The DOI matches its Crossref record; 87 of the 87 references it cites were found in a registry or an index.
Industry 4.0 and the human factor – A systems framework and analysis methodology for successful development
Open accessAbstract
The fourth industrial revolution we currently witness changes the role of humans in operations systems. Although automation and assistance technologies are becoming more prevalent in production and logistics, there is consensus that humans will remain an essential part of operations systems. Nevertheless, human factors are still underrepresented in this research stream resulting in an important research and application gap. This article first exposes this gap by presenting the results of a focused content analysis of earlier research on Industry 4.0. To contribute to closing this gap, it then develops a conceptual framework that integrates several key concepts from the human factors engineering discipline that are important in the context of Industry 4.0 and that should thus be considered in future research in this area. The framework can be used in research and development to systematically consider human factors in Industry 4.0 designs and implementations. This enables the analysis of changing demands for humans in Industry 4.0 environments and contributes towards a successful digital transformation that avoid the pitfalls of innovation performed without attention to human factors. The paper concludes with highlighting future research directions on human factors in Industry 4.0 as well as managerial implications for successful applications in practice.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Content Analysis: An Introduction to its Methodology.
Shelley, M., & Krippendorff, K. (1984) · Journal of the American Statistical Association · doi:10.2307/2288384 · Cited by 24,312
The Practice of Social Research
Neustadtl, A., & Babbie, E. (1989) · Teaching Sociology · doi:10.2307/1318433 · Cited by 14,398
The Content Analysis Guidebook
Neuendorf, K. A. (2017) · doi:10.4135/9781071802878 · Cited by 9,286
Healthy work: stress, productivity, and the reconstruction of working life
(1990) · Choice Reviews Online · doi:10.5860/choice.28-0381 · Cited by 8,220
The Practice of Social Research.
Williams, D. G., & Babbie, E. R. (1976) · Contemporary Sociology · doi:10.2307/2062956 · Cited by 7,194
Lasi, H., Fettke, P., Kemper, H.-G., Feld, T., & Hoffmann, M. (2014) · Business & Information Systems Engineering · doi:10.1007/s12599-014-0334-4 · Cited by 4,276
Industry 4.0: state of the art and future trends
Xu, L. D., Xu, E. L., & Li, L. (2018) · International Journal of Production Research · doi:10.1080/00207543.2018.1444806 · Cited by 3,221
Industry 4.0: A survey on technologies, applications and open research issues
Lu, Y. (2017) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2017.04.005 · Cited by 3,012
Risk management in a dynamic society: a modelling problem
Rasmussen, J. (1997) · Safety Science · doi:10.1016/s0925-7535(97)00052-0 · Cited by 2,994
Industry 4.0 technologies: Implementation patterns in manufacturing companies
Frank, A. G., Dalenogare, L. S., & Ayala, N. F. (2019) · International Journal of Production Economics · doi:10.1016/j.ijpe.2019.01.004 · Cited by 2,958
Digital Transformation Strategies
Matt, C., Hess, T., & Benlian, A. (2015) · Business & Information Systems Engineering · doi:10.1007/s12599-015-0401-5 · Cited by 2,899
Past, present and future of Industry 4.0—A systematic literature review and research agenda proposal
Liao, Y., Deschamps, F., Loures, E. D. F. R., & Ramos, L. F. P. (2017) · International Journal of Production Research · doi:10.1080/00207543.2017.1308576 · Cited by 2,036
Industry 4.0 and the current status as well as future prospects on logistics
Hofmann, E., & Rüsch, M. (2017) · Computers in Industry · doi:10.1016/j.compind.2017.04.002 · Cited by 1,841
Wang, G., Gunasekaran, A., Ngai, E. W. T., & Papadopoulos, T. (2016) · International Journal of Production Economics · doi:10.1016/j.ijpe.2016.03.014 · Cited by 1,545
The Future of Resource-Based Theory: Revitalization or Decline?
