The DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
Open accessAbstract
The emergence of advanced manufacturing technologies, coupled with consumer demands for more customised products and services, are causing shifts in the scale and distribution of manufacturing. In this paper, consideration is given to the role of one such advanced manufacturing process technology: additive manufacturing. The consequences of adopting this novel production technology on industrial sustainability are not well understood and this exploratory study draws on publically available data to provide insights into the impacts of additive manufacturing on sustainability. Benefits are found to exist across the product and material life cycles through product and process redesign, improvements to material input processing, make-to-order component and product manufacturing, and closing the loop. As an immature technology, there are substantial challenges to these benefits being realised at each stage of the life cycle. This paper summarises these advantages and challenges, and discusses the implications of additive manufacturing on sustainability in terms of the sources of innovation, business models, and the configuration of value chains.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1984) · Cited by 81,983
Case Study Research: Design and Methods
Chaiklin, H. (1991) · The Journal of Nervous and Mental Disease · doi:10.1097/00005053-199102000-00025 · Cited by 39,535
Exploration and Exploitation in Organizational Learning
March, J. G. (1991) · Organization Science · doi:10.1287/orsc.2.1.71 · Cited by 21,942
(1985) · American Economic Review · Cited by 6,056
Ambidextrous Organizations: Managing Evolutionary and Revolutionary Change
Tushman, M. L., & O'Reilly, C. A. (1996) · California Management Review · doi:10.2307/41165852 · Cited by 4,950
Information Rules: A Strategic Guide to the Network Economy
Shaw, M. J., Shapiro, C., & Varian, H. R. (2000) · The Academy of Management Review · doi:10.2307/259025 · Cited by 4,124
Cradle to cradle: remaking the way we make things
(2002) · Choice Reviews Online · doi:10.5860/choice.40-0914 · Cited by 3,829
Shaping Technology, Building Society: Studies in Sociotechnical Change.
Lynch, M., Bijker, W. E., & Law, J. (1993) · Contemporary Sociology · doi:10.2307/2074370 · Cited by 3,540
3-D printing: The new industrial revolution
Berman, B. (2012) · Business Horizons · doi:10.1016/j.bushor.2011.11.003 · Cited by 2,481
A Conceptual Framework for Describing the Phenomenon of New Venture Creation
Gartner, W. B. (1985) · The Academy of Management Review · doi:10.5465/amr.1985.4279094 · Cited by 2,424
Wellsprings of knowledge: building and sustaining the sources of innovation
(1996) · Choice Reviews Online · doi:10.5860/choice.33-3996 · Cited by 2,085
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
The innovator's solution: creating and sustaining successful growth
(2014) · Choice Reviews Online · doi:10.5860/choice.51-5108 · Cited by 2,002
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Business model design and the performance of entrepreneurial firms
Zott, C., & Amit, R. (2007) · Organization Science · doi:10.1287/orsc.1060.0232 · Cited by 1,707
Exploring the financial consequences of the servitization of manufacturing
Neely, A. (2008) · Operations Management Research · doi:10.1007/s12063-009-0015-5 · Cited by 1,370
Opportunities and Entrepreneurship
Eckhardt, J. (2003) · Journal of Management · doi:10.1016/s0149-2063(02)00225-8 · Cited by 1,351
A global sustainability perspective on 3D printing technologies
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950
Shaping technology/Building society
Bullard, C. W. (1994) · The Journal of Technology Transfer · doi:10.1007/bf02373670 · Cited by 870
Short, J. C., Ketchen, D. J., Shook, C. L., & Ireland, R. D. (2010) · Journal of Management · doi:10.1177/0149206309342746 · Cited by 816
EVOLUTIONARY ECONOMICS AND CREATIVE DESTRUCTION
Metcalfe, J. S. (1998) · Taylor & Francis eBooks · doi:10.4324/9780203275146 · Cited by 751
Additive layered manufacturing: sectors of industrial application shown through case studies
Petrovic, V., Vicente Haro Gonzalez, J., Jordá Ferrando, O., Delgado Gordillo, J., Ramón Blasco Puchades, J., & Portolés Griñan, L. (2011) · International Journal of Production Research · doi:10.1080/00207540903479786 · Cited by 676
Economics of additive manufacturing for end-usable metal parts
Atzeni, E., & Salmi, A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3878-1 · Cited by 630
Evolutionary Economics and Creative Destruction
(2002) · Routledge eBooks · doi:10.4324/9780203018927 · Cited by 629
Life cycle assessment in the construction sector: A review
Buyle, M., Braet, J., & Audenaert, A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.05.001 · Cited by 558
Direct digital manufacturing: definition, evolution, and sustainability implications
Chen, D., Heyer, S., Ibbotson, S., Salonitis, K., Steingrímsson, J. G., & Thiede, S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.05.009 · Cited by 498
3D Printing Disrupts Manufacturing: How Economies of One Create New Rules of Competition
Petrick, I. J., & Simpson, T. W. (2013) · Research-Technology Management · doi:10.5437/08956308x5606193 · Cited by 443
Faludi, J., Bayley, C., Bhogal, S., & Iribarne, M. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2013-0067 · Cited by 431
Information Rules: A Strategic Guide to the Network Economy
Cassell, K. A., & Mercado, M. I. (1999) · The Bottom Line · doi:10.1108/bl.1999.17012aad.003 · Cited by 424
Simultaneous Experimentation as a Learning Strategy: Business Model Development Under Uncertainty
Andries, P., Debackere, K., & van Looy, B. (2013) · Strategic Entrepreneurship Journal · doi:10.1002/sej.1170 · Cited by 380
