The DOI matches its Crossref record; 166 of the 166 references it cites were found in a registry or an index.
Polymer nanotechnology: Nanocomposites
Open accessAbstract
In the large field of nanotechnology, polymer matrix based nanocomposites have become a prominent area of current research and development. Exfoliated clay-based nanocomposites have dominated the polymer literature but there are a large number of other significant areas of current and emerging interest. This review will detail the technology involved with exfoliated clay-based nanocomposites and also include other important areas including barrier properties, flammability resistance, biomedical applications, electrical/electronic/optoelectronic applications and fuel cell interests. The important question of the “nano-effect” of nanoparticle or fiber inclusion relative to their larger scale counterparts is addressed relative to crystallization and glass transition behavior. Of course, other polymer (and composite)-based properties derive benefits from nanoscale filler or fiber addition and these are addressed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
Carbon Nanotubes--the Route Toward Applications
Baughman, R. H., Zakhidov, A. A., & de Heer, W. A. (2002) · Science · doi:10.1126/science.1060928 · Cited by 10,267
Average stress in matrix and average elastic energy of materials with misfitting inclusions
Mori, T., & Tanaka, K. (1973) · Acta Metallurgica · doi:10.1016/0001-6160(73)90064-3 · Cited by 8,189
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Synthesis and surface engineering of iron oxide nanoparticles for biomedical applications
Gupta, A. K., & Gupta, M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.012 · Cited by 6,771
Nanotube Molecular Wires as Chemical Sensors
Kong, J., Franklin, N. R., Zhou, C., Chapline, M. G., Peng, S., Cho, K., & Dai, H. (2000) · Science · doi:10.1126/science.287.5453.622 · Cited by 6,043
Hybrid Nanorod-Polymer Solar Cells
Huynh, W. U., Dittmer, J. J., & Alivisatos, A. P. (2002) · Science · doi:10.1126/science.1069156 · Cited by 5,014
Polymer Layered Silicate Nanocomposites
Giannelis, E. P. (1996) · Advanced Materials · doi:10.1002/adma.19960080104 · Cited by 3,479
Correlation of separation factor versus permeability for polymeric membranes
Robeson, L. M. (1991) · Journal of Membrane Science · doi:10.1016/0376-7388(91)80060-j · Cited by 3,465
Self-citationPolymer Nanocomposites Containing Carbon Nanotubes
Moniruzzaman, M., & Winey, K. I. (2006) · Macromolecules · doi:10.1021/ma060733p · Cited by 3,416
The Halpin‐Tsai equations: A review
Affdl, J. C. H., & Kardos, J. L. (1976) · Polymer Engineering & Science · doi:10.1002/pen.760160512 · Cited by 3,071
An Introduction to Clay Colloid Chemistry
OLPHEN, H. V. (1964) · Soil Science · doi:10.1097/00010694-196404000-00013 · Cited by 2,573
Polymer-layered silicate nanocomposites: an overview
LeBaron, P. (1999) · Applied Clay Science · doi:10.1016/s0169-1317(99)00017-4 · Cited by 2,504
Hussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. (2006) · Journal of Composite Materials · doi:10.1177/0021998306067321 · Cited by 2,227
A Chemical Route to Graphene for Device Applications
Gilje, S., Han, S., Wang, M., Wang, K. L., & Kaner, R. B. (2007) · Nano Letters · doi:10.1021/nl0717715 · Cited by 1,966
Chung, T.-S., Jiang, L. Y., Li, Y., & Kulprathipanja, S. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.008 · Cited by 1,781
Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites
Sandler, J. K. W., Kirk, J. E., Kinloch, I. A., Shaffer, M. S. P., & Windle, A. H. (2003) · Polymer · doi:10.1016/s0032-3861(03)00539-1 · Cited by 1,699
