The DOI matches its Crossref record; 162 of the 162 references it cites were found in a registry or an index.
Research progress on power battery cooling technology for electric vehicles
Abstract
In the charging and discharging process of new energy vehicles, how to maintain power battery within optimum operating temperature range, reduce the peak temperature and temperature difference, which is a problem needs to be paid attention to. Proper cooling technology can reduce the negative influence of temperature on battery pack, effectively improve power battery efficiency, improve the safety in use, reduce the aging rate, and extend its service life. In this context, several battery thermal management systems(BTMS) are reviewed, including air cooling BTMS, liquid cooling BTMS and refrigerant direct cooling BTMS in traditional battery thermal management system; phase change material-based BTMS, heat pipe-based BTMS and thermoelectric element-based BTMS in new battery thermal management system. In order to reduce negative influence of excessive temperature on the battery pack, and to seek feasible solutions for BTMS in future development, the above six power battery cooling technologies are discussed. Summarize the research emphases and research progress of different BTMS at present. Objectively evaluate the advantages and disadvantages of each BTMS. Considering actual working conditions, the installation feasibility, as well as economic benefits of each BTMS, then discuss proper solutions, and predict future development trends reasonably. Finally, analyze and discuss the differences and gaps between traditional and new BTMS. Providing a reference for designing the best BYMS solution. Ensuring the battery is in the optimum operating temperature range, maintain the BTMS stable operation, and improve battery conversion efficiency, providing valuable solutions for the BTMS research in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Thermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Temperature effect and thermal impact in lithium-ion batteries: A review
Ma, S., Jiang, M., Tao, P., Song, C., Wu, J., Wang, J., Deng, T., & Shang, W. (2018) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2018.11.002 · Cited by 1,674
A critical review of battery thermal performance and liquid based battery thermal management
Wu, W., Wang, S., Wu, W., Chen, K., Hong, S., & Lai, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.051 · Cited by 1,214
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Battery thermal models for hybrid vehicle simulations
Pesaran, A. A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00200-8 · Cited by 1,116
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
A review of thermoelectric cooling: Materials, modeling and applications
Zhao, D., & Tan, G. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.01.074 · Cited by 968
Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery
Forgez, C., Vinh Do, D., Friedrich, G., Morcrette, M., & Delacourt, C. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.10.105 · Cited by 942
A review of lithium deposition in lithium-ion and lithium metal secondary batteries
Li, Z., Huang, J., Yann Liaw, B., Metzler, V., & Zhang, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.099 · Cited by 938
Recent development and application of thermoelectric generator and cooler
He, W., Zhang, G., Zhang, X., Ji, J., Li, G., & Zhao, X. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.12.075 · Cited by 816
Self-citationReciprocating air flow for Li-ion battery thermal management to improve temperature uniformity
Mahamud, R., & Park, C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.02.076 · Cited by 787
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Wang, T., Tseng, K. J., Zhao, J., & Wei, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.013 · Cited by 713
Investigation of power battery thermal management by using mini-channel cold plate
Huo, Y., Rao, Z., Liu, X., & Zhao, J. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.015 · Cited by 712
A review of hazards associated with primary lithium and lithium-ion batteries
Lisbona, D., & Snee, T. (2011) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2011.06.022 · Cited by 701
Du, K., Calautit, J., Wang, Z., Wu, Y., & Liu, H. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.005 · Cited by 688
Rezvanizaniani, S. M., Liu, Z., Chen, Y., & Lee, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.085 · Cited by 684
Sabbah, R., Kizilel, R., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.03.082 · Cited by 680
