The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Magnetic programming of 4D printed shape memory composite structures
Abstract
Abstract 4D printed shape memory polymers and their composites are currently a highly topical research area. The potential applications for 4D printed smart materials are wide-reaching, with particular promise for personalized medicine. In this work, we 4D printed various structures made of biocompatible and biodegradable polylactic acid (PLA) and PLA/Fe3O4 composite filaments. The shape memory behaviors of the 4D printed structures triggered by magnetic field were investigated. The printed structures can return to their original shapes with a high speed in just a few seconds. Moreover, the structures like bone tissues printed by PLA/Fe3O4 composites filaments with 15% Fe3O4 were actuated by magnetic field at 27.5 kHz. During the shape recovery process, surface temperature of the printed structures is uniform and around 40 °C. This physiologically relevant operating temperature range is a highly attractive feature for potential healthcare and biomedical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Behl, M., & Lendlein, A. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70047-0 · Cited by 1,965
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
Self-citationHu, J., Zhu, Y., Huang, H., & Lu, J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.001 · Cited by 1,279
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
Self-citation3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
Self-citation4D Biofabrication Using Shape‐Morphing Hydrogels
Kirillova, A., Maxson, R., Stoychev, G., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 494
Ultrafast Digital Printing toward 4D Shape Changing Materials
Huang, L., Jiang, R., Wu, J., Song, J., Bai, H., Li, B., Zhao, Q., & Xie, T. (2017) · Advanced Materials · doi:10.1002/adma.201605390 · Cited by 490
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate
Miao, S., Zhu, W., Castro, N. J., Nowicki, M., Zhou, X., Cui, H., Fisher, J. P., & Zhang, L. G. (2016) · Scientific Reports · doi:10.1038/srep27226 · Cited by 477
4D Printing of Shape Memory‐Based Personalized Endoluminal Medical Devices
Zarek, M., Mansour, N., Shapira, S., & Cohn, D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600628 · Cited by 419
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
Li, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
Self-folding all-polymer thermoresponsive microcapsules
Stoychev, G., Puretskiy, N., & Ionov, L. (2011) · Soft Matter · doi:10.1039/c1sm05109a · Cited by 348
Additive manufacturing of multi-directional preforms for composites: opportunities and challenges
Quan, Z., Wu, A., Keefe, M., Qin, X., Yu, J., Suhr, J., Byun, J.-H., Kim, B.-S., & Chou, T.-W. (2015) · Materials Today · doi:10.1016/j.mattod.2015.05.001 · Cited by 324
4D Printing: History and Recent Progress
Wu, J.-J., Huang, L.-M., Zhao, Q., & Xie, T. (2018) · Chinese Journal of Polymer Science · doi:10.1007/s10118-018-2089-8 · Cited by 219
Triple shape memory polymers by 4D printing
Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aabc2a · Cited by 187
Hendrikson, W. J., Rouwkema, J., Clementi, F., van Blitterswijk, C. A., Farè, S., & Moroni, L. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8114 · Cited by 177
4D printing of net shape parts made from Ni-Mn-Ga magnetic shape-memory alloys
Caputo, M. P., Berkowitz, A. E., Armstrong, A., Müllner, P., & Solomon, C. V. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.028 · Cited by 176
Responsive Biomaterials: Advances in Materials Based on Shape‐Memory Polymers
Hardy, J. G., Palma, M., Wind, S. J., & Biggs, M. J. (2016) · Advanced Materials · doi:10.1002/adma.201505417 · Cited by 169
Shape memory behavior and recovery force of 4D printed textile functional composites
Zhang, W., Zhang, F., Lan, X., Leng, J., Wu, A. S., Bryson, T. M., Cotton, C., Gu, B., Sun, B., & Chou, T. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.03.037 · Cited by 161
Self-citationIntelligent materials: a review of applications in 4D printing
Li, X., Shang, J., & Wang, Z. (2017) · Assembly Automation · doi:10.1108/aa-11-2015-093 · Cited by 148
Shape memory effect in 3D-printed scaffolds for self-fitting implants
Senatov, F. S., Zadorozhnyy, M. Y., Niaza, K. V., Medvedev, V. V., Kaloshkin, S. D., Anisimova, N. Y., Kiselevskiy, M., & Yang, K.-C. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.06.011 · Cited by 144
Enhanced multimaterial 4D printing with active hinges
Akbari, S., Sakhaei, A. H., Kowsari, K., Yang, B., Serjouei, A., Yuanfang, Z., & Ge, Q. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aabe63 · Cited by 143
Liu, Y., Zhang, W., Zhang, F., Lan, X., Leng, J., Liu, S., Jia, X., Cotton, C., Sun, B., Gu, B., et al. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.07.053 · Cited by 142
Self-citationCabrera, M. S., Sanders, B., Goor, O. J. G. M., Driessen‐Mol, A., Oomens, C. W. J., & Baaijens, F. F. (2017) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2016.0052 · Cited by 120
Remote, fast actuation of programmable multiple shape memory composites by magnetic fields
Zhang, F. H., Zhang, Z. C., Luo, C. J., Lin, I.-T., Liu, Y., Leng, J., & Smoukov, S. K. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc02464a · Cited by 112
Self-citationA biodegradable functional water-responsive shape memory polymer for biomedical applications
Guo, Y., Lv, Z., Huo, Y., Sun, L., Chen, S., Liu, Z., He, C., Bi, X., Fan, X., & You, Z. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb02462f · Cited by 102
Chen, F., Gao, Q., Hong, G., & Ni, J. (2008) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2008.02.132 · Cited by 36
Collagen skin, a water-sensitive shape memory material
Han, Y., Hu, J., & Jiang, L. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01346b · Cited by 36
Cited by
A Review of Shape Memory Polymers and Composites: Mechanisms, Materials, and Applications
Xia, Y., He, Y., Zhang, F., Liu, Y., & Leng, J. (2021) · Advanced Materials · doi:10.1002/adma.202000713 · Cited by 1,281
Self-citationAdditive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Four-dimensional bioprinting: Current developments and applications in bone tissue engineering
Wan, Z., Zhang, P., Liu, Y., Lv, L., & Zhou, Y. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.10.038 · Cited by 368
Self-citationRecent Advances in 3D Printing of Smart Scaffolds for Bone Tissue Engineering and Regeneration
Yuan, X., Zhu, W., Yang, Z., He, N., Chen, F., Han, X., & Zhou, K. (2024) · Advanced Materials · doi:10.1002/adma.202403641 · Cited by 339
Metadata
- Authors
- Zhang, F., Wang, L., Zheng, Z., Liu, Y., & Leng, J.
- Venue
- Composites Part A: Applied Science and Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 125
- Pages
- 105571
- ISSN
- 1359-835X (ISSN-L)
- OpenAlex
- W2965738952
- Cited by
- 267
- References
- 37
- FWCI
- 15.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.