The DOI matches its Crossref record; 103 of the 103 references it cites were found in a registry or an index.
A review of topology optimization for additive manufacturing: Status and challenges
Open accessAbstract
Topology optimization was developed as an advanced structural design methodology to generate innovative lightweight and high-performance configurations that are difficult to obtain with conventional ideas. Additive manufacturing is an advanced manufacturing technique building as-designed structures via layer-by-layer joining material, providing an alternative pattern for complex components. The integration of topology optimization and additive manufacturing can make the most of their advantages and potentials, and has wide application prospects in modern manufacturing. This article reviews the main content and applications of the research on the integration of topology optimization and additive manufacturing in recent years, including multi-scale or hierarchical structural optimization design and topology optimization considering additive manufacturing constraints. Meanwhile, some challenges of structural design approaches for additive manufacturing are discussed, such as the performance characterization and scale effects of additively manufactured lattice structures, the anisotropy and fatigue performance of additively manufactured material, and additively manufactured functionally graded material issues, etc. It is shown that in the research of topology optimization for additive manufacturing, the integration of material, structure, process and performance is important to pursue high-performance, multi-functional and lightweight production. This article provides a reference for further related research and aerospace applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generating optimal topologies in structural design using a homogenization method
Bendsøe, M. P., & Kikuchi, N. (1988) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(88)90086-2 · Cited by 7,467
A level set method for structural topology optimization
Wang, M. Y., Wang, X., & Guo, D. (2003) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(02)00559-5 · Cited by 3,232
Topology optimization approaches: A comparative review
Sigmund, O., & Maute, K. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0978-6 · Cited by 2,890
Material interpolation schemes in topology optimization
Bendsøe, M. P., & Sigmund, O. (1999) · Archive of Applied Mechanics (Ingenieur Archiv) · doi:10.1007/s004190050248 · Cited by 2,827
A simple evolutionary procedure for structural optimization
Xie, Y. M., & Steven, G. P. (1993) · Computers & Structures · doi:10.1016/0045-7949(93)90035-c · Cited by 2,707
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
On projection methods, convergence and robust formulations in topology optimization
Wang, F., Lazarov, B. S., & Sigmund, O. (2011) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-010-0602-y · Cited by 1,859
Morphology-based black and white filters for topology optimization
Sigmund, O. (2007) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-006-0087-x · Cited by 1,727
Asymptotic Analysis of Periodic Structures
Bensoussan, A., Lions, J. L., Papanicolaou, G., & Caughey, T. K. (1979) · Journal of Applied Mechanics · doi:10.1115/1.3424588 · Cited by 1,688
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
A survey of structural and multidisciplinary continuum topology optimization: post 2000
Deaton, J. D., & Grandhi, R. V. (2014) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0956-z · Cited by 1,405
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Guest, J. K., Prévost, J. H., & Belytschko, T. (2004) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1064 · Cited by 1,300
Guo, X., Zhang, W., & Zhong, W. (2014) · Journal of Applied Mechanics · doi:10.1115/1.4027609 · Cited by 1,243
Self-citationDesign of materials with extreme thermal expansion using a three-phase topology optimization method
Sigmund, O., & Torquato, S. (1997) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(96)00114-7 · Cited by 1,054
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Yadollahi, A., & Shamsaei, N. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.01.001 · Cited by 1,023
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
Simonelli, M., Tse, Y. Y., & Tuck, C. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.07.086 · Cited by 1,010
The Role of Additive Manufacturing in the Era of Industry 4.0
Dilberoglu, U. M., Gharehpapagh, B., Yaman, U., & Dolen, M. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.148 · Cited by 1,000
Topology Optimization in Aircraft and Aerospace Structures Design
Zhu, J.-H., Zhang, W.-H., & Xia, L. (2016) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-015-9151-2 · Cited by 980
Self-citationLiu, Z., Meyers, M. A., Zhang, Z., & Ritchie, R. O. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.013 · Cited by 895
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Paolini, A., Kollmannsberger, S., & Rank, E. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100894 · Cited by 673
