CoChat

Advances in precursor system for silica-based aerogel production toward improved mechanical properties, customized morphology, and multifunctionality: A review

Karamikamkar, Solmaz, Naguib, Hani E., Park, Chul B. · 2020 · Advances in Colloid and Interface Science
Cited by 207

The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.

Abstract

Conventional silica-based aerogels are among the most promising materials considering their special properties, such as extremely low thermal conductivity (~15 mW/mK) and low-density (∼0.003-0.5 g.cm-3) as well as high surface area (500-1200 m2. g-1). However, they have relatively low mechanical properties and entail extensive and energy-consuming processing steps. Silica-based aerogels are mostly fragile and possess minimal mechanical properties as well as a long processing procedure which hinders their application range. The key point in improving the mechanical properties of such a material is to increase the connectivity in the aerogel backbone. Several methods of mechanical improvement of silica-based aerogels have been explored by researchers such as (i) use of flexible silica precursors in silica gel backbone, (ii) surface-crosslinking of silica particles with a polymer, (iii) prolonged aging step in different solutions, (iv) distribution of flexible nanofillers into the silica solution prior to gelation, and, most recently, (v) polymerizing the silica precursor prior to gelation. The polymerized silica precursor, as in the most recent approach, can be gelled either by binodal decomposition (nucleation and growth), resulting in a particulate structure, or by spinodal decomposition, resulting in a non-particulate structure. By optimizing the material composition and processing conditions of materials, the aerogel can be tailored with different functional capabilities. This review paper presents a literature survey of precursor modification toward increased connectivity in the backbone, and the synthesis of inorganic and hybrid systems containing siloxane in the backbone of the silica-based aerogels and its composite version with carbon nanofillers. This review also explains the novel properties and applications of these material systems in a wide area. The relationship among the materials-processing-structure-properties in these kinds of aerogels is the most important factor in the development of aerogel products with given morphologies (particulate, fiber-like, or non-particulate) and their resultant properties. This approach to advancing precursor systems leads to the next-generation, multifunctional silica-based aerogel materials.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.cis.2020.102101

