The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
Links between circular economy and climate change mitigation in the built environment
Open accessAbstract
The construction sector represents one of the most significant sources of waste generation in the European Union (EU), with nearly one billion tonnes of construction and demolition waste annually. This sector also contributes a third of the annual EU greenhouse gas (GHG) emissions. Accordingly, construction represents one priority area for intervention within the EU Action Plan for the Circular Economy. Increasing resource efficiency through slowing, closing, and narrowing material and energy loops, is key to mitigating climate change. However, this review paper demonstrates that the analysis of links between circular economy solutions and climate change mitigation has been scarce, despite a recent sharp increase in related literature, with 20 articles (83%) published in 2018–2019. Slowing resource solutions have been the focus of the research and could bring up to 99% savings in GHG emissions per functional unit, where material reuse stands out as the most promising alternative. Closing resource solutions can reduce emissions by 30–50% per functional unit, but results are highly dependent on recycling efficiencies and transportation distances to recovery facilities. Solutions for narrowing resource loops can bring additional GHG savings, but they remain understudied. Despite the promising results for mitigating GHG emissions, this article argues that the circular economy solutions do not always result by default in emission reductions and that a case-by-case quantification is crucial. The implementation of these solutions should be accompanied with further methodological development, such as proper allocation procedures, accurate definition of the system boundaries and integration of forecasts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Circular Economy–A new sustainability paradigm?
Geissdoerfer, M., Savaget, P., Bocken, N. M. P., & Hultink, E. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.048 · Cited by 9,360
Conceptualizing the circular economy: An analysis of 114 definitions
Kirchherr, J., Reike, D., & Hekkert, M. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.005 · Cited by 8,550
Kyoto Protocol to the United Nations Framework Convention on Climate Change
(2018) · International Law Documents · doi:10.1017/9781316577226.067 · Cited by 4,351
Product design and business model strategies for a circular economy
Bocken, N. M. P., de Pauw, I., Bakker, C., & van der Grinten, B. (2016) · Journal of Industrial and Production Engineering · doi:10.1080/21681015.2016.1172124 · Cited by 4,002
Watson, R., Albritton, D. L., Barker, T., Baskmakov, I., Canziani, O. F., Christ, R., Ulrich Cubasch, B., Davidson, O., Gitay, H., Griggs, D., et al. (2001) · Cited by 3,473
Circular economy—From review of theories and practices to development of implementation tools
Kalmykova, Y., Sadagopan, M., & Rosado, L. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.034 · Cited by 1,412
How do scholars approach the circular economy? A systematic literature review
Merli, R., Preziosi, M., & Acampora, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.112 · Cited by 1,358
Zink, T., & Geyer, R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12545 · Cited by 1,210
Environment: Waste production must peak this century
Hoornweg, D., Bhada-Tata, P., & Kennedy, C. (2013) · Nature · doi:10.1038/502615a · Cited by 785
Ghisellini, P., Ripa, M., & Ulgiati, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.207 · Cited by 706
(2005) · Compendium of Sustainable Energy Laws · doi:10.1017/cbo9780511664885.043 · Cited by 664
Operational vs. embodied emissions in buildings—A review of current trends
Ibn-Mohammed, T., Greenough, R., Taylor, S., Ozawa-Meida, L., & Acquaye, A. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.07.026 · Cited by 594
Comparing linear and circular supply chains: A case study from the construction industry
Nasir, M. H. A., Genovese, A., Acquaye, A. A., Koh, S. C. L., & Yamoah, F. (2017) · International Journal of Production Economics · doi:10.1016/j.ijpe.2016.06.008 · Cited by 503
Hertwich, E. G., Ali, S., Ciacci, L., Fishman, T., Heeren, N., Masanet, E., Asghari, F. N., Olivetti, E., Pauliuk, S., Tu, Q., et al. (2019) · Environmental Research Letters · doi:10.1088/1748-9326/ab0fe3 · Cited by 477
Carbon Emissions of Infrastructure Development
Müller, D. B., Liu, G., Løvik, A. N., Modaresi, R., Pauliuk, S., Steinhoff, F. S., & Brattebø, H. (2013) · Environmental Science & Technology · doi:10.1021/es402618m · Cited by 445
Heyes, G., Sharmina, M., Mendoza, J. M. F., Gallego-Schmid, A., & Azapagic, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.168 · Cited by 360
Self-citationIntegrating Backcasting and Eco‐Design for the Circular Economy: The BECE Framework
Mendoza, J. M. F., Sharmina, M., Gallego‐Schmid, A., Heyes, G., & Azapagic, A. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12590 · Cited by 354
