The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
A Review of 3D Printing Technology for Medical Applications
Open accessAbstract
Donor shortages for organ transplantations are a major clinical challenge worldwide. Potential risks that are inevitably encountered with traditional methods include complications, secondary injuries, and limited source donors. Three-dimensional (3D) printing technology holds the potential to solve these limitations; it can be used to rapidly manufacture personalized tissue engineering scaffolds, repair tissue defects in situ with cells, and even directly print tissue and organs. Such printed implants and organs not only perfectly match the patient’s damaged tissue, but can also have engineered material microstructures and cell arrangements to promote cell growth and differentiation. Thus, such implants allow the desired tissue repair to be achieved, and could eventually solve the donor-shortage problem. This review summarizes relevant studies and recent progress on four levels, introduces different types of biomedical materials, and discusses existing problems and development issues with 3D printing that are related to materials and to the construction of extracellular matrix in vitro for medical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Highly stretchable and tough hydrogels
Sun, J.-Y., Zhao, X., Illeperuma, W. R. K., Chaudhuri, O., Oh, K. H., Mooney, D. J., Vlassak, J. J., & Suo, Z. (2012) · Nature · doi:10.1038/nature11409 · Cited by 5,481
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Why are double network hydrogels so tough?
Gong, J. P. (2010) · Soft Matter · doi:10.1039/b924290b · Cited by 2,328
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
The role of bioreactors in tissue engineering
Martin, I., Wendt, D., & Heberer, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2003.12.001 · Cited by 1,215
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
A comprehensive review on droplet-based bioprinting: Past, present and future
Gudapati, H., Dey, M., & Ozbolat, I. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.06.012 · Cited by 859
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Gauvin, R., Chen, Y.-C., Lee, J. W., Soman, P., Zorlutuna, P., Nichol, J. W., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.048 · Cited by 641
Xu, T., Binder, K. W., Albanna, M. Z., Dice, D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 631
Michael, S., Sorg, H., Peck, C.-T., Koch, L., Deiwick, A., Chichkov, B., Vogt, P. M., & Reimers, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0057741 · Cited by 623
Scaffold development using 3D printing with a starch-based polymer
Lam, C. X. F., Mo, X. M., Teoh, S. H., & Hutmacher, D. W. (2002) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(02)00012-7 · Cited by 614
A three-dimensional osteochondral composite scaffold for articular cartilage repair
Sherwood, J. K., Riley, S. L., Palazzolo, R., Brown, S. C., Monkhouse, D. C., Coates, M., Griffith, L. G., Landeen, L. K., & Ratcliffe, A. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00223-5 · Cited by 610
Xu, T., Zhao, W., Zhu, J.-M., Albanna, M. Z., Yoo, J. J., & Atala, A. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.035 · Cited by 607
Three-dimensional printing of Hela cells for cervical tumor model in vitro
Zhao, Y., Yao, R., Ouyang, L., Ding, H., Zhang, T., Zhang, K., Cheng, S., & Sun, W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035001 · Cited by 534
Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
Saunders, R. E., Gough, J. E., & Derby, B. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.032 · Cited by 495
Design and 3D Printing of Scaffolds and Tissues
An, J., Teoh, J. E. M., Suntornnond, R., & Chua, C. K. (2015) · Engineering · doi:10.15302/j-eng-2015061 · Cited by 461
Kim, S. S., Utsunomiya, H., Koski, J. A., Wu, B. M., Cima, M. J., Sohn, J., Mukai, K., Griffith, L. G., & Vacanti, J. P. (1998) · Annals of Surgery · doi:10.1097/00000658-199807000-00002 · Cited by 451
Sing, S. L., Yeong, W. Y., & Wiria, F. E. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.11.141 · Cited by 414
Fedorovich, N. E., Schuurman, W., Wijnberg, H. M., Prins, H.-J., van Weeren, P. R., Malda, J., Alblas, J., & Dhert, W. J. A. (2012) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0060 · Cited by 403
