The DOI matches its Crossref record; 197 of the 197 references it cites were found in a registry or an index.
Materials for additive manufacturing
Abstract
Abstract Critical to the selection requirements for additive manufacturing (AM) is the need for appropriate materials. Materials requirements for AM include the ability to produce the feedstock in a form amenable to the specific AM process, suitable processing of the material by AM, capability to be acceptably post-processed to enhance geometry and properties, and manifestation of necessary performance characteristics in service. As AM has matured, specific classes of material have become associated with specific AM processes and applications. This paper gathers this information for each of the seven categories of ISO/ASTM AM categories. Polymers, metals, ceramics and composites are considered. Microstructural features affecting AM part properties are listed. Service properties of AM parts are described, including physical, mechanical, optical and electrical properties. An additive manufacturability index is proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Statistical Distribution Function of Wide Applicability
Weibull, W. (1951) · Journal of Applied Mechanics · doi:10.1115/1.4010337 · Cited by 11,604
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Self-citationAdditive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
The Deformation and Ageing of Mild Steel: III Discussion of Results
Hall, E. O. (1951) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/64/9/303 · Cited by 7,872
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
The Cleavage Strength of Polycrystals
Petch, N. J. (1953) · Medical Entomology and Zoology · Cited by 3,641
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Self-citationLaser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Self-citationA study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Self-citationA Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Self-citationThijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.052 · Cited by 1,917
Self-citationVrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Self-citationInkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Recommended Values of Thermophysical Properties for Selected Commercial Alloys
Mills, K. C. (2002) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845690144 · Cited by 1,722
Donachie, M. J. (1988) · Cited by 1,662
Ding, D., Pan, Z., Cuiuri, D., & Li, H. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7077-3 · Cited by 1,648
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
Self-citationCarroll, B. E., Palmer, T. A., & Beese, A. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.054 · Cited by 1,507
Self-citationLeuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Self-citationBinding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Self-citationProgress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Self-citationA review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
Amato, K. N., Gaytan, S. M., Murr, L. E., Martinez, E., Shindo, P. W., Hernandez, J., Collins, S., & Medina, F. (2012) · Acta Materialia · doi:10.1016/j.actamat.2011.12.032 · Cited by 1,166
Superalloys: A Technical Guide
Donachie, M. J., & Donachie, S. J. (2002) · Cited by 1,160
Brandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
Levy, G. N., Schindel, R., & Kruth, J. P. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60206-6 · Cited by 1,121
Self-citationAdditive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca, A., Colombo, P., Gomes, C. M., & Günster, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13700 · Cited by 1,115
Interpenetrating Polymer Networks and Related Materials
Sperling, L. H. (1981) · Springer eBooks · doi:10.1007/978-1-4684-3830-7 · Cited by 1,110
Additive manufacturing of multi-material structures
Bandyopadhyay, A., & Heer, B. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.04.001 · Cited by 1,029
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Self-citationProcessing techniques for functionally graded materials
