The DOI matches its Crossref record; 156 of the 156 references it cites were found in a registry or an index.
A systematic review of additive manufacturing-based remanufacturing techniques for component repair and restoration
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Wang, Z., Jiang, X., Yang, G., Liu, W., & Song, B. (2022) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-16303-1 · Cited by 10
RetractedAdditive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Strategic Issues in Product Recovery Management
Thierry, M., Salomon, M., Van Nunen, J., & Van Wassenhove, L. (1995) · California Management Review · doi:10.2307/41165792 · Cited by 1,437
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.020 · Cited by 1,371
45th AIAA Aerospace Sciences Meeting and Exhibit
(2007) · doi:10.2514/masm07 · Cited by 1,210
Proceedings of ASME Turbo Expo 2014
Yunusa‐Kaltungo, A. (2014) · Research Explorer (The University of Manchester) · Cited by 1,206
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Directed Energy Deposition (DED) Process: State of the Art
Ahn, D.-G. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00302-7 · Cited by 803
3D printing – A review of processes, materials and applications in industry 4.0
Jandyal, A., Chaturvedi, I., Wazir, I., Raina, A., & Ul Haq, M. I. (2022) · Sustainable Operations and Computers · doi:10.1016/j.susoc.2021.09.004 · Cited by 739
Review of additive manufacturing technologies and applications in the aerospace industry
Najmon, J. C., Raeisi, S., & Tovar, A. (2019) · Additive Manufacturing for the Aerospace Industry · doi:10.1016/b978-0-12-814062-8.00002-9 · Cited by 719
Additive manufacturing of metals: Microstructure evolution and multistage control
Liu, Z., Zhao, D., Wang, P., Yan, M., Yang, C., Chen, Z., Lü, J., & Lü, Z. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.06.011 · Cited by 649
Cold spray additive manufacturing and repair: Fundamentals and applications
Yin, S., Cavaliere, P., Aldwell, B., Jenkins, R., Liao, H., Li, W., & Lupoi, R. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.017 · Cited by 599
Wilson, J. M., Piya, C., Shin, Y. C., Zhao, F., & Ramani, K. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.05.084 · Cited by 543
Application of Directed Energy Deposition-Based Additive Manufacturing in Repair
Saboori, A., Aversa, A., Marchese, G., Biamino, S., Lombardi, M., & Fino, P. (2019) · Applied Sciences · doi:10.3390/app9163316 · Cited by 537
Reducing waste: repair, recondition, remanufacture or recycle?
King, A. M., Burgess, S. C., Ijomah, W., & McMahon, C. A. (2006) · Sustainable Development · doi:10.1002/sd.271 · Cited by 502
Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2015) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1177/0954410014568797 · Cited by 489
Remanufacturing for the Circular Economy: An Examination of Consumer Switching Behavior
Hazen, B. T., Mollenkopf, D. A., & Wang, Y. (2017) · Business Strategy and the Environment · doi:10.1002/bse.1929 · Cited by 429
Solid-state additive manufacturing and repairing by cold spraying: A review
Li, W., Yang, K., Yin, S., Yang, X., Xu, Y., & Lupoi, R. (2017) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2017.09.015 · Cited by 414
Industry 4.0, a revolution that requires technology and national strategies
Yang, F., & Gu, S. (2021) · Complex & Intelligent Systems · doi:10.1007/s40747-020-00267-9 · Cited by 365
Development of design for remanufacturing guidelines to support sustainable manufacturing
Ijomah, W. L., McMahon, C. A., Hammond, G. P., & Newman, S. T. (2007) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2007.02.017 · Cited by 363
