The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
Open accessAbstract
The present work shows that optimization of mechanical properties via heat treatment of parts produced by Selective Laser Melting (SLM) is profoundly different compared to conventionally processed Ti6Al4V. In order to obtain optimal mechanical properties, specific treatments are necessary due to the specific microstructure resulting from the SLM process. SLM is an additive manufacturing technique through which components are built by selectively melting powder layers with a focused laser beam. The process is characterized by short laser-powder interaction times and localized high heat input, which leads to steep thermal gradients, rapid solidification and fast cooling. In this research, the effect of several heat treatments on the microstructure and mechanical properties of Ti6Al4V processed by SLM is studied. A comparison is made with the effect of these treatments on hot forged and subsequently mill annealed Ti6Al4V with an original equiaxed microstructure. For SLM produced parts, the original martensite α′ phase is converted to a lamellar mixture of α and β for heat treating temperatures below the β-transus (995 °C), but features of the original microstructure are maintained. Treated above the β-transus, extensive grain growth occurs and large β grains are formed which transform to lamellar α + β upon cooling. Post treating at 850 °C for 2 h, followed by furnace cooling increased the ductility of SLM parts to 12.84 ± 1.36%, compared to 7.36 ± 1.32% for as-built parts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Self-citationOndracek, G. (1972) · Journal of Nuclear Materials · doi:10.1016/0022-3115(72)90033-5 · Cited by 2,641
Materials Properties Handbook: Titanium Alloys
Boyer, R. R., Welsch, G. E., & Collings, E. W. (1994) · Medical Entomology and Zoology · Cited by 2,637
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Self-citationInfluence of processing on microstructure and mechanical properties of (α+β) titanium alloys
Lütjering, G. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00778-8 · Cited by 1,461
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Self-citationVilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Phase transformations during cooling in α+β titanium alloys
Ahmed, T., & Rack, H. J. (1998) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00802-2 · Cited by 1,224
Murr, L. E., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Rodela, A., Martinez, E. Y., Hernandez, D. H., Martinez, E., Medina, F., & Wicker, R. B. (2009) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2008.05.004 · Cited by 997
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Self-citation
Cited by
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Zhang, L., & Chen, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801215 · Cited by 1,100
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Self-citationEffect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
Simonelli, M., Tse, Y. Y., & Tuck, C. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.07.086 · Cited by 1,010
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Mower, T. M., & Long, M. J. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.068 · Cited by 1,001
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Defect formation mechanisms in selective laser melting: a review
Zhang, B., Li, Y., & Bai, Q. (2017) · Chinese Journal of Mechanical Engineering · doi:10.1007/s10033-017-0121-5 · Cited by 924
Gorsse, S., Hutchinson, C., Gouné, M., & Banerjee, R. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1361305 · Cited by 920
Jia, Q., & Gu, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.171 · Cited by 905
Additive manufacturing: Challenges, trends, and applications
Abdulhameed, O., Al-Ahmari, A., Ameen, W., & Mian, S. H. (2019) · Advances in Mechanical Engineering · doi:10.1177/1687814018822880 · Cited by 861
Qiu, C., Adkins, N. J. E., & Attallah, M. M. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.04.099 · Cited by 821
Kasperovich, G., Haubrich, J., Gussone, J., & Requena, G. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.070 · Cited by 818
Prashanth, K. G., Scudino, S., Klauss, H. J., Surreddi, K. B., Löber, L., Wang, Z., Chaubey, A. K., Kühn, U., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.023 · Cited by 803
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Kasperovich, G., & Hausmann, J. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.01.025 · Cited by 735
Zhang, L., & Attar, H. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201500419 · Cited by 721
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Dynamics of pore formation during laser powder bed fusion additive manufacturing
Martin, A. A., Calta, N. P., Khairallah, S. A., Wang, J., Depond, P. J., Fong, A. Y., Thampy, V., Guss, G. M., Kiss, A. M., Stone, K. H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10009-2 · Cited by 711
Residual Stress in Metal Additive Manufacturing
Li, C., Liu, Z. Y., Fang, X. Y., & Guo, Y. B. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.05.039 · Cited by 708
