-of-the-art review on hollow fibre contactor technology and membrane-based extraction processes
Pabby, A. K., & Sastre, A. M. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.11.060 · Cited by 219
Modelling of reactive separation processes: reactive absorption and reactive distillation
Noeres, C., Kenig, E. Y., & Górak, A. (2003) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/s0255-2701(02)00086-7 · Cited by 217
Benchmarking of Microreactor Applications
Pennemann, H., Watts, P., Haswell, S. J., Hessel, V., & Löwe, H. (2004) · Organic Process Research & Development · doi:10.1021/op0341770 · Cited by 209
Hasan, M. M. F., Baliban, R. C., Elia, J. A., & Floudas, C. A. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie301572n · Cited by 204
Self-citationHasan, M. M. F., Baliban, R. C., Elia, J. A., & Floudas, C. A. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie301571d · Cited by 202
Self-citationAbsorption of carbon dioxide with piperazine and its mixtures in a rotating packed bed
Tan, C.-S., & Chen, J.-E. (2006) · Separation and Purification Technology · doi:10.1016/j.seppur.2005.10.001 · Cited by 200
Guidelines for Chemical Process Quantitative Risk Analysis
Center for Chemical Process Safety (2010) · Wiley eBooks · doi:10.1002/9780470935422 · Cited by 199
Ko, D., Siriwardane, R., & Biegler, L. T. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050012z · Cited by 197
Sonochemical reactors: scale up aspects
Gogate, P. R., & Pandit, A. B. (2004) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2004.01.005 · Cited by 194
Process intensification and process systems engineering: A friendly symbiosis
Moulijn, J. A., Stankiewicz, A., Grievink, J., & Górak, A. (2008) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2007.05.014 · Cited by 190
Re-Engineering the Chemical Processing Plant: Process Intensification
Stankiewicz, A. I., & Moulijn, J. A. (2003) · Cited by 187
Sorption-enhanced reaction process with reactive regeneration
Xiu, G.-H., Li, P., & E. Rodrigues, A. (2002) · Chemical Engineering Science · doi:10.1016/s0009-2509(02)00245-2 · Cited by 184
Recent Developments and Challenges in Optimization-Based Process Synthesis
Chen, Q., & Grossmann, I. E. (2017) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-080615-033546 · Cited by 183
Towards a methodology for the systematic analysis and design of efficient chemical processes
Freund, H., & Sundmacher, K. (2008) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2008.07.011 · Cited by 182
A superstructure‐based optimal synthesis of PSA cycles for post‐combustion CO2 capture
Agarwal, A., Biegler, L. T., & Zitney, S. E. (2010) · AIChE Journal · doi:10.1002/aic.12107 · Cited by 182
Integrated fuel processors for fuel cell application: A review
Qi, A., Peppley, B. A., & Karan, K. (2006) · Fuel Processing Technology · doi:10.1016/j.fuproc.2006.05.007 · Cited by 178
Membrane Contactors in Industrial Applications
Klaassen, R., Feron, P. H. M., & Jansen, A. E. (2005) · Chemical Engineering Research and Design · doi:10.1205/cherd.04196 · Cited by 167
HIGEE Distillation-An Example of Process Intensification
Ramshaw, C. (1983) · Medical Entomology and Zoology · Cited by 165
A retrospective on design and process synthesis
Westerberg, A. W. (2004) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2003.09.029 · Cited by 161
Hydrodynamics and mass transfer in cross-flow rotating packed bed
Guo, F., Zheng, C., Guo, K., Feng, Y., & Gardner, N. C. (1997) · Chemical Engineering Science · doi:10.1016/s0009-2509(97)00229-7 · Cited by 160
Cherbański, R., & Molga, E. (2009) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2008.01.004 · Cited by 159
From process integration to process intensification
Baldea, M. (2015) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2015.03.011 · Cited by 158
