The DOI matches its Crossref record; 179 of the 179 references it cites were found in a registry or an index.
Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review
Abstract
Abstract Battery safety has attracted attention worldwide due to current trends in communication and mobilization brought about by rapidly evolving versions of smartphones, tablets, laptops, and other electronic devices, as well as the continuing increase in the number of electric vehicles. Mechanical abuse condition is one of the most critical scenarios with possible catastrophic results, such as fire or explosion of lithium-ion batteries. This comprehensive review aims to describe the complete mechanical–electrochemical–thermal coupled behavior of lithium-ion batteries through a review of experimental, theoretical, and modeling studies in each battery evolution phase under mechanical abuse loading. In addition, this review summarizes a state-of-the-art modeling framework to describe the multiphysical behavior of batteries. The intention of this review is to compile studies to understand safety issues and unravel mechanisms for hazardous behaviors of the mechanical integrity of the battery cell.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
Thermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
Yoo, E., Kim, J., Hosono, E., Zhou, H.-S., Kudo, T., & Honma, I. (2008) · Nano Letters · doi:10.1021/nl800957b · Cited by 2,921
The lithium-ion battery: State of the art and future perspectives
Zubi, G., Dufo-López, R., Carvalho, M., & Pasaoglu, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.002 · Cited by 2,563
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548
Diffusion and heat transfer in chemical kinetics
Frank-Kamenet︠s︡kiĭ, D. A. (1969) · Medical Entomology and Zoology · Cited by 2,299
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Arora, P., & Zhang, Z. (. (2004) · Chemical Reviews · doi:10.1021/cr020738u · Cited by 2,175
The development and future of lithium ion batteries
Blomgren, G. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0251701jes · Cited by 1,940
A review on the separators of liquid electrolyte Li-ion batteries
Zhang, S. S. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.065 · Cited by 1,671
Abuse behavior of high-power, lithium-ion cells
Spotnitz, R., & Franklin, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00488-3 · Cited by 1,373
Safety mechanisms in lithium-ion batteries
Balakrishnan, P. G., Ramesh, R., & Prem Kumar, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.002 · Cited by 1,132
A review of advanced and practical lithium battery materials
Marom, R., Amalraj, S. F., Leifer, N., Jacob, D., & Aurbach, D. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04225k · Cited by 1,075
Lu, Z., MacNeil, D. D., & Dahn, J. R. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1407994 · Cited by 941
Feng, X., Fang, M., He, X., Ouyang, M., Lu, L., Wang, H., & Zhang, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.005 · Cited by 918
A three-dimensional thermal abuse model for lithium-ion cells
Kim, G.-H., Pesaran, A., & Spotnitz, R. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.04.018 · Cited by 877
Safety focused modeling of lithium-ion batteries: A review
Abada, S., Marlair, G., Lecocq, A., Petit, M., Sauvant-Moynot, V., & Huet, F. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.100 · Cited by 819
Review of models for predicting the cycling performance of lithium ion batteries
Santhanagopalan, S., Guo, Q., Ramadass, P., & White, R. E. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.05.070 · Cited by 806
A Review on Lithium-Ion Batteries Safety Issues: Existing Problems and Possible Solutions
Wen, J., Yu, Y., & Chen, C. (2012) · Materials Express · doi:10.1166/mex.2012.1075 · Cited by 754
A review of carbon materials and their composites with alloy metals for sodium ion battery anodes
Balogun, M.-S., Luo, Y., Qiu, W., Liu, P., & Tong, Y. (2016) · Carbon · doi:10.1016/j.carbon.2015.09.091 · Cited by 671
Thermal Model of Cylindrical and Prismatic Lithium-Ion Cells