Non-beam-based metal additive manufacturing enabled by additive friction stir deposition
Yu, H. Z., Jones, M. E., Brady, G. W., Griffiths, R. J., Garcia, D., Rauch, H. A., Cox, C. D., & Hardwick, N. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.03.025 · Cited by 361
Hinojos, A., Mireles, J., Reichardt, A., Frigola, P., Hosemann, P., Murr, L. E., & Wicker, R. B. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.041 · Cited by 337
Towards high-temperature applications of aluminium alloys enabled by additive manufacturing
Michi, R. A., Plotkowski, A., Shyam, A., Dehoff, R., & Babu, S. S. (2021) · International Materials Reviews · doi:10.1080/09506608.2021.1951580 · Cited by 335
Additive Manufacturing for the Aerospace Industry
(2019) · Elsevier eBooks · doi:10.1016/c2017-0-00712-7 · Cited by 331
Digital twin-based WEEE recycling, recovery and remanufacturing in the background of Industry 4.0
Wang, X. V., & Wang, L. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1497819 · Cited by 330
Extrusion-based additive manufacturing technologies: State of the art and future perspectives
Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320
Trends and research challenges in remanufacturing
Matsumoto, M., Yang, S., Martinsen, K., & Kainuma, Y. (2016) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-016-0016-4 · Cited by 273
Additive friction stir deposition: a deformation processing route to metal additive manufacturing
Yu, H. Z., & Mishra, R. S. (2021) · Materials Research Letters · doi:10.1080/21663831.2020.1847211 · Cited by 248
Rivera, O. G., Allison, P. G., Jordon, J. B., Rodriguez, O. L., Brewer, L. N., McClelland, Z., Whittington, W. R., Francis, D., Su, J., Martens, R. L., et al. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.03.105 · Cited by 242
Robust Metal Additive Manufacturing Process Selection and Development for Aerospace Components
Gradl, P., Tinker, D. C., Park, A., Mireles, O. R., Garcia, M., Wilkerson, R., & Mckinney, C. (2022) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-022-06850-0 · Cited by 240
Research needs and recommendations on environmental implications of additive manufacturing
Rejeski, D., Zhao, F., & Huang, Y. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.019 · Cited by 233
Advances in powder bed fusion 3D printing in drug delivery and healthcare
Awad, A., Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.04.025 · Cited by 232
Xu, N., Ye, X., Wei, D., Zhong, J., Chen, Y., Xu, G., & He, D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502716t · Cited by 231
A repair and overhaul methodology for aeroengine components
Yilmaz, O., Gindy, N., & Gao, J. (2010) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2009.07.001 · Cited by 227
Laser Metal Deposition as Repair Technology for Stainless Steel and Titanium Alloys
Graf, B., Gumenyuk, A., & Rethmeier, M. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.051 · Cited by 218
Polymer Recycling in Additive Manufacturing: an Opportunity for the Circular Economy
Shanmugam, V., Das, O., Neisiany, R. E., Babu, K., Singh, S., Hedenqvist, M. S., Berto, F., & Ramakrishna, S. (2020) · Materials Circular Economy · doi:10.1007/s42824-020-00012-0 · Cited by 216
Korkmaz, M. E., Gupta, M. K., Robak, G., Moj, K., Krolczyk, G. M., & Kuntoğlu, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.051 · Cited by 209
Wire arc additive manufacturing (WAAM): A new process to shape engineering materials
Singh, S. R., & Khanna, P. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.08.030 · Cited by 206
Opportunities for Industry 4.0 to Support Remanufacturing
Yang, S., M. R., A. R., Kaminski, J., & Pepin, H. (2018) · Applied Sciences · doi:10.3390/app8071177 · Cited by 190