Strong, Transparent, Multifunctional, Carbon Nanotube Sheets
Zhang, M., Fang, S., Zakhidov, A. A., Lee, S. B., Aliev, A. E., Williams, C. D., Atkinson, K. R., & Baughman, R. H. (2005) · Science · doi:10.1126/science.1115311 · Cited by 1,667
Preparation and Mechanical Properties of Polypropylene−Clay Hybrids
Kawasumi, M., Hasegawa, N., Kato, M., Usuki, A., & Okada, A. (1997) · Macromolecules · doi:10.1021/ma961786h · Cited by 1,386
Polymer–Clay Nanocomposites: Synthesis and Properties
Qutubuddin, S., & Fu, X. (2001) · Nano-Surface Chemistry · doi:10.1201/9780203908488.ch17 · Cited by 1,320
Organic/Inorganic Hybrid Network Materials by the Sol−Gel Approach
Wen, J., & Wilkes, G. L. (1996) · Chemistry of Materials · doi:10.1021/cm9601143 · Cited by 1,170
Vaia, R. A., Ishii, H., & Giannelis, E. P. (1993) · Chemistry of Materials · doi:10.1021/cm00036a004 · Cited by 1,145
Modeling the Barrier Properties of Polymer-Layered Silicate Nanocomposites
Bharadwaj, R. K. (2001) · Macromolecules · doi:10.1021/ma010780b · Cited by 1,128
Models for the Permeability of Filled Polymer Systems
Nielsen, L. E. (1967) · Journal of Macromolecular Science: Part A - Chemistry · doi:10.1080/10601326708053745 · Cited by 1,127
Nylon 6 nanocomposites: the effect of matrix molecular weight
Fornes, T. D., Yoon, P. J., Keskkula, H., & Paul, D. R. (2001) · Polymer · doi:10.1016/s0032-3861(01)00552-3 · Cited by 1,125
Self-citationPinnavaia, T. J., & Beall, G. W. (2000) · Wiley eBooks · Cited by 1,102
Nylon 6 nanocomposites by melt compounding
Cho, J. W., & Paul, D. R. (2001) · Polymer · doi:10.1016/s0032-3861(00)00380-3 · Cited by 1,045
Self-citationUltrapermeable, Reverse-Selective Nanocomposite Membranes
Merkel, T. C., Freeman, B. D., Spontak, R. J., He, Z., Pinnau, I., Meakin, P., & Hill, A. J. (2002) · Science · doi:10.1126/science.1069580 · Cited by 1,039
Thermal Degradation Chemistry of Alkyl Quaternary Ammonium Montmorillonite
Xie, W., Gao, Z., Pan, W.-P., Hunter, D., Singh, A., & Vaia, R. (2001) · Chemistry of Materials · doi:10.1021/cm010305s · Cited by 1,034
Vaia, R. A., & Giannelis, E. P. (1997) · Macromolecules · doi:10.1021/ma9603488 · Cited by 1,007
Modeling properties of nylon 6/clay nanocomposites using composite theories
Fornes, T. D., & Paul, D. R. (2003) · Polymer · doi:10.1016/s0032-3861(03)00471-3 · Cited by 990
Self-citationEffect of melt processing conditions on the extent of exfoliation in organoclay-based nanocomposites
Dennis, H. R., Hunter, D. L., Chang, D., Kim, S., White, J. L., Cho, J. W., & Paul, D. R. (2001) · Polymer · doi:10.1016/s0032-3861(01)00473-6 · Cited by 966
Self-citationAlt, V., Bechert, T., Steinrücke, P., Wagener, M., Seidel, P., Dingeldein, E., Domann, E., & Schnettler, R. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.078 · Cited by 952
Interlayer Structure and Molecular Environment of Alkylammonium Layered Silicates
Vaia, R. A., Teukolsky, R. K., & Giannelis, E. P. (1994) · Chemistry of Materials · doi:10.1021/cm00043a025 · Cited by 902
Zaidi, S. M. J., Mikhailenko, S. D., Robertson, G. P., Guiver, M. D., & Kaliaguine, S. (2000) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00345-8 · Cited by 897
Crystallization behavior of nylon 6 nanocomposites
Fornes, T. D., & Paul, D. R. (2003) · Polymer · doi:10.1016/s0032-3861(03)00344-6 · Cited by 893
Self-citationSynthesis of nylon 6–clay hybrid by montmorillonite intercalated with ϵ‐caprolactam
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1993.080310418 · Cited by 893
Direct Fabrication and Harvesting of Monodisperse, Shape-Specific Nanobiomaterials