Kieback, B., Neubrand, A., & Riedel, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00578-1 · Cited by 979
Selective laser melting of aluminium components
Louvis, E., Fox, P., & Sutcliffe, C. J. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.019 · Cited by 933
Additive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Surface roughness analysis, modelling and prediction in selective laser melting
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.11.011 · Cited by 876
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Al-Bermani, S. S., Blackmore, M., Zhang, W., & Todd, I. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-010-0397-x · Cited by 860
Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting
Kempen, K., Thijs, L., Van Humbeeck, J., & Kruth, J.-P. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.059 · Cited by 849
Self-citationThe Elastic Constants of a Solid containing Spherical Holes
Mackenzie, J. K. (1950) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/63/1/302 · Cited by 841
Wang, Z., Palmer, T. A., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.019 · Cited by 830
Self-citationDirect Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
Freeform fabrication of ceramics via stereolithography
Griffith, M. L., & Halloran, J. W. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb09022.x · Cited by 815
Antonysamy, A. A., Meyer, J., & Prangnell, P. B. (2013) · Materials Characterization · doi:10.1016/j.matchar.2013.07.012 · Cited by 747
Balling behavior of stainless steel and nickel powder during selective laser melting process
Li, R., Liu, J., Shi, Y., Wang, L., & Jiang, W. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3566-1 · Cited by 722
Ashby, M. F., & Brechet, Y. J. M. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00441-5 · Cited by 701
(2013) · Medical Entomology and Zoology · Cited by 690
Thijs, L., Montero Sistiaga, M. L., Wauthle, R., Xie, Q., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.036 · Cited by 672
Self-citationHigh Power Selective Laser Melting (HP SLM) of Aluminum Parts
Buchbinder, D., Schleifenbaum, H., Heidrich, S., Meiners, W., & Bültmann, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.035 · Cited by 666
Material Incress Manufacturing by Rapid Prototyping Techniques
Kruth, J. P. (1991) · CIRP Annals · doi:10.1016/s0007-8506(07)61136-6 · Cited by 657
Self-citationCarroll, B. E., Otis, R., Borgonia, J. P., Suh, J.-O., Dillon, R. P., Shapiro, A. A., Hofmann, D. C., Liu, Z., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.019 · Cited by 657
Self-citationTan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S., & Cha, S. W. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00131-5 · Cited by 625
Tammas-Williams, S., Zhao, H., Léonard, F., Derguti, F., Todd, I., & Prangnell, P. B. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.02.008 · Cited by 590
Changing the alloy composition of Al7075 for better processability by selective laser melting
Montero-Sistiaga, M. L., Mertens, R., Vrancken, B., Wang, X., Hooreweder, B. V., Kruth, J., & Humbeeck, J. V. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.08.003 · Cited by 590
Self-citationFormation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
Weingarten, C., Buchbinder, D., Pirch, N., Meiners, W., Wissenbach, K., & Poprawe, R. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.013 · Cited by 585
Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth
Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571
Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steel
Kempen, K., Yasa, E., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.033 · Cited by 566
Self-citationMicrostructural and texture development in direct laser fabricated IN718
Parimi, L. L., Ravi, G. A., Clark, D., & Attallah, M. M. (2014) · Materials Characterization · doi:10.1016/j.matchar.2013.12.012 · Cited by 565