Xu, W., Lui, E. W., Pateras, A., Qian, M., & Brandt, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.027 · Cited by 687
Zhao, X., Li, S., Zhang, M., Liu, Y., Sercombe, T. B., Wang, S., Hao, Y., Yang, R., & Murr, L. E. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.135 · Cited by 673
Thijs, L., Montero Sistiaga, M. L., Wauthle, R., Xie, Q., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.036 · Cited by 672
Self-citationOn the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
Riemer, A., Leuders, S., Thöne, M., Richard, H. A., Tröster, T., & Niendorf, T. (2014) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2014.03.008 · Cited by 669
Sun, Z., Tan, X., Tor, S. B., & Chua, C. K. (2018) · NPG Asia Materials · doi:10.1038/s41427-018-0018-5 · Cited by 627
Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice
Oliveira, J. P., Santos, T. G., & Miranda, R. M. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100590 · Cited by 617
Spierings, A. B., Herres, N., & Levy, G. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111124770 · Cited by 614
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Laser based additive manufacturing in industry and academia
Schmidt, M., Merklein, M., Bourell, D., Dimitrov, D., Hausotte, T., Wegener, K., Overmeyer, L., Vollertsen, F., & Levy, G. N. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.011 · Cited by 602
Yu, W. H., Sing, S. L., Chua, C. K., Kuo, C. N., & Tian, X. L. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.04.006 · Cited by 586
Metal additive manufacturing in the commercial aviation industry: A review
Gisario, A., Kazarian, M., Martina, F., & Mehrpouya, M. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.08.005 · Cited by 574
Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution
Dai, N., Zhang, L.-C., Zhang, J., Chen, Q., & Wu, M. (2016) · Corrosion Science · doi:10.1016/j.corsci.2015.10.041 · Cited by 570
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.01.018 · Cited by 553
Self-citationHeat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Yadroitsev, I., Krakhmalev, P., & Yadroitsava, I. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.08.183 · Cited by 515
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Wauthle, R., Vrancken, B., Beynaerts, B., Jorissen, K., Schrooten, J., Kruth, J.-P., & Van Humbeeck, J. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.12.008 · Cited by 463
Self-citationKlocke, F., Klink, A., Veselovac, D., Aspinwall, D. K., Soo, S. L., Schmidt, M., Schilp, J., Levy, G., & Kruth, J.-P. (2014) · CIRP Annals · doi:10.1016/j.cirp.2014.05.004 · Cited by 417
“Further process monitoring approaches are detailed in several other publications [27,40].”
Self-citationAdditive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential
Goh, G. D., Agarwala, S., Goh, G. L., Dikshit, V., Sing, S. L., & Yeong, W. Y. (2017) · Aerospace Science and Technology · doi:10.1016/j.ast.2016.12.019 · Cited by 413
Tan, J. H., Wong, W. L. E., & Dalgarno, K. W. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.011 · Cited by 407
AlMangour, B., & Yang, J.-M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.08.037 · Cited by 389
Current status and future directions of fused filament fabrication
Singh, S., Singh, G., Prakash, C., & Ramakrishna, S. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.049 · Cited by 385
Selective laser melting of Ti6Al4V alloy: Process parameters, defects and post-treatments
Singla, A. K., Banerjee, M., Sharma, A., Singh, J., Bansal, A., Gupta, M. K., Khanna, N., Shahi, A. S., & Goyal, D. K. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.01.009 · Cited by 383
Metal additive manufacturing: Technology, metallurgy and modelling
Cooke, S., Ahmadi, K., Willerth, S., & Herring, R. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.07.025 · Cited by 378
Fracture and fatigue in additively manufactured metals
Becker, T. H., Kumar, P., & Ramamurty, U. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.117240 · Cited by 377
Review on field assisted metal additive manufacturing
Tan, C., Li, R., Su, J., Du, D., Du, Y., Attard, B., Chew, Y., Zhang, H., Lavernia, E. J., Fautrelle, Y., et al. (2023) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2023.104032 · Cited by 377
Bagehorn, S., Wehr, J., & Maier, H. J. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.05.008 · Cited by 371
Azarniya, A., Colera, X. G., Mirzaali, M. J., Sovizi, S., Bartolomeu, F., St Weglowski, M., Wits, W. W., Yap, C. Y., Ahn, J., Miranda, G., et al. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.04.255 · Cited by 361
Direct selective laser sintering and melting of ceramics: a review
Sing, S. L., Yeong, W. Y., Wiria, F. E., Tay, B. Y., Zhao, Z., Zhao, L., Tian, Z., & Yang, S. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0178 · Cited by 359
Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting
Sallica-Leva, E., Jardini, A. L., & Fogagnolo, J. B. (2013) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2013.05.011 · Cited by 340
Advances in metals and alloys for joint replacement
Kunčická, L., Kocich, R., & Lowe, T. C. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.002 · Cited by 329
