The DOI matches its Crossref record; 80 of the 80 references it cites were found in a registry or an index.
Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment
Abstract
Abstract Binder jetting is expected to become the universal process for preparing ceramic parts because it can overcome multiple problems, such as the difficulty to prepare complex-shaped ceramic parts and the shrinkage of the sintering process, which appear in conventional ceramic preparation process. This paper introduces principles, steps, and applications of binder jetting printing ceramics. Furthermore, five key factors of binder jetting printing ceramics (powders, binders, printing parameters, equipment, and post-treatment process) have been investigated. Accordingly, effects of powders (including shape, particle size and distribution, and additives), binders (including binding method, droplet-formation mechanism, and droplet-infiltration kinetics), printing parameters (including layer thickness, saturation, solid binder, and printing orientation), equipment, and post-treatment (including de-powdering process, and densification process) on density, roughness, strength, accuracy, and resolution of ceramic parts have been discussed and summarized. This paper provides detailed analysis of techniques and mechanisms of binder jetting of ceramics, giving guidance on how to handle raw materials and select various processing parameters for achieving desired performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
ASME International Mechanical Engineering Congress and Exposition
(2001) · The Journal of the Acoustical Society of America · doi:10.1121/1.4776777 · Cited by 2,619
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Capillary effects during droplet impact on a solid surface
Pasandideh-Fard, M., Qiao, Y. M., Chandra, S., & Mostaghimi, J. (1996) · Physics of Fluids · doi:10.1063/1.868850 · Cited by 1,364
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Additive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Inzana, J. A., Olvera, D., Fuller, S. M., Kelly, J. P., Graeve, O. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.064 · Cited by 840
Rapid prototyping in tissue engineering: challenges and potential
Yeong, W.-Y., Chua, C.-K., Leong, K.-F., & Chandrasekaran, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.10.004 · Cited by 807
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
Three‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
Taboas, J. M., Maddox, R. D., Krebsbach, P. H., & Hollister, S. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00276-4 · Cited by 691
Spread and rebound of liquid droplets upon impact on flat surfaces
Mao, T., Kuhn, D. C. S., & Tran, H. N. (1997) · AIChE Journal · doi:10.1002/aic.690430903 · Cited by 690
Biodegradable Polymer Scaffolds with Well-Defined Interconnected Spherical Pore Network
Ma, P. X., & Choi, J.-W. (2001) · Tissue Engineering · doi:10.1089/107632701300003269 · Cited by 620
A three-dimensional osteochondral composite scaffold for articular cartilage repair
Sherwood, J. K., Riley, S. L., Palazzolo, R., Brown, S. C., Monkhouse, D. C., Coates, M., Griffith, L. G., Landeen, L. K., & Ratcliffe, A. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00223-5 · Cited by 610
Farahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
Numerical Calculation of the Fluid Dynamics of Drop-on-Demand Jets
Fromm, J. E. (1984) · IBM Journal of Research and Development · doi:10.1147/rd.283.0322 · Cited by 601
Vaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
Stow, C. D., & Hadfield, M. G. (1981) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1981.0002 · Cited by 530
Butscher, A., Bohner, M., Hofmann, S., Gauckler, L., & Müller, R. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.039 · Cited by 459
Cox, S. C., Thornby, J. A., Gibbons, G. J., Williams, M. A., & Mallick, K. K. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.11.024 · Cited by 452
