CoChat

Biochars for the removal of naphthenic acids from water: A prospective approach towards remediation of petroleum refinery wastewater

Singh, Raghuvir, Naik, Desavath V., Dutta, R.K., Kanaujia, Pankaj K. · 2020 · Journal of Cleaner Production
Cited by 63

The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.

Abstract

We report methodology for developing three different surface modified biochars produced from rice straw, bagasse, and eucalyptus wood for the adsorptive removal of benzoic acid as a model pollutant for remediation of naphthenic acid-rich petroleum refinery wastewater. Solid-phase extraction or miniaturized column format packed with (a) untreated biochars; (b) acid-treated (HCl and HNO3) biochars; and (c) non-covalent PDDA (cationic polyelectrolyte) wrapped biochars were employed for the adsorption studies. The benzoic acid loading capacities were in the range of 0.46 and 7.97 mg g−1, with an order of loading as: HCl-treated > HNO3-treated > PDDA-treated > untreated biochar. The acid-treated biochars revealed an increase in the oxygen content (wt %) owing to –COOH groups, corroborated by FTIR studies and point of zero charges (pHzpc) = 2.40. The best loading result, attributed to dipole-based or π-π stacking, was obtained for HCl-treated rice straw biochars. Its BET surface area increased from 18.45 m2 g−1 (untreated) to 49.01 m2 g−1 HCl-treated, with pore volume (0.067 cm3 g−1) and pore diameter (55.27 A), corroborated by observation of pores of different sizes and patterns by scanning electron microscopy. The optimum pH for maximum adsorption of benzoic acid was 2, and 3 mL methanol was used to regenerate the biochar column with up to 90% removal of the adsorbate. Validation of experimental parameters was performed through naphthenic acid spiked water, and the results were also compared with adsorption over activated carbon. Our results are optimistic towards developing biochars as a low-cost and eco-friendly option to manage agricultural waste for removing pollutants from water.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.jclepro.2020.121986

Cites

16 of 16 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 63

Metadata

Authors
Singh, R., Naik, D. V., Dutta, R. K., & Kanaujia, P. K.
Venue
Journal of Cleaner Production
Publisher
Elsevier BV
Published
2020-09
Volume
266
Pages
121986
ISSN
0959-6526 (ISSN-L)
OpenAlex
W3025703181
Cited by
63
References
16
FWCI
2.86
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.