Thermodynamic Analysis of Resources Used in Manufacturing Processes
Gutowski, T. G., Branham, M. S., Dahmus, J. B., Jones, A. J., Thiriez, A., & Sekulic, D. P. (2009) · Environmental Science & Technology · doi:10.1021/es8016655 · Cited by 376
Wellsprings of knowledge: Building and sustaining the sources of innovation
Deiss, K. J. (1996) · The Journal of Academic Librarianship · doi:10.1016/s0099-1333(96)90108-1 · Cited by 356
Yoon, H.-S., Lee, J.-Y., Kim, H.-S., Kim, M.-S., Kim, E.-S., Shin, Y.-J., Chu, W.-S., & Ahn, S.-H. (2014) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-014-0033-0 · Cited by 324
Addressing sustainability in research on distributed production: an integrated literature review
Kohtala, C. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.09.039 · Cited by 290
Bourhis, F. L., Kerbrat, O., Hascoet, J.-Y., & Mognol, P. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5151-2 · Cited by 269
Murr, L. E., Gaytan, S. M., Medina, F., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., & Wicker, R. B. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.11.015 · Cited by 258
Sustainability Characterization for Additive Manufacturing
Mani, M., Lyons, K. W., & Gupta, S. K. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.016 · Cited by 250
A classification model for product-service offerings
Gaiardelli, P., Resta, B., Martinez, V., Pinto, R., & Albores, P. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.11.032 · Cited by 238
A framework for mapping industrial emergence
Phaal, R., O'Sullivan, E., Routley, M., Ford, S., & Probert, D. (2011) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2010.06.018 · Cited by 218
Self-citationPotential of cold gas dynamic spray as additive manufacturing technology
Sova, A., Grigoriev, S., Okunkova, A., & Smurov, I. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5166-8 · Cited by 194
Baumers, M., Tuck, C., Bourell, D. L., Sreenivasan, R., & Hague, R. (2011) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405411406044 · Cited by 180
Wood polymer composites and their contribution to cascading utilisation
Teuber, L., Osburg, V.-S., Toporowski, W., Militz, H., & Krause, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.009 · Cited by 172
Sustainability issues in laser-based additive manufacturing
Sreenivasan, R., Goel, A., & Bourell, D. L. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.124 · Cited by 159
Affective and cognitive design for mass personalization: status and prospect
Zhou, F., Ji, Y., & Jiao, J. R. (2012) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-012-0673-2 · Cited by 143
The Role of Additive Manufacturing in Improving Resource Efficiency and Sustainability
Despeisse, M., & Ford, S. J. (2015) · IFIP advances in information and communication technology · doi:10.1007/978-3-319-22759-7_15 · Cited by 143
Self-citationSandström, C. G. (2015) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2015.09.006 · Cited by 139
Titanium powder metallurgy : science, technology and applications
Qian, M., & Froes, F. H. (2015) · Elsevier eBooks · Cited by 137
Anticipated environmental sustainability of personal fabrication
Kohtala, C., & Hyysalo, S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.093 · Cited by 132
Additive Manufacturing in Aerospace; Examples and Research Outlook
Lyons, B. (2014) · The Bridge · Cited by 96
Early Business Model Evolution in Science-based Ventures: The Case of Advanced Materials
Lubik, S., & Garnsey, E. W. (2015) · Long Range Planning · doi:10.1016/j.lrp.2015.03.001 · Cited by 91
Innovation lessons from 3-D printing
de Jong, J. P. J., & de Bruijn, E. (2014) · IEEE Engineering Management Review · doi:10.1109/emr.2014.6966948 · Cited by 82
Enhancing the sustainability of additive manufacturing
Hao, L., Raymond, D., Strano, G., & Dadbakhsh, S. (2010) · International Conference on Responsive Manufacturing (ICRM) · doi:10.1049/cp.2010.0462 · Cited by 58
Characterization of laser energy consumption in sintering of polymer based powders
Franco, A., & Romoli, L. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.12.003 · Cited by 50
Titanium powder production via the Metalysis process
Mellor, I. M., Grainger, L., Rao, K. S., Deane, J., Conti, M., Doughty, G., & Vaughan, D. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800054-0.00004-6 · Cited by 38
The industrial emergence of commercial inkjet printing
Ford, S. J., Routley, M. J., Phaal, R., & Probert, D. R. (2014) · European Journal of Innovation Management · doi:10.1108/ejim-01-2013-0002 · Cited by 19
Self-citationFox, S., & Li, L. (2011) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2011.10.006 · Cited by 19
Cited by
Industry 4.0, digitization, and opportunities for sustainability
Ghobakhloo, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119869 · Cited by 2,115
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
Directed Energy Deposition (DED) Process: State of the Art
Ahn, D.-G. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00302-7 · Cited by 803
Bonilla, S. H., Silva, H. R. O., Terra da Silva, M., Franco Gonçalves, R., & Sacomano, J. B. (2018) · Sustainability · doi:10.3390/su10103740 · Cited by 645
Metal additive manufacturing in the commercial aviation industry: A review
Gisario, A., Kazarian, M., Martina, F., & Mehrpouya, M. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.08.005 · Cited by 574
Metadata
- Authors
- Ford, S., & Despeisse, M.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2016-11
- Volume
- 137
- Pages
- 1573-1587
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2388726286
- Cited by
- 1,889
- References
- 56
- FWCI
- 97.70
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.