Additive manufacturing of ceramics: A review
Deckers, J. P., Vleugels, J., & Kruth, J. (2014) · Lirias (KU Leuven) · doi:10.4416/jcst2014-00032 · Cited by 429
Fielding, G. A., Bandyopadhyay, A., & Bose, S. (2012) · Dental Materials · doi:10.1016/j.dental.2011.09.010 · Cited by 401
A review of process planning techniques in layered manufacturing
Kulkarni, P., Marsan, A., & Dutta, D. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010309859 · Cited by 390
Roohani-Esfahani, S.-I., Newman, P., & Zreiqat, H. (2016) · Scientific Reports · doi:10.1038/srep19468 · Cited by 380
Three-dimensional printing in surgery: a review of current surgical applications
Malik, H. H., Darwood, A. R. J., Shaunak, S., Kulatilake, P., El-Hilly, A. A., Mulki, O., & Baskaradas, A. (2015) · Journal of Surgical Research · doi:10.1016/j.jss.2015.06.051 · Cited by 370
Recent advances in 3D printing of porous ceramics: A review
Hwa, L. C., Rajoo, S., Noor, A. M., Ahmad, N., & Uday, M. B. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2017.08.002 · Cited by 343
Effects of layer thickness and binder saturation level parameters on 3D printing process
Vaezi, M., & Chua, C. K. (2011) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-010-2821-1 · Cited by 341
Inkjet printing - the physics of manipulating liquid jets and drops
Martin, G. D., Hoath, S. D., & Hutchings, I. M. (2008) · Journal of Physics: Conference Series · doi:10.1088/1742-6596/105/1/012001 · Cited by 325
3D printing of bone substitute implants using calcium phosphate and bioactive glasses
Bergmann, C., Lindner, M., Zhang, W., Koczur, K., Kirsten, A., Telle, R., & Fischer, H. (2010) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.04.037 · Cited by 311
Recent developments in 3D printable composite materials
Kalsoom, U., Nesterenko, P. N., & Paull, B. (2016) · RSC Advances · doi:10.1039/c6ra11334f · Cited by 294
Ink Jet Deposition of Ceramic Suspensions: Modeling and Experiments of Droplet Formation
Reis, N., & Derby, B. (2000) · MRS Proceedings · doi:10.1557/proc-625-117 · Cited by 289
Farzadi, A., Solati-Hashjin, M., Asadi-Eydivand, M., & Abu Osman, N. A. (2014) · PLoS ONE · doi:10.1371/journal.pone.0108252 · Cited by 284
Gonzalez, J. A., Mireles, J., Lin, Y., & Wicker, R. B. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.03.079 · Cited by 265
Roy, T. D., Simon, J. L., Ricci, J. L., Rekow, E. D., Thompson, V. P., & Parsons, J. R. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10582 · Cited by 262
Nandwana, P., Elliott, A. M., Siddel, D., Merriman, A., Peter, W. H., & Babu, S. S. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2016.12.002 · Cited by 249
3D printing for rapid sand casting—A review
Upadhyay, M., Sivarupan, T., & El Mansori, M. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2017.07.017 · Cited by 244
Zhou, Z., Buchanan, F., Mitchell, C., & Dunne, N. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.027 · Cited by 241
Additive Manufacture of Ceramics Components by Inkjet Printing
Derby, B. (2015) · Engineering · doi:10.15302/j-eng-2015014 · Cited by 239
Mondrinos, M. J., Dembzynski, R., Lu, L., Byrapogu, V. K. C., Wootton, D. M., Lelkes, P. I., & Zhou, J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.03.049 · Cited by 225
Butscher, A., Bohner, M., Roth, C., Ernstberger, A., Heuberger, R., Doebelin, N., Rudolf von Rohr, P., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.027 · Cited by 224
Applications of additive manufacturing in dentistry: A review
Bhargav, A., Sanjairaj, V., Rosa, V., Feng, L. W., & Fuh YH, J. (2018) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33961 · Cited by 223
Gonçalves, E. M., Oliveira, F. J., Silva, R. F., Neto, M. A., Fernandes, M. H., Amaral, M., Vallet‐Regí, M., & Vila, M. (2016) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33432 · Cited by 221
Fabrication of barium titanate by binder jetting additive manufacturing technology