Barney, J. B., Ketchen, D. J., & Wright, M. (2011) · Journal of Management · doi:10.1177/0149206310391805 · Cited by 1,525
Industry 4.0 technologies assessment: A sustainability perspective
Bai, C., Dallasega, P., Orzes, G., & Sarkis, J. (2020) · International Journal of Production Economics · doi:10.1016/j.ijpe.2020.107776 · Cited by 1,417
(1959) · Cited by 1,379
The Principles of Sociotechnical Design
Cherns, A. (1976) · Human Relations · doi:10.1177/001872677602900806 · Cited by 1,063
Psychosocial factors at work and musculoskeletal disorders
Kompier, M. A., & van der Beek, A. J. (2008) · Scandinavian Journal of Work, Environment & Health · doi:10.5271/sjweh.1281 · Cited by 1,063
Psychosocial factors at work and musculoskeletal disease.
Bongers, P. M., de Winter, C. R., Kompier, M. A., & Hildebrandt, V. H. (1993) · Scandinavian Journal of Work, Environment & Health · doi:10.5271/sjweh.1470 · Cited by 955
Sociotechnical principles for system design
Clegg, C. W. (2000) · Applied Ergonomics · doi:10.1016/s0003-6870(00)00009-0 · Cited by 826
Logistics 4.0: a systematic review towards a new logistics system
Winkelhaus, S., & Grosse, E. H. (2020) · International Journal of Production Research · doi:10.1080/00207543.2019.1612964 · Cited by 797
Self-citationPsychosocial work environment and stress-related disorders, a systematic review
Nieuwenhuijsen, K., Bruinvels, D., & Frings-Dresen, M. (2010) · Occupational Medicine · doi:10.1093/occmed/kqq081 · Cited by 696
The Third Version of the Copenhagen Psychosocial Questionnaire
Burr, H., Berthelsen, H., Moncada, S., Nübling, M., Dupret, E., Demiral, Y., Oudyk, J., Kristensen, T. S., Llorens, C., Navarro, A., et al. (2019) · Safety and Health at Work · doi:10.1016/j.shaw.2019.10.002 · Cited by 519
Social Issues and Management: Our Lost Cause Found
Walsh, J. (2003) · Journal of Management · doi:10.1016/s0149-2063(03)00082-5 · Cited by 509
The smart factory as a key construct of industry 4.0: A systematic literature review
Osterrieder, P., Budde, L., & Friedli, T. (2020) · International Journal of Production Economics · doi:10.1016/j.ijpe.2019.08.011 · Cited by 498
The Relation between Work-related Psychosocial Factors and the Development of Depression
Netterstrom, B., Conrad, N., Bech, P., Fink, P., Olsen, O., Rugulies, R., & Stansfeld, S. (2008) · Epidemiologic Reviews · doi:10.1093/epirev/mxn004 · Cited by 467
On the Interface Between Operations and Human Resources Management
Boudreau, J., Hopp, W., McClain, J. O., & Thomas, L. J. (2003) · Manufacturing & Service Operations Management · doi:10.1287/msom.5.3.179.16032 · Cited by 451
Occupational health and safety in the industry 4.0 era: A cause for major concern?
Badri, A., Boudreau-Trudel, B., & Souissi, A. S. (2018) · Safety Science · doi:10.1016/j.ssci.2018.06.012 · Cited by 443
Ergonomics contributions to company strategies
Dul, J., & Neumann, W. P. (2009) · Applied Ergonomics · doi:10.1016/j.apergo.2008.07.001 · Cited by 431
Self-citationIncorporating human factors in order picking planning models: framework and research opportunities
Grosse, E. H., Glock, C. H., Jaber, M. Y., & Neumann, W. P. (2015) · International Journal of Production Research · doi:10.1080/00207543.2014.919424 · Cited by 373
Self-citationDavid, R., Stahre, J., Wuest, T., Noran, O. S., Bernus, P., Berglund, Å. F., & Gorecky, D. (2016) · Chalmers Publication Library (Chalmers University of Technology) · Cited by 362
Lean, six sigma and lean sigma: fads or real process improvement methods?