Germaini, M.-M., Belhabib, S., Guessasma, S., Deterre, R., Corre, P., & Weiss, P. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100963 · Cited by 184
Pathak, S., & Saha, G. (2017) · Coatings · doi:10.3390/coatings7080122 · Cited by 180
Component repair using laser direct metal deposition
Pinkerton, A. J., Wang, W., & Li, L. (2008) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem1008 · Cited by 179
A review on qualification and certification for metal additive manufacturing
Chen, Z., Han, C., Gao, M., Kandukuri, S. Y., & Zhou, K. (2022) · Virtual and Physical Prototyping · doi:10.1080/17452759.2021.2018938 · Cited by 178
Fused deposition modeling of patient‐specific polymethylmethacrylate implants
Espalin, D., Arcaute, K., Rodriguez, D., Medina, F., Posner, M., & Wicker, R. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011034825 · Cited by 176
Solid Freeform Fabrication Proceedings -1999
Bourell, D. L., Beaman, J. J., Jr., C., Richard H., M., Harris L., B., & Joel, W. (1999) · doi:10.21236/ada377264 · Cited by 173
Lu, H., Wu, L., Wei, H., Cai, J., Luo, K., Xu, X., & Lu, J. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102877 · Cited by 173
Additive manufacturing for in situ repair of osteochondral defects
Cohen, D. L., Lipton, J. I., Bonassar, L. J., & Lipson, H. (2010) · Biofabrication · doi:10.1088/1758-5082/2/3/035004 · Cited by 169
Prabhakar, D. A. P., Shettigar, A. K., Herbert, M. A., Chandrashekarappa, M. P. G., Pimenov, D. Y., Giasin, K., & Prakash, C. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.08.034 · Cited by 169
Gao, J., Chen, X., Yılmaz, O., & Gindy, N. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0923-6 · Cited by 166
Griffiths, R. J., Petersen, D. T., García, D., & Yu, H. Z. (2019) · Applied Sciences · doi:10.3390/app9173486 · Cited by 166
Circular economy assessment tool for end of life product recovery strategies
Alamerew, Y. A., & Brissaud, D. (2019) · Journal of Remanufacturing · doi:10.1007/s13243-018-0064-8 · Cited by 165
Laser Beam Build-Up Welding: Precision in Repair, Surface Cladding, and Direct 3D Metal Deposition
Nowotny, S., Scharek, S., Beyer, E., & Richter, K.-H. (2007) · Journal of Thermal Spray Technology · doi:10.1007/s11666-007-9028-5 · Cited by 162
A review of laser engineered net shaping (LENS) build and process parameters of metallic parts
Izadi, M., Farzaneh, A., Mohammed, M. I., Gibson, I., & Rolfe, B. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2018-0088 · Cited by 152
Remanufacturing: Trends and issues
Lee, C.-M., Woo, W.-S., & Roh, Y.-H. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0015-0 · Cited by 142
Bi, G., & Gasser, A. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.051 · Cited by 139
Laser Cladding of Vanadium-Carbide Tool Steels for Die Repair
Leunda, J., Soriano, C., Sanz, C., & Navas, V. G. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.044 · Cited by 138
Aziz, N. A., Adnan, N. A. A., Wahab, D. A., & Azman, A. H. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126401 · Cited by 138
A cloud-based approach for WEEE remanufacturing
Wang, L., Wang, X. V., Gao, L., & Váncza, J. (2014) · CIRP Annals · doi:10.1016/j.cirp.2014.03.114 · Cited by 135
Daroonparvar, M., Bakhsheshi‐Rad, H. R., Saberi, A., Razzaghi, M., Kasar, A. K., Ramakrishna, S., Menezes, P. L., Misra, M., Ismail, A. F., Sharif, S., et al. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2022.07.012 · Cited by 135
Laser Metal Deposition as Repair Technology for a Gas Turbine Burner Made of Inconel 718
Petrat, T., Graf, B., Gumenyuk, A., & Rethmeier, M. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.078 · Cited by 131