Yan, X., Yin, S., Chen, C., Huang, C., Bolot, R., Lupoi, R., Kuang, M., Ma, W., Coddet, C., Liao, H., et al. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.06.076 · Cited by 326
Additive Manufacturing: Making Imagination the Major Limitation
Zhai, Y., Lados, D. A., & LaGoy, J. L. (2014) · JOM · doi:10.1007/s11837-014-0886-2 · Cited by 324
AlMangour, B., Grzesiak, D., & Jenn-MingYang (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.018 · Cited by 321
Liu, Q., Wu, H., Paul, M. J., He, P., Peng, Z., Gludovatz, B., Kruzic, J. J., Wang, C. H., & Li, X. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.10.010 · Cited by 321
Van Hooreweder, B., Apers, Y., Lietaert, K., & Kruth, J.-P. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.10.005 · Cited by 318
Self-citationA Review on High‐Strength Titanium Alloys: Microstructure, Strengthening, and Properties
Kang, L., & Yang, C. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801359 · Cited by 318
Research status of laser additive manufacturing for metal: a review
Gong, G., Ye, J., Chi, Y., Zhao, Z., Wang, Z., Xia, G., Du, X., Tian, H., Yu, H., & Chen, C. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.08.050 · Cited by 318
Maskery, I., Aboulkhair, N. T., Corfield, M. R., Tuck, C., Clare, A. T., Leach, R. K., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2016) · Materials Characterization · doi:10.1016/j.matchar.2015.12.001 · Cited by 317
Wei, P., Wei, Z., Chen, Z., Du, J., He, Y., Li, J., & Zhou, Y. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.02.215 · Cited by 307
Tong, Z., Ren, X., Jiao, J., Zhou, W., Ren, Y., Ye, Y., Larson, E. A., & Gu, J. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.01.213 · Cited by 304
Trevisan, F., Calignano, F., Aversa, A., Marchese, G., Lombardi, M., Biamino, S., Ugues, D., & Manfredi, D. (2018) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.5000371 · Cited by 295
Textures formed in a CoCrMo alloy by selective laser melting
Zhou, X., Li, K., Zhang, D., Liu, X., Ma, J., Liu, W., & Shen, Z. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.01.096 · Cited by 291
Zhang, F., Levine, L. E., Allen, A. J., Stoudt, M. R., Lindwall, G., Lass, E. A., Williams, M. E., Idell, Y., & Campbell, C. E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.03.017 · Cited by 291
Jafari, D., & Wits, W. W. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.109 · Cited by 289
Fatemi, A., Molaei, R., Sharifimehr, S., Phan, N., & Shamsaei, N. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.03.044 · Cited by 282
Sun, Y., Hebert, R. J., & Aindow, M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.015 · Cited by 277
Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
Qian, M., Xu, W., Brandt, M., & Tang, H. P. (2016) · MRS Bulletin · doi:10.1557/mrs.2016.215 · Cited by 275
Advances in Porous Scaffold Design for Bone and Cartilage Tissue Engineering and Regeneration
Cheng, A., Schwartz, Z., Kahn, A., Li, X., Shao, Z., Sun, M., Ao, Y., Boyan, B. D., & Chen, H. (2019) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2018.0119 · Cited by 275
Zhang, X.-Y., Fang, G., Leeflang, S., Böttger, A. J., A. Zadpoor, A., & Zhou, J. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.11.263 · Cited by 274
Huang, W., Yang, J., Yang, H., Jing, G., Wang, Z., & Zeng, X. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.02.046 · Cited by 274
Additive manufacturing of ceramics: Advances, challenges, and outlook
Dadkhah, M., Tulliani, J.-M., Saboori, A., & Iuliano, L. (2023) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2023.07.033 · Cited by 272
Zhang, M., Zhao, N., Yu, Q., Liu, Z., Qu, R., Zhang, J., Li, S., Ren, D., Berto, F., Zhang, Z., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-30873-9 · Cited by 267
Kaschel, F. R., Vijayaraghavan, R. K., Shmeliov, A., McCarthy, E. K., Canavan, M., McNally, P. J., Dowling, D. P., Nicolosi, V., & Celikin, M. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.02.056 · Cited by 261
Corrosion of metallic materials fabricated by selective laser melting
Kong, D., Dong, C., Ni, X., & Li, X. (2019) · npj Materials Degradation · doi:10.1038/s41529-019-0086-1 · Cited by 259
Abd-Elaziem, W., Elkatatny, S., Abd-Elaziem, A.-E., Khedr, M., Abd El-baky, M. A., Hassan, M. A., Abu-Okail, M., Mohammed, M., Järvenpää, A., Allam, T., et al. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.085 · Cited by 257
Girelli, L., Tocci, M., Gelfi, M., & Pola, A. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.10.026 · Cited by 255
Pegues, J. W., Shao, S., Shamsaei, N., Sanaei, N., Fatemi, A., Warner, D. H., Li, P., & Phan, N. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.105358 · Cited by 236
Agentic additive manufacturing alloy evaluation
Pak, P., Chandrasekhar, A., & Barati Farimani, A. (2026) · Additive Manufacturing Letters · doi:10.1016/j.addlet.2026.100355 · Cited by 4
Metadata
- Authors
- Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2012-11
- Volume
- 541
- Pages
- 177-185
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W2042310099
- Cited by
- 1,896
- References
- 26
- FWCI
- 52.43
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.