3D-printed biodegradable gyroid scaffolds for tissue engineering applications
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Abstract Fused deposition modeling (FDM), a low-cost and easy-to-use additive manufacturing technique, was used to produce poly(lactic acid) (PLA) gyroid scaffolds. Such morphology was selected for its spring shape, high porosity leading to good nutrient and waste diffusion, and favorable mechanical properties. Printing parameters were optimized and the need of a support material to improve printing was evidenced. The gyroid was compared to the common strut-based structure. Scaffold porosity was measured by micro-CT, and mechanical properties were determined by compression tests, taking into account the effect of geometry, printing resolution, and PLA crystallinity. The impact of scaffold geometry and crystallinity on its degradation was studied in vitro. Porosity of the gyroid structure was 71%, as expected from the printing model. The compression tests showed an isotropic behavior for the gyroid, in contrast with the strut-based scaffold. Upon aging in physiological conditions, gyroid scaffolds retained their integrity during 64 weeks, while control scaffolds lost struts starting from week 33, in a way that depended on crystallinity and printing resolution. Based on these results, the gyroid design is proposed as a suitable mesh architecture for tissue engineering scaffolds that can be elaborated using FDM techniques, to produce low-cost and personalized implants.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Fibrin: A versatile scaffold for tissue engineering applications
Ahmed, T. A. E., Dare, E. V., & Hincke, M. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2007.0435 · Cited by 994
Evaluations of cellular lattice structures manufactured using selective laser melting
Yan, C., Hao, L., Hussein, A., & Raymont, D. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.06.002 · Cited by 730
Biomimetic 3D tissue printing for soft tissue regeneration
Pati, F., Ha, D.-H., Jang, J., Han, H. H., Rhie, J.-W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.043 · Cited by 368
Relevance of PEG in PLA-based blends for tissue engineering 3D-printed scaffolds
Serra, T., Ortiz-Hernandez, M., Engel, E., Planell, J. A., & Navarro, M. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.003 · Cited by 206
Differentiation Patterns of Embryonic Stem Cells in Two- versus Three-Dimensional Culture
Pineda, E. T., Nerem, R. M., & Ahsan, T. (2013) · Cells Tissues Organs · doi:10.1159/000346166 · Cited by 77
Accelerated in vitro degradation properties of polylactic acid/phosphate glass fibre composites
Felfel, R. M., Hossain, K. M. Z., Parsons, A. J., Rudd, C. D., & Ahmed, I. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-8946-8 · Cited by 61
Cited by
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Baptista, R., & Guedes, M. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.111528 · Cited by 157
Biodegradable Medical Implants: Reshaping Future Medical Practice
Xia, B., Liu, Y., Xing, Y., Shi, Z., & Pan, X. (2025) · Advanced Science · doi:10.1002/advs.202508014 · Cited by 64
Metadata
- Authors
- Germain, L., Fuentes, C. A., van Vuure, A. W., des Rieux, A., & Dupont-Gillain, C.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 151
- Pages
- 113-122
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2800085388
- Cited by
- 127
- References
- 8
- FWCI
- 4.62
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D-printed biodegradable gyroid scaffolds for tissue engineering applications. https://app.cochat.ai/papers/10.1016/j.matdes.2018.04.037
- The paper
- Germain, L., Fuentes, C. A., van Vuure, A. W., des Rieux, A., & Dupont-Gillain, C. (2018). 3D-printed biodegradable gyroid scaffolds for tissue engineering applications. Materials & Design. https://doi.org/10.1016/j.matdes.2018.04.037
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.