Divakaran, N. C., Das, J. P., Ajay Kumar, P., V, Mohanty, S., Ramadoss, A., & NAYAK, S. K. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.01.002 · Cited by 125
An integrated approach of reverse engineering aided remanufacturing process for worn components
Li, L., Li, C., Tang, Y. G., & Du, Y. (2017) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.02.004 · Cited by 124
Additive manufacturing using mobile robots: Opportunities and challenges for building construction
Dörfler, K., Dielemans, G., Lachmayer, L., Recker, T., Raatz, A., Lowke, D., & Gerke, M. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106772 · Cited by 124
Qi, H., Azer, M. N., & Singh, P. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2265-7 · Cited by 121
Walachowicz, F., Bernsdorf, I., Papenfuss, U., Zeller, C., Graichen, A., Navrotsky, V., Rajvanshi, N., & Kiener, C. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12637 · Cited by 117
Williams, M. B., Robinson, T. W., Williamson, C. J., Kinser, R. P., Ashmore, N. A., Allison, P., & Jordon, J. B. (2021) · Metals · doi:10.3390/met11111739 · Cited by 116
Aftermarket remanufacturing strategic planning decision-making framework: theory & practice
Subramoniam, R., Huisingh, D., & Chinnam, R. B. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.07.022 · Cited by 115
Madhu, N. R., Erfani, H., Jadoun, S., Amir, M., Thiagarajan, Y., & Chauhan, N. P. S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10048-y · Cited by 115
A digital twin ecosystem for additive manufacturing using a real-time development platform
Pantelidakis, M., Mykoniatis, K., Liu, J., & Harris, G. A. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-09164-6 · Cited by 112
Avery, D. Z., Cleek, C., Phillips, B. J., Rekha, M. Y., Kinser, R. P., Rao, H. M., Brewer, L. N., Allison, P., & Jordon, J. B. (2021) · Journal of Engineering Materials and Technology · doi:10.1115/1.4052816 · Cited by 105
Bennett, J. L., Garcia, D. J., Kendrick, M., Hartman, T., Hyatt, G., Ehmann, K. F., You, F., & Cao, J. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4042078 · Cited by 104
Hettiarachchi, B. D., Brandenburg, M., & Seuring, S. A. (2022) · International Journal of Production Economics · doi:10.1016/j.ijpe.2022.108414 · Cited by 103
Geopolymer additive manufacturing: A review
Лазоренко, Г. И., & Kasprzhitskii, A. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102782 · Cited by 102
Multi-material metallic structure fabrication using electron beam melting
Terrazas, C. A., Gaytan, S. M., Rodriguez, E., Espalin, D., Murr, L. E., Medina, F. R., & Wicker, R. B. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5449-0 · Cited by 101
Wits, W. W., García, J. R. R., & Becker, J. M. J. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.01.156 · Cited by 100
Application of High-Pressure Cold Spray for an Internal Bore Repair of a Navy Valve Actuator
Widener, C. A., Carter, M. J., Özdemir, O. Ç., et al. (2015) · Journal of Thermal Spray Technology · doi:10.1007/s11666-015-0366-4 · Cited by 99
Titanium Alloy Repair with Wire-Feed Electron Beam Additive Manufacturing Technology
Wanjara, P., Watanabe, K., de Formanoir, C., Yang, Q., Bescond, C., Godet, S., Brochu, M., Nezaki, K., Gholipour, J., & Patnaik, P. (2019) · Advances in Materials Science and Engineering · doi:10.1155/2019/3979471 · Cited by 99
Ductile and high strength Cu fabricated by solid-state cold spray additive manufacturing
Chen, C., Xie, Y., Yin, S., Li, W., Luo, X., Xie, X., Zhao, R., Deng, C., Wang, J., Liao, H., et al. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.07.003 · Cited by 95
Repairing of sintered tools using laser cladding by wire
Capello, E., Colombo, D., & Previtali, B. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.02.075 · Cited by 94