Cites

9 of 9 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 9 references

Research works printed but not linked: 232

  1. Jr, 2005, General topics, Polym. News, 30, 386, 10.1080/00323910500402961 · DOI
  2. Schultz, 2005, Super insulating aerogel glazing, Sol. Energy Mater. Sol. Cells, 89, 275, 10.1016/j.solmat.2005.01.016 · DOI
  3. Alshrah, 2017, Development of high-porosity resorcinol formaldehyde aerogels with enhanced mechanical properties through improved particle necking under CO2 supercritical conditions, J. Colloid Interface Sci., 485, 65, 10.1016/j.jcis.2016.09.030 · DOI
  4. Alshrah, 2018, Nanostructure to thermal property relationship of resorcinol formaldehyde aerogels using the fractal technique, Nanoscale, 10, 10564, 10.1039/C8NR01375F · DOI
  5. Alshrah, 2018, Reinforced resorcinol formaldehyde aerogel with Co-assembled polyacrylonitrile nanofibers and graphene oxide nanosheets, Mater. Des., 151, 154, 10.1016/j.matdes.2018.04.061 · DOI
  6. Gong, 2015, Heat transfer in microcellular polystyrene/multi-walled carbon nanotube nanocomposite foams, Carbon, 93, 819, 10.1016/j.carbon.2015.06.003 · DOI · Paper page
  7. Stergar, 2016, Review of aerogel-based materials in biomedical applications, J. Sol-Gel Sci. Technol., 77, 738, 10.1007/s10971-016-3968-5 · DOI · Paper page
  8. Wittwer, 1992, Development of aerogel windows, J. Non-Cryst. Solids, 145, 233, 10.1016/S0022-3093(05)80462-4 · DOI
  9. da Cunha, 2000, On the reconstruction of Cherenkov rings from aerogel radiators, Nucl. Instrum. Methods Phys. Res. Sect. Accel. Spectrometers Detect. Assoc. Equip., 452, 401, 10.1016/S0168-9002(00)00452-6 · DOI
  10. Gibiat, 1995, Acoustic properties and potential applications of silica aerogels, J. Non-Cryst. Solids, 186, 244, 10.1016/0022-3093(95)00049-6 · DOI
  11. Long, 2000, Design of pore and matter architectures in manganese oxide charge-storage materials, Electrochem. Solid-State Lett., 3, 453, 10.1149/1.1391177 · DOI · Paper page
  12. Ward, 1995, Preparing catalytic materials by the sol-gel method, Ind. Eng. Chem. Res., 34, 421, 10.1021/ie00041a001 · DOI · Paper page
  13. Wang, 2005, Humidity sensors based on silica nanoparticle aerogel thin films, Sens. Actuators B Chem., 107, 402, 10.1016/j.snb.2004.10.034 · DOI
  14. Perdigoto, 2012, Application of hydrophobic silica based aerogels and xerogels for removal of toxic organic compounds from aqueous solutions, J. Colloid Interface Sci., 380, 134, 10.1016/j.jcis.2012.04.062 · DOI
  15. Maloney, 2012, Lithium titanate aerogel for advanced lithium-ion batteries, ACS Appl. Mater. Interfaces, 4, 2318, 10.1021/am3002742 · DOI
  16. Guise, 2001, An experimental investigation of aerosol collection utilizing packed beds of silica aerogel microspheres, J. Non-Cryst. Solids, 285, 317, 10.1016/S0022-3093(01)00473-2 · DOI
  17. Hrubesh, 1998, Aerogel applications, J. Non-Cryst. Solids, 225, 335, 10.1016/S0022-3093(98)00135-5 · DOI · Paper page
  18. Maleki, 2016, Synthesis and biomedical applications of aerogels: possibilities and challenges, Adv. Colloid Interface Sci., 236, 1, 10.1016/j.cis.2016.05.011 · DOI · Paper page
  19. Hao, 2014, Hierarchical porous carbon aerogel derived from bagasse for high performance supercapacitor electrode, Nanoscale, 6, 12120, 10.1039/C4NR03574G · DOI · Paper page
  20. Reina, 2017, Promises, facts and challenges for graphene in biomedical applications, Chem. Soc. Rev., 46, 4400, 10.1039/C7CS00363C · DOI · Paper page
  21. Moner-Girona, 2001, Mechanical properties of silica aerogels measured by microindentation: influence of sol–gel processing parameters and carbon addition, J. Non-Cryst. Solids, 285, 244, 10.1016/S0022-3093(01)00462-8 · DOI
  22. Ma, 2000, Mechanical structure–property relationship of aerogels, J. Non-Cryst. Solids, 277, 127, 10.1016/S0022-3093(00)00288-X · DOI
  23. Ma, 2001, Computer simulation of mechanical structure–property relationship of aerogels, J. Non-Cryst. Solids, 285, 216, 10.1016/S0022-3093(01)00456-2 · DOI
  24. Leventis, 2010, Click synthesis of monolithic silicon carbide aerogels from polyacrylonitrile-coated 3D silica networks, Chem. Mater., 22, 2790, 10.1021/cm903662a · DOI · Paper page
  25. Meador, 2007, Structure−property relationships in porous 3D nanostructures as a function of preparation conditions: isocyanate cross-linked silica aerogels, Chem. Mater., 19, 2247, 10.1021/cm070102p · DOI · Paper page
  26. Boday, 2010, Mechanically reinforced silica aerogel nanocomposites via surface initiated atom transfer radical polymerizations, J. Mater. Chem., 20, 6863, 10.1039/c0jm01448f · DOI
  27. Strong, Low-Density Nanocomposites by Chemical Vapor Deposition and Polymerization of Cyanoacrylates on Aminated Silica Aerogels - ACS Applied Materials & Interfaces (ACS Publications). http://pubs.acs.org/doi/abs/10.1021/am900240h. · DOI · Paper page
  28. Leventis, 2007, Three-dimensionalcore-shell superstructures: mechanically strong aerogels, Acc. Chem. Res., 40, 874, 10.1021/ar600033s · DOI · Paper page
  29. Meador, 2008, Reinforcing polymer cross-linked aerogels with carbon nanofibers, J. Mater. Chem., 18, 1843, 10.1039/b800602d · DOI
  30. Lee, 2015, Carbon nanotube-bonded graphene hybrid aerogels and their application to water purification, Nanoscale, 7, 6782, 10.1039/C5NR01018G · DOI