Näslund, D. (2008) · Business Process Management Journal · doi:10.1108/14637150810876634 · Cited by 358
Empowering and engaging industrial workers with Operator 4.0 solutions
Kaasinen, E., Schmalfuß, F., Özturk, C., Aromaa, S., Boubekeur, M., Heilala, J., Heikkilä, P., Kuula, T., Liinasuo, M., Mach, S., et al. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.01.052 · Cited by 356
Assembly system design in the Industry 4.0 era: a general framework
Bortolini, M., Ferrari, E., Gamberi, M., Pilati, F., & Faccio, M. (2017) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2017.08.1121 · Cited by 315
Human factors in production and logistics systems of the future
Sgarbossa, F., Grosse, E. H., Neumann, W. P., Battini, D., & Glock, C. H. (2020) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2020.04.007 · Cited by 313
Self-citationCurrent research and future perspectives on human factors and ergonomics in Industry 4.0
Kadir, B. A., Broberg, O., & Conceição, C. S. D. (2019) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.106004 · Cited by 311
Human factors in order picking: a content analysis of the literature
Grosse, E. H., Glock, C. H., & Neumann, W. P. (2017) · International Journal of Production Research · doi:10.1080/00207543.2016.1186296 · Cited by 301
Self-citationBiomechanical and psychosocial risk factors for low back pain at work
(2001) · American Journal of Public Health · doi:10.2105/ajph.91.7.1069 · Cited by 300
Identifying influential attributes in freight route/mode choice decisions: a content analysis
Cullinane, K., & Toy, N. (2000) · Transportation Research Part E: Logistics and Transportation Review · doi:10.1016/s1366-5545(99)00016-2 · Cited by 300
A content analysis of research approaches in logistics research
Spens, K. M., & Kovács, G. (2006) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/09600030610676259 · Cited by 299
Fantini, P., Pinzone, M., & Taisch, M. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.01.025 · Cited by 298
Human factors: spanning the gap between OM and HRM
Patrick Neumann, W., & Dul, J. (2010) · International Journal of Operations & Production Management · doi:10.1108/01443571011075056 · Cited by 250
Creating sustainable work systems : emerging perspectives and practice
Docherty, P., Forslin, J., & Shani, A. B. R. (2002) · Routledge eBooks · Cited by 229
Enabling Technologies for Operator 4.0: A Survey
Ruppert, T., Jaskó, S., Holczinger, T., & Abonyi, J. (2018) · Applied Sciences · doi:10.3390/app8091650 · Cited by 228
Stachová, K., Papula, J., Stacho, Z., & Kohnová, L. (2019) · Sustainability · doi:10.3390/su11020345 · Cited by 203
General Systems Theory: Ideas and Applications
Skyttner, L. (2001) · WORLD SCIENTIFIC eBooks · doi:10.1142/4307 · Cited by 193
Shamim, S., Cang, S., Yu, H., & Li, Y. (2017) · Energies · doi:10.3390/en10040499 · Cited by 192
Incorporating human factors in order picking planning models: framework and research opportunities
Grosse, E. H., Glock, C. H., Jaber, M. Y., & Neumann, P. (2015) · RePEc: Research Papers in Economics · doi:10.1080/00207543.2014.919424#.vhhcfmme98e · Cited by 189
Self-citationAN INVESTIGATION OF INDUSTRY 4.0 SKILLS REQUIREMENTS
Maisiri, W., Darwish, H., & van Dyk, L. (2019) · South African Journal of Industrial Engineering · doi:10.7166/30-3-2230 · Cited by 169
Pinzone, M., Albè, F., Orlandelli, D., Barletta, I., Berlin, C., Johansson, B., & Taisch, M. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.03.028 · Cited by 168
The paradigm that changed the work place
Eijnatten, V. F. F. (1993) · TU/e Research Portal · Cited by 164
Smart and cognitive solutions for Operator 4.0: Laboratory H-CPPS case studies
Zolotová, I., Papcun, P., Kajáti, E., Miškuf, M., & Mocnej, J. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.10.032 · Cited by 162
Production quality and human factors engineering: A systematic review and theoretical framework
Kolus, A., Wells, R., & Neumann, P. (2018) · Applied Ergonomics · doi:10.1016/j.apergo.2018.05.010 · Cited by 160
Goggins, R. W., Spielholz, P., & Nothstein, G. L. (2008) · Journal of Safety Research · doi:10.1016/j.jsr.2007.12.006 · Cited by 159
Integration of 3D Printing and Industry 4.0 into Engineering Teaching
Chong, S., Pan, G., Chin, J. K., Show, P. L., Yang, T. C. ‐., & Huang, C. (2018) · Sustainability · doi:10.3390/su10113960 · Cited by 150
Visual computing technologies to support the Operator 4.0
Segura, Á., Diez, H. V., Barandiarán, Í., Arbelaiz, A., Álvarez, H., Simões, B., Posada, J., García‐Alonso, A., & Ugarte, R. J. (2018) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.11.060 · Cited by 142
Neumann, P., Winkel, J., Medbo, L., Magneberg, R., & Mathiassen, S. E. (2006) · International Journal of Operations & Production Management · doi:10.1108/01443570610678666 · Cited by 138
Woo, D. M., & Vicente, K. J. (2003) · Reliability Engineering & System Safety · doi:10.1016/s0951-8320(03)00052-8 · Cited by 137
Neumann, P., Kihlberg, S., Medbo, P., Mathiassen, S. E., & Winkel, J. (2002) · International Journal of Production Research · doi:10.1080/00207540210148862 · Cited by 135
Human factors in a dynamic information society: where are we heading?