Mohankumar, A., Thirumalaikumarasamy, D., Sonar, T., Sampathkumar, D., Packkirisamy, V., & Anbarasu, M. (2022) · Journal of the Mechanical Behavior of Materials · doi:10.1515/jmbm-2022-0056 · Cited by 93
Priarone, P. C., Campatelli, G., Catalano, A. R., & Baffa, F. (2021) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2021.10.007 · Cited by 92
Challenges in the Technology Development for Additive Manufacturing in Space
Zocca, A., Wilbig, J., Waske, A., Günster, J., Widjaja, M. P., Neumann, C., Clozel, M., Meyer, A., Ding, J., Zhou, Z., et al. (2022) · Chinese Journal of Mechanical Engineering Additive Manufacturing Frontiers · doi:10.1016/j.cjmeam.2022.100018 · Cited by 91
Acharya, R., & Das, S. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2912-6 · Cited by 87
Repair of Damaged Mold Surface by Cold-Spray Method
Lee, J. C., Kang, H. J., Chu, W. S., & Ahn, S. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.05.138 · Cited by 86
Abbasi, G. A., Keong, K. Q. C., Kumar, K. M., & Iranmanesh, M. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.132137 · Cited by 85
A qualification procedure to manufacture and repair aerospace parts with electron beam melting
Portolés, L., Jordá, O., Jordá, L., Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2016) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2016.07.002 · Cited by 82
A Deep Look at Metal Additive Manufacturing Recycling and Use Tools for Sustainability Performance
Daraban, A. O., Negrea, C., Artimon, F., Angelescu, D., Gheorghe, P., Gheorghe, S., & Gheorghe, M. (2019) · Sustainability · doi:10.3390/su11195494 · Cited by 81
Reverse Engineering of Parts with Optical Scanning and Additive Manufacturing
Paulic, M., Irgolič, T., Balič, J., et al. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.03.056 · Cited by 80
Crack Repair in Aerospace Aluminum Alloy Panels by Cold Spray
Cavaliere, P. D., & Silvello, A. (2017) · Journal of Thermal Spray Technology · doi:10.1007/s11666-017-0534-9 · Cited by 80
Froend, M., Riekehr, S., Kashaev, N., Klusemann, B., & Enz, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.06.033 · Cited by 79
A review on remanufacturing assembly management and technology
Liu, C., Zhu, Q., Wei, F., Rao, W., Liu, J., Hu, J., & Cai, W. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04617-x · Cited by 77
Magnesium role in additive manufacturing of biomedical implants – Challenges and opportunities
Kaushik, V., Nithish Kumar, B., Sakthi Kumar, S., & Vignesh, M. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102802 · Cited by 76
Yu, J.-H., Choi, Y. S., Shim, D.-S., & Park, S. (2018) · Optics & Laser Technology · doi:10.1016/j.optlastec.2018.04.007 · Cited by 75
Jensen, J., Rölfing, J. D., Le, D. Q. S., Kristiansen, A. A., Nygaard, J. V., Hokland, L. B., Bendtsen, M. M., Kassem, M. S., Lysdahl, H., & Bünger, C. E. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34970 · Cited by 74
Zhang, X., Li, W., & Liou, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1413-8 · Cited by 73
Remanufacturing Process Planning
Kin, S. T. M., Ong, S. K., & Nee, A. Y. C. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.06.087 · Cited by 66
Laser cladding of the titanium alloy TI6242 to restore damaged blades
Richter, K., Orban, S., & Nowotny, S. (2004) · International Congress on Applications of Lasers & Electro-Optics (ICALEO) · doi:10.2351/1.5060222 · Cited by 66
Le, V. T., Paris, H., & Mandil, G. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.06.026 · Cited by 65
Plasma transferred arc repair welding of the nickel-base superalloy IN-738LC
Su, C. Y., Chou, C. P., Wu, B., & Lih, W. (1997) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-997-0055-7 · Cited by 63