Hatchard, T. D., MacNeil, D. D., Basu, A., & Dahn, J. R. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1377592 · Cited by 624
Richard, M. N., & Dahn, J. R. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391893 · Cited by 601
Chemical Reactivity of PF[sub 5] and LiPF[sub 6] in Ethylene Carbonate/Dimethyl Carbonate Solutions
Sloop, S. E., Pugh, J. K., Wang, S., Kerr, J. B., & Kinoshita, K. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1353158 · Cited by 577
Deng, Y., Feng, C., E, J., Zhu, H., Chen, J., Wen, M., & Yin, H. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.043 · Cited by 542
Ruiz, V., Pfrang, A., Kriston, A., Omar, N., Van den Bossche, P., & Boon-Brett, L. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.195 · Cited by 534
Titanium‐Based Anode Materials for Safe Lithium‐Ion Batteries
Chen, Z., Belharouak, I., Sun, Y. ‐., & Amine, K. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200698 · Cited by 525
Comparative Issues of Cathode Materials for Li-Ion Batteries
Julien, C., Mauger, A., Zaghib, K., & Groult, H. (2014) · Inorganics · doi:10.3390/inorganics2010132 · Cited by 513
Investigation on the fire-induced hazards of Li-ion battery cells by fire calorimetry
Ribière, P., Grugeon, S., Morcrette, M., Boyanov, S., Laruelle, S., & Marlair, G. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02218k · Cited by 505
Qi, Y., Guo, H., Hector, L. G., & Timmons, A. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3327913 · Cited by 491
A review of safety-focused mechanical modeling of commercial lithium-ion batteries
Zhu, J., Wierzbicki, T., & Li, W. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.034 · Cited by 482
Thermal modeling and design considerations of lithium-ion batteries
Al Hallaj, S., Maleki, H., Hong, J. S., & Selman, J. R. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00178-0 · Cited by 454
Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity
Sahraei, E., Hill, R., & Wierzbicki, T. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.094 · Cited by 439
Electro-thermal modeling and experimental validation for lithium ion battery
Ye, Y., Shi, Y., Cai, N., Lee, J., & He, X. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.027 · Cited by 438
Ren, D., Liu, X., Feng, X., Lu, L., Ouyang, M., Li, J., & He, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.06.126 · Cited by 438
Thermal Stability Studies of Li‐Ion Cells and Components
Maleki, H., Deng, G., Anani, A., & Howard, J. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392458 · Cited by 437
Pasquier, A. D., Disma, F., Bowmer, T., Gozdz, A. S., Amatucci, G., & Tarascon, J. ‐. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838287 · Cited by 436
Bower, A. F., Guduru, P. R., & Sethuraman, V. A. (2011) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2011.01.003 · Cited by 404
Modeling and short circuit detection of 18650 Li-ion cells under mechanical abuse conditions
Sahraei, E., Campbell, J., & Wierzbicki, T. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.057 · Cited by 401
A failure modes, mechanisms, and effects analysis (FMMEA) of lithium-ion batteries
Hendricks, C., Williard, N., Mathew, S., & Pecht, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.100 · Cited by 381
Lee, W.-B., Bang, K.-S., & Jung, S.-B. (2005) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2004.07.057 · Cited by 368
Transport Processes and Separation Process Principles (Includes Unit Operations)
Geankoplis, C. J. (2007) · CERN Document Server (European Organization for Nuclear Research) · Cited by 360
Analysis of internal short-circuit in a lithium ion cell
Santhanagopalan, S., Ramadass, P., & Zhang, J. (. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.05.002 · Cited by 351
Greve, L., & Fehrenbach, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.04.055 · Cited by 350
On safety of lithium-ion cells
Biensan, P., Simon, B. M., Pérès, J.-P., de Guibert, A., Broussely, M., Bodet, J. M., & Perton, F. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00135-4 · Cited by 342