2012 American Control Conference (ACC)
(2012) · doi:10.1109/acc19473.2012 · Cited by 669
A Novel Thermal Management System for Electric Vehicle Batteries Using Phase-Change Material
Hallaj, S. A., & Selman, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393888 · Cited by 662
A review on battery thermal management in electric vehicle application
Xia, G., Cao, L., & Bi, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.046 · Cited by 641
The latest advancements on thermochemical heat storage systems
Aydin, D., Casey, S. P., & Riffat, S. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.08.054 · Cited by 576
Ling, Z., Zhang, Z., Shi, G., Fang, X., Wang, L., Gao, X., Fang, Y., Xu, T., Wang, S., & Liu, X. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.017 · Cited by 558
Deng, Y., Feng, C., E, J., Zhu, H., Chen, J., Wen, M., & Yin, H. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.043 · Cited by 542
Rao, Z., Qian, Z., Kuang, Y., & Li, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.06.059 · Cited by 535
Fan, L., Khodadadi, J. M., & Pesaran, A. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.050 · Cited by 534
Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling
Saw, L. H., Ye, Y., Tay, A. A. O., Chong, W. T., Kuan, S. H., & Yew, M. C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.122 · Cited by 527
An alternative cooling system to enhance the safety of Li-ion battery packs
Kizilel, R., Sabbah, R., Selman, J. R., & Al-Hallaj, S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.074 · Cited by 513
A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles
Park, H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.102 · Cited by 497
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Rao, Z., Wang, S., Wu, M., Lin, Z., & Li, F. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.08.014 · Cited by 486
Zhao, J., Rao, Z., & Li, Y. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.06.056 · Cited by 481
Wu, W., Yang, X., Zhang, G., Chen, K., & Wang, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.02.022 · Cited by 455
Fan, Y., Bao, Y., Ling, C., Chu, Y., Tan, X., & Yang, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.03.157 · Cited by 441
Rao, Z., Wang, Q., & Huang, C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.021 · Cited by 404
Jiaqiang, E., Han, D., Qiu, A., Zhu, H., Deng, Y., Chen, J., Zhao, X., Zuo, W., Wang, H., Chen, J., et al. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.115 · Cited by 404
Panchal, S., Khasow, R., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.010 · Cited by 397
Ultra-thin minichannel LCP for EV battery thermal management
Jin, L. W., Lee, P. S., Kong, X. X., Fan, Y., & Chou, S. K. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.07.013 · Cited by 393
Chen, J., Kang, S., E, J., Huang, Z., Wei, K., Zhang, B., Zhu, H., Deng, Y., Zhang, F., & Liao, G. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227228 · Cited by 392
Memory effect in a lithium-ion battery
Sasaki, T., Ukyo, Y., & Novák, P. (2013) · Nature Materials · doi:10.1038/nmat3623 · Cited by 377
Ye, Y., Saw, L. H., Shi, Y., & Tay, A. A. O. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.066 · Cited by 375
Electric vehicle battery thermal management system with thermoelectric cooling
Lyu, Y., Siddique, A. R. M., Majid, S. H., Biglarbegian, M., Gadsden, S. A., & Mahmud, S. (2019) · Energy Reports · doi:10.1016/j.egyr.2019.06.016 · Cited by 374
Zinth, V., von Lüders, C., Hofmann, M., Hattendorff, J., Buchberger, I., Erhard, S., Rebelo-Kornmeier, J., Jossen, A., & Gilles, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.168 · Cited by 361
Thermal modeling of cylindrical lithium ion battery during discharge cycle
Jeon, D. H., & Baek, S. M. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.04.013 · Cited by 352
Zhao, R., Gu, J., & Liu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.007 · Cited by 332
Experimental investigation on EV battery cooling and heating by heat pipes
Wang, Q., Jiang, B., Xue, Q. F., Sun, H. L., Li, B., Zou, H. M., & Yan, Y. Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.09.083 · Cited by 329
Rao, Z., Wang, S., & Zhang, G. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.07.009 · Cited by 322
Arora, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.020 · Cited by 315
A comparative study on battery thermal management using phase change material (PCM)
Verma, A., Shashidhara, S., & Rakshit, D. (2019) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2019.03.003 · Cited by 315