Aircraft Skin Restoration and Evaluation
Yandouzi, M., Gaydos, S., Guo, D., Ghelichi, R., & Jodoin, B. (2014) · Journal of Thermal Spray Technology · doi:10.1007/s11666-014-0130-1 · Cited by 61
Du, Y., & Li, C. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.033 · Cited by 59
Laser reconditioning of crankshafts: From lab to application
Köhler, H., Partes, K., Seefeld, T., & Vollertsen, F. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.160 · Cited by 57
RECLAIM: Toward a New Era of Refurbishment and Remanufacturing of Industrial Equipment
Zacharaki, A., Vafeiadis, T., Kolokas, N., Vaxevani, A., Xu, Y.-C., Peschl, M., Ioannidis, D., & Tzovaras, D. (2021) · Frontiers in Artificial Intelligence · doi:10.3389/frai.2020.570562 · Cited by 56
Laser Engineered Net Shape (LENS) Technology for the Repair of Ni-Base Superalloy Turbine Components
Liu, D., Lippold, J. C., Li, J., Rohklin, S. R., Vollbrecht, J., & Grylls, R. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2397-8 · Cited by 55
Wakiru, J., Pintelon, L. M., Muchiri, P., & Chemweno, P. K. (2021) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.107872 · Cited by 55
Demystifying the digital transition of remanufacturing: A systematic review of literature
Teixeira, E. L. S., Tjahjono, B., Beltran, M., & Juli�ão, J. (2021) · Computers in Industry · doi:10.1016/j.compind.2021.103567 · Cited by 55
Diener, D. L., & Tillman, A. (2016) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2016.03.001 · Cited by 53
Zhang, X., Li, W., Cui, W., & Liou, F. (2017) · Manufacturing Letters · doi:10.1016/j.mfglet.2017.11.001 · Cited by 53
Yusoh, S. S. M., Wahab, D. A., Habeeb, H. A., & Azman, A. H. (2021) · PeerJ Computer Science · doi:10.7717/peerj-cs.808 · Cited by 51
3D printing hybrid materials using fused deposition modelling for solid oral dosage forms
Krueger, L., Miles, J. A., & Popat, A. (2022) · Journal of Controlled Release · doi:10.1016/j.jconrel.2022.09.032 · Cited by 50
Remanufacturing Process and Its Challenges
Andrew-Munot, M., & Ibrahim, R. N. (2013) · JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES · doi:10.15282/jmes.4.2013.13.0046 · Cited by 49
Phillips, C., Kortschot, M. T., & Azhari, F. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103050 · Cited by 49
Petráčková, K., Kondás, J., & Guagliano, M. (2017) · Journal of Thermal Spray Technology · doi:10.1007/s11666-017-0643-5 · Cited by 48
The role of additive manufacturing in industry 4.0: An exploration of different business models
Elhazmiri, B., Naveed, N., Anwar, M. N., & Haq, M. I. U. (2022) · Sustainable Operations and Computers · doi:10.1016/j.susoc.2022.07.001 · Cited by 45
Electron Beam Freeform Fabrication for Cost Effective Near-Net Shape Manufacturing
Taminger, K. M. B., & Hafley, R. A. (n.d.) · NASA STI Repository (National Aeronautics and Space Administration) · Cited by 44
Design and Manufacture for Sustainable Development 2004
Hon, B. (2002) · Cited by 43
Chaudhary, B., Jain, N. K., & Jayaprakash, M. (2022) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2022.04.016 · Cited by 42
Keshavarz, M. K., Gontcharov, A. B., Lowden, P., Chan, A., Kulkarni, D., & Brochu, M. (2021) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp5010021 · Cited by 40
Evaluation of Additive Friction Stir Deposition for the Repair of Cast Al-1.4Si-1.1Cu-1.5Mg-2.1Zn
Martin, L. P., Luccitti, A., & Walluk, M. R. (2021) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4052759 · Cited by 39
Oyesola, M. O., Mpofu, K., Mathe, N., et al. (2020) · Procedia Manufacturing · doi:10.1016/j.promfg.2020.07.019 · Cited by 38