Murr, L. E., Esquivel, E. V., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Martinez, E. Y., Medina, F., Hernandez, D. H., Martinez, E., Martinez, J. L., et al. (2009) · Materials Characterization · doi:10.1016/j.matchar.2008.07.006 · Cited by 564
Dehoff, R. R., Kirka, M. M., Sames, W. J., Bilheux, H., Tremsin, A. S., Lowe, L. E., & Babu, S. S. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000734 · Cited by 555
Vaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
A review of process development steps for new material systems in three dimensional printing (3DP)
Utela, B., Storti, D., Anderson, R., & Ganter, M. (2008) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2009.03.002 · Cited by 548
Microstructure Characteristics of Inconel 625 Superalloy Manufactured by Selective Laser Melting
Li, S., Wei, Q., Shi, Y., Zhu, Z., & Zhang, D. (2015) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2014.09.020 · Cited by 526
Kunze, K., Etter, T., Grässlin, J., & Shklover, V. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.10.003 · Cited by 515
Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
Facchini, L., Magalini, E., Robotti, P., Molinari, A., Höges, S., & Wissenbach, K. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011083371 · Cited by 512
Highly Anisotropic Steel Processed by Selective Laser Melting
Niendorf, T., Leuders, S., Riemer, A., Richard, H. A., Tröster, T., & Schwarze, D. (2013) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-013-9875-z · Cited by 506
Characterization of stainless steel parts by Laser Metal Deposition Shaping
Zhang, K., Wang, S., Liu, W., & Shang, X. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.09.006 · Cited by 485
Hollander, D. A., von Walter, M., Wirtz, T., Sellei, R., Schmidt-Rohlfing, B., Paar, O., & Erli, H.-J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.041 · Cited by 482
Additive Manufacturing of Dense Alumina Ceramics
Schwentenwein, M., & Homa, J. (2015) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12319 · Cited by 465
Composites by rapid prototyping technology
Kumar, S., & Kruth, J.-P. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.07.045 · Cited by 463
Self-citationElectron Beam Additive Manufacturing of Titanium Components: Properties and Performance
Edwards, P., O'Conner, A., & Ramulu, M. (2013) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4025773 · Cited by 450
Microstructure and texture evolution during solidification processing of Ti–6Al–4V
Kobryn, P. A., & Semiatin, S. L. (2003) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(02)00865-8 · Cited by 433
Additive manufacturing of ceramics: A review
Deckers, J. P., Vleugels, J., & Kruth, J. (2014) · Lirias (KU Leuven) · doi:10.4416/jcst2014-00032 · Cited by 429
Self-citationMicrostructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
Murr, L. E., Martinez, E., Hernandez, J., Collins, S., Amato, K. N., Gaytan, S. M., & Shindo, P. W. (2012) · Journal of Materials Research and Technology · doi:10.1016/s2238-7854(12)70029-7 · Cited by 425
Kelly, S. M., & Kampe, S. L. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-004-0094-8 · Cited by 423
Casalino, G., Campanelli, S. L., Contuzzi, N., & Ludovico, A. D. (2015) · Optics & Laser Technology · doi:10.1016/j.optlastec.2014.07.021 · Cited by 412
Processing AlSi10Mg by selective laser melting: Parameter optimisation and material characterisation
Kempen, K., Thijs, L., Van Humbeeck, J., & Kruth, J.-P. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000702 · Cited by 410
Self-citationWiria, F. E., Leong, K. F., Chua, C. K., & Liu, Y. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.07.008 · Cited by 405
Fielding, G. A., Bandyopadhyay, A., & Bose, S. (2012) · Dental Materials · doi:10.1016/j.dental.2011.09.010 · Cited by 401
Postiglione, G., Natale, G., Griffini, G., Levi, M., & Turri, S. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.05.014 · Cited by 399
Additive manufacturing of ZrO2‐Al2O3 ceramic components by selective laser melting
Wilkes, J., Hagedorn, Y., Meiners, W., & Wissenbach, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311292736 · Cited by 398