Rolland, J. P., Maynor, B. W., Euliss, L. E., Exner, A. E., Denison, G. M., & DeSimone, J. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja051977c · Cited by 852
Lattice Model of Polymer Melt Intercalation in Organically-Modified Layered Silicates
Vaia, R. A., & Giannelis, E. P. (1997) · Macromolecules · doi:10.1021/ma9514333 · Cited by 827
Schaefer, D. W., & Justice, R. S. (2007) · Macromolecules · doi:10.1021/ma070356w · Cited by 789
Rheology of End-Tethered Polymer Layered Silicate Nanocomposites
Krishnamoorti, R., & Giannelis, E. P. (1997) · Macromolecules · doi:10.1021/ma960550a · Cited by 779
Studies on nylon 6/clay nanocomposites by melt-intercalation process
Liu, L., Qi, Z., & Zhu, X. (1999) · Journal of Applied Polymer Science · Cited by 743
Multiscale micromechanical modeling of polymer/clay nanocomposites and the effective clay particle
Sheng, N., Boyce, M. C., Parks, D. M., Rutledge, G. C., Abes, J. I., & Cohen, R. E. (2004) · Polymer · doi:10.1016/j.polymer.2003.10.100 · Cited by 694
Kinetics of Polymer Melt Intercalation
Vaia, R. A., Jandt, K. D., Kramer, E. J., & Giannelis, E. P. (1995) · Macromolecules · doi:10.1021/ma00128a016 · Cited by 665
Hasegawa, N., Kawasumi, M., Kato, M., Usuki, A., & Okada, A. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980103)67:1<87::aid-app10>3.0.co;2-2 · Cited by 662
Sinha Ray, S., Okamoto, K., & Okamoto, M. (2003) · Macromolecules · doi:10.1021/ma021728y · Cited by 636
Morgan, A. B., & Gilman, J. W. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.11884 · Cited by 626
Effect of organoclay structure on nylon 6 nanocomposite morphology and properties
Fornes, T. D., Yoon, P. J., Hunter, D. L., Keskkula, H., & Paul, D. R. (2002) · Polymer · doi:10.1016/s0032-3861(02)00400-7 · Cited by 621
Self-citationVery Low Conductivity Threshold in Bulk Isotropic Single‐Walled Carbon Nanotube–Epoxy Composites
Bryning, M. B., Islam, M. F., Kikkawa, J. M., & Yodh, A. G. (2005) · Advanced Materials · doi:10.1002/adma.200401649 · Cited by 608
Characterization and modeling of mechanical behavior of polymer/clay nanocomposites
Luo, J. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00060-5 · Cited by 601
Tailoring mixed matrix composite membranes for gas separations
Zimmerman, C. M., Singh, A., & Koros, W. J. (1997) · Journal of Membrane Science · doi:10.1016/s0376-7388(97)00194-4 · Cited by 587
An, K. H., Jeong, S. Y., Hwang, H. R., & Lee, Y. H. (2004) · Advanced Materials · doi:10.1002/adma.200306176 · Cited by 525
Vaia, R. A., Jandt, K. D., Kramer, E. J., & Giannelis, E. P. (1996) · Chemistry of Materials · doi:10.1021/cm960102h · Cited by 521
Ali, S. R., Ma, Y., Parajuli, R. R., Balogun, Y., Lai, W. Y.-C., & He, H. (2007) · Analytical Chemistry · doi:10.1021/ac062068o · Cited by 486
Polymer Nanocomposites with Prescribed Morphology: Going beyond Nanoparticle-Filled Polymers
Vaia, R. A., & Maguire, J. F. (2007) · Chemistry of Materials · doi:10.1021/cm062693+ · Cited by 481
Kim, H.-W., Kim, H.-E., & Salih, V. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.01.047 · Cited by 471
Flame retardant mechanism of polyamide 6–clay nanocomposites
Kashiwagi, T., Harris, R. H., Zhang, X., Briber, R. M., Cipriano, B. H., Raghavan, S. R., Awad, W. H., & Shields, J. R. (2004) · Polymer · doi:10.1016/j.polymer.2003.11.036 · Cited by 461
Polymer electrolyte membranes for the direct methanol fuel cell: A review
DeLuca, N. W., & Elabd, Y. A. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20861 · Cited by 459
Modes of Crystallization in Block Copolymer Microdomains: Breakout, Templated, and Confined