Plocher, J., & Panesar, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108164 · Cited by 669
Yadollahi, A., Shamsaei, N., Thompson, S. M., & Seely, D. W. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.07.056 · Cited by 650
Additive manufacturing of functionally graded materials: A review
Zhang, C., Chen, F., Huang, Z., Jia, M., Chen, G., Ye, Y., Lin, Y., Liu, W., Chen, B., Shen, Q., et al. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.138209 · Cited by 612
Yadollahi, A., Shamsaei, N., Thompson, S. M., Elwany, A., & Bian, L. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.03.014 · Cited by 609
Smith, M., Guan, Z., & Cantwell, W. J. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2012.12.004 · Cited by 545
Tailoring materials with prescribed elastic properties
Sigmund, O. (1995) · Mechanics of Materials · doi:10.1016/0167-6636(94)00069-7 · Cited by 538
Panesar, A., Abdi, M., Hickman, D., & Ashcroft, I. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.008 · Cited by 489
Hierarchical optimization of material and structure
Rodrigues, H. C., Guedes, J. M., & Bendsøe, M. P. (2002) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-002-0209-z · Cited by 488
Gaynor, A. T., & Guest, J. K. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1551-x · Cited by 476
An overview of functionally graded additive manufacturing
Loh, G. H., Pei, E., Harrison, D., & Monzón, M. D. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.023 · Cited by 459
Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
Murr, L. E., Martinez, E., Hernandez, J., Collins, S., Amato, K. N., Gaytan, S. M., & Shindo, P. W. (2012) · Journal of Materials Research and Technology · doi:10.1016/s2238-7854(12)70029-7 · Cited by 425
Minimum length scale in topology optimization by geometric constraints
Zhou, M., Lazarov, B. S., Wang, F., & Sigmund, O. (2015) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2015.05.003 · Cited by 421
Topology optimization of 3D self-supporting structures for additive manufacturing
Langelaar, M. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.06.010 · Cited by 405
From Topology Optimization Design to Additive Manufacturing: Today’s Success and Tomorrow’s Roadmap
Meng, L., Zhang, W., Quan, D., Shi, G., Tang, L., Hou, Y., Breitkopf, P., Zhu, J., & Gao, T. (2020) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-019-09331-1 · Cited by 402
Self-citationLiu, F., Mao, Z., Zhang, P., Zhang, D. Z., Jiang, J., & Ma, Z. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.053 · Cited by 395
Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V
Sterling, A. J., Torries, B., Shamsaei, N., Thompson, S. M., & Seely, D. W. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.12.026 · Cited by 372
Additive manufacturing of medical instruments: A state-of-the-art review
Culmone, C., Smit, G., & Breedveld, P. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.015 · Cited by 371
Optimum structure with homogeneous optimum truss-like material
Liu, L., Yan, J., & Cheng, G. (2008) · Computers & Structures · doi:10.1016/j.compstruc.2007.04.030 · Cited by 367
Additive manufacturing of functionally graded metallic materials using laser metal deposition
Yan, L., Chen, Y., & Liou, F. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100901 · Cited by 367
An additive manufacturing filter for topology optimization of print-ready designs
Langelaar, M. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1522-2 · Cited by 365
Xia, L., & Breitkopf, P. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.05.022 · Cited by 339
Yan, C., Hao, L., Hussein, A., Young, P., Huang, J., & Zhu, W. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.01.063 · Cited by 329
Mazur, M., Leary, M., Sun, S., Vcelka, M., Shidid, D., & Brandt, M. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7655-4 · Cited by 314
On the fatigue properties of metals manufactured by selective laser melting – The role of ductility
Leuders, S., Lieneke, T., Lammers, S., Tröster, T., & Niendorf, T. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.157 · Cited by 309
Self-supporting structure design in additive manufacturing through explicit topology optimization
Guo, X., Zhou, J., Zhang, W., et al. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.05.003 · Cited by 297
Self-citationExplicit three dimensional topology optimization via Moving Morphable Void (MMV) approach
Zhang, W., Chen, J., Zhu, X., Zhou, J., Xue, D., Lei, X., & Guo, X. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.05.002 · Cited by 282
Self-citationA level set method for structural topology optimization and its applications
Yulin, M., & Xiao-ming, W. (2004) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2004.06.004 · Cited by 281
Qian, X. (2017) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5461 · Cited by 278
Reichardt, A., Dillon, R. P., Borgonia, J. P., Shapiro, A. A., McEnerney, B. W., Momose, T., & Hosemann, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.016 · Cited by 275