Improvement of surface finish by staircase machining in fused deposition modeling
Pandey, P. M., Venkata Reddy, N., & Dhande, S. G. (2003) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(02)00953-6 · Cited by 395
On the Texture Formation of Selective Laser Melted Ti-6Al-4V
Simonelli, M., Tse, Y. Y., & Tuck, C. J. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2218-0 · Cited by 391
The manufacturing of hard tools from metallic powders by selective laser melting
Abe, F., Osakada, K., Shiomi, M., Uematsu, K., & Matsumoto, M. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00522-2 · Cited by 390
Buchbinder, D., Meiners, W., Pirch, N., Wissenbach, K., & Schrage, J. (2014) · Journal of Laser Applications · doi:10.2351/1.4828755 · Cited by 390
Campbell, I., Diegel, O., Kowen, J., & Wohlers, T. T. (2018) · ResearchSpace (University of Auckland) · Cited by 377
Perspectives on Additive Manufacturing
Bourell, D. L. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031606 · Cited by 362
Self-citationHrabe, N. W., & Quinn, T. P. (2013) · Materials Science and Engineering A · doi:10.1016/j.msea.2013.02.065 · Cited by 349
Brandl, E., Baufeld, B., Leyens, C., & Gault, R. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.087 · Cited by 348
Beese, A. M., & Carroll, B. E. (2015) · JOM · doi:10.1007/s11837-015-1759-z · Cited by 343
Self-citationCarter, L. N., Attallah, M. M., & Reed, R. C. (2012) · Wiley eBooks · doi:10.1002/9781118516430.ch64 · Cited by 342
A model research for prototype warp deformation in the FDM process
Wang, T.-M., Xi, J.-T., & Jin, Y. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0556-9 · Cited by 331
Biomedical production of implants by additive electro-chemical and physical processes
Bartolo, P., Kruth, J.-P., Silva, J., Levy, G., Malshe, A., Rajurkar, K., Mitsuishi, M., Ciurana, J., & Leu, M. (2012) · CIRP Annals · doi:10.1016/j.cirp.2012.05.005 · Cited by 321
Self-citationKanagarajah, P., Brenne, F., Niendorf, T., & Maier, H. J. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.09.025 · Cited by 318
Maskery, I., Aboulkhair, N. T., Corfield, M. R., Tuck, C., Clare, A. T., Leach, R. K., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2016) · Materials Characterization · doi:10.1016/j.matchar.2015.12.001 · Cited by 317
Self-citationOn the fatigue properties of metals manufactured by selective laser melting – The role of ductility
Leuders, S., Lieneke, T., Lammers, S., Tröster, T., & Niendorf, T. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.157 · Cited by 309
Selective Laser Melting of Crack-Free High Density M2 High Speed Steel Parts by Baseplate Preheating
Kempen, K., Vrancken, B., Buls, S., Thijs, L., Van Humbeeck, J., & Kruth, J.-P. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028513 · Cited by 308
Self-citationKing, W., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., & Khairallah, S. A. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000728 · Cited by 308
A pragmatic model for selective laser melting with evaporation
Verhaeghe, F., Craeghs, T., Heulens, J., & Pandelaers, L. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.08.027 · Cited by 308
Balling processes during selective laser treatment of powders
Tolochko, N. K., Mozzharov, S. E., Yadroitsev, I. A., Laoui, T., Froyen, L., Titov, V. I., & Ignatiev, M. B. (2004) · Rapid Prototyping Journal · doi:10.1108/13552540410526953 · Cited by 299
Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition
Dinda, G. P., Song, L., & Mazumder, J. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9634-y · Cited by 288
Pfister, A., Landers, R., Laib, A., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10807 · Cited by 284
Tensile Properties and Microstructures of Laser-Formed Ti-6Al-4V
Alcisto, J., Enriquez, A., Garcia, H., Hinkson, S., Steelman, T., Silverman, E. M., Valdovino, P., Gigerenzer, H., Foyos, J., Ogren, J. R., et al. (2010) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-010-9670-9 · Cited by 284