  31. Hong, 2016, Cartilage-inspired superelastic ultradurable graphene aerogels prepared by the selective gluing of intersheet joints, Nanoscale, 8, 12900, 10.1039/C6NR01986B · DOI
  32. Fan, 2014, Thermal and electrical properties of graphene/carbon nanotube aerogels, Colloids Surf. Physicochem. Eng. Asp., 445, 48, 10.1016/j.colsurfa.2013.12.083 · DOI
  33. Dubey, 2014, Synthesis of graphene–carbon sphere hybrid aerogel with silver nanoparticles and its catalytic and adsorption applications, Chem. Eng. J., 244, 160, 10.1016/j.cej.2014.01.042 · DOI
  34. Zhang, 2017, Cellulose nanofibril based-aerogel microreactors: a high efficiency and easy recoverable W/O/W membrane separation system, Sci. Rep., 7
  35. Xie, 2016, Interface-mediated extremely low thermal conductivity of graphene aerogel, Carbon, 98, 381, 10.1016/j.carbon.2015.11.033 · DOI
  36. Sui, 2012, Green synthesis of carbon nanotube–graphene hybrid aerogels and their use as versatile agents for water purification, J. Mater. Chem., 22, 8767, 10.1039/c2jm00055e · DOI · Paper page
  37. Wu, 2014, Carbon nanofiber aerogels for emergent cleanup of oil spillage and chemical leakage under harsh conditions, Sci. Rep., 4
  38. Zhu, 2015, Highly compressible 3D periodic graphene aerogel microlattices, Nat. Commun., 6, 6962, 10.1038/ncomms7962 · DOI · Paper page
  39. Spencer, 2003, Composition distribution in poly(ethylene-graft-vinyltrimethoxysilane), Polymer, 44, 2015, 10.1016/S0032-3861(03)00085-5 · doi:10.1016/s0032-3861(03)00085-5
  40. Matias, 2016, Novel flexible, hybrid aerogels with vinyl- and methyltrimethoxysilane in the underlying silica structure, J. Mater. Sci., 51, 6781, 10.1007/s10853-016-9965-9 · DOI
  41. Pollet, 2011, Radical-mediated graft modification of polyethylene models with vinyltrimethoxysilane: a fundamental study, Ind. Eng. Chem. Res., 50, 12246, 10.1021/ie201081g · doi:10.1021/ie201081g
  42. Venkateswara Rao, 1999, Effect of methyltrimethoxysilane as a synthesis component on the hydrophobicity and some physical properties of silica aerogels, Microporous Mesoporous Mater., 30, 267, 10.1016/S1387-1811(99)00037-2 · DOI
  43. Rao, 2006, Synthesis of flexible silica aerogels using methyltrimethoxysilane (MTMS) precursor, J. Colloid Interface Sci., 300, 279, 10.1016/j.jcis.2006.03.044 · DOI · Paper page
  44. Nadargi, 2009, Studies on rheological properties of methyltriethoxysilane (MTES) based flexible superhydrophobic silica aerogels, Microporous Mesoporous Mater., 117, 617, 10.1016/j.micromeso.2008.08.025 · DOI
  45. Guo, 2009, Elastic low density aerogels derived from bis[3-(triethoxysilyl)propyl]disulfide, tetramethylorthosilicate and vinyltrimethoxysilane via a two-step process, J. Mater. Chem., 19, 9054, 10.1039/b916355g · DOI
  46. Groβ, 1995, Scaling of elastic properties in highly porous nanostructured aerogels, Nanostructured Mater., 6, 905, 10.1016/0965-9773(95)00206-5 · DOI
  47. Shao, 2012, Rapid synthesis of amine cross-linked epoxy and methyl co-modified silica aerogels by ambient pressure drying, J. Non-Cryst. Solids, 358, 2612, 10.1016/j.jnoncrysol.2012.06.013 · DOI
  48. Zu, 2018, Transparent, superflexible doubly cross-linked polyvinylpolymethylsiloxane aerogel superinsulators via ambient pressure drying, ACS Nano, 12, 521, 10.1021/acsnano.7b07117 · DOI · Paper page
  49. Meador, 2009, Structure−property relationships in porous 3D nanostructures: epoxy-cross-linked silica aerogels produced using ethanol as the solvent, ACS Appl. Mater. Interfaces, 1, 894, 10.1021/am900014z · DOI · Paper page
  50. Li, 2009, Flexible nanofiber-reinforced aerogel (xerogel) synthesis, manufacture, and characterization, ACS Appl. Mater. Interfaces, 1, 2491, 10.1021/am900451x · DOI · Paper page
  51. Leventis, 2002, Nanoengineering strong silica aerogels, Nano Lett., 2, 957, 10.1021/nl025690e · DOI · Paper page
  52. Kramer, 1996, Organically modified silicate aerogels, “Aeromosils”, MRS Online Proc. Libr. Arch., 435
  53. Chidambareswarapattar, 2013, Fractal multiscale nanoporous polyurethanes: flexible to extremely rigid aerogels from multifunctional small molecules, Chem. Mater., 25, 3205, 10.1021/cm401623h · DOI · Paper page
  54. Nguyen, 2010, Elastic behavior of methyltrimethoxysilane based aerogels reinforced with tri-isocyanate, ACS Appl. Mater. Interfaces, 2, 1430, 10.1021/am100081a · DOI
  55. Talebi Mazraeh-shahi, 2015, Synthesis, pore structure and properties of polyurethane/silica hybrid aerogels dried at ambient pressure, J. Ind. Eng. Chem., 21, 797, 10.1016/j.jiec.2014.04.015 · DOI
  56. Fricke, 1988, Aerogels — highly tenuous solids with fascinating properties, J. Non-Cryst. Solids, 100, 169, 10.1016/0022-3093(88)90014-2 · DOI · Paper page
  57. Fricke, 1998, Aerogels—recent progress in production techniques and novel applications, J. Sol-Gel Sci. Technol., 13, 299, 10.1023/A:1008663908431 · DOI
  58. Woignier, 1998, Different kinds of structure in aerogels: relationships with the mechanical properties1, J. Non-Cryst. Solids, 241, 45, 10.1016/S0022-3093(98)00747-9 · DOI · Paper page
  59. Domènech, 2016, Tuning the structure and the mechanical properties of epoxy–silica sol–gel hybrid materials, RSC Adv., 6, 10736, 10.1039/C5RA25539B · DOI
  60. Meador, 2009, Structure−property relationships in porous 3D nanostructures: epoxy-cross-linked silica aerogels produced using ethanol as the solvent, ACS Appl. Mater. Interfaces, 1, 894, 10.1021/am900014z · DOI · Paper page