Global Optimization in Design under Uncertainty: Feasibility Test and Flexibility Index Problems
Floudas, C. A., Gumus, Z. H., & Ierapetritou, M. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie001014g · Cited by 158
On the Optimisation of Periodic Adsorption Processes
Nilchan, S., & Pantelides, C. C. (1998) · Adsorption · doi:10.1023/a:1008823102106 · Cited by 156
Pistikopoulos, E. N., Diangelakis, N. A., Oberdieck, R., Papathanasiou, M. M., Naşcu, I., & Sun, M. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2015.02.030 · Cited by 155
Self-citationDFBAlab: a fast and reliable MATLAB code for dynamic flux balance analysis
Gomez, J. A., Höffner, K., & Barton, P. I. (2014) · BMC Bioinformatics · doi:10.1186/s12859-014-0409-8 · Cited by 154
Young, L. C., & Finlayson, B. A. (1976) · AIChE Journal · doi:10.1002/aic.690220216 · Cited by 153
Gole, V. L., & Gogate, P. R. (2011) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2011.12.008 · Cited by 153
Process intensification: New understanding and systematic approach
Ponce‐Ortega, J. M., Al-Thubaiti, M., & El‐Halwagi, M. M. (2012) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2011.12.010 · Cited by 153
Cost-effective CO2 capture based on in silico screening of zeolites and process optimization
Hasan, M. M. F., First, E. L., & Floudas, C. A. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp53627k · Cited by 149
Self-citationKaisare, N. S., Deshmukh, S. R., & Vlachos, D. G. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.11.014 · Cited by 148
Subhedar, P. B., & Gogate, P. R. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie401286z · Cited by 148
Vlachos, D. G. (2005) · Advances in chemical engineering · doi:10.1016/s0065-2377(05)30001-9 · Cited by 146
Comparison of Alternative Control Structures for an Ideal Two-Product Reactive Distillation Column
Al‐Arfaj, M. A., & Luyben, W. L. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990886j · Cited by 145
Recent developments on multiscale, hierarchical modeling of chemical reactors
Raimondeau, S., & Vlachos, D. G. (2002) · Chemical Engineering Journal · doi:10.1016/s1385-8947(02)00065-7 · Cited by 144
Zhang, L., Wang, J., Xiang, Y., Zeng, X., & Chen, J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie1025979 · Cited by 142
Modeling of Sorption-Enhanced Steam Reforming in a Dual Fluidized Bubbling Bed Reactor
Johnsen, K., Grace, J. R., Elnashaie, S. S. E. H., Kolbeinsen, L., & Eriksen, D. Ø. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0511736 · Cited by 140
Simulation and optimization of pressure‐swing adsorption systems for air separation
Jiang, L., Biegler, L. T., & Fox, V. G. (2003) · AIChE Journal · doi:10.1002/aic.690490508 · Cited by 140
Perspectives in multiparametric programming and explicit model predictive control
Pistikopoulos, E. N. (2009) · AIChE Journal · doi:10.1002/aic.11965 · Cited by 138
Self-citationSchwalbe, T., Autze, V., Hohmann, M., & Stirner, W. (2004) · Organic Process Research & Development · doi:10.1021/op049970n · Cited by 133
Methane Separation from Coal Mine Methane Gas by Vacuum Pressure Swing Adsorption
Olajossy, A., Gawdzik, A., Budner, Z., & Dula, J. (2003) · Process Safety and Environmental Protection · doi:10.1205/026387603765173736 · Cited by 133
Harsh Reaction Conditions in Continuous‐Flow Microreactors for Pharmaceutical Production
Kockmann, N., & Roberge, D. M. (2009) · Chemical Engineering & Technology · doi:10.1002/ceat.200900355 · Cited by 133
Membrane Reactors for in Situ Water Removal: A Review of Applications
Diban, N., Aguayo, A. T., Bilbao, J., Urtiaga, A. M., & Ortíz, I. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3029625 · Cited by 133
Dong, Y. Q., Zhang, L., Shen, J., Song, M. Y., & Chen, H. L. (2006) · Desalination · doi:10.1016/j.desal.2005.08.023 · Cited by 132
A reliable simulator for dynamic flux balance analysis