von Lüders, C., Zinth, V., Erhard, S. V., Osswald, P. J., Hofmann, M., Gilles, R., & Jossen, A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.032 · Cited by 311
Lai, Y., Wu, W., Chen, K., Wang, S., & Xin, C. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118581 · Cited by 309
Prevent thermal runaway of lithium-ion batteries with minichannel cooling
Xu, J., Lan, C., Qiao, Y., & Ma, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.08.151 · Cited by 308
Battery thermal management system for electric vehicle using heat pipes
Smith, J., Singh, R., Hinterberger, M., & Mochizuki, M. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2018.08.022 · Cited by 303
Kizilel, R., Lateef, A., Sabbah, R., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.04.050 · Cited by 301
Thermal management of the lithium-ion battery by the composite PCM-Fin structures
Sun, Z., Fan, R., Yan, F., Zhou, T., & Zheng, N. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118739 · Cited by 288
(2002) · Interlending & Document Supply · doi:10.1108/ilds.2002.12230aab.001 · Cited by 287
Capacity fade analysis of a lithium ion cell
Zhang, Q., & White, R. E. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.01.028 · Cited by 286
The solutions to electric vehicle air conditioning systems: A review
Zhang, Z., Wang, J., Feng, X., Chang, L., Chen, Y., & Wang, X. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.005 · Cited by 283
Lv, Y., Yang, X., Li, X., Zhang, G., Wang, Z., & Yang, C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.058 · Cited by 282
Greco, A., Cao, D., Jiang, X., & Yang, H. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.004 · Cited by 280
Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery
Tran, T.-H., Harmand, S., Desmet, B., & Filangi, S. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.11.048 · Cited by 279
Huang, Y., Mei, P., Lu, Y., Huang, R., Yu, X., Chen, Z., & Roskilly, A. P. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.04.033 · Cited by 277
Panchal, S., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.11.019 · Cited by 271
Structural optimization of lithium-ion battery pack with forced air cooling system
Xie, J., Ge, Z., Zang, M., & Wang, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.143 · Cited by 271
Zhao, J., Lv, P., & Rao, Z. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.11.017 · Cited by 270
Wu, W., Yang, X., Zhang, G., Ke, X., Wang, Z., Situ, W., Li, X., & Zhang, J. (2016) · Energy · doi:10.1016/j.energy.2016.07.119 · Cited by 266
Co-estimation of capacity and state-of-charge for lithium-ion batteries in electric vehicles
Li, X., Wang, Z., & Zhang, L. (2019) · Energy · doi:10.1016/j.energy.2019.02.147 · Cited by 264
Chen, K., Song, M., Wei, W., & Wang, S. (2017) · Energy · doi:10.1016/j.energy.2017.12.110 · Cited by 263
Wang, T., Tseng, K. J., & Zhao, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.033 · Cited by 259
Fathabadi, H. (2014) · Energy · doi:10.1016/j.energy.2014.04.046 · Cited by 258
Putra, N., Ariantara, B., & Pamungkas, R. A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.01.123 · Cited by 257
Alipanah, M., & Li, X. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.07.010 · Cited by 257
Simulation of passive thermal management system for lithium-ion battery packs
Mills, A., & Al-Hallaj, S. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.09.025 · Cited by 254
Chen, K., Song, M., Wei, W., & Wang, S. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.12.024 · Cited by 251
Development of a theoretically based thermal model for lithium ion battery pack
Zhu, C., Li, X., Song, L., & Xiang, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.035 · Cited by 238
Research on the heat dissipation performance of battery pack based on forced air cooling
Xu, X. M., & He, R. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.004 · Cited by 237
Self-citationAl-Zareer, M., Dincer, I., & Rosen, M. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.067 · Cited by 228
Hussain, A., Tso, C. Y., & Chao, C. Y. H. (2016) · Energy · doi:10.1016/j.energy.2016.09.008 · Cited by 227
Simulation of temperature distribution in cylindrical and prismatic lithium ion secondary batteries
Inui, Y., Kobayashi, Y., Watanabe, Y., Watase, Y., & Kitamura, Y. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2006.12.012 · Cited by 226
A review on two-phase ejector as an expansion device in vapor compression refrigeration cycle
Sumeru, K., Nasution, H., & Ani, F. N. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.04.058 · Cited by 226
