The DOI matches its Crossref record; 113 of the 113 references it cites were found in a registry or an index.
A state of art review and future viewpoint on advance cooling techniques for Lithium–ion battery system of electric vehicles
Abstract
Abstract Electric Vehicles (EVs) have emerged as most promising means of transport owing to the low operational costs, high speed, and energy-efficient battery technologies, where battery thermal management system (BTMS) is possibly the most crucial element of an EV. During the charging/discharging mode of EVs, a major focused area for the researcher is to maintain the optimal working temperature range of the batteries and reduce both the maximum temperature and temperature difference. Suitable and effective cooling methods can significantly reduce the adverse effect of the high surface temperature of battery cells and efficiently augments the battery thermal efficiency, improves the safety of EVs, and increase the service life. In this context, this work presents a detailed state of the art review of different BTMS technologies, including natural and forced air-cooling techniques, direct and indirect liquid cooling methods, and cooling by heat pipes. It is found that the air-cooled BTMS possesses advantageous features such as safe, consistent, and simple design, but the lower heat capacity and thermal efficiency of the air as a cooling medium restricts its application to a low capacity battery. This leads to employment of forced air-cooled BTMS under high charging/discharging rate, in which air flows through the channels inside the battery packs to provide the optimum cooling. Liquid-cooled BTMS is also emerging as one of the most promising cooling technologies, which requires attention to the sealing cover during the design stage to avoid leakages. The integration of metal plates with the mini channel can effectively improve the cooling performance, but the weight of the system is a major concern. Liquid metals, nanofluids, and boiling liquids are considered as the most prominent battery cooling methods owing to their higher thermal conductivity. The advancement in hybrid cooling using fins, nanofluids, PCM along with micro channels-based cooling will significantly improve the battery performance under high charging/discharging rate and attention should be given to compact design with a cheaper cost.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Mitigating Thermal Runaway of Lithium-Ion Batteries
Feng, X., Ren, D., He, X., & Ouyang, M. (2020) · Joule · doi:10.1016/j.joule.2020.02.010 · Cited by 1,735
Review on battery thermal management system for electric vehicles
Kim, J., Oh, J., & Lee, H. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.12.020 · Cited by 1,292
A critical review of battery thermal performance and liquid based battery thermal management
Wu, W., Wang, S., Wu, W., Chen, K., Hong, S., & Lai, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.051 · Cited by 1,214
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Battery thermal models for hybrid vehicle simulations
Pesaran, A. A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00200-8 · Cited by 1,116
A review on the state-of-the-art technologies of electric vehicle, its impacts and prospects
Yong, J. Y., Ramachandaramurthy, V. K., Tan, K. M., & Mithulananthan, N. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.130 · Cited by 1,081
(2010) · Cited by 909
Investigation of power battery thermal management by using mini-channel cold plate
Huo, Y., Rao, Z., Liu, X., & Zhao, J. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.015 · Cited by 712
Thermal analysis of lithium-ion batteries
Chen, S. C., Wan, C. C., & Wang, Y. Y. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.05.064 · Cited by 708
A review on battery thermal management in electric vehicle application
Xia, G., Cao, L., & Bi, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.046 · Cited by 641
A General Discussion of Li Ion Battery Safety
(2012) · Electrochemical Society Interface · doi:10.1149/2.f03122if · Cited by 592
Son, I. H., Hwan Park, J., Kwon, S., Park, S., Rümmeli, M. H., Bachmatiuk, A., Song, H. J., Ku, J., Choi, J. W., Choi, J.-M., et al. (2015) · Nature Communications · doi:10.1038/ncomms8393 · Cited by 564