Höffner, K., Harwood, S. M., & Barton, P. I. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24748 · Cited by 130
Badday, A. S., Abdullah, A. Z., Lee, K. T., & Khayoon, M. S. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.04.057 · Cited by 128
Simulation and Optimization of Pressure Swing Adsorption Systems Using Reduced-Order Modeling
Agarwal, A., Biegler, L. T., & Zitney, S. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie071416p · Cited by 127
Biological processing in oscillatory baffled reactors: operation, advantages and potential
Abbott, M. S. R., Harvey, A., Perez, G. V., & Theodorou, M. K. (2012) · Interface Focus · doi:10.1098/rsfs.2012.0036 · Cited by 125
A review on combustion synthesis intensification by means of microwave energy
Rosa, R., Veronesi, P., & Leonelli, C. (2013) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2013.02.007 · Cited by 123
Mathematical models of the monolith catalytic converter: Part II. Application to automobile exhaust
Young, L. C., & Finlayson, B. A. (1976) · AIChE Journal · doi:10.1002/aic.690220217 · Cited by 122
Tudela, I., Bernal, V. S., Vicente, M. D. E., Díez‐García, M. I., Bonete, P., & González‐García, J. (2013) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2013.11.012 · Cited by 118
Stonestreet, P., & Veeken, P. M. J. V. D. (1999) · Process Safety and Environmental Protection · doi:10.1205/026387699526809 · Cited by 118
Boukouvala, F., Hasan, M. M. F., & Floudas, C. A. (2015) · Journal of Global Optimization · doi:10.1007/s10898-015-0376-2 · Cited by 117
Self-citationModeling, analysis and control of ethylene glycol reactive distillation column
Kumar, A., & Daoutidis, P. (1999) · AIChE Journal · doi:10.1002/aic.690450106 · Cited by 116
Solid polymer fuel cells for transport and stationary applications
Prater, K. B. (1996) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02345-2 · Cited by 116
Membrane assisted fluidized bed reactors: Potentials and hurdles
Deshmukh, S. A. R. K., Heinrich, S., Mörl, L., Annaland, M. V. S., & Kuipers, J. A. M. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.08.062 · Cited by 115
First, E. L., Hasan, M. M. F., & Floudas, C. A. (2014) · AIChE Journal · doi:10.1002/aic.14441 · Cited by 113
Self-citationMODELING LIQUID MASS TRANSFER IN HIGEE SEPARATION PROCESS
Tung, H., & Mah, R. S. H. (1985) · Chemical Engineering Communications · doi:10.1080/00986448508911667 · Cited by 113
Modular Chemical Process Intensification: A Review
Kim, Y.-H., Park, L. K.-E., Yiacoumi, S., & Tsouris, C. (2017) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-060816-101354 · Cited by 113
A continuous-flow biodiesel production process using a rotating packed bed
Chen, Y., Huang, Y.-H., Lin, R., & Shang, N. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.08.081 · Cited by 110
Conceptual process synthesis: past and current trends
Xiao-ning, L., & Krasławski, A. (2003) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2003.05.002 · Cited by 108
Air separation by pressure swing adsorption on a carbon molecular sieve
Hassan, M. M., Ruthven, D. M., & Raghavan, N. S. (1986) · Chemical Engineering Science · doi:10.1016/0009-2509(86)87106-8 · Cited by 108
Comparative control study of ideal and methyl acetate reactive distillation
Al‐Arfaj, M. A., & Luyben, W. L. (2002) · Chemical Engineering Science · doi:10.1016/s0009-2509(02)00415-3 · Cited by 106
Modeling Ozone Contacting Process in a Rotating Packed Bed
Chen, Y. H., Chang, C. Y., Su, W. L., Chen, C. C., Chiu, C. Y., Yu, Y., Chiang, P., & Chiang, S. I. M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030545c · Cited by 98
Zhai, X., Ding, S. B., Cheng, Y., et al. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.03.034 · Cited by 97
Process Intensification through Microreactor Application
Pohar, A., & Plazl, I. (2009) · University of Zagreb University Computing Centre (SRCE) · Cited by 94