Differential scanning calorimetry material studies: implications for the safety of lithium-ion cells
Zhang, Z., Fouchard, D., & Rea, J. R. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02611-6 · Cited by 330
Safety issues caused by internal short circuits in lithium-ion batteries
Liu, B., Jia, Y., Li, J., Yin, S., Yuan, C., Hu, Z., Wang, L., Li, Y., & Xu, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08997c · Cited by 327
Self-citationFinegan, D. P., Darcy, E., Keyser, M., Tjaden, B., Heenan, T. M. M., Jervis, R., Bailey, J. J., Malik, R., Vo, N. T., Magdysyuk, O. V., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00385d · Cited by 326
Large Plastic Deformation in High‐Capacity Lithium‐Ion Batteries Caused by Charge and Discharge
Zhao, K., Pharr, M., Cai, S., Vlassak, J. J., & Suo, Z. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04432.x · Cited by 322
Guo, G., Long, B., Cheng, B., Zhou, S., Xu, P., & Cao, B. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.10.090 · Cited by 322
Novel thermal management system using mist cooling for lithium-ion battery packs
Saw, L. H., Poon, H. M., Thiam, H. S., Cai, Z., Chong, W. T., Pambudi, N. A., & King, Y. J. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.042 · Cited by 314
Internal short circuit in Li-ion cells
Maleki, H., & Howard, J. N. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.02.070 · Cited by 313
Characteristics of lithium-ion batteries during fire tests
Larsson, F., Andersson, P., Blomqvist, P., Lorén, A., & Mellander, B.-E. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.027 · Cited by 313
Ethyl acetate as a substitute for diethyl ether in the formalin-ether sedimentation technique
Young, K. H., Bullock, S. L., Melvin, D. M., & Spruill, C. L. (1979) · Journal of Clinical Microbiology · doi:10.1128/jcm.10.6.852-853.1979 · Cited by 308
Jiang, J., & Dahn, J. R. (2004) · Electrochemistry Communications · doi:10.1016/j.elecom.2003.10.011 · Cited by 303
A consideration of lithium cell safety
Tobishima, S., & Yamaki, J. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00240-7 · Cited by 291
Jeong, S.-K., Inaba, M., Mogi, R., Iriyama, Y., Abe, T., & Ogumi, Z. (2001) · Langmuir · doi:10.1021/la015553h · Cited by 288
Can Li-Ion batteries be the panacea for automotive applications?
Opitz, A., Badami, P., Shen, L., Vignarooban, K., & Kannan, A. M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.019 · Cited by 284
Xing, L., Li, W., Wang, C., Gu, F., Xu, M., Tan, C., & Yi, J. (2009) · The Journal of Physical Chemistry B · doi:10.1021/jp9074064 · Cited by 272
Thermal abuse performance of high-power 18650 Li-ion cells
Roth, E. P., & Doughty, D. H. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.068 · Cited by 270
Homogenized mechanical properties for the jellyroll of cylindrical Lithium-ion cells
Wierzbicki, T., & Sahraei, E. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.04.135 · Cited by 265
Zhang, C., Santhanagopalan, S., Sprague, M. A., & Pesaran, A. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.04.162 · Cited by 257
Deformation and failure mechanisms of 18650 battery cells under axial compression
Zhu, J., Zhang, X., Sahraei, E., & Wierzbicki, T. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.10.064 · Cited by 250
Perspectives of automotive battery R&D in China, Germany, Japan, and the USA
Bresser, D., Hosoi, K., Howell, D., Li, H., Zeisel, H., Amine, K., & Passerini, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.039 · Cited by 249
Evaluation of mechanical abuse techniques in lithium ion batteries
Lamb, J., & Orendorff, C. J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.066 · Cited by 246
Mechanical Properties of a Battery Separator under Compression and Tension
Cannarella, J., Liu, X., Leng, C. Z., Sinko, P. D., Gor, G. Y., & Arnold, C. B. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0191411jes · Cited by 242
Usseglio-Viretta, F. L. E., Colclasure, A., Mistry, A. N., Claver, K. P. Y., Pouraghajan, F., Finegan, D. P., Heenan, T. M. M., Abraham, D., Mukherjee, P. P., Wheeler, D., et al. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0731814jes · Cited by 238