Koike, M., Greer, P., Owen, K., Guo, L., Murr, L. E., Gaytan, S. M., Martinez, E., & Okabe, T. H. (2011) · Materials · doi:10.3390/ma4101776 · Cited by 270
Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4V
Denlinger, E. R., Heigel, J. C., & Michaleris, P. (2015) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405414539494 · Cited by 263
A novel approach to improve mechanical properties of parts fabricated by fused deposition modeling
Wang, J., Xie, H., Weng, Z., Senthil, T., & Wu, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.078 · Cited by 259
Materials perspective of polymers for additive manufacturing with selective laser sintering
Schmid, M., Amado, A., & Wegener, K. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.138 · Cited by 256
Residual stresses in LENS® components using neutron diffraction and contour method
Rangaswamy, P., Griffith, M. L., Prime, M. B., Holden, T. M., Rogge, R. B., Edwards, J. M., & Sebring, R. J. (2005) · Materials Science and Engineering A · doi:10.1016/j.msea.2005.02.019 · Cited by 256
Compositionally graded metals: A new frontier of additive manufacturing
Hofmann, D. C., Kolodziejska, J., Roberts, S., Otis, R., Dillon, R. P., Suh, J.-O., Liu, Z.-K., & Borgonia, J.-P. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.208 · Cited by 255
Hrabe, N., & Quinn, T. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.02.064 · Cited by 252
Chung, H., & Das, S. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.07.112 · Cited by 245
Rickenbacher, L., Etter, T., Hövel, S., & Wegener, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311323281 · Cited by 239
Processing of a Polyamide-12/carbon nanofibre composite by laser sintering
Goodridge, R. D., Shofner, M. L., Hague, R. J. M., McClelland, M., Schlea, M. R., Johnson, R. B., & Tuck, C. J. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2010.10.011 · Cited by 234
Laser processing of SiC-particle-reinforced coating on titanium
Das, M., Balla, V. K., Basu, D., Bose, S., & Bandyopadhyay, A. (2010) · Scripta Materialia · doi:10.1016/j.scriptamat.2010.04.044 · Cited by 233
Microwave dielectric characterisation of 3D-printed BaTiO3/ABS polymer composites
Castles, F., Isakov, D., Lui, A., Lei, Q., Dancer, C. E. J., Wang, Y., Janurudin, J. M., Speller, S. C., Grovenor, C. R. M., & Grant, P. S. (2016) · Scientific Reports · doi:10.1038/srep22714 · Cited by 231
3D stereolithography printing of graphene oxide reinforced complex architectures
Lin, D., Jin, S., Zhang, F., Wang, C., Wang, Y., Zhou, C., & Cheng, G. J. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/43/434003 · Cited by 228
Griffith, M. L., Ensz, M. T., Puskar, J. D., Robino, C. V., Brooks, J. A., Philliber, J. A., Smugeresky, J. E., & Hofmeister, W. H. (2000) · MRS Proceedings · doi:10.1557/proc-625-9 · Cited by 225
Processing of Bulk Alumina Ceramics Using Laser Engineered Net Shaping
Balla, V. K., Bose, S., & Bandyopadhyay, A. (2008) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2008.02202.x · Cited by 217
Ramirez, D. A., Murr, L. E., Martinez, E., Hernandez, D. H., Martinez, J. L., Machado, B. I., Medina, F., Frigola, P., & Wicker, R. B. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.03.033 · Cited by 217
High Cycle Fatigue (HCF) Performance of Ti-6Al-4V Alloy Processed by Selective Laser Melting
Wycisk, E., Emmelmann, C., Siddique, S., & Walther, F. (2013) · Advanced Materials Research · doi:10.4028/www.scientific.net/amr.816-817.134 · Cited by 215
Texture and anisotropy in selective laser melting of NiTi alloy
Dadbakhsh, S., Vrancken, B., Kruth, J.-P., Luyten, J., & Van Humbeeck, J. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.032 · Cited by 211
Self-citationPhotopolymerization of powder suspensions for shaping ceramics
Halloran, J. W., Tomeckova, V., Gentry, S., Das, S., Cilino, P., Yuan, D., Guo, R., Rudraraju, A., Shao, P., Wu, T., et al. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.12.003 · Cited by 205
Yu, L., Shen, H., & Xu, Z. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29886 · Cited by 203
A model research for prototype warp deformation in the FDM process