Recent Advances in Simulation and Optimal Design of Pressure Swing Adsorption Systems
Biegler, L. T., Jiang, L., & Fox, V. G. (2004) · Separation and Purification Reviews · doi:10.1081/spm-120039562 · Cited by 92
Ozone oxidation in a rotating packed bed
Lin, C., & Liu, W. (2003) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.708 · Cited by 90
Ultrasonic intensification of chemical processing and related operations : A review
Mason, T. J., & Cordemans, E. (1996) · Pure (Coventry University) · Cited by 89
The role of process intensification in cutting greenhouse gas emissions
Reay, D. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2008.01.004 · Cited by 87
Process intensification–engineering for efficiency, sustainability and flexibility
Hessel, V. (2012) · Green Processing and Synthesis · doi:10.1515/greenps-2011-0509 · Cited by 87
Applications of Pressure Swing Adsorption Technology
Voß, C. (2005) · Adsorption · doi:10.1007/s10450-005-5979-3 · Cited by 87
Stankiewicz, A. (2006) · Process Safety and Environmental Protection · doi:10.1205/cherd.05214 · Cited by 87
Novel applications of dividing‐wall column technology to biofuel production processes
Kiss, A. A. (2013) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.4108 · Cited by 86
Arzamendi, G., Diéguez, P. M., Montes, M., Odriozola, J. A., Sousa‐Aguiar, E. F., & Gandía, L. M. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.01.035 · Cited by 85
What Are Batteries, Fuel Cells, and Supercapacitors?
Winter, M., & Brodd, R. J. (2004) · ChemInform · doi:10.1002/chin.200450265 · Cited by 85
Vlachos, D. G., Mhadeshwar, A. B., & Kaisare, N. S. (2006) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2006.05.033 · Cited by 84
da Silva, C., & de Oliveira, J. V. (2014) · Brazilian Journal of Chemical Engineering · doi:10.1590/0104-6632.20140312s00002616 · Cited by 83
Nonlinear model-based control of a batch reactive distillation column
Balasubramhanya, L. S., & Doyle, F. J. (2000) · Journal of Process Control · doi:10.1016/s0959-1524(99)00024-4 · Cited by 83
Building large microkinetic models with first-principles׳ accuracy at reduced computational cost
Sutton, J. E., & Vlachos, D. G. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2014.09.011 · Cited by 81
Agarwal, A., Biegler, L. T., & Zitney, S. E. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900873j · Cited by 81
Model-based computer-aided framework for design of process monitoring and analysis systems
Singh, R., Gernaey, K. V., & Gani, R. (2008) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2008.06.002 · Cited by 81
Linear-driving-force model for non-isothermal gas adsorption kinetics
Sircar, S. (1983) · Journal of the Chemical Society Faraday Transactions 1 Physical Chemistry in Condensed Phases · doi:10.1039/f19837900785 · Cited by 81
Bringas, E., Román, M. F. S., Irabien, Á., & Ortíz, I. (2009) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.2231 · Cited by 80
(2005) · doi:10.1205/psep.04241 · Cited by 79
Zhao, B., Su, Y., & Tao, W. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.108 · Cited by 79
Safety and techno-economic analysis of ethylene technologies
Thiruvenkataswamy, P., Eljack, F., Roy, N., Mannan, M. S., & El‐Halwagi, M. M. (2015) · Journal of Loss Prevention in the Process Industries · doi:10.1016/j.jlp.2015.11.019 · Cited by 77
Saeidi, S., Nikoo, M. K., Mirvakili, A., Bahrani, S., Amin, N. A. S., & Rahimpour, M. R. (2015) · Reviews in Chemical Engineering · doi:10.1515/revce-2014-0042 · Cited by 76
Cyclic adsorption separation processes: analysis strategy and optimization procedure
Cruz, P., Santos, J. C., Magalhães, F. D., & Mendes, A. M. M. (2003) · Chemical Engineering Science · doi:10.1016/s0009-2509(03)00189-1 · Cited by 76
Önsan, Z. I., & Avci, A. K. 1. (2016) · Wiley eBooks · doi:10.1002/9781119248491 · Cited by 73