Zhang, W., Qiu, J., Yin, X., & Wang, D. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114571 · Cited by 226
Thermal management optimization of a prismatic battery with shape-stabilized phase change material
Wu, W., Wu, W., & Wang, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.01.062 · Cited by 222
Malik, M., Dinçer, İ., Rosen, M. A., Mathew, M., & Fowler, M. W. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.029 · Cited by 221
Experimental performances of a battery thermal management system using a phase change material
Hémery, C.-V., Pra, F., Robin, J.-F., & Marty, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.147 · Cited by 220
Dan, D., Yao, C., Zhang, Y., Zhang, H., Zeng, Z., & Xu, X. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114183 · Cited by 219
Self-citationHong, S., Zhang, X., Chen, K., & Wang, S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.09.092 · Cited by 218
Self-citationZhang, Z., & Wei, K. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114660 · Cited by 218
Lu, Z., Yu, X., Wei, L., Qiu, Y., Zhang, L., Meng, X., & Jin, L. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.02.080 · Cited by 217
Xun, J., Liu, R., & Jiao, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.095 · Cited by 216
Reverse layered air flow for Li-ion battery thermal management
Na, X., Kang, H., Wang, T., & Wang, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.07.080 · Cited by 213
Enhancement of latent heat energy storage using embedded heat pipes
Robak, C. W., Bergman, T. L., & Faghri, A. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.03.038 · Cited by 210
Wang, J., Gan, Y., Liang, J., Tan, M., & Li, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.02.036 · Cited by 209
Huang, Y.-H., Cheng, W.-L., & Zhao, R. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.064 · Cited by 207
Numerical study on the thermal performance of a composite board in battery thermal management system
Yan, J., Wang, Q., Li, K., & Sun, J. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.05.187 · Cited by 202
Liquid cooling based on thermal silica plate for battery thermal management system
Wang, C., Zhang, G., Meng, L., Li, X., Situ, W., Lv, Y., & Rao, M. (2017) · International Journal of Energy Research · doi:10.1002/er.3801 · Cited by 202
Gan, Y., Wang, J., Liang, J., Huang, Z., & Hu, M. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114523 · Cited by 194
Tran, T.-H., Harmand, S., & Sahut, B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.130 · Cited by 191
Feng, X., Xu, C., He, X., Wang, L., Zhang, G., & Ouyang, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.003 · Cited by 185
Chen, K., Wang, S., Song, M., & Chen, L. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.060 · Cited by 182
Rao, Z., Huo, Y., Liu, X., & Zhang, G. (2015) · Journal of the Energy Institute · doi:10.1016/j.joei.2014.09.006 · Cited by 179
Experimental study on pulse self–heating of lithium–ion battery at low temperature
Qu, Z. G., Jiang, Z. Y., & Wang, Q. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.020 · Cited by 179
Solid-State Thermal Management for Lithium-Ion EV Batteries
Alaoui, C. (2013) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2214246 · Cited by 166
Ye, Y., Shi, Y., Saw, L. H., & Tay, A. A. O. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.09.052 · Cited by 162
Quantitative identification of emissions from abused prismatic Ni-rich lithium-ion batteries
Zhang, Y., Wang, H., Li, W., & Li, C. (2019) · eTransportation · doi:10.1016/j.etran.2019.100031 · Cited by 161
Self-citationExperimental and theoretical analysis of a method to predict thermal runaway in Li-ion cells
Shah, K., Chalise, D., & Jain, A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.133 · Cited by 155
Thermal modeling of full-size-scale cylindrical battery pack cooled by channeled liquid flow
Cao, W., Zhao, C., Wang, Y., Dong, T., & Jiang, F. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.04.137 · Cited by 152
Cen, J., Li, Z., & Jiang, F. (2018) · Energy Sustainable Development/Energy for sustainable development · doi:10.1016/j.esd.2018.05.005 · Cited by 150
Li, X., He, F., Zhang, G., Huang, Q., & Zhou, D. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.061 · Cited by 150
Farag, M., Sweity, H., Fleckenstein, M., & Habibi, S. R. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.031 · Cited by 149
Wei, A., Qu, J., Qiu, H., Wang, C., & Cao, G. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.021 · Cited by 148
Three-dimensional thermal modeling of a lithium-ion battery pack