Design optimization of electric vehicle battery cooling plates for thermal performance
Jarrett, A., & Kim, I. Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.090 · Cited by 560
Thermal Analysis of Lithium‐Ion Batteries
Chen, Y., & Evans, J. W. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1837095 · Cited by 545
Deng, Y., Feng, C., E, J., Zhu, H., Chen, J., Wen, M., & Yin, H. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.043 · Cited by 542
Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling
Saw, L. H., Ye, Y., Tay, A. A. O., Chong, W. T., Kuan, S. H., & Yew, M. C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.122 · Cited by 527
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Rao, Z., Wang, S., Wu, M., Lin, Z., & Li, F. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.08.014 · Cited by 486
Zhao, J., Rao, Z., & Li, Y. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.06.056 · Cited by 481
Capacity fade of Sony 18650 cells cycled at elevated temperatures
Ramadass, P., Haran, B., White, R., & Popov, B. N. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00474-3 · Cited by 450
Fan, Y., Bao, Y., Ling, C., Chu, Y., Tan, X., & Yang, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.03.157 · Cited by 441
Research progress on power battery cooling technology for electric vehicles
Lu, M., Zhang, X., Ji, J., Xu, X., & Zhang, Y. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101155 · Cited by 434
Electric vehicles batteries thermal management systems employing phase change materials
Ianniciello, L., Biwolé, P. H., & Achard, P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.071 · Cited by 426
Panchal, S., Khasow, R., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.010 · Cited by 397
Ultra-thin minichannel LCP for EV battery thermal management
Jin, L. W., Lee, P. S., Kong, X. X., Fan, Y., & Chou, S. K. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.07.013 · Cited by 393
Ye, Y., Saw, L. H., Shi, Y., & Tay, A. A. O. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.066 · Cited by 375
Heat dissipation design for lithium-ion batteries
Wu, M.-S., Liu, K. H., Wang, Y.-Y., & Wan, C.-C. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00048-4 · Cited by 373
Aqueous batteries as grid scale energy storage solutions
Posada, J. O. G., Rennie, A. J. R., Villar, S. P., Martins, V. L., Marinaccio, J., Barnes, A., Glover, C. F., Worsley, D. A., & Hall, P. J. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.02.024 · Cited by 372
Zhao, R., Zhang, S., Liu, J., & Gu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.001 · Cited by 343
Thermal management for high power lithium-ion battery by minichannel aluminum tubes
Lan, C., Xu, J., Qiao, Y., & Ma, Y. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.02.070 · Cited by 336
Failure propagation in multi-cell lithium ion batteries
Lamb, J., Orendorff, C. J., Steele, L. A. M., & Spangler, S. W. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.081 · Cited by 335
Differential scanning calorimetry material studies: implications for the safety of lithium-ion cells
Zhang, Z., Fouchard, D., & Rea, J. R. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02611-6 · Cited by 330
Experimental investigation on EV battery cooling and heating by heat pipes
Wang, Q., Jiang, B., Xue, Q. F., Sun, H. L., Li, B., Zou, H. M., & Yan, Y. Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.09.083 · Cited by 329
Madhusudana, C. V. (2014) · Mechanical Engineering Series · doi:10.1007/978-3-319-01276-6 · Cited by 323
Arora, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.020 · Cited by 315
Novel thermal management system using mist cooling for lithium-ion battery packs
Saw, L. H., Poon, H. M., Thiam, H. S., Cai, Z., Chong, W. T., Pambudi, N. A., & King, Y. J. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.042 · Cited by 314
Air and PCM cooling for battery thermal management considering battery cycle life
Chen, F., Huang, R., Wang, C., Yu, X., Liu, H., Wu, Q., Qian, K., & Bhagat, R. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115154 · Cited by 310
Self-citationMadhusudana, C. V. (1996) · Mechanical Engineering Series · doi:10.1007/978-1-4612-3978-9 · Cited by 304
Toxicity, a serious concern of thermal runaway from commercial Li-ion battery