Hessel, V., Anastasopoulou, A., Wang, Q., Kolb, G., & Lang, J. (2013) · Catalysis Today · doi:10.1016/j.cattod.2013.04.005 · Cited by 71
Carbon dioxide absorption in a cross-flow rotating packed bed
Lin, C., & Chen, B.-C. (2010) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2010.11.015 · Cited by 71
Microreactor Technology and Process Intensification
Wang, Y., & Holladay, J. (2005) · ACS symposium series · doi:10.1021/bk-2005-0914 · Cited by 70
The Evolution of Process Safety: Current Status and Future Direction
Mannan, M. S., Valdes, O. J. R., Jain, P., Tamim, N., & Ahammad, M. (2016) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-080615-033640 · Cited by 69
Control of Reactive Distillation Column: A Review
Sharma, N. V., & Singh, K. (2010) · International Journal of Chemical Reactor Engineering · doi:10.2202/1542-6580.2260 · Cited by 69
Non‐dispersive absorption for CO 2 capture: from the laboratory to industry
Luis, P., der Bruggen, B. V., & Gerven, T. V. (2011) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.2614 · Cited by 66
Economic and Dynamic Impact of the Use of Excess Reactant in Reactive Distillation Systems
Luyben, W. L. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000004c · Cited by 64
Dynamic modeling and explicit/multi-parametric MPC control of pressure swing adsorption systems
Khajuria, H., & Pistikopoulos, E. N. (2010) · Journal of Process Control · doi:10.1016/j.jprocont.2010.10.021 · Cited by 63
Self-citationIntensifying Multiphase Reactions and Reactors: Strategies and Examples
Utikar, R. P., & Ranade, V. V. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03017 · Cited by 62
Iyer, S. S., Bajaj, I., Balasubramanian, P., & Hasan, M. M. F. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b01688 · Cited by 60
Self-citationNonlinear model predictive control of a reactive distillation column
Kawathekar, R., & Riggs, J. B. (2006) · Control Engineering Practice · doi:10.1016/j.conengprac.2006.07.004 · Cited by 59
An Approach for Solvent Selection in Extractive Distillation Systems Including Safety Considerations
Medina-Herrera, N., Grossmann, I. E., Mannan, M. S., & Jiménez‐Gutiérrez, A. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie501205j · Cited by 59
On the optimization of cyclic adsorption separation processes
Cruz, P., Magalhães, F. D., & Mendes, A. M. M. (2005) · AIChE Journal · doi:10.1002/aic.10400 · Cited by 56
Optimization of Multibed Pressure Swing Adsorption Processes
Nikolić, D., Kikkinides, E. S., & Georgiadis, M. C. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801357a · Cited by 53
ICAS-PAT: A software for design, analysis and validation of PAT systems
Singh, R., Gernaey, K. V., & Gani, R. (2009) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2009.06.021 · Cited by 53
Bajaj, I., Iyer, S. S., & Hasan, M. M. F. (2017) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2017.12.011 · Cited by 53
Self-citationKhaledi, R., & Young, B. R. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049274b · Cited by 52
Design and control of reactive distillation for hydrolysis of methyl lactate
Liu, M., Shao-Tong, J., Li-jun, P., Zheng, Z. X., & Shui-Zhong, L. (2011) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2011.03.001 · Cited by 52
Kurup, A. S., Hidajat, K., & Ray, A. K. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0488694 · Cited by 52
Optimal design and control of pressure swing adsorption process for N2/CH4 separation
Fu, Q., Yan, H., Shen, Y., Qin, Y., Zhang, D., & Zhou, Y. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.169 · Cited by 52
Reijers, H. T. J., Boon, J., Elzinga, G. D., Cobden, P. D., Haije, W. G., & van den Brink, R. W. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801319q · Cited by 50
van Keken, P. E., Yuen, D. A., & Petzold, L. R. (1995) · Geophysical & Astrophysical Fluid Dynamics · doi:10.1080/03091929508229763 · Cited by 48