Coman, P. T., Rayman, S., & White, R. E. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.088 · Cited by 235
Wang, Y., Jiang, J., & Dahn, J. R. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2007.07.033 · Cited by 231
Sahraei, E., Bosco, E., Dixon, B., & Lai, B. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.005 · Cited by 222
Thermal stability of LiPF6/EC+DEC electrolyte with charged electrodes for lithium ion batteries
Wang, Q., Sun, J., Yao, X., & Chen, C. H. (2005) · Thermochimica Acta · doi:10.1016/j.tca.2005.06.010 · Cited by 220
Integrated computation model of lithium-ion battery subject to nail penetration
Liu, B., Yin, S., & Xu, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.101 · Cited by 219
Self-citationHoriba, T. (2014) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2319832 · Cited by 218
Constitutive behavior and progressive mechanical failure of electrodes in lithium-ion batteries
Zhang, C., Xu, J., Cao, L., Wu, Z., & Santhanagopalan, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.04.103 · Cited by 211
Self-citationIdentifying the Cause of Rupture of Li‐Ion Batteries during Thermal Runaway
Finegan, D. P., Darcy, E., Keyser, M., Tjaden, B., Heenan, T. M. M., Jervis, R., Bailey, J. J., Vo, N. T., Magdysyuk, O. V., Drakopoulos, M., et al. (2018) · Advanced Science · doi:10.1002/advs.201700369 · Cited by 207
Wang, Y., Zaghib, K., Guerfi, A., Bazito, F. F. C., Torresi, R. M., & Dahn, J. R. (2007) · Electrochimica Acta · doi:10.1016/j.electacta.2007.04.067 · Cited by 201
State of Charge Dependent Mechanical Integrity Behavior of 18650 Lithium-ion Batteries
Xu, J., Liu, B., & Hu, D. (2016) · Scientific Reports · doi:10.1038/srep21829 · Cited by 199
Self-citationDynamic mechanical integrity of cylindrical lithium-ion battery cell upon crushing
Xu, J., Liu, B., Wang, L., & Shang, S. (2015) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2015.03.025 · Cited by 196
Self-citationLai, W., Ali, M. Y., & Pan, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.128 · Cited by 194
Zhang, X., Sahraei, E., & Wang, K. (2016) · Scientific Reports · doi:10.1038/srep32578 · Cited by 189
Modeling Nail Penetration Process in Large-Format Li-Ion Cells
Zhao, W., Luo, G., & Wang, C.-Y. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1071501jes · Cited by 187
Investigation of Short-Circuit Scenarios in a Lithium-Ion Battery Cell
Zavalis, T. G., Behm, M., & Lindbergh, G. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.096206jes · Cited by 186
Dynamic impact tests on lithium-ion cells
Kisters, T., Sahraei, E., & Wierzbicki, T. (2017) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2017.04.025 · Cited by 185
Experimental triggers for internal short circuits in lithium-ion cells
Orendorff, C. J., Roth, E. P., & Nagasubramanian, G. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.035 · Cited by 181
A phase‐field model for chemo‐mechanical induced fracture in lithium‐ion battery electrode particles
Miehe, C., Dal, H., Schänzel, L. ‐., & Raina, A. (2016) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5133 · Cited by 181
Fang, W., Ramadass, P., & Zhang, Z. (. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.004 · Cited by 177
Multi-scale study of thermal stability of lithiated graphite
Chen, Z., Qin, Y., Ren, Y., Lu, W., Orendorff, C., Roth, E. P., & Amine, K. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01786a · Cited by 177
Experimental simulation of internal short circuit in Li-ion and Li-ion-polymer cells
Cai, W., Wang, H., Maleki, H., Howard, J. N., & Lara‐Curzio, E. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.04.024 · Cited by 169
Abaza, A., Ferrari, S., Wong, H. K., Lyness, C., Moore, A., Weaving, J., Blanco-Martin, M., Dashwood, R., & Bhagat, R. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.01.015 · Cited by 169
Study of the fire hazards of lithium-ion batteries at different pressures
Chen, M., Liu, J., He, Y., Yuen, R. K. K., & Wang, J. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.06.131 · Cited by 166