  61. Ge, 2009, Hydrophobic and thermal insulation properties of silica aerogel/epoxy composite, J. Non-Cryst. Solids, 355, 2610, 10.1016/j.jnoncrysol.2009.09.017 · DOI
  62. Silica aerogel/epoxy composites with preserved aerogel pores and low thermal conductivity : e-Polymers. https://www.degruyter.com/view/j/epoly.2015.15.issue-2/epoly-2014-0165/epoly-2014-0165.xml (2015). · DOI
  63. Meador, 2010, Epoxy reinforced aerogels made using a streamlined process, ACS Appl. Mater. Interfaces, 2, 2162, 10.1021/am100422x · DOI
  64. Meador, 2005, Cross-linkingamine-modified silica aerogels with epoxies: mechanically strong lightweight porous materials, Chem. Mater., 17, 1085, 10.1021/cm048063u · DOI · Paper page
  65. Neugebauer, 2014, Thermal conductivity and characterization of compacted, granular silica aerogel, Energy Build., 79, 47, 10.1016/j.enbuild.2014.04.025 · DOI
  66. Chang, 2014, Preparation of silica aerogel/polyurethane composites for the application of thermal insulation, J. Polym. Res., 21, 10.1007/s10965-013-0338-7 · DOI
  67. Verdolotti, 2015, Polyurethane-silica hybrid foam by sol–gel approach: Chemical and functional properties, Polymer, 56, 20, 10.1016/j.polymer.2014.10.017 · DOI
  68. Dourbash, 2017, Preparation and characterization of polyurethane/silica aerogel nanocomposite materials, J. Appl. Polym. Sci, 134, 10.1002/app.44521 · DOI
  69. Lee, 2009, Polyurea based aerogel for a high performance thermal insulation material, J. Sol-Gel Sci. Technol., 49, 209, 10.1007/s10971-008-1861-6 · DOI
  70. Sabri, 2013, Thermal conductivity studies of a polyurea cross-linked silica aerogel-RTV 655 compound for cryogenic propellant tank applications in space, Acta Astronaut., 91, 173, 10.1016/j.actaastro.2013.06.001 · doi:10.1016/j.actaastro.2013.06.001
  71. Sabri, 2013, In vivo ultrasonic detection of polyurea crosslinked silica aerogel implants, Plos One, 8, 10.1371/journal.pone.0066348 · DOI
  72. Churu, 2015, Synthesis and mechanical characterization of mechanically strong, polyurea-crosslinked, ordered mesoporous silica aerogels, J. Sol-Gel Sci. Technol., 75, 98, 10.1007/s10971-015-3681-9 · DOI
  73. Sabri, 2014, Novel technique for repair of severed peripheral nerves in rats using polyurea crosslinked silica aerogel scaffold, J. Invest. Surg., 27, 294, 10.3109/08941939.2014.906688 · doi:10.3109/08941939.2014.906688
  74. Sobani, 2013, “Grafting through” approach for synthesis of polystyrene/silica aerogel nanocomposites by in situ reversible addition-fragmentation chain transfer polymerization, J. Sol-Gel Sci. Technol., 66, 337, 10.1007/s10971-013-3015-8 · doi:10.1007/s10971-013-3015-8
  75. Khezri, 2016, Polystyrene-silica aerogel nanocomposites by in situ simultaneous reverse and normal initiation technique for ATRP, Microporous Mesoporous Mater., 228, 132, 10.1016/j.micromeso.2016.03.022 · doi:10.1016/j.micromeso.2016.03.022
  76. Mirshafiei-Langari, 2013, Synthesis of hybrid free and nanoporous silica aerogel-anchored polystyrene chains via in situ atom transfer radical polymerization, Polym. Compos., 34, 1648, 10.1002/pc.22565 · DOI
  77. Mirshafiei-Langari, 2013, In situ atom transfer radical polymerization of styrene in the presence of nanoporous silica aerogel: Kinetic study and investigation of thermal properties, J. Polym. Res., 20, 10.1007/s10965-013-0163-z · doi:10.1007/s10965-013-0163-z
  78. Wong, 2015, Mechanical and thermal properties of nanofibrillated cellulose reinforced silica aerogel composites, Microporous Mesoporous Mater., 217, 150, 10.1016/j.micromeso.2015.06.025 · DOI
  79. Nguyen, 2009, Tailoring elastic properties of silica aerogels cross-linked with polystyrene, ACS Appl. Mater. Interfaces, 1, 621, 10.1021/am8001617 · DOI · Paper page
  80. Ilhan, 2006, Hydrophobic monolithic aerogels by nanocasting polystyrene on amine-modified silica, J. Mater. Chem., 16, 3046, 10.1039/b604323b · DOI
  81. Luo, 2017, Microstructural, mechanical, and thermal-insulation properties of poly(methyl methacrylate)/silica aerogel bimodal cellular foams, J. Appl. Polym. Sci., 134, 10.1002/app.44434 · doi:10.1002/app.44434
  82. Fazli, 2015, PMMA-grafted silica aerogel nanoparticles via in situ SR&NI ATRP: grafting through approach, Microporous Mesoporous Mater., 214, 70, 10.1016/j.micromeso.2015.04.028 · doi:10.1016/j.micromeso.2015.04.028
  83. Lázár, 2015, Synthesis and study of new functionalized silica aerogel poly(methyl methacrylate) composites for biomedical use, Polym. Compos., 36, 348, 10.1002/pc.22949 · DOI
  84. Gu, 2016, Effects of silica aerogel content on microstructural and mechanical properties of poly(methyl methacrylate)/silica aerogel dual-scale cellular foams processed in supercritical carbon dioxide, J. Wuhan Univ. Technol.-Mater Sci Ed, 31, 750, 10.1007/s11595-016-1441-5 · DOI
  85. Reim, 2005, Silica aerogel granulate material for thermal insulation and daylighting, Sol. Energy, 79, 131, 10.1016/j.solener.2004.08.032 · DOI · Paper page
  86. Karamikamkar, 2019, The effect of graphene-nanoplatelets on gelation and structural integrity of a polyvinyltrimethoxysilane-based aerogel, RSC Adv., 9, 11503, 10.1039/C9RA00994A · DOI
  87. Karamikamkar, 2019, Insights into In-situ Sol-Gel Conversion in Graphene Modified Polymer-based Silica Gels for Multifunctional Aerogels, Chemical Engineering Journal