Wang, T.-M., Xi, J.-T., & Jin, Y. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0878-7 · Cited by 199
Material Properties of Ti6Al4V Parts Produced by Laser Metal Deposition
Yu, J., Rombouts, M., Maes, G., & Motmans, F. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.056 · Cited by 193
A Review of Robocasting Technology
Cesarano, J. (1998) · MRS Proceedings · doi:10.1557/proc-542-133 · Cited by 193
Stereolithography and other RP&M technologies
Jacobs, P. F. (1996) · Cited by 188
Athreya, S. R., Kalaitzidou, K., & Das, S. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.12.028 · Cited by 175
Vora, P., Mumtaz, K., Todd, I., & Hopkinson, N. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.06.003 · Cited by 173
Multi-material, multi-technology FDM: exploring build process variations
Espalin, D., Alberto Ramirez, J., Medina, F., & Wicker, R. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2012-0112 · Cited by 171
Ma, M., Wang, Z., Wang, D., & Zeng, X. (2012) · Optics & Laser Technology · doi:10.1016/j.optlastec.2012.07.002 · Cited by 169
Radiation Chemistry of Monomers, Polymers, and Plastics
Wilson, J. E., & Burton, M. (1974) · Physics Today · doi:10.1063/1.3128702 · Cited by 168
Yu, J., Rombouts, M., & Maes, G. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.08.078 · Cited by 165
(2016) · CRC Press eBooks · doi:10.1201/b13044 · Cited by 159
The influence of heat accumulation on the surface roughness in powder-bed additive manufacturing
Jamshidinia, M., & Kovacevic, R. (2015) · Surface Topography: Metrology and Properties · doi:10.1088/2051-672x/3/1/014003 · Cited by 159
Use of ultrasonic consolidation for fabrication of multi‐material structures
Janaki Ram, G. D., Robinson, C., Yang, Y., & Stucker, B. E. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776179 · Cited by 158
Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing
Rocha, C. R., Perez, A. R. T., Roberson, D. A., Shemelya, C. M., MacDonald, E. W., & Wicker, R. B. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.158 · Cited by 157
Stereolithography for the fabrication of ceramic three‐ dimensional parts
Hinczewski, C., Corbel, S., & Chartier, T. (1998) · Rapid Prototyping Journal · doi:10.1108/13552549810222867 · Cited by 143
Suwanprateeb, J., Sanngam, R., Suvannapruk, W., & Panyathanmaporn, T. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3697-1 · Cited by 139
Study of shrinkage strains in a stereolithography cured acrylic photopolymer resin
Karalekas, D., & Aggelopoulos, A. (2003) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(03)00028-1 · Cited by 132
Layer manufacturing of magnesium and its alloy structures for future applications
Ng, C. C., Savalani, M. M., Man, H. C., & Gibson, I. (2010) · Virtual and Physical Prototyping · doi:10.1080/17452751003718629 · Cited by 131
Oxide films in laser additive manufactured Inconel 718
Zhang, Y. N., Cao, X. J., Wanjara, P., & Medraj, M. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.07.039 · Cited by 130
Zheng, H., Zhang, J., Lu, S., Gaochao, W., & Xu, Z. (2005) · Materials Letters · doi:10.1016/j.matlet.2005.11.003 · Cited by 129
Wei, Q., Li, S., Han, C., Li, W., Cheng, L., Hao, L., & Shi, Y. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.010 · Cited by 128
Free Form Fabrication of Metallic Components Using Laser Engineered Net Shaping (Lens)
Greene, D. L. (2018) · Texas ScholarWorks (Texas Digital Library) · doi:10.15781/t26689430 · Cited by 122
Effect of Porosity on the Stiffness of Cast Steel
Hardin, R. A., & Beckermann, C. (2007) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-007-9390-4 · Cited by 109
Microporosity effects on cyclic plasticity and fatigue of LENS™-processed steel
Xue, Y., Pascu, A. M., Horstemeyer, M. F., Wang, L., & Wang, P. T. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.03.014 · Cited by 104
Elomaa, L., Kokkari, A. K., Närhi, T. O., & Seppälä, J. V. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.10.014 · Cited by 104
Interpenetrating polymer networks and related materials