Kumar, S. A., Rajkumar, V., Nagesha, B. K., Tigga, A. K., Barad, S. G., & Suresh, T. N. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.02.083 · Cited by 38
Türkcan, H., İMAMOĞLU, S. Z., & İnce, H. (2022) · International Journal of Production Economics · doi:10.1016/j.ijpe.2022.108418 · Cited by 38
A generic asset model for implementing product digital twins in smart remanufacturing
Kerin, M., Pham, D. T., Huang, J., & Hadall, J. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-09295-w · Cited by 38
Hong, X., Xiao, G., Zhang, Y., & Zhou, J. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07424-5 · Cited by 36
Additive manufacturing for repairing: from damage identification and modeling to DLD
Perini, M., Bosetti, P., & Bâlc, N. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2019-0090 · Cited by 34
Directed Energy Deposition via Artificial Intelligence‐Enabled Approaches
Chadha, U., Selvaraj, S. K., Lamsal, A. S., Maddini, Y., Ravinuthala, A. K., Choudhary, B., Mishra, A., Padala, D., Shashank, M., Lahoti, V., et al. (2022) · Complexity · doi:10.1155/2022/2767371 · Cited by 33
Process characteristics in high-precision laser metal deposition using wire and powder
Brueckner, F. P., Riede, M., Marquardt, F., Willner, R., Seidel, A., Thieme, S., Leyens, C., & Beyer, E. (2017) · Journal of Laser Applications · doi:10.2351/1.4983237 · Cited by 32
Progress in Additive Manufacturing 2020
Shamsaei, N., & Seifi, M. (2022) · doi:10.1520/stp1637-eb · Cited by 32
Rios, G. A. B. D. L., Ferreira, R., Mariani, F. E., da Silva, E. J., & Coelho, R. T. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-09179-z · Cited by 30
Maintenance Framework for Repairing Partially Damaged Parts Using 3D Printing
Kim, H., Cha, M., Kim, B. C., Lee, I., & Mun, D. (2019) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-019-00132-x · Cited by 27
Enhancement of FDM ULTEM® 9085 bond strength via atmospheric plasma treatment
McLouth, T. D., Gustafson, S. M., Kim, H. I., et al. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.04.021 · Cited by 27
Remanufacturing in the Heavy Vehicle Industry—Case Study of a Finnish Machine Manufacturer
Rönkkö, P., Ayati, M., & Majava, J. (2021) · Sustainability · doi:10.3390/su131911120 · Cited by 27
Failure Mode, Effects and Criticality Analysis of remanufactured machine tools in service
Du, Y., Liao, L., & Wang, L.-S. (2017) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-017-0051-2 · Cited by 26
Process planning of automatic wire arc additive remanufacturing for hot forging die
Zhang, J., Zhou, J., Wang, Q., Xiao, G., & Quan, G.-Z. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05766-0 · Cited by 26
Remanufacturing and Advanced Machining Processes for New Materials and Components
Gevorkyan, E. S., Rucki, M., Nerubatskyi, V. P., Żurowski, W., Siemiątkowski, Z., Morozow, D., & Kharatyan, A. G. (2022) · Taylor & Francis eBooks · doi:10.1201/9781003218654 · Cited by 26
Zhang, X., Cui, W., & Liou, F. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00291-7 · Cited by 25
Environmentally Friendly Protective Coatings for Brake Disks
Wank, A., Schmengler, C., Krause, A., Müller-Roden, K., & Wessler, T. (2022) · Journal of Thermal Spray Technology · doi:10.1007/s11666-022-01459-0 · Cited by 22
Role of Standards as an Enabler in a Digital Remanufacturing Industry
Pratapa, P., Subramoniam, R., & Gaur, J. (2022) · Sustainability · doi:10.3390/su14031643 · Cited by 21
Effect of substrate condition on wire fed electron beam additive deposition
Sikan, F., Wanjara, P., Gholipour, J., Atabay, S. E., & Brochu, M. (2022) · Materials Science and Engineering A · doi:10.1016/j.msea.2022.143448 · Cited by 21
Design for remanufacturing: What performances can be expected?