Sun, H., Wang, X., Tossan, B., & Dixon, R. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.081 · Cited by 146
Xie, Y., He, X.-J., Hu, X.-S., Li, W., Zhang, Y., Liu, B., & Sun, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114455 · Cited by 144
Self-citationChoi, Y. S., & Kang, D. M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.120 · Cited by 142
Electrochemical–Thermal Model of Pouch-type Lithium-ion Batteries
Ghalkhani, M., Bahiraei, F., Nazri, G., & Saif, M. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.06.164 · Cited by 142
Liang, J., Gan, Y., Li, Y., et al. (2019) · Energy · doi:10.1016/j.energy.2019.116233 · Cited by 140
Modelling electro-thermal response of lithium-ion batteries from normal to abuse conditions
Ping, P., Wang, Q., Chung, Y. M., & Wen, J. X. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.073 · Cited by 138
Thermal characteristics of power battery pack with liquid-based thermal management
Liu, J., Li, H., Li, W., Shi, J., Wang, H., & Chen, J. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114421 · Cited by 138
2012 IEEE Energy Conversion Congress and Exposition (ECCE)
(2012) · doi:10.1109/ecce16988.2012 · Cited by 138
Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array (MHPA)
Ye, X., Zhao, Y., & Quan, Z. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.141 · Cited by 136
박성기, Jang, D. S., Lee, D., Hong, S. H., & Kim, Y. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.01.109 · Cited by 135
Zhao, X., Yin, Y., Hu, Y., & Choe, S.-Y. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.02.001 · Cited by 135
Wang, Q., He, Y., Shen, J.-N., Ma, Z., & Zhong, G. (2017) · Energy · doi:10.1016/j.energy.2017.07.035 · Cited by 134
Li, W., Peng, X., Xiao, M., Garg, A., & Gao, L. (2019) · International Journal of Energy Research · doi:10.1002/er.4518 · Cited by 133
Takami, N., Ise, K., Harada, Y., et al. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.06.059 · Cited by 132
Thermal Management of Densely-packed EV Battery with Forced Air Cooling Strategies
Zhao, L., Meng, X., Wei, L., Hu, W., Zhang, L. Y., & Jin, L. (2016) · Energy Procedia · doi:10.1016/j.egypro.2016.06.098 · Cited by 131
A Novel Thermal Management for Electric and Hybrid Vehicles
Alaoui, C., & Salameh, Z. M. (2005) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2004.842444 · Cited by 129
Worwood, D., Kellner, Q., Wojtala, M., Widanage, W. D., McGlen, R. J., Greenwood, D. G., & Marco, J. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.02.023 · Cited by 124
Active cooling based battery thermal management using composite phase change materials
Zhao, Y., Zou, B., Li, C. S., & Ding, Y. (2019) · Energy Procedia · doi:10.1016/j.egypro.2019.01.697 · Cited by 122
Jiaqiang, E., Xu, S., Deng, Y., Zhu, H., Zuo, W., Wang, H., Chen, J., Peng, Q., & Zhang, Z. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.09.048 · Cited by 121
Wang, S., Li, K., Tian, Y., Wang, J., Wu, Y., & Ji, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.02.061 · Cited by 120
Heat and mass transfer modeling and assessment of a new battery cooling system
Al‐Zareer, M., Dinçer, İ., & Rosen, M. A. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.157 · Cited by 118
Mohammed, A. H., Esmaeeli, R., Aliniagerdroudbari, H., et al. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114106 · Cited by 117
Experimental and numerical investigation of core cooling of Li-ion cells using heat pipes
Shah, K., McKee, C., Chalise, D., & Jain, A. (2016) · Energy · doi:10.1016/j.energy.2016.07.076 · Cited by 113
Amiribavandpour, P., Shen, W., Mu, D., & Kapoor, A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.022 · Cited by 105
A state-of-the-art review on hybrid heat pipe latent heat storage systems
Naghavi, M. S., Ong, K. S., Mehrali, M., Badruddin, I. A., & Metselaar, H. S. C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.08.044 · Cited by 103
Naghavi, M. S., Ong, K. S., Badruddin, I. A., Mehrali, M., Silakhori, M., & Metselaar, H. S. C. (2015) · Energy · doi:10.1016/j.energy.2015.08.100 · Cited by 97
Study on the thermal interaction and heat dissipation of cylindrical Lithium-Ion Battery cells
Huang, Y., Lu, Y., Huang, R. N., Chen, J., Chen, F., Liu, Z., Yu, X., & Roskilly, A. P. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.12.321 · Cited by 96
Mastali, M., Foreman, E., Modjtahedi, A., et al. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2018.03.004 · Cited by 96
Li, W., Chen, S., Peng, X., Xiao, M., Gao, L., Garg, A., & Bao, N. (2019) · Engineering · doi:10.1016/j.eng.2019.07.005 · Cited by 96