Robeson, L. (1982) · Colloids and Surfaces · doi:10.1016/0166-6622(82)80012-7 · Cited by 101
The production of copper parts using DMLR
Pogson, S. R., Fox, P., Sutcliffe, C. J., & O’Neill, W. (2003) · Rapid Prototyping Journal · doi:10.1108/13552540310502239 · Cited by 99
de Hazan, Y., Heinecke, J., Weber, A. P., et al. (2009) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.05.012 · Cited by 96
Acharya, R., & Das, S. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2912-6 · Cited by 93
Comparison of AlSi10Mg and Al 6061 Processed through DMLS
Fulcher, B. A., Leigh, D. K., & Watt, T. J. (2014) · doi:10.26153/tsw/15695 · Cited by 92
Du, Y., Liu, H., Jiaqi, S., Wang, J., Ma, J., & Zhang, S. (2015) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2015.06.074 · Cited by 89
Abioye, T. E., Farayibi, P. K., McCartney, D. G., et al. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.12.023 · Cited by 87
Effect of Melt Scan Rate on Microstructure and Macrostructure for Electron Beam Melting of Ti-6Al-4V
Puebla, K., Murr, L. E., Gaytan, S. M., Martinez, E., Medina, F. R., & Wicker, R. B. (2012) · Materials Sciences and Applications · doi:10.4236/msa.2012.35038 · Cited by 85
Modeling effects of oxygen inhibition in mask‐based stereolithography
Jariwala, A., Ding, F., Boddapati, A., et al. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111124734 · Cited by 84
Aqueous‐based freeze‐form extrusion fabrication of alumina components
Huang, T., Mason, M. S., Zhao, X., Hilmas, G. E., & Leu, M. C. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910943388 · Cited by 81
Self-citationde Obaldia, E. E., Jeong, C., Grunenfelder, L. K., Kisailus, D., & Zavattieri, P. D. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.03.026 · Cited by 76
Fast Prediction and Validation of Part Distortion in Selective Laser Melting
Li, C., Fu, C. H., Guo, Y. B., & Fang, F. (2015) · Procedia Manufacturing · doi:10.1016/j.promfg.2015.09.042 · Cited by 76
High Cycle Fatigue of Laser Beam Deposited Ti-6Al-4V and Inconel 718
Amsterdam, E., & Kool, G. A. (2009) · Springer eBooks · doi:10.1007/978-90-481-2746-7_71 · Cited by 75
Direct laser sintered WC-10Co/Cu nanocomposites
Gu, D., & Shen, Y. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.12.028 · Cited by 75
Development Process for Custom Three-Dimensional Printing (3DP) Material Systems
Utela, B. R., Storti, D., Anderson, R., & Ganter, M. A. (2010) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4000713 · Cited by 71
Binder Jetting Additive Manufacturing of Ceramics: A Literature Review
Du, W., Ren, X., Ma, C., & Pei, Z. (2017) · Volume 14: Emerging Technologies; Materials: Genetics to Structures; Safety Engineering and Risk Analysis · doi:10.1115/imece2017-70344 · Cited by 67
Yang, Y., Ram, G. D. J., & Stucker, B. E. (2007) · Journal of Engineering Materials and Technology · doi:10.1115/1.2744431 · Cited by 66
Gill, T., & Hon, K. K. B. (2004) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/0954405042323487 · Cited by 65
Development of translucent FDM parts by post‐processing
Ahn, S., Lee, C. S., & Jeong, W.-B. (2004) · Rapid Prototyping Journal · doi:10.1108/13552540410551333 · Cited by 63
Selective laser sintering of Mo-CuNi composite to be used as EDM electrode
Amorim, F. L., Lohrengel, A., Neubert, V., Higa, C. F., & Czelusniak, T. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2012-0035 · Cited by 59
Controlling Phase Composition in Selective Laser Melted Stainless Steels
Starr, T. L., Rafi, K., Stucker, B. E., & Scherzer, C. M. (2012) · doi:10.26153/tsw/15363 · Cited by 58
Selective laser melting (SLM) of gold (Au)
Khan, M., & Dickens, P. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211193520 · Cited by 53
A Study of the Effect of Porosity Content on the Ductility of Sintered Metals
Haynes, R. (1977) · Powder Metallurgy · doi:10.1179/pom.1977.20.1.17 · Cited by 53
Graphite-based indirect laser sintered fuel cell bipolar plates containing carbon fiber additions
Bourell, D. L., Leu, M. C., Chakravarthy, K. M., Guo, N., & Alayavalli, K. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.03.105 · Cited by 52
