The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
3D printed concrete for large-scale buildings: An overview of rheology, printing parameters, chemical admixtures, reinforcements, and economic and environmental prospects
Abstract
This paper provides a comprehensive survey of current technological challenges and prospects for 3D printing technology with concrete applied to large-scale buildings. This innovative construction approach promises to revolutionize the shape of buildings with considerable time and cost savings but is still facing many technical and operational challenges. We gathered the knowledge of the most relevant and recent publications with our perception to address and discuss the main operational parameters, feasibility, and prospects for 3DPC technology. The paper is organized into five main categories: rheology of concrete for printing, effect of chemical admixtures, the role of reinforcements and inclusions, printing parameters and solutions for large-scale printers, and an analysis of economic and environmental aspects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Concrete: Microstructure, Properties, and Materials
Mehta, P. K., & Monteiro, P. J. M. (2005) · Cited by 5,607
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
"Heavy metals" a meaningless term? (IUPAC Technical Report)
Duffus, J. H. (2002) · Pure and Applied Chemistry · doi:10.1351/pac200274050793 · Cited by 1,364
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Zabalza Bribián, I., Valero Capilla, A., & Aranda Usón, A. (2011) · Building and Environment · doi:10.1016/j.buildenv.2010.12.002 · Cited by 1,287
Mix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Rheological requirements for printable concretes
Roussel, N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.005 · Cited by 1,203
Automated construction by contour crafting—related robotics and information technologies
Khoshnevis, B. (2004) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,161
Standard Test Method for Slump of Hydraulic-Cement Concrete
C09 Committee (2008) · doi:10.1520/c0143_c0143m · Cited by 1,095
Vision of 3D printing with concrete — Technical, economic and environmental potentials
De Schutter, G., Lesage, K., Mechtcherine, V., Nerella, V. N., Habert, G., & Agusti-Juan, I. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.06.001 · Cited by 1,072
Hardened properties of high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,020
A critical review of the use of 3-D printing in the construction industry
Wu, P., Wang, J., & Wang, X. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.04.005 · Cited by 1,002
Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
Building components for an outpost on the lunar soil by means of a novel 3D printing technology
Cesaretti, G., Dini, E., De Kestelier, X., Colla, V., & Pambaguian, L. (2014) · Acta Astronautica · doi:10.1016/j.actaastro.2013.07.034 · Cited by 806
Fiber-reinforced concrete: an overview after 30 years of development
Zollo, R. F. (1997) · Cement and Concrete Composites · doi:10.1016/s0958-9465(96)00046-7 · Cited by 802
Effect of surface moisture on inter-layer strength of 3D printed concrete
Sanjayan, J., Nematollahi, B., Xia, M., & Marchment, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.232 · Cited by 713
Digital Concrete: Opportunities and Challenges
Wangler, T., Lloret, E., Reiter, L., Hack, N., Gramazio, F., Kohler, M., Bernhard, M., Dillenburger, B., Buchli, J., Roussel, N., et al. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.16 · Cited by 636
Fresh and hardened properties of 3D printable cementitious materials for building and construction
Paul, S. C., Tay, Y. W. D., Panda, B., & Tan, M. J. (2018) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2017.02.008 · Cited by 633
Additive construction: State-of-the-art, challenges and opportunities
Labonnote, N., Rønnquist, A., Manum, B., & Rüther, P. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.08.026 · Cited by 607
Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC
Yazıcı, Ş., İnan, G., & Tabak, V. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.05.025 · Cited by 599
3D Printing of Buildings and Building Components as the Future of Sustainable Construction?
Hager, I., Golonka, A., & Putanowicz, R. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.07.357 · Cited by 593
Viscosity-enhancing admixtures for cement-based materials — An overview
Khayat, K. H. (1998) · Cement and Concrete Composites · doi:10.1016/s0958-9465(98)80006-1 · Cited by 568
Marchon, D., Kawashima, S., Bessaies-Bey, H., Mantellato, S., & Ng, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.014 · Cited by 507
García de Soto, B., Agustí-Juan, I., Hunhevicz, J., Joss, S., Graser, K., Habert, G., & Adey, B. T. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.04.004 · Cited by 474
(1986) · Cement and Concrete Research · doi:10.1016/0008-8846(86)90081-5 · Cited by 471
Properties of 3D-printed fiber-reinforced Portland cement paste
Hambach, M., & Volkmer, D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.02.001 · Cited by 470
Prediction of compressive strength of concrete by neural networks
Ni, H.-G., & Wang, J.-Z. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00345-8 · Cited by 466
Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing
Mechtcherine, V., Nerella, V. N., Will, F., Näther, M., Otto, J., & Krause, M. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.102933 · Cited by 455
Particle-bed 3D printing in concrete construction – Possibilities and challenges
Lowke, D., Dini, E., Perrot, A., Weger, D., Gehlen, C., & Dillenburger, B. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.018 · Cited by 447
Flexural strength and porosity of cements
Birchall, J. D., Howard, A. J., & Kendall, K. (1981) · Nature · doi:10.1038/289388a0 · Cited by 438
The role of early age structural build-up in digital fabrication with concrete
Reiter, L., Wangler, T., Roussel, N., & Flatt, R. J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.011 · Cited by 432