Rasmussen, J. (2000) · Ergonomics · doi:10.1080/001401300409071 · Cited by 124
Ergonomics action research II: a framework for integrating HF into work system design
Neumann, P., & Village, J. L. (2012) · Ergonomics · doi:10.1080/00140139.2012.706714 · Cited by 103
Integrating ergonomics into the product development process
Broberg, O. (1997) · International Journal of Industrial Ergonomics · doi:10.1016/s0169-8141(96)00041-8 · Cited by 103
Sackey, S. M., Bester, A., & Adams, D. Q. (2017) · The South African Journal of Industrial Engineering · doi:10.7166/28-1-1584 · Cited by 103
Forming a cognitive automation strategy for Operator 4.0 in complex assembly
Mattsson, S., Fast–Berglund, Å., Li, D., & Thorvald, P. (2018) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.08.011 · Cited by 96
Integrating ergonomics into engineering: Empirical evidence and implications for the ergonomists
Broberg, O. (2007) · Human Factors and Ergonomics in Manufacturing & Service Industries · doi:10.1002/hfm.20081 · Cited by 95
Digitalizing Occupational Health, Safety and Productivity for the Operator 4.0
Romero, D., Mattsson, S., Fast–Berglund, Å., Wuest, T., Gorecky, D., & Stahre, J. (2018) · IFIP advances in information and communication technology · doi:10.1007/978-3-319-99707-0_59 · Cited by 94
Integrating ergonomics into production system development – The Volvo Powertrain case
Neumann, P., Ekman, M., & Winkel, J. (2008) · Applied Ergonomics · doi:10.1016/j.apergo.2008.09.010 · Cited by 93
Work Environment and the Bottom Line: Survey of Tools Relating Work Environment to Business Results
Rose, L. M., Orrenius, U., & Neumann, W. P. (2011) · Human Factors and Ergonomics in Manufacturing & Service Industries · doi:10.1002/hfm.20324 · Cited by 87
Self-citationDoes Ergonomics Improve Product Quality and Reduce Costs? A Review Article
Zare, M., Croq, M., Hossein‐Arabi, F., Brunet, R., & Roquelaure, Y. (2016) · Human Factors and Ergonomics in Manufacturing & Service Industries · doi:10.1002/hfm.20623 · Cited by 79
A participant-observer study of ergonomics in engineering design:
Burns, C. M., & Vicente, K. J. (2000) · Applied Ergonomics · doi:10.1016/s0003-6870(99)00017-4 · Cited by 77
Amiri, S., & Behnezhad, S. (2020) · Public Health · doi:10.1016/j.puhe.2019.11.023 · Cited by 72
Taylor, M. P., Boxall, P., Chen, J. J. J., Xu, X. W., Liew, A., & Adeniji, A. (2018) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.10.047 · Cited by 71
Longo, F., Nicoletti, L., & Padovano, A. (2018) · Computers in Industry · doi:10.1016/j.compind.2018.12.003 · Cited by 67
Major, M.-È., & Vézina, N. (2015) · International Journal of Industrial Ergonomics · doi:10.1016/j.ergon.2015.05.003 · Cited by 61
Village, J. L., Searcy, C., Salustri, F. A., & Neumann, P. (2015) · Ergonomics · doi:10.1080/00140139.2015.1022232 · Cited by 56
Ergonomists’ and Engineers’ Views on the Utility of Virtual Human Factors Tools
Pérez, J. D. R., & Neumann, P. (2015) · Human Factors and Ergonomics in Manufacturing & Service Industries · doi:10.1002/hfm.20541 · Cited by 48
Machine scheduling in production: A content analysis
Abedinnia, H., Glock, C. H., & Schneider, M. (2017) · Applied Mathematical Modelling · doi:10.1016/j.apm.2017.05.016 · Cited by 43