  88. Alain C. Pierre, Introduction to Sol-Gel Processing Springer.
  89. Baetens, 2011, Aerogel insulation for building applications: a state-of-the-art review, Energy Build., 43, 761, 10.1016/j.enbuild.2010.12.012 · DOI · Paper page
  90. Tsou, 1995, Silica aerogel captures cosmic dust intact, J. Non-Cryst. Solids, 186, 415, 10.1016/0022-3093(95)00065-8 · DOI · Paper page
  91. Schmidt, 1998, Applications for silica aerogel products, J. Non-Cryst. Solids, 225, 364, 10.1016/S0022-3093(98)00054-4 · DOI · Paper page
  92. Pajonk, 2003, Some applications of silica aerogels, Colloid Polym. Sci., 281, 637, 10.1007/s00396-002-0814-9 · DOI
  93. Orçaire, 2006, Application of silica aerogel encapsulated lipases in the synthesis of biodiesel by transesterification reactions, J. Mol. Catal. B Enzym., 42, 106, 10.1016/j.molcatb.2006.08.002 · DOI
  94. Soleimani Dorcheh, 2008, Silica aerogel; synthesis, properties and characterization, J. Mater. Process. Technol., 199, 10, 10.1016/j.jmatprotec.2007.10.060 · DOI · Paper page
  95. Alnaief, 2012, A novel process for coating of silica aerogel microspheres for controlled drug release applications, Microporous Mesoporous Mater., 160, 167, 10.1016/j.micromeso.2012.02.009 · DOI
  96. Bhuiya, 2016, Preparation of monolithic silica aerogel for fenestration applications: scaling up, reducing cycle time, and improving performance, Ind. Eng. Chem. Res., 55, 6971, 10.1021/acs.iecr.6b00769 · doi:10.1021/acs.iecr.6b00769
  97. Garay Martinez, 2016, Thermal assessment of ambient pressure dried silica aerogel composite boards at laboratory and field scale, Energy Build., 128, 111, 10.1016/j.enbuild.2016.06.071 · DOI
  98. Li, 2016, Aramid fibers reinforced silica aerogel composites with low thermal conductivity and improved mechanical performance, Compos. Part Appl. Sci. Manuf., 84, 316, 10.1016/j.compositesa.2016.02.014 · DOI · Paper page
  99. Feng, 2016, Silica cellulose hybrid aerogels for thermal and acoustic insulation applications, Colloids Surf. Physicochem. Eng. Asp., 506, 298, 10.1016/j.colsurfa.2016.06.052 · DOI · Paper page
  100. Kanamori, 2011, Organic–inorganic hybrid aerogels with high mechanical properties via organotrialkoxysilane-derived sol–gel process, J. Ceram. Soc. Jpn., 119, 16, 10.2109/jcersj2.119.16 · DOI
  101. Zu, 2018, Versatile double-cross-linking approach to transparent, machinable, supercompressible, highly bendable aerogel thermal superinsulators, Chem. Mater., 30, 2759, 10.1021/acs.chemmater.8b00563 · DOI · Paper page
  102. Kanamori, 2009, Spinodal decomposition in siloxane sol-gel systems in macroporous media, Soft Matter, 5, 3106, 10.1039/b903444g · doi:10.1039/b903444g
  103. Rezaei, 2019, Robust, ultra-insulative and transparent polyethylene-based hybrid silica aerogel with a novel non-particulate structure, J. Colloid Interface Sci, 548, 206, 10.1016/j.jcis.2019.04.028 · DOI
  104. Rezaei, 2019, Novel and simple design of nanostructured, super-insulative and flexible hybrid silica aerogel with a new macromolecular polyether-based precursor, J. Colloid Interface Sci., 561, 890, 10.1016/j.jcis.2019.11.072 · DOI
  105. Thommes, 2015, Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report), Pure Appl. Chem., 87, 1051, 10.1515/pac-2014-1117 · DOI · Paper page
  106. Mosanenzadeh, 2019, Structure to properties relations of BPDA and PMDA backbone hybrid diamine polyimide aerogels, Polymer, 176, 213, 10.1016/j.polymer.2019.05.050 · DOI
  107. Hæreid, 1995, Preparation and properties of monolithic silica xerogels from TEOS-based alcogels aged in silane solutions, J. Non-Cryst. Solids, 186, 96, 10.1016/0022-3093(95)00039-9 · DOI
  108. Wu, 2000, Properties of sol–gel derived scratch-resistant nano-porous silica films by a mixed atmosphere treatment, J. Non-Cryst. Solids, 275, 169, 10.1016/S0022-3093(00)00257-X · DOI
  109. Schottner, 2001, Hybrid sol−gel-derived polymers: applications of multifunctional materials, Chem. Mater., 13, 3422, 10.1021/cm011060m · DOI · Paper page
  110. Loy, 1995, Bridged polysilsesquioxanes. highly porous hybrid organic-inorganic materials, Chem. Rev., 95, 1431, 10.1021/cr00037a013 · DOI · Paper page
  111. Loy, 1995, Alkylene-bridged polysilsesquioxane aerogels: highly porous hybrid organic-inorganic materials, J. Non-Cryst. Solids, 186, 44, 10.1016/0022-3093(95)00032-1 · DOI
  112. Loy, 1996, Sol−gel synthesis of hybrid organic−inorganic materials. Hexylene- and phenylene-bridged polysiloxanes, Chem. Mater., 8, 656, 10.1021/cm950067z · DOI
  113. Shea, 2001, Bridged polysilsesquioxanes. Molecular-engineered hybrid organic−inorganic materials, Chem. Mater., 13, 3306, 10.1021/cm011074s · DOI · Paper page
  114. Dabrowski, 2007, Bridged polysilsesquioxanes as a promising class of adsorbents. A concise review, Croat. Chem. Acta, 80, 367
  115. Lin, 2014, Comparison of new periodic, mesoporous, hexylene-bridged polysilsesquioxanes with Pm3n symmetry versus sol–gel polymerized, hexylene-bridged gels, J. Non-Cryst. Solids, 406, 139, 10.1016/j.jnoncrysol.2014.09.045 · doi:10.1016/j.jnoncrysol.2014.09.045
  116. Shimizu, 2017, Transparent ethenylene-bridged polymethylsiloxane aerogels: mechanical flexibility and strength and availability for addition reaction, Langmuir, 33, 4543, 10.1021/acs.langmuir.7b00434 · DOI