Sun, J., Li, J., Zhou, T., Yang, K., Wei, S., Tang, N., Dang, N., Li, H., Qiu, X., & Chen, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.031 · Cited by 295
Thermal management of Li-ion battery with liquid metal
Yang, X.-H., Tan, S.-C., & Liu, J. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.03.054 · Cited by 285
Qin, P., Liao, M., Zhang, D., Liu, Y., Sun, J., & Wang, Q. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.05.084 · Cited by 284
A review of current automotive battery technology and future prospects
Budde-Meiwes, H., Drillkens, J., Lunz, B., Muennix, J., Rothgang, S., Kowal, J., & Sauer, D. U. (2013) · Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering · doi:10.1177/0954407013485567 · Cited by 277
Design a J-type air-based battery thermal management system through surrogate-based optimization
Liu, Y., & Zhang, J. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113426 · Cited by 277
The Reaction of Charged Cathodes with Nonaqueous Solvents and Electrolytes: I. Li[sub 0.5]CoO[sub 2]
MacNeil, D. D., & Dahn, J. R. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1407245 · Cited by 273
Structural optimization of lithium-ion battery pack with forced air cooling system
Xie, J., Ge, Z., Zang, M., & Wang, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.143 · Cited by 271
Battery thermal management by boiling heat-transfer
van Gils, R. W., Danilov, D., Notten, P. H. L., Speetjens, M. F. M., & Nijmeijer, H. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.12.006 · Cited by 266
Chen, K., Song, M., Wei, W., & Wang, S. (2017) · Energy · doi:10.1016/j.energy.2017.12.110 · Cited by 263
Wang, Y., & Wu, J. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112569 · Cited by 263
Energy efficient battery management
Chiasserini, C.-F., & Rao, R. R. (2001) · IEEE Journal on Selected Areas in Communications · doi:10.1109/49.932692 · Cited by 257
Putra, N., Ariantara, B., & Pamungkas, R. A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.01.123 · Cited by 257
Chen, K., Song, M., Wei, W., & Wang, S. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.12.024 · Cited by 251
Park, S., & Jung, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.039 · Cited by 243
Patil, M. S., Seo, J.-H., Panchal, S., Jee, S.-W., & Lee, M.-Y. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119728 · Cited by 233
High Energy Density Lithium Batteries: Materials, Engineering, Applications
(2010) · Wiley eBooks · doi:10.1002/9783527630011 · Cited by 231
Al-Zareer, M., Dincer, I., & Rosen, M. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.067 · Cited by 228
Jilte, R. D., Kumar, R., & Ahmadi, M. H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118131 · Cited by 220
Hong, S., Zhang, X., Chen, K., & Wang, S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.09.092 · Cited by 218
Reverse layered air flow for Li-ion battery thermal management
Na, X., Kang, H., Wang, T., & Wang, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.07.080 · Cited by 213
Heat generation in lithium-ion batteries with different nominal capacities and chemistries
Nazari, A., & Farhad, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.126 · Cited by 209
An, Z., Jia, L., Li, X., & Ding, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.02.053 · Cited by 208
Structure optimization of parallel air-cooled battery thermal management system
Chen, K., Wang, S., Song, M., & Chen, L. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.04.026 · Cited by 201
Liu, F., Lan, F., & Chen, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.108 · Cited by 195
Status and development of electric vehicle integrated thermal management from BTM to HVAC
Zhang, T., Gao, C., Gao, Q., Wang, G., Liu, M., Guo, Y., Xiao, C., & Yan, Y. Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.001 · Cited by 189
Huo, Y., & Rao, Z. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.07.128 · Cited by 167
Investigation of the thermal performance of axial-flow air cooling for the lithium-ion battery pack
Yang, T., Yang, N., Zhang, X., & Li, G. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2016.05.009 · Cited by 166
Experimental study of an OHP-cooled thermal management system for electric vehicle power battery
Rao, Z., Huo, Y., & Liu, X. (2014) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2014.03.017 · Cited by 162