Self-citationKhorasani, A. M., Gibson, I., Goldberg, M., & Littlefair, G. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0159 · Cited by 46
Li, J., Monaghan, T., Masurtschak, S., Bournias-Varotsis, A., Friel, R. J., & Harris, R. A. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.05.019 · Cited by 45
Laminated object manufacturing of LZSA glass‐ceramics
Gomes, C. M., Travitzky, N. A., Greil, P., Acchar, W., Birol, H., de Oliveira, A. P. N., & Hotza, D. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111184152 · Cited by 43
Zheng, B., Smugeresky, J. E., Zhou, Y., Baker, D. M., & Lavernia, E. J. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9498-1 · Cited by 41
High Speed Sintering - Early Research into a New Rapid Manufacturing Process
Hopkinson, N., & Erasenthiran, P. (2004) · doi:10.26153/tsw/6998 · Cited by 40
A comprehensive study on surface quality in 5-axis milling of SLM Ti-6Al-4V spherical components
Khorasani, A. M., Gibson, I., Goldberg, M., & Littlefair, G. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1048-9 · Cited by 38
Idaszek, J., Bruinink, A., & Święszkowski, W. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35377 · Cited by 37
SLM of Net-Shaped High Strength Ceramics: New Opportunities for Producing Dental Restorations
Hagedorn, Y., Balachandran, N., Meiners, W., Wissenbach, K., & Poprawe, R. (2011) · Publikationsdatenbank der Fraunhofer-Gesellschaft (Fraunhofer-Gesellschaft) · doi:10.26153/tsw/15315 · Cited by 36
Alayavalli, K., & Bourell, D. L. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011049289 · Cited by 34
Self-citationOxygen‐Inhibition Lithography for the Fabrication of Multipolymeric Structures
Vitale, A., Quaglio, M., Chiodoni, A. M., Bejtka, K., Cocuzza, M., Pirri, C. F., & Bongiovanni, R. M. (2015) · Advanced Materials · doi:10.1002/adma.201501737 · Cited by 34
Recent Developments in Robocasting of Ceramics and Multimaterial Deposition
Cesarano, J., King, B. H., & Denham, H. B. (1998) · doi:10.26153/tsw/666 · Cited by 31
Flowability of powders for selective laser sintering (SLS) investigated by round robin test
Schmid, M., Amado, F., Levy, G. N., & Wegener, K. (2014) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-a-010057806 · Cited by 31
Self-citationSelective laser gelation of ceramic–matrix composites
Liu, F.-H., Shen, Y., & Liao, Y. (2010) · Composites Part B Engineering · doi:10.1016/j.compositesb.2010.09.011 · Cited by 30
Fatigue Behavior of Selective Laser Melted 17-4 PH Stainless Steel
Yadollahi, A., Shamsaei, N., Thompson, S. M., Elwany, A. H., Bian, L., & Mahmoudi, M. (2015) · Cited by 20
Development of translucent and strong three dimensional printing models
Suwanprateeb, J., & Suwanpreuk, W. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910925063 · Cited by 18
Freeform extrusion fabrication of titanium fiber reinforced 13–93 bioactive glass scaffolds
Thomas, A., Kolan, K. C. R., Leu, M. C., & Hilmas, G. E. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.12.024 · Cited by 17
Self-citationSrivatsan, T. S., & Sudarshan, T. S. (2015) · CRC Press eBooks · doi:10.1201/b19360-6 · Cited by 12
Cited by
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Self-citationSteels in additive manufacturing: A review of their microstructure and properties
Bajaj, P., Hariharan, A., Kini, A., Kürnsteiner, P., Raabe, D., & Jägle, E. A. (2020) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.138633 · Cited by 1,020
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
du Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
Plocher, J., & Panesar, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108164 · Cited by 669
Metadata
- Authors
- Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A.
- Venue
- CIRP Annals
- Publisher
- Elsevier BV
- Published
- 2017
- Volume
- 66
- Issue
- 2
- Pages
- 659-681
- ISSN
- 0007-8506 (ISSN-L)
- OpenAlex
- W2622805139
- Cited by
- 1,034
- References
- 197
- FWCI
- 49.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.