Bonatti, C., & Mohr, D. (2017) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.02.003 · Cited by 275
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
Yasa, E., Kruth, J.-P., & Deckers, J. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.03.063 · Cited by 265
Computational efficiency and validation of bi-directional evolutionary structural optimisation
Querin, O. M., Young, V., Steven, G. P., & Xie, Y. M. (2000) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(99)00309-6 · Cited by 263
Support-free volume printing by multi-axis motion
Dai, C., Wang, C. C. L., Wu, C., Lefebvre, S., Fang, G., & Liu, Y.-J. (2018) · ACM Transactions on Graphics · doi:10.1145/3197517.3201342 · Cited by 252
Self-citationZhang, P., Toman, J., Yu, Y., Biyikli, E., Kırca, M., Chmielus, M., & To, A. C. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028724 · Cited by 248
Coelho, P. G., Fernandes, P. R., Guedes, J. M., et al. (2007) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-007-0141-3 · Cited by 242
Scale‐related topology optimization of cellular materials and structures
Zhang, W., & Sun, S. (2006) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1743 · Cited by 237
Self-citationProcess planning for additive and subtractive manufacturing technologies
Newman, S. T., Zhu, Z., Dhokia, V., & Shokrani, A. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.04.109 · Cited by 231
Optimum structure with homogeneous optimum cellular material for maximum fundamental frequency
Niu, B., Yan, J., & Cheng, G. (2008) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-008-0334-4 · Cited by 227
3D Printing of Carbon Nanotubes-Based Microsupercapacitors
Yu, W., Zhou, H., Li, B. Q., & Ding, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13904 · Cited by 227
Self-citationDeng, J., Yan, J., & Cheng, G. (2012) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-012-0849-6 · Cited by 222
Recent development in structural design and optimization
Guo, X., & Cheng, G. (2010) · Acta Mechanica Sinica · doi:10.1007/s10409-010-0395-7 · Cited by 214
Structural optimization under overhang constraints imposed by additive manufacturing technologies
Allaire, G., Dapogny, C., Estevez, R., Faure, A., & Michailidis, G. (2017) · Journal of Computational Physics · doi:10.1016/j.jcp.2017.09.041 · Cited by 212
Zhu, Y., Tian, X., Li, J., & Wang, H. (2015) · Materials & Design · doi:10.1016/j.matdes.2014.11.001 · Cited by 203
Tang, Y., Kurtz, A., & Zhao, Y. F. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.06.001 · Cited by 198
A new methodological framework for design for additive manufacturing
Kumke, M., Watschke, H., & Vietor, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1139377 · Cited by 192
Finite element modeling concepts and linear analyses of 3D regular open cell structures
Luxner, M. H., Stampfl, J., & Pettermann, H. E. (2005) · Journal of Materials Science · doi:10.1007/s10853-005-5020-y · Cited by 191
Xia, L., & Breitkopf, P. (2015) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.12.018 · Cited by 185
Feature-driven topology optimization method with signed distance function
Zhou, Y. L., Zhang, W., Zhu, J., & Xu, Z. (2016) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2016.06.027 · Cited by 182
Self-citationSupport slimming for single material based additive manufacturing
Hu, K., Jin, S., & Wang, C. C. L. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.03.001 · Cited by 178
Self-citationSHI, G., GUAN, C., QUAN, D., WU, D., TANG, L., & GAO, T. (2020) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2019.09.006 · Cited by 176
Liu, S., Li, Q., Chen, W., Tong, L., & Cheng, G. (2015) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-015-0340-3 · Cited by 169
Structural topology optimization considering connectivity constraint
Li, Q., Chen, W., Liu, S., & Tong, L. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1459-5 · Cited by 167
Design of a C/SiC functionally graded coating for the oxidation protection of C/C composites
Kim, J. I., Kim, W.-J., Choi, D. J., Park, J. Y., & Ryu, W.-S. (2005) · Carbon · doi:10.1016/j.carbon.2005.02.025 · Cited by 164
Lattice Structure Design and Optimization With Additive Manufacturing Constraints
Tang, Y., Dong, G., Zhou, Q., & Zhao, Y. F. (2017) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2017.2685643 · Cited by 163
Wang, C., Gu, X., Zhu, J., Zhou, H., Li, S., & Zhang, W. (2020) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-019-02408-2 · Cited by 150
Self-citationTopology optimization of self-supporting structures with polygon features for additive manufacturing
Zhang, W., & Lü, Z. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.01.037 · Cited by 128
Self-citationTopology optimization of self-supporting support structures for additive manufacturing
Mezzadri, F., Bouriakov, V., & Qian, X. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.04.016 · Cited by 122
Hao, P., Wang, B., Li, G., Meng, Z., Tian, K., & Tang, X. (2014) · Thin-Walled Structures · doi:10.1016/j.tws.2014.04.004 · Cited by 116
A new methodological framework for design for additive manufacturing*