Wang, C., Zhang, G., Li, X., Huang, J., Wang, Z., Lv, Y., Meng, L., Situ, W., & Rao, M. (2017) · International Journal of Energy Research · doi:10.1002/er.3916 · Cited by 94
A parametric study for optimization of minichannel based battery thermal management system
An, Z., Shah, K., Jia, L., & Ma, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.02.088 · Cited by 88
Comparison of cooling plate configurations for automotive battery pack thermal management
Darcovich, K., MacNeil, D. D., Recoskie, S., Cadic, Q., & Ilinca, F. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.03.146 · Cited by 77
Cold temperature performance of phase change material based battery thermal management systems
Ghadbeigi, L., Day, B. C., Lundgren, K., & Sparks, T. D. (2018) · Energy Reports · doi:10.1016/j.egyr.2018.04.001 · Cited by 75
Saber, H. H., Al-Shehri, S. A., & Maref, W. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.04.028 · Cited by 73
Javani, N., Dinçer, İ., & Naterer, G. F. (2014) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4029053 · Cited by 58
Thermal management of a large prismatic battery pack based on reciprocating flow and active control
Wang, H., & Ma, L. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.07.060 · Cited by 58
Oca, L., Guillet, N., Tessard, R., & Iraola, U. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.02.033 · Cited by 58
Chen, J., Jiaqiang, E., Kang, S., Zhao, X., Zhu, H., Deng, Y., Peng, Q., & Zhang, Z. (2019) · Energy · doi:10.1016/j.energy.2019.115924 · Cited by 56
Huang, J., Qin, D., & Peng, Z. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.08.080 · Cited by 44
Liang, Z., Zhao, Y., Dong, Y., Kuang, Q., Lin, X., Liu, X., & Yan, D. (2015) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2015.03.013 · Cited by 42
Darcovich, K., MacNeil, D. D., Recoskie, S., & Kenney, B. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.01.094 · Cited by 42
Car air-conditioning considerations on hydrogen consumption in fuel cell and driving limitations
Pino, J., Marcos, D., Bordons, C., & Rosa, F. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.04.079 · Cited by 40
Heat‐pipe‐based thermal management and temperature characteristics of Li‐ion batteries
Yuan, W., Yan, Z., Tan, Z., Chen, W., & Tang, Y. Z. (2016) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.22566 · Cited by 37
Zhao, J., Qu, J., & Rao, Z. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.05.125 · Cited by 36
Thermal performance of pouch Lithium-ion battery module cooled by phase change materials
Bai, F., Chen, M., Song, W., Li, Y., Feng, Z., & Li, Y. (2019) · Energy Procedia · doi:10.1016/j.egypro.2019.01.891 · Cited by 36
Akhtar, M. S., Bui, P. T. M., Li, Z., Yang, O., Paul, B. J., Kim, S., Kim, J., & Rai, A. K. (2019) · Solid State Ionics · doi:10.1016/j.ssi.2019.03.010 · Cited by 35
A linear parameter-varying model for HEV/EV battery thermal modeling
Hu, X., Asgari, S., Lin, S., et al. (2012) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342616 · Cited by 33
Yu, F., Huang, G., & Xu, C. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.08.070 · Cited by 27
A simulation-based probabilistic framework for lithium-ion battery modelling
Rajan, A., Vijayaraghavan, V., Ooi, M. P., Garg, A., & Kuang, Y. C. (2017) · Measurement · doi:10.1016/j.measurement.2017.10.033 · Cited by 24
Li, Y., Chen, M., Bai, F., Song, W., & Feng, Z. (2019) · Energy Procedia · doi:10.1016/j.egypro.2019.02.013 · Cited by 6
Cited by
A review on recent progress, challenges and perspective of battery thermal management system
Lin, J., Liu, X., Li, S., Zhang, C., & Yang, S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120834 · Cited by 588
Akbarzadeh, M., Kalogiannis, T., Jaguemont, J., Jin, L., Behi, H., Karimi, D., Beheshti, H., Van Mierlo, J., & Berecibar, M. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117503 · Cited by 431
Akinlabi, A. A. H., & Solyali, D. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109815 · Cited by 428
Zhao, G., Wang, X., Negnevitsky, M., & Li, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119626 · Cited by 395
Developments in battery thermal management systems for electric vehicles: A technical review
Tete, P. R., Gupta, M. M., & Joshi, S. S. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102255 · Cited by 388
Metadata
- Authors
- Lu, M., Zhang, X., Ji, J., Xu, X., & Zhang, Y.
- Venue
- Journal of Energy Storage
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 27
- Pages
- 101155
- ISSN
- 2352-152X (ISSN-L)
- OpenAlex
- W2998560094
- Cited by
- 434
- References
- 162
- FWCI
- 15.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.