Loo, Y.-L., Register, R. A., & Ryan, A. J. (2002) · Macromolecules · doi:10.1021/ma011824j · Cited by 453
One‐pot synthesis of nylon 6–clay hybrid
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1993.080310714 · Cited by 433
Crystallization Behavior and Morphology of Biodegradable Polylactide/Layered Silicate Nanocomposite
Nam, J. Y., Sinha Ray, S., & Okamoto, M. (2003) · Macromolecules · doi:10.1021/ma034623j · Cited by 429
Rittigstein, P., & Torkelson, J. M. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20925 · Cited by 425
Nanocomposites formed from linear low density polyethylene and organoclays
Hotta, S., & Paul, D. R. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.059 · Cited by 423
Self-citationOrgano-Clay Complexes and Interactions
(2001) · CRC Press eBooks · doi:10.1201/9781482270945 · Cited by 422
Kashiwagi, T., Du, F., Winey, K. I., Groth, K. M., Shields, J. R., Bellayer, S. P., Kim, H., & Douglas, J. F. (2005) · Polymer · doi:10.1016/j.polymer.2004.10.087 · Cited by 419
A rheological method to compare the degree of exfoliation of nanocomposites
Wagener, R., & Reisinger, T. J. G. (2003) · Polymer · doi:10.1016/j.polymer.2003.01.001 · Cited by 419
Mechanical Properties and Structure of Polymer−Clay Nanocomposite Gels with High Clay Content
Haraguchi, K., & Li, H. (2006) · Macromolecules · doi:10.1021/ma052468y · Cited by 411
Polymeric Nanocomposites for Automotive Applications
Garcés, J. M., Moll, D. J., Bicerano, J., Fibiger, R., & McLeod, D. G. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1835::aid-adma1835>3.0.co;2-t · Cited by 399
Morgan, A. B. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.685 · Cited by 388
The antimicrobial efficacy of polyamide 6/silver-nano- and microcomposites
Damm, C., Münstedt, H., & Rösch, A. (2008) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2007.09.002 · Cited by 380
Polyimide/POSS nanocomposites: interfacial interaction, thermal properties and mechanical properties
Huang, J.-C., He, C.-B., Xiao, Y., Mya, K. Y., Dai, J., & Siow, Y. P. (2003) · Polymer · doi:10.1016/s0032-3861(03)00434-8 · Cited by 372
Khatua, B. B., Lee, D. J., Kim, H. Y., & Kim, J. K. (2004) · Macromolecules · doi:10.1021/ma0352072 · Cited by 365
Thermal Stability of Quaternary Phosphonium Modified Montmorillonites
Xie, W., Xie, R., Pan, W., Hunter, D., Koene, B. E., Tan, L., & Vaia, R. A. (2002) · Chemistry of Materials · doi:10.1021/cm020705v · Cited by 365
Feng, X., Mao, C., Yang, G., Hou, W., & Zhu, J.-J. (2006) · Langmuir · doi:10.1021/la053403r · Cited by 351
Kim, Y. S., Wang, F., Hickner, M., Zawodzinski, T. A., & McGrath, J. E. (2003) · Journal of Membrane Science · doi:10.1016/s0376-7388(02)00507-0 · Cited by 348
Husain, S., & Koros, W. J. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.11.016 · Cited by 339
Rational Design of Nanocomposites for Barrier Applications
Gusev, A. A., & Lusti, H. R. (2001) · Advanced Materials · doi:10.1002/1521-4095(200111)13:21<1641::aid-adma1641>3.0.co;2-p · Cited by 338
Compatibilizing Bulk Polymer Blends by Using Organoclays
Si, M., Araki, T., Ade, H., Kilcoyne, A. L. D., Fisher, R., Sokolov, J. C., & Rafailovich, M. H. (2006) · Macromolecules · doi:10.1021/ma060125+ · Cited by 332
Polymer Crystallization in 25-nm Spheres
Loo, Y.-L., Register, R. A., & Ryan, A. J. (2000) · Physical Review Letters · doi:10.1103/physrevlett.84.4120 · Cited by 329
Picard, E., Vermogen, A., Gérard, J., & Espuche, É. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.01.030 · Cited by 329
Lincoln, D. M., Vaia, R. A., Wang, Z.-G., & Hsiao, B. S. (2001) · Polymer · doi:10.1016/s0032-3861(00)00414-6 · Cited by 326