Gaytan, S. M., Cadena, M. A., Karim, H., Delfin, D., Lin, Y., Espalin, D., MacDonald, E., & Wicker, R. B. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.01.108 · Cited by 221
Zhang, H., Mao, X., Du, Z., Jiang, W., Han, X., Zhao, D., Han, D., & Li, Q. (2016) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2016.1145532 · Cited by 208
The morphology of anisotropic 3D-printed hydroxyapatite scaffolds
Fierz, F. C., Beckmann, F., Huser, M., Irsen, S. H., Leukers, B., Witte, F., Degistirici, Ö., Andronache, A., Thie, M., & Müller, B. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.06.012 · Cited by 203
Powder bed binder jet printed alloy 625: Densification, microstructure and mechanical properties
Mostafaei, A., Stevens, E. L., Hughes, E. T., Biery, S. D., Hilla, C., & Chmielus, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.06.067 · Cited by 192
Curodeau, A., Sachs, E., & Caldarise, S. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200009)53:5<525::aid-jbm12>3.0.co;2-1 · Cited by 173
Mostafaei, A., Toman, J., Stevens, E. L., Hughes, E. T., Krimer, Y. L., & Chmielus, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.11.021 · Cited by 169
Asadi-Eydivand, M., Solati-Hashjin, M., Farzad, A., & Abu Osman, N. A. (2016) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.06.005 · Cited by 161
A synthetic bone implant macroscopically identical to cancellous bone
Tancred, D. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00141-0 · Cited by 161
Additive manufacturing of metallic cellular materials via three-dimensional printing
Williams, C. B., Cochran, J. K., & Rosen, D. W. (2010) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-010-2812-2 · Cited by 152
Suwanprateeb, J., Sanngam, R., Suvannapruk, W., & Panyathanmaporn, T. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3697-1 · Cited by 139
Lin, H., Kuo, C., Yang, C.-W., Shaw, S., & Wu, Y. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10183 · Cited by 134
Ma, Z., Gao, C., Gong, Y., & Shen, J. (2003) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.10049 · Cited by 126
Ink-jet printing of polymer light-emitting devices
Duineveld, P. C., de Kok, M. M., Buechel, M., Sempel, A., Mutsaers, K. A. H., van de Weijer, P., Camps, I. G. J., van den Biggelaar, T. J. M., Rubingh, J. E. J. M., & Haskal, E. I. (2002) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.457460 · Cited by 124
3D Printed Organ Models for Surgical Applications
Qiu, K., Haghiashtiani, G., & McAlpine, M. C. (2018) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-061417-125935 · Cited by 123
Shanjani, Y., Croos, J. N. A. D., Pilliar, R. M., et al. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31610 · Cited by 121
Effect of particle size gradation on the performance of glass-ceramic 3D printing process
Sun, C., Tian, X., Wang, L., Liu, Y., Wirth, C. M., Günster, J., Li, D., & Jin, Z. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.09.197 · Cited by 120
Self-citationKlammert, U., Reuther, T., Jahn, C., et al. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.08.019 · Cited by 118
Chumnanklang, R., Panyathanmaporn, T., Sitthiseripratip, K., & Suwanprateeb, J. (2007) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.11.004 · Cited by 114
Fabrication of computationally designed scaffolds by low temperature 3D printing
Castilho, M. D., Dias, M., Gbureck, U., Gröll, J., Fernandes, P. R., Pires, I., Gouveia, B., Rodrigues, J. M. C., & Vorndran, E. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035012 · Cited by 113
Slurry‐Based Additive Manufacturing of Ceramics
Mühler, T., Gomes, C. M., Heinrich, J. G., & Günster, J. (2013) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12113 · Cited by 104
Binder jetting of a complex-shaped metal partial denture framework
Mostafaei, A., Stevens, E. L., Ference, J. J., Schmidt, D. E., & Chmielus, M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.02.014 · Cited by 103
Sintering of 3 D ‐Printed Glass/ HA p Composites