Stefanidis, G. D., & Vlachos, D. G. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801480m · Cited by 45
Interactive multi-objective optimization for simulated moving bed processes
Hakanen, J., Kawajiri, Y., Miettinen, K., & Biegler, L. T. (2007) · Control and Cybernetics · Cited by 45
Process intensification with reactive extraction columns
Bart, H. ‐., Drumm, C., & Attarakih, M. M. (2007) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2007.11.005 · Cited by 44
Suspension polymerization of acrylamide in an oscillatory baffled reactor: From drops to particles
Ni, X., Johnstone, J. C., Symes, K. C., Grey, B. D., & Bennett, D. C. (2001) · AIChE Journal · doi:10.1002/aic.690470807 · Cited by 44
Cyclic distillation technology – a mini‐review
Bîldea, C. S., Pătruț, C., Jørgensen, S. B., Abildskov, J., & Kiss, A. A. (2016) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.4887 · Cited by 44
Using Artificial Neural Network to Predict the Pressure Drop in a Rotating Packed Bed
Lashkarbolooki, M., Vaferi, B., & Mowla, D. (2012) · Separation Science and Technology · doi:10.1080/01496395.2012.665975 · Cited by 43
Butcher, H., Quenzel, C. J. E., Breziner, L., Mettes, J., Wilhite, B. A., & Bossard, P. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.04.109 · Cited by 42
Araújo, J. M. M., Rodrigues, R. C. R., & Mota, J. P. B. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051108w · Cited by 41
State estimation and inferential control for a reactive batch distillation column
Bahar, A., & Özgen, C. (2010) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2009.11.003 · Cited by 40
A unifying framework for optimization-based design of integrated reaction–separation processes
Recker, S., Skiborowski, M., Redepenning, C., & Marquardt, W. (2015) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2015.03.014 · Cited by 40
Hasan, M. M. F., First, E. L., & Floudas, C. A. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.10.039 · Cited by 39
Self-citationFramework for evaluating the feasibility/operability of nonconvex processes
Goyal, V., & Ierapetritou, M. (2003) · AIChE Journal · doi:10.1002/aic.690490514 · Cited by 38
A multi-scale approach for the discovery of zeolites for hydrogen sulfide removal
Liu, T., First, E. L., Hasan, M. M. F., & Floudas, C. A. (2016) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2016.03.015 · Cited by 37
Self-citationPérez‐Cisneros, E. S., Sales‐Cruz, M., Lobo-Oehmichen, R., & Viveros, T. (2017) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2017.01.018 · Cited by 37
Papathanasiou, M. M., Quiroga-Campano, A. L., Steinebach, F., Elviro, M., Mantalaris, A., & Pistikopoulos, E. N. (2017) · Biotechnology Progress · doi:10.1002/btpr.2483 · Cited by 37
Self-citationProbabilistic reactor design in the framework of elementary process functions
Kaiser, N. M., Flassig, R., & Sundmacher, K. (2016) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2016.06.008 · Cited by 36
Cited by
Process systems engineering – The generation next?
Pistikopoulos, E. N., Barbosa-Povoa, A., Lee, J. H., Misener, R., Mitsos, A., Reklaitis, G. V., Venkatasubramanian, V, You, F., & Gani, R. (2021) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2021.107252 · Cited by 260
Self-citationBracconi, M. (2022) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2022.109148 · Cited by 42
Schmidt, A., Lütge, J., Uhl, A., Köster, D., & Strube, J. (2025) · Processes · doi:10.3390/pr13051498 · Cited by 18
Metadata
- Authors
- Tian, Y., Demirel, S. E., Hasan, M. M. F., & Pistikopoulos, E. N.
- Venue
- Chemical Engineering and Processing - Process Intensification
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 133
- Pages
- 160-210
- ISSN
- 0255-2701 (ISSN-L)
- OpenAlex
- W2888048300
- Cited by
- 286
- References
- 233
- FWCI
- 21.10
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.