Nylon-6 Nanocomposites from Alkylammonium-Modified Clay: The Role of Alkyl Tails on Exfoliation
Fornes, T. D., Hunter, D. L., & Paul, D. R. (2004) · Macromolecules · doi:10.1021/ma0305481 · Cited by 323
Self-citationNew polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties
Sinha Ray, S., Yamada, K., Okamoto, M., Fujimoto, Y., Ogami, A., & Ueda, K. (2003) · Polymer · doi:10.1016/j.polymer.2003.08.021 · Cited by 317
Li, L., Li, C. Y., Ni, C., Rong, L., & Hsiao, B. (2007) · Polymer · doi:10.1016/j.polymer.2007.04.030 · Cited by 317
Kongkanand, A., Kuwabata, S., Girishkumar, G., & Kamat, P. (2006) · Langmuir · doi:10.1021/la052753a · Cited by 308
Compatibilization of Immiscible Poly(propylene)/Polystyrene Blends Using Clay
Wang, Y., Zhang, Q., & Fu, Q. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200390026 · Cited by 299
Lee, Y. H., Lee, J. H., An, I.-G., Kim, C., Lee, D. S., Lee, Y. K., & Nam, J.-D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.08.018 · Cited by 296
Barrier properties of oriented disk composites
Fredrickson, G. H., & Bicerano, J. (1999) · The Journal of Chemical Physics · doi:10.1063/1.477829 · Cited by 291
Nanoscopic-Confinement Effects on Local Dynamics
Anastasiadis, S. H., Karatasos, K., Vlachos, G., Manias, E., & Giannelis, E. P. (2000) · Physical Review Letters · doi:10.1103/physrevlett.84.915 · Cited by 291
Synthesis of an intercalated compound of montmorillonite and 6-polyamide
Fukushima, Y., & Inagaki, S. (1987) · Journal of Inclusion Phenomena · doi:10.1007/bf00664105 · Cited by 291
Polymer Nanocomposites for Biomedical Applications
Hule, R. A., & Pochan, D. J. (2007) · MRS Bulletin · doi:10.1557/mrs2007.235 · Cited by 290
Yang, C., Srinivasan, S., Aricò, A. S., Cretı̀, P., Baglio, V., & Antonucci, V. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1353157 · Cited by 284
TPO based nanocomposites. Part 1. Morphology and mechanical properties
Lee, H.-S., Fasulo, P. D., Rodgers, W. R., & Paul, D. R. (2005) · Polymer · doi:10.1016/j.polymer.2005.09.068 · Cited by 284
Self-citationHeinz, H., Vaia, R. A., Krishnamoorti, R., & Farmer, B. L. (2007) · Chemistry of Materials · doi:10.1021/cm062019s · Cited by 273
Baibarac, M., & Gómez-Romero, P. (2006) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2006.903 · Cited by 268
Davis, C. H., Mathias, L. J., Gilman, J. W., Schiraldi, D. A., Shields, J. R., Trulove, P. C., Sutto, T. E., & DeLong, H. C. (2002) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10331 · Cited by 264
Jiang, R., Kunz, H. R., & Fenton, J. M. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.07.026 · Cited by 261
Comparison of nanocomposites based on nylon 6 and nylon 66
Chavarria, F., & Paul, D. R. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.074 · Cited by 261
Self-citationFire Retardant Halogen−Antimony−Clay Synergism in Polypropylene Layered Silicate Nanocomposites
Zanetti, M., Camino, G., Canavese, D., Morgan, A. B., Lamelas, F. J., & Wilkie, C. A. (2002) · Chemistry of Materials · doi:10.1021/cm011124t · Cited by 247
Some comments on the main fire retardancy mechanisms in polymer nanocomposites
Schartel, B., Bartholmai, M., & Knoll, U. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.792 · Cited by 241
Gas barrier properties of butyl rubber/vermiculite nanocomposite coatings
Takahashi, S., Goldberg, H. A., Feeney, C. A., Karim, D. P., Farrell, M., O'Leary, K. A., & Paul, D. R. (2006) · Polymer · doi:10.1016/j.polymer.2006.02.077 · Cited by 240
Self-citationXu, D., & Wang, Z. (2007) · Polymer · doi:10.1016/j.polymer.2007.11.041 · Cited by 218