Mechanical behavior and failure mechanisms of Li-ion battery separators
Kalnaus, S., Wang, Y., & Turner, J. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.003 · Cited by 164
An electrochemical modeling of lithium-ion battery nail penetration
Chiu, K.-C., Lin, C.-H., Yeh, S.-F., Lin, Y.-H., & Chen, K.-C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.069 · Cited by 159
Thermal Stability and Reactivity of Cathode Materials for Li-Ion Batteries
Huang, Y., Lin, Y.-C., Jenkins, D. M., Chernova, N. A., Chung, Y., Radhakrishnan, B., Chu, I.-H., Fang, J., Wang, Q., Omenya, F., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12081 · Cited by 159
Secondary-Phase Stochastics in Lithium-Ion Battery Electrodes
Mistry, A. N., Smith, K. A., & Mukherjee, P. P. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b17771 · Cited by 157
Modelling of cracks developed in lithium-ion cells under mechanical loading
Sahraei, E., Kahn, M., Meier, J., et al. (2015) · RSC Advances · doi:10.1039/c5ra17865g · Cited by 156
Jia, Y., Yin, S., Liu, B., Zhao, H., Yu, H., Li, J., & Xu, J. (2018) · Energy · doi:10.1016/j.energy.2018.10.142 · Cited by 150
Self-citationEffects of additives on thermal stability of Li ion cells
Doughty, D. H., Roth, E. P., Crafts, C. C., Nagasubramanian, G., Henriksen, G. L., & Amine, K. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.170 · Cited by 148
An inorganic composite membrane as the separator of Li-ion batteries
Zhang, S. S., Xu, K., & Jow, T. R. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.07.034 · Cited by 147
Zhang, C., Santhanagopalan, S., Sprague, M., & Pesaran, A. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.08.049 · Cited by 146
Xu, J., Wang, L., Guan, J., & Yin, S. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.082 · Cited by 145
Self-citationTobishima, S., Takei, K., Sakurai, Y., & Yamaki, J. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00409-2 · Cited by 144
Liu, B., Zhao, H., Yu, H., Li, J., & Xu, J. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.10.045 · Cited by 144
Self-citationBower, A. F., & Guduru, P. R. (2012) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/20/4/045004 · Cited by 143
Characterization of plasticity and fracture of shell casing of lithium-ion cylindrical battery
Zhang, X., & Wierzbicki, T. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.077 · Cited by 143
Wang, H., Simunovic, S., Maleki, H., Howard, J. N., & Hallmark, J. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.026 · Cited by 140
Mechanical characterization and modeling for anodes and cathodes in lithium-ion batteries
Wang, L., Yin, S., Zhang, C., Huan, Y., & Xu, J. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.007 · Cited by 139
Self-citationAli, M. Y., Lai, W., & Pan, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.022 · Cited by 138
State of charge influence on thermal reactions and abuse tests in commercial lithium-ion cells
Péréa, A., Paolella, A., Dubé, J., Champagne, D., Mauger, A., & Zaghib, K. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.07.112 · Cited by 138
Trembacki, B. L., Mistry, A. N., Noble, D. R., Ferraro, M. E., Mukherjee, P. P., & Roberts, S. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0981813jes · Cited by 136
Saw, L. H., Ye, Y., Yew, M. C., Chong, W. T., Yew, M. K., & Ng, T. C. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.04.022 · Cited by 132
Effect of carbon coating on LiNi1/3Mn1/3Co1/3O2 cathode material for lithium secondary batteries
Kim, H., Kong, M., Kim, K., Kim, I.-J., & Gu, H.-B. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.028 · Cited by 130
Sun, G., Sui, T., Song, B., Zheng, H. C., Lü, L., & Korsunsky, A. M. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.03.018 · Cited by 129
A multi-scale approach for the stress analysis of polymeric separators in a lithium-ion battery
Xiao, X., Wu, W., & Huang, X. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.020 · Cited by 123