  117. Smitha, 2018, Transparent and hydrophobic MTMS/GPTMS hybrid aerogel monoliths and coatings by sol-gel method: a viable remedy for oil-spill cleanup, ChemistrySelect, 3, 2989, 10.1002/slct.201702967 · DOI
  118. Nadargi, 2009, Methyltriethoxysilane: new precursor for synthesizing silica aerogels, J. Alloys Compd., 467, 397, 10.1016/j.jallcom.2007.12.019 · DOI
  119. Cui, 2011, Temperature dependent microstructure of MTES modified hydrophobic silica aerogels, Mater. Lett., 65, 606, 10.1016/j.matlet.2010.11.026 · doi:10.1016/j.matlet.2010.11.026
  120. Mahadik, 2011, Effect of concentration of trimethylchlorosilane (TMCS) and hexamethyldisilazane (HMDZ) silylating agents on surface free energy of silica aerogels, J. Colloid Interface Sci., 356, 298, 10.1016/j.jcis.2010.12.088 · DOI
  121. Shi, 2014, Preparation of silica aerogel and its adsorption performance to organic molecule, Adv. Mater. Sci. Eng., 10.1155/2014/850420 · doi:10.1155/2014/850420
  122. Wörmeyer, 2012, Amino functionalised silica-aerogels for CO2-adsorption at low partial pressure, Adsorption, 18, 163, 10.1007/s10450-012-9390-6 · DOI
  123. Ali, 2015, The use of functionalized aerogels as a low level chromium scavenger, Microporous Mesoporous Mater., 203, 8, 10.1016/j.micromeso.2014.10.004 · doi:10.1016/j.micromeso.2014.10.004
  124. Lermontov, 2016, SiO2 aerogels modified by perfluoro acid amides: a precisely controlled hydrophobicity, RSC Adv., 6, 80766, 10.1039/C6RA15444A · DOI
  125. Randall, 2013, Polymer reinforced silica aerogels: effects of dimethyldiethoxysilane and bis(trimethoxysilylpropyl)amine as silane precursors, J. Mater. Chem. A, 1, 6642, 10.1039/c3ta11019b · DOI
  126. Kanamori, K., Aizawa, M., Nakanishi, K. & Hanada, T. New transparent methylsilsesquioxane aerogels and xerogels with improved mechanical properties. Adv. Mater. 19, 1589–1593. · DOI · Paper page
  127. Zu, 2018, Superflexible multifunctional polyvinylpolydimethylsiloxane-based aerogels as efficient absorbents, thermal superinsulators, and strain sensors, Angew. Chem. Int. Ed., 57, 9722, 10.1002/anie.201804559 · DOI
  128. Shajesh, 2009, Synthesis, structure and properties of cross-linked R(SiO1.5)/SiO2 (R=3-glycidoxypropyl) porous organic inorganic hybrid networks dried at ambient pressure, J. Colloid Interface Sci., 336, 691, 10.1016/j.jcis.2009.04.023 · doi:10.1016/j.jcis.2009.04.023
  129. Martín, 2007, Organo-modified silica aerogels and implications for material hydrophobicity and mechanical properties, J. Mater. Chem., 18, 207, 10.1039/B712553D · doi:10.1039/b712553d
  130. Zhang, 2004, Isocyanate-crosslinked silica aerogel monoliths: preparation and characterization, J. Non-Cryst. Solids, 350, 152, 10.1016/j.jnoncrysol.2004.06.041 · DOI · Paper page
  131. Boday, 2008, Formation of polycyanoacrylate−silica nanocomposites by chemical vapor deposition of cyanoacrylates on aerogels, Chem. Mater., 20, 2845, 10.1021/cm703381e · DOI
  132. Katti, 2006, Chemical, physical, and mechanical characterization of isocyanate cross-linked amine-modified silica aerogels, Chem. Mater., 18, 285, 10.1021/cm0513841 · DOI · Paper page
  133. Yang, 2011, Mechanical properties of polymer-modified silica aerogels dried under ambient pressure, J. Non-Cryst. Solids, 357, 3447, 10.1016/j.jnoncrysol.2011.06.017 · DOI
  134. Guo, 2011, Polyimide aerogels cross-linked through amine functionalized polyoligomeric silsesquioxane, ACS Appl. Mater. Interfaces, 3, 546, 10.1021/am101123h · DOI · Paper page
  135. Mulik, 2008, Cross-linking 3D assemblies of nanoparticles into mechanically strong aerogels by surface-initiated free-radical polymerization, Chem. Mater., 20, 5035, 10.1021/cm800963h · DOI · Paper page
  136. Hayase, 2012, Structure and properties of polymethylsilsesquioxane aerogels synthesized with surfactant n-hexadecyltrimethylammonium chloride, Microporous Mesoporous Mater., 158, 247, 10.1016/j.micromeso.2012.03.049 · DOI
  137. Shimizu, 2017, Silicone-basedorganic–inorganic hybrid aerogels and xerogels, Chem. – Eur. J., 23, 5176, 10.1002/chem.201603680 · DOI
  138. Zu, 2018, Versatile double-cross-linking approach to transparent, machinable, supercompressible, highly bendable aerogel thermal superinsulators, Chem. Mater., 30, 2759, 10.1021/acs.chemmater.8b00563 · DOI · Paper page
  139. García-González, 2011, Polysaccharide-based aerogels—Promising biodegradable carriers for drug delivery systems, Carbohydr. Polym., 86, 1425, 10.1016/j.carbpol.2011.06.066 · DOI · Paper page
  140. Hüsing, 1998, Aerogels—airy materials: chemistry, structure, and properties, Angew. Chem. Int. Ed., 37, 22, 10.1002/(SICI)1521-3773(19980202)37:1/2<22::AID-ANIE22>3.0.CO;2-I · doi:10.1002/(sici)1521-3773(19980202)37:1/2<22::aid-anie22>3.0.co;2-i
  141. Kistler, 1931, Coherent Expanded Aerogels and Jellies, Nature, 127, 741, 10.1038/127741a0 · DOI · Paper page
  142. Lee, 2002, Synthesis of silica aerogels from waterglass via new modified ambient drying, J. Mater. Sci., 37, 2237, 10.1023/A:1015309014546 · DOI · Paper page
  143. Alié, 2001, Preparation of low-density xerogels by incorporation of additives during synthesis, J. Non-Cryst. Solids, 289, 88, 10.1016/S0022-3093(01)00697-4 · DOI
  144. Nicolaon, 1968, New preparation process for silica xerogels and aerogels, and their textural properties, Bull Soc Chim Fr, 5, 1900