Pluta, M., Jeszka, J. K., & Boiteux, G. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.04.009 · Cited by 217
Novel morphologies of poly(phenylene oxide) (PPO)/polyamide 6 (PA6) blend nanocomposites
Li, Y., & Shimizu, H. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.018 · Cited by 210
Possible exploitation of magnetic nanoparticle–cell interaction for biomedical applications
Berry, C. C. (2005) · J. Mater. Chem. · doi:10.1039/b409715g · Cited by 209
Fragiadakis, D., & Pissis, P. (2007) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2007.05.183 · Cited by 202
The discovery of polymer‐clay hybrids
Kawasumi, M. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10961 · Cited by 200
Processing degradation of polyamide 6/montmorillonite clay nanocomposites and clay organic modifier
Davis, R. D., Gilman, J. W., & VanderHart, D. L. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00263-x · Cited by 192
Kim, D. H., Fasulo, P. D., Rodgers, W. R., & Paul, D. R. (2007) · Polymer · doi:10.1016/j.polymer.2007.07.011 · Cited by 192
Self-citationEvaluation of the Structure and Dispersion in Polymer-Layered Silicate Nanocomposites
Vermogen, A., Masenelli-Varlot, K., Séguéla, R., Duchet-Rumeau, J., Boucard, S., & Prele, P. (2005) · Macromolecules · doi:10.1021/ma051249+ · Cited by 191
Crystalline Structures, Melting, and Crystallization of Linear Polyethylene in Cylindrical Nanopores
Shin, K., Woo, E., Jeong, Y. G., Kim, C., Huh, J., & Kim, K.-W. (2007) · Macromolecules · doi:10.1021/ma070994e · Cited by 190
Synthesis of Polycarbonate-Layered Silicate Nanocomposites via Cyclic Oligomers
Huang, X., Lewis, S. P., Brittain, W. J., & Vaia, R. A. (2000) · Macromolecules · doi:10.1021/ma991709x · Cited by 187
Elastic Properties of a Single Lamella of Montmorillonite by Molecular Dynamics Simulation
Manevitch, O. L., & Rutledge, G. C. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp0302818 · Cited by 184
Park, J. H., Lim, Y. T., Park, O. O., Kim, J. K., Yu, J.-W., & Kim, Y. (2004) · Chemistry of Materials · doi:10.1021/cm0304142 · Cited by 184
The effect of particle shape on the mechanical properties of filled polymers
Chow, T. S. (1980) · Journal of Materials Science · doi:10.1007/bf00550613 · Cited by 178
Intercalation Kinetics of Long Polymers in 2 nm Confinements
Manias, E., Chen, H., Krishnamoorti, R., Genzer, J., Kramer, E. J., & Giannelis, E. P. (2000) · Macromolecules · doi:10.1021/ma0009552 · Cited by 172
Nafion®/clay-SO3H membrane for proton exchange membrane fuel cell application
Bébin, P., Caravanier, M., & Galiano, H. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.10.042 · Cited by 169
VanderHart, D. L., Asano, A., & Gilman, J. W. (2001) · Macromolecules · doi:10.1021/ma002089z · Cited by 168
Chavarria, F., & Paul, D. R. (2006) · Polymer · doi:10.1016/j.polymer.2006.08.067 · Cited by 164
Self-citationShi, X., & Gan, Z. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.09.024 · Cited by 159
New Polylactide/Layered Silicate Nanocomposite: Nanoscale Control Over Multiple Properties
Ray, S. S., Yamada, K., Ogami, A., Okamoto, M., & Ueda, K. (2002) · Macromolecular Rapid Communications · doi:10.1002/1521-3927(200211)23:16<943::aid-marc943>3.0.co;2-f · Cited by 158
Nylon 6 nanocomposites prepared by a melt mixing masterbatch process
Shah, R. K., & Paul, D. R. (2004) · Polymer · doi:10.1016/j.polymer.2004.02.058 · Cited by 155
Self-citationMaio, E. D., Iannace, S., Sorrentino, L., & Nicolais, L. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.037 · Cited by 155
Ray, S. S., & Bousmina, M. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200400586 · Cited by 155