Tchertchian, N., Millet, D., & Korchi, A. E. (2012) · International Journal of Environmental Technology and Management · doi:10.1504/ijetm.2012.045151 · Cited by 20
Montero, J., Paetzold, K., Bleckmann, M., & Holtmannspötter, J. (2018) · Proceedings of the ... International Design Conference/Design ... · doi:10.21278/idc.2018.0444 · Cited by 20
Tan, K., Markovych, S., Hu, W., Шорінов, О. В., & Wang, Y. (2020) · Aerospace technic and technology · doi:10.32620/aktt.2020.3.06 · Cited by 20
Liu, H., Liu, Z., Ji, S., Yue, Y., Dong, Z., & Chen, C. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.12.010 · Cited by 18
Laser remanufacturing based on the integration of reverse engineering and laser cladding
Nan, L., Liu, W., & Zhang, K. (2010) · International Journal of Computer Applications in Technology · doi:10.1504/ijcat.2010.032200 · Cited by 17
Lahrour, Y., Brissaud, D., & Zwolinski, P. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.01.046 · Cited by 17
Du, Y., He, G., Li, B., Zhou, Z., & Wu, G. (2021) · Environment Development and Sustainability · doi:10.1007/s10668-021-01499-6 · Cited by 17
Computer-aided analysis of repair welding of stamping tools
Tušek, J., & Ivančič, R. (2004) · International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) · doi:10.3139/146.017914 · Cited by 16
Le, V. T., & Paris, H. (2016) · Lecture notes in mechanical engineering · doi:10.1007/978-3-319-45781-9_19 · Cited by 14
Wu, R., Yu, Z., Ding, D., Lu, Q., Pan, Z. S., & Li, H. (2021) · Materials · doi:10.3390/ma14061563 · Cited by 14
Chou, K., Eff, M., Cox, C., Saukas, C., & Carroll, J. W. (2022) · Data in Brief · doi:10.1016/j.dib.2022.107862 · Cited by 12
Xue, L., Li, Y., Chen, J., & Wang, S. (2015) · Volume 6: Ceramics; Controls, Diagnostics and Instrumentation; Education; Manufacturing Materials and Metallurgy; Honors and Awards · doi:10.1115/gt2015-43971 · Cited by 12
Automation in Remanufacturing: Applying Sealant on a Car Component
Hochwallner, M., Sundin, E., & Johansen, K. (2022) · Advances in transdisciplinary engineering · doi:10.3233/atde220134 · Cited by 9
A Framework for Additive Manufacturing Technology Selection: A Case for the Rail Industry
Muvunzi, R., Mpofu, K., Khodja, M., & Daniyan, I. A. (2022) · International Journal of Manufacturing Materials and Mechanical Engineering · doi:10.4018/ijmmme.302912 · Cited by 7
Part Repair using a Hybrid Manufacturing System
Eiamsa-ard, K., Nair, H. J., Ren, L., Ruan, J., Sparks, T., & Liou, F. W. (2005) · Texas Digital Library (University of Texas) · doi:10.26153/tsw/7100 · Cited by 7
Charles, A., & Taylor, C. A. G. (2017) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 5
The Remanufacture of a Complex Part Using Hybrid Manufacturing (HM))Preprint
Rios, G. A. B. D. L., Ferreira, R., Mariani, F. E., da Silva, E. J., & Coelho, R. T. (2021) · Research Square · doi:10.21203/rs.3.rs-224188/v1 · Cited by 3
Metadata
- Authors
- Kanishka, K., & Acherjee, B.
- Venue
- Journal of Manufacturing Processes
- Publisher
- Elsevier BV
- Published
- 2023-03
- Volume
- 89
- Pages
- 220-283
- ISSN
- 1526-6125 (ISSN-L)
- OpenAlex
- W4318952647
- Cited by
- 300
- References
- 156
- FWCI
- 7.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.