Self-citationGlobal Resources Outlook 2019: Natural Resources for the Future We Want
Oberlé, B., Bringezu, S., Hatfield–Dodds, S., Hellweg, S., Schandl, H., Clement, J., Cabernard, L., Che, N., Chen, D., Droz-Georget, H., et al. (2019) · IIASA PURE (International Institute of Applied Systems Analysis) · Cited by 341
Industrial ecology in integrated assessment models
Pauliuk, S., Arvesen, A., Stadler, K., & Hertwich, E. G. (2017) · Nature Climate Change · doi:10.1038/nclimate3148 · Cited by 288
Influence of construction and demolition waste management on the environmental impact of buildings
Coelho, A., & de Brito, J. (2012) · Waste Management · doi:10.1016/j.wasman.2011.11.011 · Cited by 283
Nußholz, J. L. K., Nygaard Rasmussen, F., & Milios, L. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.10.036 · Cited by 277
Esa, M. R., Halog, A., & Rigamonti, L. (2017) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-016-0516-x · Cited by 275
Environmental impacts of the UK residential sector: Life cycle assessment of houses
Cuéllar-Franca, R. M., & Azapagic, A. (2012) · Building and Environment · doi:10.1016/j.buildenv.2012.02.005 · Cited by 272
Understanding and overcoming the barriers to structural steel reuse, a UK perspective
Densley Tingley, D., Cooper, S., & Cullen, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.006 · Cited by 261
Petersen, A. K., & Solberg, B. (2005) · Forest Policy and Economics · doi:10.1016/s1389-9341(03)00063-7 · Cited by 222
Potential of Circular Economy in Sustainable Buildings
Eberhardt, L. C. M., Birgisdóttir, H., & Birkved, M. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/471/9/092051 · Cited by 209
The greenhouse gas emissions and mitigation options for materials used in UK construction
Giesekam, J., Barrett, J., Taylor, P., & Owen, A. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.04.035 · Cited by 202
Life cycle assessment of a Danish office building designed for disassembly
Eberhardt, L. C. M., Birgisdóttir, H., & Birkved, M. (2019) · Building Research & Information · doi:10.1080/09613218.2018.1517458 · Cited by 202
Buyle, M., Galle, W., Debacker, W., & Audenaert, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.306 · Cited by 177
Building a business case for implementation of a circular economy in higher education institutions
Mendoza, J. M. F., Gallego‐Schmid, A., & Azapagic, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.045 · Cited by 175
Self-citationAntunes, V., Freire, A. C., & das Neves, J. M. C. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.258 · Cited by 175
Design of Truss Structures Through Reuse
Brütting, J., Desruelle, J., Senatore, G., & Fivet, C. (2018) · Structures · doi:10.1016/j.istruc.2018.11.006 · Cited by 173
Material efficiency: providing material services with less material production
Allwood, J. M., Ashby, M. F., Gutowski, T. G., & Worrell, E. (2013) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2012.0496 · Cited by 172
A novel selective disassembly sequence planning method for adaptive reuse of buildings
Sanchez, B., & Haas, C. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.201 · Cited by 158
Environmental benefits arising from demountable steel-concrete composite floor systems in buildings
Brambilla, G., Lavagna, M., Vasdravellis, G., & Castiglioni, C. A. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.10.014 · Cited by 146
An investigation on the recycling of hydrated cement from concrete demolition waste
Gastaldi, D., Canonico, F., Capelli, L., Buzzi, L., Boccaleri, E., & Irico, S. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.04.010 · Cited by 135
A review on upcycling: current body of literature, knowledge gaps and a way forward
Sung, K. K. (2015) · DMU Open Research Archive (De Montfort University) · Cited by 135
Link between climate change mitigation and resource efficiency: A UK case study
Barrett, J., & Scott, K. (2011) · Global Environmental Change · doi:10.1016/j.gloenvcha.2011.11.003 · Cited by 124
City-level decoupling: urban resource flows and the governance of infrastructure transitions
Swilling, M., Robinson, B., Marvin, S., et al. (2013) · Cited by 116
Recovery and reuse of structural products from end-of-life buildings
Hopkinson, P., Chen, H.-M., Zhou, K., Wang, Y., & Lam, D. (2019) · Proceedings of the Institution of Civil Engineers - Engineering Sustainability · doi:10.1680/jensu.18.00007 · Cited by 115
Self-citationTechnological, economic and financial prospects of carbon dioxide capture in the cement industry
Li, J., Tharakan, P. J., Macdonald, D., & Liang, X. (2013) · Energy Policy · doi:10.1016/j.enpol.2013.05.082 · Cited by 111
Robèrt, K., Broman, G. I., & Basile, G. (2013) · Ecology and Society · doi:10.5751/es-05336-180205 · Cited by 100
Ferreira, J. G., Pinheiro, M. D., & de Brito, J. (2015) · Journal of Building Engineering · doi:10.1016/j.jobe.2015.07.001 · Cited by 90
What is missing from the concept of the new European Building Directive?