Compatibilizing Poly(vinylidene fluoride)/Nylon-6 Blends with Nanoclay
Vo, L. T., & Giannelis, E. P. (2007) · Macromolecules · doi:10.1021/ma071508q · Cited by 154
Woo, E., Huh, J., Jeong, Y. G., & Shin, K. (2007) · Physical Review Letters · doi:10.1103/physrevlett.98.136103 · Cited by 152
Liang, Z., Dzienis, K. L., Xu, J., & Wang, Q. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500334 · Cited by 139
X‐ray powder diffraction of polymer/layered silicate nanocomposites: Model and practice
Vaia, R. A., & Liu, W. (2002) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10214 · Cited by 138
Kim, J., Koros, W. J., & Paul, D. R. (2006) · Polymer · doi:10.1016/j.polymer.2006.02.083 · Cited by 136
Self-citationThe role of matrix molecular weight in rubber toughened nylon 6 blends: 1. Morphology
Oshinski, A. J., Keskkula, H., & Paul, D. R. (1996) · Polymer · doi:10.1016/0032-3861(96)00373-4 · Cited by 134
Self-citationRubber toughening of nylon 6 nanocomposites
Ahn, Y., & Paul, D. R. (2006) · Polymer · doi:10.1016/j.polymer.2006.02.074 · Cited by 134
Self-citationCore-Shell Tecto(dendrimers): I. Synthesis and Characterization of Saturated Shell Models
Uppuluri, S., SWANSON, D. R., Piehler, L. T., Li, J., Hagnauer, G. L., & Tomalia, D. A. (2000) · Advanced Materials · doi:10.1002/(sici)1521-4095(200006)12:11<843::aid-adma843>3.0.co;2-t · Cited by 127
Homogeneous nucleation of the dispersed crystallisable component of immiscible polymer blends
Santana, O. O., & M�ller, A. J. (1994) · Polymer Bulletin · doi:10.1007/bf00587890 · Cited by 117
Direct numerical predictions for the elastic and thermoelastic properties of short fibre composites
Lusti, H. R. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00106-9 · Cited by 117
Preparation and properties of polyethylene‐clay hybrids
Kato, M. P., Okamoto, H., Hasegawa, N., Tsukigase, A., & Usuki, A. (2003) · Polymer Engineering and Science · doi:10.1002/pen.10111 · Cited by 116
Living anionic surface initiated polymerization (sip) of styrene from clay surfaces
Zhou, Q., Fan, X., Xia, C., Mays, J., & Advincula, R. (2001) · Chemistry of Materials · doi:10.1021/cm0101780 · Cited by 113
Mechanical response and rheological properties of polycarbonate layered‐silicate nanocomposites
Hsieh, A. J., Moy, P., Beyer, F. L., Madison, P., Napadensky, E., Ren, J., & Krishnamoorti, R. (2004) · Polymer Engineering and Science · doi:10.1002/pen.20074 · Cited by 105
Molecular Underpinnings of the Mechanical Reinforcement in Polymer Nanocomposites
Sen, S., Thomin, J. D., Kumar, S. K., & Keblinski, P. (2007) · Macromolecules · doi:10.1021/ma070512z · Cited by 101
Kim, D. H., Fasulo, P. D., Rodgers, W. R., & Paul, D. R. (2007) · Polymer · doi:10.1016/j.polymer.2007.08.010 · Cited by 101
Self-citationHill, M. L., Kim, Y. S., Einsla, B. R., & McGrath, J. E. E. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.06.016 · Cited by 100
Crystallization and Orientation of Syndiotactic Polystyrene in Nanorods
Wu, H., Wang, W. J., Yang, H., & Su, Z. (2007) · Macromolecules · doi:10.1021/ma070564o · Cited by 98
Stretz, H. A., Paul, D. R., & Cassidy, P. E. (2005) · Polymer · doi:10.1016/j.polymer.2005.03.043 · Cited by 98
Self-citationChoi, W. J., Kim, H., Yoon, K. H., Kwon, O. H., & Hwang, C. I. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23268 · Cited by 97
Uthirakumar, P., Nahm, K. S., Hahn, Y., & Lee, Y. (2004) · European Polymer Journal · doi:10.1016/j.eurpolymj.2004.06.013 · Cited by 92
PMMA/MMT nanocomposites prepared by one-step in situ intercalative solution polymerization