Deng, Z., Yang, L., Deng, H., Cai, Y., & Li, D. (2017) · Energy · doi:10.1016/j.energy.2017.10.097 · Cited by 123
Roberts, S. A., Brunini, V., Long, K., & Grillet, A. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0081411jes · Cited by 119
Modeling Internal Shorting Process in Large-Format Li-Ion Cells
Zhao, W., Luo, G., & Wang, C.-Y. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1031507jes · Cited by 116
Ramadass, P., Fang, W., & Zhang, Z. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.145 · Cited by 115
Thermal stability of electrolytes with LixCoO2 cathode or lithiated carbon anode
Yamaki, J.-I., Baba, Y., Katayama, N., et al. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00254-4 · Cited by 114
Li, W., Xia, Y., Zhu, J., & Luo, H. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0051809jes · Cited by 114
Chen, M., Bai, F., Song, W., Lv, J., Lin, S., Feng, Z., Li, Y., & Ding, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.03.135 · Cited by 113
On the thermal conduction equation for self-heating materials with surface cooling
Thomas, P. (1958) · Transactions of the Faraday Society · doi:10.1039/tf9585400060 · Cited by 111
Oxygen Evolution in Overcharged LixNi1/3Co1/3Mn1/3O2 Electrode and Its Thermal Analysis Kinetics
Wang, H., Tang, A., & Huang, K. (2011) · Chinese Journal of Chemistry · doi:10.1002/cjoc.201180284 · Cited by 107
Xu, J., Jia, Y., Liu, B., Zhao, H., Yu, H., Li, J., & Yin, S. (2018) · Experimental Mechanics · doi:10.1007/s11340-018-0380-9 · Cited by 107
Self-citationWang, S., Li, Y., Li, Y., et al. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.159 · Cited by 106
Internal Short Circuit Trigger Method for Lithium-Ion Battery Based on Shape Memory Alloy
Zhang, M., Du, J., Liu, L., Stefanopoulou, A. G., Siegel, J. B., Lu, L., He, X., Xie, X., & Ouyang, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0731713jes · Cited by 106
Mechanical integrity of 18650 lithium-ion battery module: Packing density and packing mode
Liu, B., Zhang, J., Zhang, C., & Xu, J. (2018) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2018.04.041 · Cited by 106
Self-citationModeling stresses in the separator of a pouch lithium-ion cell
Shi, D., Xiao, X., Huang, X., & Kia, H. G. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.05.026 · Cited by 102
Kuruba, R., Datta, M. K., Damodaran, K., Jampani, P., Gattu, B., Patel, P. P., Shanthi, P. M., Damle, S. S., & Kumta, P. N. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.102 · Cited by 101
Stochastic Analysis of Diffusion Induced Damage in Lithium-Ion Battery Electrodes
Barai, P., & Mukherjee, P. P. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.132306jes · Cited by 98
Pressure-Gradient Dependent Diffusion and Crack Propagation in Lithiated Silicon Nanowires
Grantab, R., & Shenoy, V. B. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.072205jes · Cited by 90
Lithium battery thermal models
Doughty, D. H., Butler, P. C., Jungst, R. G., & Roth, E. P. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00198-2 · Cited by 90
Adhesion strength of the cathode in lithium-ion batteries under combined tension/shear loadings
Luo, H., Zhu, J., Sahraei, E., & Xia, Y. (2018) · RSC Advances · doi:10.1039/c7ra12382e · Cited by 90
Wu, B., & Lu, W. D. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.12.005 · Cited by 88
A multiphysics model for the in situ stress analysis of the separator in a lithium-ion battery cell
Wu, W., Xiao, X., Huang, X., & Yan, S. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2013.10.002 · Cited by 86
Microscopic model for fracture of crystalline Si nanopillars during lithiation
Ryu, I., Lee, S. W., Gao, H., Cui, Y., & Nix, W. D. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.137 · Cited by 86
Fusing Phenomenon of Lithium-Ion Battery Internal Short Circuit
Zhang, M., Liu, L., Stefanopoulou, A. G., Siegel, J. B., Lu, L., He, X., & Ouyang, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1721712jes · Cited by 83
Dynamic mechanical behavior of lithium-ion pouch cells subjected to high-velocity impact