Numerical investigation of thermal behaviors in lithium-ion battery stack discharge
Liu, R., Chen, J., Xun, J., Jiao, K., & Du, Q. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.07.024 · Cited by 160
Shahid, S., & Agelin‐Chaab, M. (2018) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2018.01.003 · Cited by 155
Thompson, S. M., Aspin, Z. S., Shamsaei, N., Elwany, A. H., & Bian, L. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.09.003 · Cited by 154
Peng, X., Ma, C., Garg, A., Bao, N., & Liao, X. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.03.042 · Cited by 154
Experimental investigation of a pulsating heat pipe for hybrid vehicle applications
Burban, G., Ayel, V., Alexandre, A., Lagonotte, P., Bertin, Y., & Romestant, C. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.05.037 · Cited by 153
Li, X., He, F., Zhang, G., Huang, Q., & Zhou, D. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.061 · Cited by 150
Wei, A., Qu, J., Qiu, H., Wang, C., & Cao, G. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.021 · Cited by 148
Self-citationExploring the efficacy of nanofluids for lithium-ion battery thermal management
Mondal, B., Lopez, C. F., & Mukherjee, P. P. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.04.130 · Cited by 146
A Comparative Study of Control-Oriented Thermal Models for Cylindrical Li-Ion Batteries
Hu, X., Liu, W., Lin, X., & Xie, Y. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2953606 · Cited by 139
A novel method for manufacturing sintered aluminium heat pipes (SAHP)
Ameli, M., Agnew, B., Leung, P., Ng, B., Sutcliffe, C. J., Singh, J. P. N., & McGlen, R. J. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.12.011 · Cited by 136
Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array (MHPA)
Ye, X., Zhao, Y., & Quan, Z. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.141 · Cited by 136
Jalkanen, K., Aho, T., & Vuorilehto, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.199 · Cited by 132
Al‐Zareer, M., Dinçer, İ., & Rosen, M. A. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.06.162 · Cited by 132
2006 IEEE Vehicle Power and Propulsion Conference
(2006) · doi:10.1109/vppc11578.2006 · Cited by 132
100 Wh Large size Li-ion batteries and safety tests
Kitoh, K., & Nemoto, H. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00125-1 · Cited by 131
Thermal Management of Densely-packed EV Battery with Forced Air Cooling Strategies
Zhao, L., Meng, X., Wei, L., Hu, W., Zhang, L. Y., & Jin, L. (2016) · Energy Procedia · doi:10.1016/j.egypro.2016.06.098 · Cited by 131
Recent advances in MEMS-based micro heat pipes
Qu, J., Wu, H., Cheng, P., Wang, Q., & Sun, Q. F. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.03.034 · Cited by 131
Thermal management of lithium-ion battery pack with liquid cooling
Saw, L. H., Tay, A. A. O., & Zhang, L. W. (2015) · Annual IEEE Semiconductor Thermal Measurement and Management Symposium/Proceedings · doi:10.1109/semi-therm.2015.7100176 · Cited by 128
Battery and battery management for hybrid electric vehicles: a review
Conte, F. V. (2006) · e+i Elektrotechnik und Informationstechnik · doi:10.1007/s00502-006-0383-6 · Cited by 127
Kang, D., Lee, P., Yoo, K., & Kim, J. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.101017 · Cited by 124
Heat transfer characteristics and LED heat sink application of aluminum plate oscillating heat pipes
Lin, Z., Wang, S., Huo, J., Hu, Y., Chen, J.-J., Zhang, W., & Lee, E. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.03.003 · Cited by 121
Thermal conductivity enhancement of ethylene glycol and water with graphene nanoplatelets
Selvam, C., Lal, D. M., & Harish, S. (2016) · Thermochimica Acta · doi:10.1016/j.tca.2016.09.002 · Cited by 121
Wang, S., Li, K., Tian, Y., Wang, J., Wu, Y., & Ji, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.02.061 · Cited by 120
Thermal analysis of high-power lithium-ion battery packs using flow network approach
Karimi, G., & Dehghan, A. R. (2014) · International Journal of Energy Research · doi:10.1002/er.3173 · Cited by 118
Heat and mass transfer modeling and assessment of a new battery cooling system
Al‐Zareer, M., Dinçer, İ., & Rosen, M. A. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.157 · Cited by 118
Investigation on a hydrogel based passive thermal management system for lithium ion batteries