Direct writing of three-dimensional webs
Gratson, G. M., Xu, M., & Lewis, J. A. (2004) · Nature · doi:10.1038/428386a · Cited by 389
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Trombetta, R., Inzana, J. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1678-3 · Cited by 377
Wu, C., Luo, Y., Cuniberti, G., Xiao, Y., & Gelinsky, M. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.03.009 · Cited by 363
Direct selective laser sintering and melting of ceramics: a review
Sing, S. L., Yeong, W. Y., Wiria, F. E., Tay, B. Y., Zhao, Z., Zhao, L., Tian, Z., & Yang, S. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0178 · Cited by 359
Organ printing: from bioprinter to organ biofabrication line
Mironov, V., Kasyanov, V., & Markwald, R. R. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.02.006 · Cited by 343
Human Cartilage Repair with a Photoreactive Adhesive-Hydrogel Composite
Sharma, B., Fermanian, S., Gibson, M., Unterman, S., Herzka, D. A., Cascio, B., Coburn, J., Hui, A. Y., Marcus, N., Gold, G. E., et al. (2013) · Science Translational Medicine · doi:10.1126/scitranslmed.3004838 · Cited by 342
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
Trends in Organ Donation and Transplantation in the United States, 1999-2008
Wolfe, R. A., Roys, E. C., & Merion, R. M. (2010) · American Journal of Transplantation · doi:10.1111/j.1600-6143.2010.03021.x · Cited by 313
Sing, S. L., Wiria, F. E., & Yeong, W. Y. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.06.006 · Cited by 302
Fischer, M., Joguet, D., Robin, G., Peltier, L., & Laheurte, P. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.02.033 · Cited by 295
Speirs, M., Van Hooreweder, B., Van Humbeeck, J., & Kruth, J.-P. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.01.016 · Cited by 267
Biophysical Regulation of Cell Behavior—Cross Talk between Substrate Stiffness and Nanotopography
Yang, Y., Wang, K., Gu, X., & Leong, K. W. (2017) · Engineering · doi:10.1016/j.eng.2017.01.014 · Cited by 263
Hydrogels in healthcare: From static to dynamic material microenvironments
Kirschner, C. M., & Anseth, K. S. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.037 · Cited by 255
Fisher, J. P., Vehof, J. W. M., Dean, D., van der Waerden, J. P. C. M., Holland, T. A., Mikos, A. G., & Jansen, J. A. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1268 · Cited by 254
Skin Bioprinting: Impending Reality or Fantasy?
Ng, W. L., Wang, S., Yeong, W. Y., & Naing, M. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.04.006 · Cited by 249
Microvalve-based bioprinting – process, bio-inks and applications
Ng, W. L., Lee, J. M., Yeong, W. Y., & Win Naing, M. (2017) · Biomaterials Science · doi:10.1039/c6bm00861e · Cited by 229
Current progress in 3D printing for cardiovascular tissue engineering
Mosadegh, B., Xiong, G., Dunham, S., & Min, J. K. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/3/034002 · Cited by 174
Additive manufacturing for in situ repair of osteochondral defects
Cohen, D. L., Lipton, J. I., Bonassar, L. J., & Lipson, H. (2010) · Biofabrication · doi:10.1088/1758-5082/2/3/035004 · Cited by 169
Wang, K., Ho, C., Zhang, C., & Wang, B. (2017) · Engineering · doi:10.1016/j.eng.2017.05.013 · Cited by 161
Recent Progress in Cartilage Tissue Engineering—Our Experience and Future Directions
Liu, Y., Zhou, G., & Cao, Y. (2017) · Engineering · doi:10.1016/j.eng.2017.01.010 · Cited by 158
Mogali, S. R., Yeong, W. Y., Tan, H. K. J., Tan, G. J. S., Abrahams, P., Zary, N., Low‐Beer, N., & Ferenczi, M. A. (2017) · Anatomical Sciences Education · doi:10.1002/ase.1703 · Cited by 152
3D‐Printable Antimicrobial Composite Resins
Yue, J., Zhao, P. T., Gerasimov, J. Y., van de Lagemaat, M., Grotenhuis, A., Rustema‐Abbing, M., van der Mei, H. C., Busscher, H. J., Herrmann, A. P., & Ren, Y. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502384 · Cited by 150
Medical rapid prototyping and 3D CT in the manufacture of custom made cranial titanium plates
Winder, J. R., Cooke, R. S., Gray, J., et al. (1999) · Journal of Medical Engineering & Technology · doi:10.1080/030919099294401 · Cited by 139
Indirect fabrication of collagen scaffold based on inkjet printing technique