Winkel, A., Meszaros, R., Reinsch, S., Müller, R., Travitzky, N. A., Fey, T., Greil, P., & Wondraczek, L. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2012.05368.x · Cited by 76
Kumar, A., Nune, K. C., & Misra, R. D. K. (2016) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35664 · Cited by 76
LAS glass–ceramic scaffolds by three-dimensional printing
Zocca, A., Gomes, C. M., Bernardo, E., Müller, R., Günster, J., & Colombo, P. (2013) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2012.12.012 · Cited by 73
Development Process for Custom Three-Dimensional Printing (3DP) Material Systems
Utela, B. R., Storti, D., Anderson, R., & Ganter, M. A. (2010) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4000713 · Cited by 71
Binder Jetting Additive Manufacturing of Ceramics: A Literature Review
Du, W., Ren, X., Ma, C., & Pei, Z. (2017) · Volume 14: Emerging Technologies; Materials: Genetics to Structures; Safety Engineering and Risk Analysis · doi:10.1115/imece2017-70344 · Cited by 67
3D printing of porcelain by layerwise slurry deposition
Lima, P., Zocca, A., Acchar, W., & Günster, J. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.03.014 · Cited by 64
Strengthening of ferrous binder jet 3D printed components through bronze infiltration
Cordero, Z. C., Siddel, D., Peter, W. H., & Elliott, A. M. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.03.011 · Cited by 58
Validation of surface coating with nanoparticles to improve the flowability of fine cohesive powders
Zhu, X., Zhang, Q., Huang, C., et al. (2016) · Particuology · doi:10.1016/j.partic.2016.09.001 · Cited by 41
Additive/Subtractive Manufacturing Research and Development in Europe
Beaman, J. J., Atwood, C. L., Bergman, T. L., Bourell, D. L., Hollister, S. J., & Rosen, D. W. (2004) · Defense Technical Information Center (DTIC) · doi:10.21236/ada466756 · Cited by 37
Charbonnier, B., Laurent, C., & Marchat, D. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.06.005 · Cited by 30
Wang, Y., Li, X., Li, C.-C., Yang, M., & Wei, Q. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9050-9 · Cited by 24
Suwanprateeb, J., Thammarakcharoen, F., & Hobang, N. (2016) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-016-5784-4 · Cited by 20
Granulation of Nano Alumina Powder for Improved Flowability by Spray Drying
Sathish, S., Manivasagam, G., Udayakumar, A., et al. (2012) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-012-0158-1 · Cited by 12
Preparation and flowability characterization of ceramic powders for Selective Laser Melting
Mapar, M., Zhang, D., Liu, Z., Yeong, W. Y., Chua, C. K., Tay, B. Y., Geramifard, O., Maleksaeedi, S., & Wiria, F. E. (2013) · CRC Press eBooks · doi:10.1201/b15961-50 · Cited by 12
Kolan, K. C. R., Leu, M.-C., Hilmas, G. E., & Veléz, M. H. (2011) · Texas Digital Library (University of Texas) · doi:10.26153/tsw/15314 · Cited by 4
Cited by
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
Mostafaei, A., Elliott, A. M., Barnes, J. E., Li, F., Tan, W., Cramer, C. L., Nandwana, P., & Chmielus, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100707 · Cited by 1,093
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Self-citationAdditive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 450
A Review on Binder Jet Additive Manufacturing of 316L Stainless Steel
Mirzababaei, S., & Pasebani, S. (2019) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp3030082 · Cited by 290
Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications
Zhou, X., Ren, L., Song, Z., Li, G., Zhang, J., Li, B., Wu, Q., Li, W., Ren, L., & Liu, Q. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2023.110585 · Cited by 277
Metadata
- Authors
- Lv, X., Ye, F., Cheng, L., Fan, S., & Liu, Y.
- Venue
- Ceramics International
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 45
- Issue
- 10
- Pages
- 12609-12624
- ISSN
- 0272-8842 (ISSN-L)
- OpenAlex
- W2933824395
- Cited by
- 302
- References
- 80
- FWCI
- 12.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.