Kumke, M., Watschke, H., & Vietor, T. (2017) · CRC Press eBooks · doi:10.1201/9781315119106-12 · Cited by 111
Garaigordobil, A., Ansola, R., Santamaría, J., & de Bustos, I. F. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-2010-7 · Cited by 108
Microstructure and mechanical anisotropy of additively manufactured cold spray copper deposits
Yin, S., Jenkins, R., Yan, X., & Lupoi, R. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.07.096 · Cited by 107
Part orientation optimisation for the additive layer manufacture of metal components
MORGAN, H., Cherry, J. A., Jonnalagadda, S., Ewing, D., & Sienz, J. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-8151-6 · Cited by 102
Simultaneous optimization of build orientation and topology for additive manufacturing
Wang, C., & Qian, X. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101246 · Cited by 99
Self-citationA comprehensive study of feature definitions with solids and voids for topology optimization
Zhang, W., Zhou, Y. L., & Zhu, J. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.07.004 · Cited by 94
Self-citationTopology optimization of 3D continuum structures under geometric self-supporting constraint
Bi, M., Tran, P., & Xie, Y. M. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101422 · Cited by 93
Cheng, L., Liang, X. Y., Belski, E., Wang, X., Sietins, J. M., Ludwick, S., & To, A. C. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4040622 · Cited by 91
Mass, Y., & Amir, O. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.001 · Cited by 88
Xia, Q., & Wang, M. Y. (2008) · Computer-Aided Design · doi:10.1016/j.cad.2008.01.014 · Cited by 81
Topology optimization method with elimination of enclosed voids
Lü, Z., & Zhang, W. (2019) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-019-02204-y · Cited by 77
Self-citationDesign and experimental validation of self-supporting topologies for additive manufacturing
Fu, Y.-F., Rolfe, B., Chiu, L. N. S., Wang, Y., Huang, X., & Ghabraie, K. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1637023 · Cited by 73
Yang, K., Zhu, J., Wang, C., Jia, D. S., Song, L. L., & Zhang, W. (2018) · Computational Mechanics · doi:10.1007/s00466-018-1537-1 · Cited by 67
Self-citationBi-Directional Evolutionary Topology Optimization Using Element Replaceable Method
Zhu, J., Zhang, W. H., & Qiu, K. P. (2006) · Computational Mechanics · doi:10.1007/s00466-006-0087-0 · Cited by 63
Self-citationShape optimization of a layer by layer mechanical constraint for additive manufacturing
Allaire, G., Dapogny, C., Faure, A., & Michailidis, G. (2017) · Comptes Rendus Mathématique · doi:10.1016/j.crma.2017.04.008 · Cited by 48
Functionally graded materials from topology optimisation and stereolithography
Liu, T., Guessasma, S., Zhu, J., Zhang, W., & Belhabib, S. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.08.038 · Cited by 46
Self-citationDu, Y., Chen, J., Liu, X., Lu, C. P., Xu, J., Paul, B., & Eklund, P. (2018) · Coatings · doi:10.3390/coatings8010025 · Cited by 39
Meng, L., Qiu, X., Gao, T., Li, Z.-Y., & Zhang, W. (2020) · Composite Structures · doi:10.1016/j.compstruct.2020.112363 · Cited by 39
Self-citationYin, S. (2018) · Data Archiving and Networked Services (DANS) · doi:10.17632/vy693tgctm.1 · Cited by 35
A superelement formulation for the efficient layout design of complex multi-component system
Xia, L., Zhu, J., & Zhang, W. (2011) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-011-0720-1 · Cited by 29
Self-citationOptimal Packing Configuration Design with Finite-Circle Method
Zhu, J., Zhang, W., Xia, L., Zhang, Q., & Bassir, D. (2011) · Journal of Intelligent & Robotic Systems · doi:10.1007/s10846-011-9645-6 · Cited by 24
Self-citationBi-directional evolutionary method for stiffness optimisation
Yang, X., Xie, Y. M., Steven, G. P., & Querin, O. M. (1998) · AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (MAO) · doi:10.2514/6.1998-4900 · Cited by 23
Size effect of lattice material and minimum weight design
Yan, J., Hu, W., Wang, Z., & Duan, Z. (2014) · Acta Mechanica Sinica · doi:10.1007/s10409-014-0001-5 · Cited by 18
Cited by
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Self-citationChen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
Additive manufacturing of heat exchangers in aerospace applications: a review
Careri, F., Khan, R. H. U., Todd, C., & Attallah, M. M. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121387 · Cited by 320
Recent advances of additive manufacturing in implant fabrication – A review
Mobarak, M. H., Islam, M. A., Hossain, N., Al Mahmud, M. Z., Rayhan, M. T., Nishi, N. J., & Chowdhury, M. A. (2023) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2023.100462 · Cited by 307
Metadata
- Authors
- ZHU, J., ZHOU, H., WANG, C., ZHOU, L., YUAN, S., & ZHANG, W.
- Venue
- Chinese Journal of Aeronautics
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 34
- Issue
- 1
- Pages
- 91-110
- ISSN
- 1000-9361 (ISSN-L)
- OpenAlex
- W3093210795
- Cited by
- 874
- References
- 103
- FWCI
- 45.43
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.