3D printing of reinforced concrete elements: Technology and design approach
Asprone, D., Auricchio, F., Menna, C., & Mercuri, V. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.018 · Cited by 413
Rethinking reinforcement for digital fabrication with concrete
Asprone, D., Menna, C., Bos, F. P., Salet, T. A. M., Mata-Falcón, J., & Kaufmann, W. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.020 · Cited by 385
Mega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378
3D Printing of Buildings: Construction of the Sustainable Houses of the Future by BIM
Sakin, M., & Kiroglu, Y. C. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.09.562 · Cited by 372
Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete
Zareiyan, B., & Khoshnevis, B. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.08.019 · Cited by 353
Chemistry and Technology of Surfactants
(2006) · Wiley eBooks · doi:10.1002/9780470988596 · Cited by 347
Chemical Admixtures for Concrete
(1989) · ACI Materials Journal · doi:10.14359/2460 · Cited by 342
Mechtcherine, V., Grafe, J., Nerella, V. N., Spaniol, E., Hertel, M., & Füssel, U. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.202 · Cited by 332
A self-reinforced cementitious composite for building-scale 3D printing
Soltan, D. G., & Li, V. C. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.017 · Cited by 330
Rheology of fiber reinforced cementitious materials: classification and prediction
Martinie, L., Rossi, P., & Roussel, N. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.08.032 · Cited by 312
Chemical Admixtures for Concrete
Mailvaganam, N. P., Rixom, M. R., Manson, D. P., & Gonzales, C. (1999) · CRC Press eBooks · doi:10.4324/9780203017241 · Cited by 304
Understanding expansion in calcium sulfoaluminate–belite cements
Chen, I. A., Hargis, C. W., & Juenger, M. C. G. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.07.010 · Cited by 287
Environmental design guidelines for digital fabrication
Agustí-Juan, I., & Habert, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.190 · Cited by 250
Workability and Quality Control of Concrete
Tattersall, G. H. (1991) · CRC Press eBooks · doi:10.1201/9781482267006 · Cited by 228
Khoshnevis, B., & Dutton, R. (1998) · Materials Technology · doi:10.1080/10667857.1998.11752766 · Cited by 207
Sánchez-Martín, M. J., Dorado, M. C., del Hoyo, C., & Rodríguez-Cruz, M. S. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.04.093 · Cited by 200
How 3D printing technology changes the rules of the game: Insights from the construction sector
Kothman, I., & Faber, N. R. (2016) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-01-2016-0010 · Cited by 174
Workability and Quality Control of Concrete
(1991) · Taylor & Francis eBooks · doi:10.4324/9780203473146 · Cited by 163
Ji, G., Ding, T., Xiao, J., Du, S., Li, J., & Duan, Z. (2019) · Materials · doi:10.3390/ma12091540 · Cited by 135
Güneyisi, E., Atewi, Y. R., & Hasan, M. F. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.087 · Cited by 113
Taylor, P. C., Kosmatka, S. H., & Voigt, G. F. (2006) · ROSA P · Cited by 110
Experimental and numerical investigation on postcracking behavior of steel fiber reinforced concrete
Michels, J., Christen, R., & Waldmann, D. (2012) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2012.11.004 · Cited by 104
Malaeb, Z., Alsakka, F., & Hamzeh, F. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815481-6.00006-3 · Cited by 99
Magnetic orientation of steel fibres in self-compacting concrete beams: Effect on failure behaviour
Wijffels, M. J. H., Wolfs, R. J. M., Suiker, A. S. J., & Salet, T. A. M. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.04.005 · Cited by 92
Rheological and mechanical properties of hybrid fiber reinforced cement mortar
Cao, M., Xu, L., & Zhang, C. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.09.054 · Cited by 88
Plastic Shrinkage Cracking of Polypropylene Fiber Reinforced Concrete
Soroushian, P., Mirza, F., & Alhozajiny, A. (1993) · ACI Materials Journal · doi:10.14359/894 · Cited by 75
Souza, M. T., Simão, L., Montedo, O. R. K., Pereira, F. R., & de Oliveira, A. P. N. (2018) · Waste Management · doi:10.1016/j.wasman.2018.12.003 · Cited by 63
Self-citationThe role of phosphonates in the hydration of Portland cement
Ramachandran, V. S., Lowery, M. S., Wise, T., et al. (1993) · Materials and Structures · doi:10.1007/bf02472943 · Cited by 62
3D Printing and Buildings: A Technology Review and Future Outlook
Yin, H., Qu, M., Zhang, H., & Lim, Y. (2018) · Technology|Architecture + Design · doi:10.1080/24751448.2018.1420968 · Cited by 58
Liu, Z., Li, M., Tay, Y. W. D., Weng, Y., Wong, T. N., & Tan, M. J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101190 · Cited by 55
The cost calculation method of construction 3D printing aligned with internet of things
Yang, H., Chung, J. K. H., Chen, Y., & Li, Y. (2018) · EURASIP Journal on Wireless Communications and Networking · doi:10.1186/s13638-018-1163-9 · Cited by 35
Applications of Additive Manufacturing
Gebhardt, A., Kessler, J., & Thurn, L. K. (2018) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.3139/9781569907030.004 · Cited by 6
Cited by
Large-scale 3D printing concrete technology: Current status and future opportunities
Xiao, J., Ji, G., Zhang, Y., Ma, G., Mechtcherine, V., Pan, J., Wang, L., Ding, T., Duan, Z., & Du, S. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104115 · Cited by 532
Sustainable materials for 3D concrete printing
Bhattacherjee, S., Basavaraj, A. S., Rahul, A. V., Santhanam, M., Gettu, R., Panda, B., Schlangen, E., Chen, Y., Copuroglu, O., Ma, G., et al. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104156 · Cited by 321
Metadata
- Authors
- Souza, M. T., Ferreira, I. M., Guzi de Moraes, E., Senff, L., & Novaes de Oliveira, A. P.
- Venue
- Journal of Building Engineering
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 32
- Pages
- 101833
- ISSN
- 2352-7102 (ISSN-L)
- OpenAlex
- W3087555034
- Cited by
- 268
- References
- 66
- FWCI
- 17.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.