Zhang, S., Zhao, R. L., Liu, J., & Gu, J. (2014) · Energy · doi:10.1016/j.energy.2014.03.012 · Cited by 111
Boiling Liquid Battery Cooling for Electric Vehicle
Hirano, H., Tajima, T., Hasegawa, T., SEKIGUCHI, T., & Uchino, M. (2014) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itec-ap.2014.6940931 · Cited by 111
Vita, A. D., Maheshwari, A., Destro, M., Santarelli, M., & Carello, M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.184 · Cited by 106
Liu, W., Jia, Z., Luo, Y., Xie, W., & Deng, T. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114272 · Cited by 98
Panchal, S., Gudlanarva, K., Tran, M., Fraser, R. A., & Fowler, M. W. (2020) · Energies · doi:10.3390/en13071638 · Cited by 94
Novel Mesoscale Electrothermal Modeling for Lithium-Ion Batteries
Xie, Y., Li, W., Hu, X., Zou, C., Feng, F., & Tang, X. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2927014 · Cited by 81
A rechargeable lithium-ion battery module for underwater use
Pendergast, D. R., DeMauro, E. P., Fletcher, M., Stimson, E., & Mollendorf, J. C. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.071 · Cited by 80
Ibrahim, O. T., Monroe, J. G., Thompson, S. M., Shamsaei, N., Bilheux, H., Elwany, A. H., & Bian, L. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.12.063 · Cited by 79
Wang, Y.-W., Jiang, J.-M., Chung, Y., et al. (2018) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-018-7646-4 · Cited by 76
Energy savings and increased electric vehicle range through improved battery thermal management
Smith, J., Hinterberger, M., Schneider, C., & Koehler, J. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.12.034 · Cited by 74
Local Heat Generation in a Single Stack Lithium Ion Battery Cell
Heubner, C., Schneider, M., Lämmel, C., & Michaelis, A. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.10.182 · Cited by 70
Damay, N., Forgez, C., Bichat, M., et al. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.083 · Cited by 56
Eddahech, A. (2013) · theses.fr (ABES) · doi:10.70675/af25f0e2z72f9z484fzb311za509a7b342a3 · Cited by 56
Murashko, K., Mityakov, A. V., Mityakov, V. Y., Sapozhnikov, S. Z., Jokiniemi, J. K., & Pyrhonen, J. J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.130 · Cited by 55
Panchal, S., Dinçer, İ., Agelin‐Chaab, M., Fraser, R., & Fowler, M. W. (2016) · Heat and Mass Transfer · doi:10.1007/s00231-016-1870-x · Cited by 50
Experimental investigation and modeling of lithium-ion battery cells and packs for electric vehicles
Panchal, S. (2016) · e-scholar@UOIT (University of Ontario Institute of Technology) · Cited by 49
Panchal, S. (2014) · UWSpace (University of Waterloo) · Cited by 46
Sidney, S., Mohan Lal, D., Selvam, C., & Harish, S. (2019) · Applied Sciences · doi:10.3390/app9061099 · Cited by 38
Zhao, J., Qu, J., & Rao, Z. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.05.125 · Cited by 36
Electric Vehicle Battery Thermal Issues and Thermal Management Techniques (Presentation)
Rugh, J. P., Pesaran, A. A., & Smith, K. A. (2013) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 9
Cited by
Kumar, R. R., Bharatiraja, C., Udhayakumar, K., Devakirubakaran, S., Sekar, K. S., & Mihet-Popa, L. (2023) · IEEE Access · doi:10.1109/access.2023.3318121 · Cited by 471
Zhao, G., Wang, X., Negnevitsky, M., & Li, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119626 · Cited by 395
Wang, Y., Zhang, X., & Chen, Z. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.118832 · Cited by 283
Sharma, D. K., & Prabhakar, A. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102885 · Cited by 278
A state-of-the art review on advancing battery thermal management systems for fast-charging
Kumar Thakur, A., Sathyamurthy, R., Velraj, R., Saidur, R., Pandey, A. K., Ma, Z., Singh, P., Hazra, S. K., Wafa Sharshir, S., Prabakaran, R., et al. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120303 · Cited by 263
Self-citation
Metadata
- Authors
- Thakur, A. K., Prabakaran, R., Elkadeem, M. R., Sharshir, S. W., Arıcı, M., Wang, C., Zhao, W., Hwang, J.-Y., & Saidur, R.
- Venue
- Journal of Energy Storage
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 32
- Pages
- 101771
- ISSN
- 2352-152X (ISSN-L)
- OpenAlex
- W3089669456
- Cited by
- 287
- References
- 113
- FWCI
- 13.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.