Yeong, W. Y., Chua, C. K., Leong, K. F., et al. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610682741 · Cited by 116
Rapid Prototyping of a Double-Layer Polyurethane–Collagen Conduit for Peripheral Nerve Regeneration
Cui, T., Yan, Y., Zhang, R., Liu, L., Xu, W., & Wang, X. (2008) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2008.0354 · Cited by 111
Izquierdo‐Barba, I., García‐Martín, J. M., Álvarez, R., Palmero, A., Esteban, J., Pérez‐Jorge, C., Arcos, D., & Vallet‐Regí, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.023 · Cited by 102
3D printed bio-models for medical applications
Yap, Y. L., Tan, E. Y. S., Tan, H. K. J., Peh, Z. K., Low, X. Y., Yeong, W. Y., Tan, C. S. H., & Laude, A. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0102 · Cited by 102
Arakaki, K., Kitamura, N., FUJIKI, H., Kurokawa, T., Iwamoto, M., Ueno, M., Kanaya, F., Osada, Y., Gong, J. P., & Yasuda, K. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32613 · Cited by 100
Koch, L., Brandt, O., Deiwick, A., & Chichkov, B. N. (2017) · International Journal of Bioprinting · doi:10.18063/ijb.2017.01.001 · Cited by 98
Regenerative Engineering for Knee Osteoarthritis Treatment: Biomaterials and Cell-Based Technologies
Ivirico, J. L. E., Bhattacharjee, M., Kuyinu, E. L., Nair, L. S., & Laurencin, C. T. (2017) · Engineering · doi:10.1016/j.eng.2017.01.003 · Cited by 75
Fabrication of titanium based biphasic scaffold using selective laser melting and collagen immersion
Sing, S. L., Wang, S., Agarwala, S., Wiria, F. E., Ha, T. M. H., & Yeong, W. Y. (2017) · International Journal of Bioprinting · doi:10.18063/ijb.2017.01.007 · Cited by 52
Perfusion flow bioreactor for 3D in situ imaging: Investigating cell/biomaterials interactions
Stephens, J. S., Cooper, J. A., Phelan, F. R., & Dunkers, J. P. (2006) · Biotechnology and Bioengineering · doi:10.1002/bit.21252 · Cited by 47
Design and preparation of biocompatible zwitterionic hydroxyapatite
Sánchez‐Salcedo, S., Colilla, M., Izquierdo‐Barba, I., & Vallet‐Regí, M. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb00122a · Cited by 46
Preventing bacterial adhesion on scaffolds for bone tissue engineering
Sánchez‐Salcedo, S., Colilla, M., Izquierdo‐Barba, I., & Vallet‐Regí, M. (2016) · International Journal of Bioprinting · doi:10.18063/ijb.2016.01.008 · Cited by 31
Design Criteria for a Modular Tissue-Engineered Construct
McGuigan, A. P., & Sefton, M. V. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0245 · Cited by 30
Noncoding RNAs and Their Potential Therapeutic Applications in Tissue Engineering
Li, S., Qian, T., Wang, X., Liu, J., & Gu, X. (2017) · Engineering · doi:10.1016/j.eng.2017.01.005 · Cited by 30
Chen, L., Zhu, W., Fei, Z.-Q., Chen, J., Xiong, J., Zhang, J., Duan, L., Huang, J., Liu, Z., Wang, D., et al. (2013) · BioMed Research International · doi:10.1155/2013/412745 · Cited by 21
Cited by
An Overview on 3D Printing Technology: Technological, Materials, and Applications
Shahrubudin, N., Lee, T. C., & Ramlan, R. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.06.089 · Cited by 2,050
Plocher, J., & Panesar, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108164 · Cited by 669
Shanmugam, V., Das, O., Babu, K., Marimuthu, U., Veerasimman, A., Johnson, D. J., Neisiany, R. E., Hedenqvist, M. S., Ramakrishna, S., & Berto, F. (2021) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.106007 · Cited by 538
The Recent Progress and Applications of Digital Technologies in Healthcare: A Review
Senbekov, M., Saliev, T., Bukeyeva, Z., Almabayeva, A., Zhanaliyeva, M., Aitenova, N., Toishibekov, Y., & Fakhradiyev, I. (2020) · International Journal of Telemedicine and Applications · doi:10.1155/2020/8830200 · Cited by 415
3D printing technology; methods, biomedical applications, future opportunities and trends
Bozkurt, Y., & Karayel, E. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.050 · Cited by 384
Metadata
- Authors
- Yan, Q., Dong, H., Su, J., Han, J., Song, B., Wei, Q., & Shi, Y.
- Venue
- Engineering
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 4
- Issue
- 5
- Pages
- 729-742
- ISSN
- 2095-8099 (ISSN-L)
- OpenAlex
- W2886154463
- Cited by
- 720
- References
- 66
- FWCI
- 22.37
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.