Chen, Y., Santhanagopalan, S., Babu, V., & Ding, Y. C. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.03.046 · Cited by 82
Non-dimensional analysis of the criticality of Li-ion battery thermal runaway behavior
Huang, P., Chen, H., Verma, A., Wang, Q., Mukherjee, P. P., & Sun, J. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.01.049 · Cited by 80
Unlocking the significant role of shell material for lithium-ion battery safety
Wang, L., Yin, S., Yu, Z., Wang, Y., Yu, T., Zhao, J., Xie, Z., Li, Y., & Xu, J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.10.002 · Cited by 78
Self-citationA Microstructural Resolved Model for the Stress Analysis of Lithium-Ion Batteries
Wu, W., Xiao, X., Wang, M., & Huang, X. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.082405jes · Cited by 73
Preventing Li-ion cell explosion during thermal runaway with reduced pressure
Hofmann, A., Uhlmann, N., Ziebert, C., Wiegand, O., Schmidt, A., & Hanemann, T. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.06.056 · Cited by 73
Testing and Modeling the Mechanical Properties of the Granular Materials of Graphite Anode
Zhu, J., Li, W., Xia, Y., & Sahraei, E. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0141807jes · Cited by 71
Purkayastha, R. T., & McMeeking, R. M. (2012) · Computational Mechanics · doi:10.1007/s00466-012-0724-8 · Cited by 69
Experimental Study on the Combustion Characteristics of Primary Lithium Batteries Fire
Chen, M., He, Y., Zhou, C., Yuen, R. K. K., & Wang, J. (2014) · Fire Technology · doi:10.1007/s10694-014-0450-1 · Cited by 69
Study of lithium diffusivity in amorphous silicon via finite element analysis
Wang, M., Xiao, X., & Huang, X. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.082 · Cited by 67
Thermal Stability of Delithiated LiMn[sub 2]O[sub 4] with Electrolyte for Lithium-Ion Batteries
Wang, Q., Sun, J., & Chen, C. H. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2433698 · Cited by 66
Thigh burns from exploding e-cigarette lithium ion batteries: First case series
Nicoll, K., Rose, A., Khan, M. A. A., Quaba, O., & Lowrie, A. G. (2016) · Burns · doi:10.1016/j.burns.2016.03.027 · Cited by 65
Barai, P., Smith, K. A., Chen, C., Kim, G., & Mukherjee, P. P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0241509jes · Cited by 63
A multiphysics microstructure-resolved model for silicon anode lithium-ion batteries
Wang, M., Xiao, X., & Huang, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.02.037 · Cited by 60
Stress and Strain in Silicon Electrode Models
Higa, K., & Srinivasan, V. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0091507jes · Cited by 59
Kim, C.-S., Yoo, J. S., Jeong, K., Kim, K., & Yi, C.-W. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.04.010 · Cited by 59
Multiscale modeling and characterization for performance and safety of lithium-ion batteries
Pannala, S., Turner, J., Allu, S., Elwasif, W. R., Kalnaus, S., Simunovic, S., Kumar, A., Billings, J. J., Wang, H., & Nanda, J. (2015) · Journal of Applied Physics · doi:10.1063/1.4927817 · Cited by 55
Rate- and Temperature-Dependent Material Behavior of a Multilayer Polymer Battery Separator
Avdeev, I. V., Martinsen, M., & Francis, A. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0743-4 · Cited by 53
Liu, B., Wang, X., Chen, H., Chen, S., Hong-xin, Y., Xu, J., Jiang, H., & Fang, D.-N. (2019) · Journal of Applied Mechanics · doi:10.1115/1.4042432 · Cited by 53
Self-citationYuan, C., Gao, X., Wong, H. K., Feng, B., & Xu, J. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.1071906jes · Cited by 52
Self-citationMai, W., Colclasure, A. M., & Smith, K. A. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0101908jes · Cited by 50
Analysis of Battery Safety and Hazards' Risk Mitigation
Ashtiani, C. (2008) · ECS Transactions · doi:10.1149/1.2897967 · Cited by 49
Effects of thermal hazard on 18650 lithium-ion battery under different states of charge
Chen, W., Li, J.-D., Shu, C., & Wang, Y.-W. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-4672-3 · Cited by 49
A study on carbon-coated LiNi1/3Mn1/3Co1/3O2 cathode material for lithium secondary batteries