Self-citationInnovation and employee injury risk in automotive disassembly operations
Neumann, P., Winkel, J., Palmerud, G., & Forsman, M. (2018) · International Journal of Production Research · doi:10.1080/00207543.2018.1432910 · Cited by 35
Solution Building Versus Problem Convincing: Ergonomists Report on Conducting Workplace Assessments
Wells, R. P., Neumann, P., Nagdee, T., et al. (2012) · IIE Transactions on Occupational Ergonomics and Human Factors · doi:10.1080/21577323.2012.708699 · Cited by 33
Village, J. L., Greig, M. A., Salustri, F. A., Zolfaghari, S., & Neumann, P. (2014) · Ergonomics · doi:10.1080/00140139.2014.938128 · Cited by 32
Palmerud, G., Forsman, M., Neumann, P., & Winkel, J. (2012) · Applied Ergonomics · doi:10.1016/j.apergo.2012.04.001 · Cited by 30
Letellier, M.-C., Duchaine, C., Aubé, K., Talbot, D. C., Mantha-Bélisle, M.-M., Sultan‐Taïeb, H., St‐Hilaire, F., Biron, C., Vézina, M., & Brisson, C. (2018) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph15030426 · Cited by 30
Sobhani, A., Wahab, M. I. M., & Neumann, P. W. (2016) · IIE Transactions on Occupational Ergonomics and Human Factors · doi:10.1080/21577323.2016.1178190 · Cited by 23
Taouk, Y., LaMontagne, A. D., Spittal, M. J., & Milner, A. J. (2020) · Occupational and Environmental Medicine · doi:10.1136/oemed-2019-106001 · Cited by 7
Ett produktionssystem under förändring : ergonomisk och teknisk utvärdering
Kihlberg, S., Franzon, H., Fröberg, J., Hägg, G. M., Hanse, J. J., Kjellberg, A., Mathiassen, S. E., Medbo, P., Neumann, P., & Winkel, J. (2005) · Gothenburg University Publications Electronic Archive (Gothenburg University) · Cited by 3
Cited by
Understanding the adoption of Industry 4.0 technologies in improving environmental sustainability
Javaid, M., Haleem, A., Singh, R. P., Suman, R., & Gonzalez, E. S. (2022) · Sustainable Operations and Computers · doi:10.1016/j.susoc.2022.01.008 · Cited by 859
Disruptive Technologies and Operations Management in the Industry 4.0 Era and Beyond
Choi, T., Kumar, S., Yue, X., & Chan, H. (2022) · Production and Operations Management · doi:10.1111/poms.13622 · Cited by 655
Artificial Intelligence Applications for Industry 4.0: A Literature-Based Study
Javaid, M., Haleem, A., Singh, R. P., & Suman, R. (2022) · Journal of Industrial Integration and Management · doi:10.1142/s2424862221300040 · Cited by 578
Substantial capabilities of robotics in enhancing industry 4.0 implementation
Javaid, M., Haleem, A., Singh, R. P., & Suman, R. (2021) · Cognitive Robotics · doi:10.1016/j.cogr.2021.06.001 · Cited by 563
On Predictive Maintenance in Industry 4.0: Overview, Models, and Challenges
Achouch, M., Dimitrova, M., Ziane, K., Sattarpanah Karganroudi, S., Dhouib, R., Ibrahim, H., & Adda, M. (2022) · Applied Sciences · doi:10.3390/app12168081 · Cited by 528
Metadata
- Authors
- Neumann, W. P., Winkelhaus, S., Grosse, E. H., & Glock, C. H.
- Venue
- International Journal of Production Economics
- Publisher
- Elsevier BV
- Published
- 2021-03
- Volume
- 233
- Pages
- 107992
- ISSN
- 0925-5273 (ISSN-L)
- OpenAlex
- W3106795364
- Cited by
- 583
- References
- 87
- FWCI
- 47.15
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.