  145. Sol-Gel Science - 1st Edition. https://www.elsevier.com/books/sol-gel-science/brinker/978-0-08-057103-4.
  146. Nakanishi, 1997, Pore structure control of silica gels based on phase separation, J. Porous Mater., 4, 67, 10.1023/A:1009627216939 · DOI
  147. Maleki, 2016, A new trend for development of mechanically robust hybrid silica aerogels, Mater. Lett., 179, 206, 10.1016/j.matlet.2016.05.085 · DOI
  148. Carcouët, 2014, Nucleation and growth of monodisperse silica nanoparticles, Nano Lett., 14, 1433, 10.1021/nl404550d · DOI
  149. Bisson, 2003, Drying of silica gels to obtain aerogels: Phenomenology and basic techniques, Dry. Technol., 21, 593, 10.1081/DRT-120019055 · DOI
  150. Kanamori, 2003, Phase separation in methylsiloxane sol-gel systems in a small confined space, J. Sol-Gel Sci. Technol., 26, 157, 10.1023/A:1020722326072 · doi:10.1023/a:1020722326072
  151. Arnauts, 1987, Amorphous thermoreversible gebs of atadic polystyrene, Polym. Commun., 28
  152. Furlan, 2012, Fabrication of anisotropic porous silica monoliths by means of magnetically controlled phase separation in sol–gel processes, Langmuir, 28, 12655, 10.1021/la302407j · doi:10.1021/la302407j
  153. Takahashi, 2001, Phase separation in sol–gel process of alkoxide-derived silica-zirconia in the presence of polyethylene oxide, J. Am. Ceram. Soc., 84, 1968, 10.1111/j.1151-2916.2001.tb00944.x · doi:10.1111/j.1151-2916.2001.tb00944.x
  154. Shinko, 2015, Crosslinked polyurea aerogels with controlled porosity, RSC Adv., 5, 105329, 10.1039/C5RA20788F · DOI
  155. Hench, 1990, The sol-gel process, Chem. Rev., 90, 33, 10.1021/cr00099a003 · DOI · Paper page
  156. Strøm, 2007, Strengthening and aging of wet silica gels for up-scaling of aerogel preparation, J. Sol-Gel Sci. Technol., 41, 291, 10.1007/s10971-006-1505-7 · DOI
  157. Einarsrud, 2001, Strengthening of silica gels and aerogels by washing and aging processes, J. Non-Cryst. Solids, 285, 1, 10.1016/S0022-3093(01)00423-9 · DOI
  158. Nadargi, 2009, Effect of post-treatment (gel aging) on the properties of methyltrimethoxysilane based silica aerogels prepared by two-step sol–gel process, J. Sol-Gel Sci. Technol., 49, 53, 10.1007/s10971-008-1830-0 · DOI
  159. Estella, 2007, Effects of aging and drying conditions on the structural and textural properties of silica gels, Microporous Mesoporous Mater., 102, 274, 10.1016/j.micromeso.2007.01.007 · DOI
  160. Hayase, 2011, New flexible aerogels and xerogels derived from methyltrimethoxysilane/dimethyldimethoxysilane co-precursors, J. Mater. Chem., 21, 17077, 10.1039/c1jm13664j · DOI
  161. Leventis, 2010, Multifunctional polyurea aerogels from isocyanates and water. a structure−property case study, Chem. Mater., 22, 6692, 10.1021/cm102891d · DOI · Paper page
  162. Duffours, 1995, Plastic behaviour of aerogels under isostatic pressure, J. Non-Cryst. Solids, 186, 321, 10.1016/0022-3093(95)00059-3 · DOI
  163. H, B., L, A., J.s, M. & M.m, A, 2010, 17, 122
  164. Bangi, 2012, Synthesis of MWCNTs doped sodium silicate based aerogels by ambient pressure drying, J. Sol-Gel Sci. Technol., 62, 201, 10.1007/s10971-012-2710-1 · DOI
  165. Tretyakov, 1999, Recent progress in cryochemical synthesis of oxide materials, J. Mater. Chem., 9, 19, 10.1039/a805081c · DOI · Paper page
  166. Pajonk, 1990, From sol-gel to aerogels and cryogels, J. Non-Cryst. Solids, 121, 66, 10.1016/0022-3093(90)90106-V · DOI
  167. García-González, 2012, Supercritical drying of aerogels using CO2: Effect of extraction time on the end material textural properties, J. Supercrit. Fluids, 66, 297, 10.1016/j.supflu.2012.02.026 · DOI · Paper page
  168. Tewari, 1985, Ambient-temperature supercritical drying of transparent silica aerogels, Mater. Lett., 3, 363, 10.1016/0167-577X(85)90077-1 · DOI · Paper page
  169. van Bommel, 1995, Drying of silica aerogel with supercritical carbon dioxide, J. Non-Cryst. Solids, 186, 78, 10.1016/0022-3093(95)00072-0 · DOI
  170. Durães, 2012, Effect of the drying conditions on the microstructure of silica based xerogels and aerogels, J. Nanosci. Nanotechnol., 12, 6828, 10.1166/jnn.2012.4560 · DOI
  171. Schwertfeger, 1998, Hydrophobic waterglass based aerogels without solvent exchange or supercritical drying, J. Non-Cryst. Solids, 225, 24, 10.1016/S0022-3093(98)00102-1 · DOI · Paper page
  172. Prakash, 1995, Silica aerogel films prepared at ambient pressure by using surface derivatization to induce reversible drying shrinkage, Nature, 374, 439, 10.1038/374439a0 · DOI · Paper page
  173. Hegde, 2007, Physical properties of methyltrimethoxysilane based elastic silica aerogels prepared by the two-stage sol–gel process, J. Mater. Sci., 42, 6965, 10.1007/s10853-006-1409-5 · DOI
  174. Bhagat, 2007, A cost-effective and fast synthesis of nanoporous SiO2 aerogel powders using water-glass via ambient pressure drying route, Solid State Sci., 9, 628, 10.1016/j.solidstatesciences.2007.04.020 · DOI
  175. Kartal, 2010, Surface modification of silica aerogels by hexamethyldisilazane–carbon dioxide mixtures and their phase behavior, J. Supercrit. Fluids, 53, 115, 10.1016/j.supflu.2009.11.004 · DOI
  176. Rao, 2008, Effect of protic solvents on the physical properties of the ambient pressure dried hydrophobic silica aerogels using sodium silicate precursor, J. Porous Mater., 15, 507, 10.1007/s10934-007-9104-8 · DOI