Kim, H., Kim, K., Moon, S., Kim, I.-J., & Gu, H.-B. (2008) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-008-0552-0 · Cited by 46
An experimental study about the effect of arrangement on the fire behaviors of lithium-ion batteries
Chen, M., Yuen, R. K. K., & Wang, J. (2017) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-017-6158-y · Cited by 46
Numerical Modeling of Damage Evolution Phenomenon in Solid-State Lithium-Ion Batteries
Behrou, R., & Maute, K. K. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1101712jes · Cited by 46
Exploding E-Cigarettes: A Battery Safety Issue
Saxena, S., Kong, L., & PECHT, M. G. (2018) · IEEE Access · doi:10.1109/access.2018.2821142 · Cited by 45
Jaguemont, J., Omar, N., Martel, F., den Bossche, P. V., & Mierlo, J. V. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.028 · Cited by 40
Salvadori, A., Grazioli, D., Geers, M. G. D., Danilov, D. L., & Notten, P. H. L. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.114 · Cited by 39
Gwak, Y., Moon, J., & Cho, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.037 · Cited by 39
Experimental Quantification of Vent Mechanism Flow Parameters in 18650 Format Lithium Ion Batteries
Mier, F. A., Hargather, M. J., & Ferreira, S. R. (2019) · Journal of Fluids Engineering · doi:10.1115/1.4042962 · Cited by 37
Shigematsu, Y., Ue, M., & Yamaki, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3056035 · Cited by 36
Wang, X., Singh, S. S., Ma, T., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00701 · Cited by 34
Polydopamine hydrophilic modification of polypropylene separator for lithium ion battery
Wang, D., Zhao, Z., Yu, L., Zhang, K., Na, H., Ying, S., Xu, D., & Zhang, G. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40543 · Cited by 33
Wu, L., Wen, Y., & Zhang, J. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.11.042 · Cited by 33
Gao, Z., Zhang, X., Xiao, Y., Wang, H., & Li, N. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.01.150 · Cited by 30
Mechanistic Analysis of Mechano-Electrochemical Interaction in Silicon Electrodes with Surface Film
Verma, A., & Mukherjee, P. P. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0391714jes · Cited by 28
Damle, S. S., Pal, S., Kumta, P. N., & Maiti, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.027 · Cited by 25
Analysis of Battery Safety and Hazards' Risk Mitigation
Ashtiani, C. (2007) · ECS Meeting Abstracts · doi:10.1149/ma2007-02/4/211 · Cited by 6
Thermal injury caused by the explosion of a lithium‐ion mobile phone battery
Corazza, M., Forconi, R., Musmeci, D., Toni, G., & Borghi, A. (2017) · Journal of the European Academy of Dermatology and Venereology · doi:10.1111/jdv.14494 · Cited by 5
Cited by
A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards
Chen, Y., Kang, Y., Zhao, Y., Wang, L., Liu, J., Li, Y., Liang, Z., He, X., Li, X., Tavajohi, N., et al. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.10.017 · Cited by 2,178
Self-citationStrategies for the Stabilization of Zn Metal Anodes for Zn‐Ion Batteries
Yi, Z., Chen, G., Hou, F., Wang, L., & Liang, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003065 · Cited by 942
Self-citationHao, J., Li, X., Zeng, X., Li, D., Mao, J., & Guo, Z. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02162h · Cited by 840
Ren, D., Feng, X., Liu, L., Hsu, H., Lu, L., Wang, L., He, X., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.020 · Cited by 698
Self-citationZinc Anode for Mild Aqueous Zinc-Ion Batteries: Challenges, Strategies, and Perspectives
Yang, J., Yin, B., Sun, Y., Pan, H., Sun, W., Jia, B., Zhang, S., & Ma, T. (2022) · Nano-Micro Letters · doi:10.1007/s40820-021-00782-5 · Cited by 584
Metadata
- Authors
- Liu, B., Jia, Y., Yuan, C., Wang, L., Gao, X., Yin, S., & Xu, J.
- Venue
- Energy Storage Materials
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 24
- Pages
- 85-112
- ISSN
- 2405-8289 (ISSN-L)
- 2405-8297
- OpenAlex
- W2953816312
- Cited by
- 816
- References
- 179
- FWCI
- 32.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.