Szalay, Z. (2006) · Building and Environment · doi:10.1016/j.buildenv.2005.12.003 · Cited by 89
Aligning carbon targets for construction with (inter)national climate change mitigation commitments
Giesekam, J., Tingley, D. D., & Cotton, I. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.01.023 · Cited by 89
Real and perceived barriers to steel reuse across the UK construction value chain
Dunant, C. F., Drewniok, M. P., Sansom, M., Corbey, S., Allwood, J. M., & Cullen, J. M. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.07.036 · Cited by 88
Best practices for the management of end-of-life gypsum in a circular economy
Jiménez-Rivero, A., & Navarro, J. G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.068 · Cited by 85
Thermodynamic insights and assessment of the ‘circular economy’
Cooper, S., Giesekam, J., Hammond, G. P., Norman, J., Owen, A., Rogers, J., & Scott, K. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.06.169 · Cited by 82
Upcycling and Design for Disassembly – LCA of buildings employing circular design strategies
Rasmussen, F. N., Birkved, M., & Birgisdóttir, H. (2019) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/225/1/012040 · Cited by 81
Jiménez-Rivero, A., & Navarro, J. G. (2016) · Waste and Biomass Valorization · doi:10.1007/s12649-016-9561-x · Cited by 77
Camilleri, M. A. (2018) · International Journal of Sustainable Development · doi:10.1504/ijsd.2018.10012310 · Cited by 70
Material savings through structural steel reuse: A case study in Genoa
Pongiglione, M., & Calderini, C. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2014.02.011 · Cited by 69
Valorisation of recycled concrete sands in cement raw meal for cement production
Diliberto, C., Lecomte, A., Mechling, J.-M., Izoret, L., & Smith, A. (2017) · Materials and Structures · doi:10.1617/s11527-017-0996-8 · Cited by 64
Mass timber in the circular economy: paradigm in practice?
Campbell, A. (2019) · Proceedings of the Institution of Civil Engineers - Engineering Sustainability · doi:10.1680/jensu.17.00069 · Cited by 62
Extending European energy efficiency standards to include material use: an analysis
Scott, K., Roelich, K. E., Owen, A., & Barrett, J. (2017) · Climate Policy · doi:10.1080/14693062.2017.1333949 · Cited by 55
The reuse of load-bearing components
Brütting, J., Wolf, C. D., & Fivet, C. (2019) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/225/1/012025 · Cited by 55
Comparing life cycle assessment modelling of linear vs. circular building components
Eberhardt, L. C. M., Birgisdóttir, H., & Birkved, M. (2019) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/225/1/012039 · Cited by 55
Bridging the climate mitigation gap with economy‐wide material productivity
Scott, K., Giesekam, J., Barrett, J., & Owen, A. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12831 · Cited by 47
Environmental comparison of indoor floor coverings
Ros-Dosdá, T., Celades, I., Vilalta, L., Fullana–i–Palmer, P., & Monfort, E. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.07.325 · Cited by 42
Ingrao, C., Arcidiacono, C., Bezama, A., Ioppolo, G., Winans, K. S., Koutinas, A., & Gallego‐Schmid, A. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.04.001 · Cited by 36
Self-citationBarriers for Deconstruction and Reuse/Recycling of Construction Materials in Germany
Kühlen, A., Thompson, N., & Schultmann, F. (2014) · Repository KITopen (Karlsruhe Institute of Technology) · doi:10.5445/ir/1000052698 · Cited by 32
The "Donor Skelet": Designing with reused structural concrete elements
Glias, A. (2013) · Research Repository (Delft University of Technology) · Cited by 22
Meeting the UK climate change challenge: The contribution of resource efficiency
Scott, K., Barrett, J., Baiocchi, G., & Minx, J. C. (2009) · UEA Digital Repository (University of East Anglia) · Cited by 20
Castro, R., & Pasanen, P. (2019) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/225/1/012019 · Cited by 20
Challenges facing carbon dioxide labelling of construction materials
Ng, S. T., Wong, J. M. W., & Skitmore, M. (2013) · The HKU Scholars Hub (University of Hong Kong) · doi:10.1680/ensu.11.00028 · Cited by 17
Migliore, M., Carpinella, M., Paganin, G., Paolieri, F., & Talamo, C. M. L. (2018) · Environmental Engineering and Management Journal · doi:10.30638/eemj.2018.249 · Cited by 17
Cited by
Circular economy in the building and construction sector: a scientific evolution analysis
Norouzi, M., Chàfer, M., Cabeza, L. F., Jiménez, L., & Boer, D. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102704 · Cited by 482
Circular economy implementation in the agricultural sector: Definition, strategies and indicators
Velasco-Muñoz, J. F., Mendoza, J. M. F., Aznar-Sánchez, J. A., & Gallego-Schmid, A. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2021.105618 · Cited by 388
Self-citationPauliuk, S., Heeren, N., Berrill, P., Fishman, T., Nistad, A., Tu, Q., Wolfram, P., & Hertwich, E. G. (2021) · Nature Communications · doi:10.1038/s41467-021-25300-4 · Cited by 352
Construction and built environment in circular economy: A comprehensive literature review
Çimen, Ö. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127180 · Cited by 269
Building materials in a circular economy: The case of wood waste as CO2-sink in bio concrete
Caldas, L. R., Saraiva, A. B., Lucena, A. F. P., Da Gloria, M. Y., Santos, A. S., & Filho, R. D. T. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.105346 · Cited by 110
Metadata
- Authors
- Gallego-Schmid, A., Chen, H.-M., Sharmina, M., & Mendoza, J. M. F.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 260
- Pages
- 121115
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3012068982
- Cited by
- 340
- References
- 66
- FWCI
- 41.33
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.