  177. Rao, 2007, Hydrophobic and physical properties of the ambient pressure dried silica aerogels with sodium silicate precursor using various surface modification agents, Appl. Surf. Sci., 253, 6032, 10.1016/j.apsusc.2006.12.117 · DOI · Paper page
  178. Orcel, 1986, Effect of formamide additive on the chemistry of silica sol-gels: Part I: NMR of silica hydrolysis, J. Non-Cryst. Solids, 79, 177, 10.1016/0022-3093(86)90045-1 · DOI
  179. Kirkbir, 1996, Drying and sintering of sol-gel derived large SiO2 monoliths, J. Sol-Gel Sci. Technol., 6, 203, 10.1007/BF00402691 · DOI
  180. Wang, 2012, Synthesis and characterization of multi-walled carbon nanotube doped silica aerogels, J. Wuhan Univ. Technol.-Mater Sci Ed, 27, 512, 10.1007/s11595-012-0494-3 · DOI
  181. Dervin, 2017, Graphene oxide reinforced high surface area silica aerogels, J. Non-Cryst. Solids, 465, 31, 10.1016/j.jnoncrysol.2017.03.030 · DOI
  182. Lei, 2017, Enhancements of thermal insulation and mechanical property of silica aerogel monoliths by mixing graphene oxide, Mater. Chem. Phys., 187, 183, 10.1016/j.matchemphys.2016.11.064 · DOI
  183. Loche, 2016, Incorporation of graphene into silica-based aerogels and application for water remediation, RSC Adv., 6, 66516, 10.1039/C6RA09618B · DOI
  184. Meng, 2015, Facile fabrication of 3D SiO2@Graphene aerogel composites as anode material for lithium ion batteries, Electrochimica Acta, 176, 1001, 10.1016/j.electacta.2015.07.141 · DOI
  185. Lamy-Mendes, 2018, Advances in carbon nanostructure–silica aerogel composites: a review, J. Mater. Chem. A, 6, 1340, 10.1039/C7TA08959G · DOI · Paper page
  186. Iijima, 1991, Helical microtubules of graphitic carbon, Nature, 354, 56, 10.1038/354056a0 · DOI · Paper page
  187. Iijima, 1993, Single-shell carbon nanotubes of 1-nm diameter, Nature, 363, 603, 10.1038/363603a0 · DOI · Paper page
  188. Carbon Nanomaterials Sourcebook: Nanoparticles, Nanocapsules, Nanofibers, Nanoporous Structures, and Nanocomposites, Volume II. CRC Press https://www.crcpress.com/Carbon-Nanomaterials-Sourcebook-Nanoparticles-Nanocapsules-Nanofibers/Sattler/p/book/9781482252705.
  189. Karamikamkar, 2018, A novel approach to producing uniform 3-D tumor spheroid constructs using ultrasound treatment, Biomed. Microdevices, 20, 10.1007/s10544-018-0260-1 · DOI
  190. Guo, 2017, Functionalization of hierarchically porous silica monoliths with polyethyleneimine (PEI) for CO2 adsorption, Microporous Mesoporous Mater., 245, 51, 10.1016/j.micromeso.2017.02.076 · DOI
  191. Hsu, 2017, Synthesis and properties of carbon nanotube-grafted silica nanoarchitecture-reinforced poly(lactic acid), Materials, 10, 10.3390/ma10070829 · DOI
  192. Song, 1995, Carbon nanostructures in silica aerogel composites, J. Mater. Res., 10, 251, 10.1557/JMR.1995.0251 · doi:10.1557/jmr.1995.0251
  193. Duque, 2011, Fluorescent single-walled carbon nanotube aerogels in surfactant-free environments, ACS Nano, 5, 6686, 10.1021/nn202225k · DOI
  194. Sun, 2014, Hydrophobic silica aerogel reinforced with carbon nanotube for oils removal, J. Porous Mater., 21, 967, 10.1007/s10934-014-9845-0 · DOI
  195. Chernov, 2016, Optical properties of silica aerogels with embedded multiwalled carbon nanotubes, Phys. Status Solidi B, 253, 2440, 10.1002/pssb.201600326 · DOI
  196. Sachithanadam, 2014, High strain recovery with improved mechanical properties of gelatin–silica aerogel composites post-binding treatment, J. Mater. Sci., 49, 163, 10.1007/s10853-013-7690-1 · DOI
  197. Huang, 2016, Hierarchical porous MWCNTs-silica aerogel synthesis for high-efficiency oily water treatment, J. Environ. Chem. Eng., 4, 3274, 10.1016/j.jece.2016.06.039 · DOI
  198. Piñero, 2018, Reinforced silica-carbon nanotube monolithic aerogels synthesised by rapid controlled gelation, J. Sol-Gel Sci. Technol., 86, 391, 10.1007/s10971-018-4645-7 · DOI
  199. Serp, 2003, Carbon nanotubes and nanofibers in catalysis, Appl. Catal. Gen., 253, 337, 10.1016/S0926-860X(03)00549-0 · DOI · Paper page
  200. Kim, 2004, Carbon nanofiber composites for the electrodes of electrochemical capacitors, Chem. Phys. Lett., 400, 253, 10.1016/j.cplett.2004.10.124 · doi:10.1016/j.cplett.2004.10.124

200 of 232 shown

Cited by

See all 207

Metadata

Authors
Karamikamkar, S., Naguib, H. E., & Park, C. B.
Venue
Advances in Colloid and Interface Science
Publisher
Elsevier BV
Published
2020-02
Volume
276
Pages
102101
ISSN
0001-8686 (ISSN-L)
OpenAlex
W2999327598
Cited by
207
References
9
FWCI
8.85
Type
journal article
Language
en
Open access
closed
Licence
  • www.elsevier.com/tdm/userlicense/1.0/ (tdm)
  • www.elsevier.com/legal/tdmrep-license (tdm)
Funders
Natural Sciences and Engineering Research Council of Canada

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Advances in precursor system for silica-based aerogel production toward improved mechanical properties, customized morphology, and multifunctionality: A review. https://app.cochat.ai/papers/10.1016/j.cis.2020.102101
The paper
Karamikamkar, S., Naguib, H. E., & Park, C. B. (2020). Advances in precursor system for silica-based aerogel production toward improved mechanical properties, customized morphology, and multifunctionality: A review. Advances in Colloid and Interface Science. https://doi.org/10.1016/j.cis.2020.102101

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.