Huskić, M., & Žigon, M. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.09.009 · Cited by 80
Crystallization and melting behavior of polyester/clay nanocomposites
Phang, I. Y., Pramoda, K. P., Liu, T. X., & He, C. (2004) · Polymer International · doi:10.1002/pi.1513 · Cited by 76
Polymer-layered silicate nanocomposites based on poly(ε-caprolactone)
Kiersnowski, A., & Pigłowski, J. (2004) · European Polymer Journal · doi:10.1016/j.eurpolymj.2004.01.005 · Cited by 75
Multiple melting and crystallization of nylon‐66/montmorillonite nanocomposites
Zhang, Q., Yu, Z., Yang, M., Ma, J., & Mai, Y. (2003) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10608 · Cited by 73
Su, Y.-H., Liu, Y., Sun, Y., Lai, J., Guiver, M. D., & Gao, Y. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.233 · Cited by 71
Homminga, D., Goderis, B., Dolbnya, I. P., Reynaers, H., & Groeninckx, G. (2005) · Polymer · doi:10.1016/j.polymer.2005.10.016 · Cited by 70
Hasegawa, N., & Usuki, A. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20459 · Cited by 65
Masenelli‐Varlot, K., Vigier, G., Vermogen, A., Gauthier, C., & Cavaillé, J. Y. (2007) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21186 · Cited by 55
Biological performances of poly(ether)urethane–silver nanocomposites
Hung, H., & Hsu, S. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/47/475101 · Cited by 54
Jian-ping, L., & Liu, W. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26028 · Cited by 51
Improvement of the barrier properties of Nafion® by fluoro-modified montmorillonite
Thomassin, J., Pagnoulle, C., Bizzari, D., Caldarella, G., GERMAIN, A., & Jérôme, R. (2006) · Solid State Ionics · doi:10.1016/j.ssi.2006.04.023 · Cited by 43
Spontaneous swelling of layered nanostructures by a polymer melt
Lee, J. Y., Baljon, A. R. C., & Loring, R. F. (1999) · The Journal of Chemical Physics · doi:10.1063/1.480311 · Cited by 43
Wang, Z., Ni, H., Zhao, C., Li, X., Fu, T., & Na, H. (2006) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.20841 · Cited by 43
Zhang, Q., Zha, L., Ma, J., & Liang, B. (2007) · Macromolecular Rapid Communications · doi:10.1002/marc.200600629 · Cited by 39
Influence of polymer modulus on the percolation threshold of latex-based composites
Kim, Y. S., Wright, J. B., & Grunlan, J. C. (2007) · Polymer · doi:10.1016/j.polymer.2007.11.035 · Cited by 36
Prashantha, K., & Park, S. G. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21970 · Cited by 34
Analysis of polymer blend morphologies from transmission electron micrographs
Corté, L., & Ludwik Leibler, B. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.109 · Cited by 30
Stabilized Blue Emission from Polymer–Dielectric Nanolayer Nanocomposites
Park, J. H., Lim, Y. T., Park, O. O., Kim, J., Yu, J., & Kim, Y. C. (2004) · Advanced Functional Materials · doi:10.1002/adfm.200305045 · Cited by 26
Stretz, H. A., & Paul, D. R. (2006) · Polymer · doi:10.1016/j.polymer.2006.10.013 · Cited by 21
Self-citationNanocomposites from Layered Silicates: Graft Polymerization with Intercalated Ammonium Peroxides
Albrecht, M., Ehrler, S., & Mühlebach, A. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200390065 · Cited by 20
Li, D. X., Zhang, G., Wang, Z., Zhao, C., & Na, H. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.25543 · Cited by 9
Cited by
TEMPO-oxidized cellulose nanofibers
Isogai, A., Saito, T., & Fukuzumi, H. (2011) · Nanoscale · doi:10.1039/c0nr00583e · Cited by 3,179
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
Food packaging based on polymer nanomaterials
Silvestre, C., Duraccio, D., & Cimmino, S. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.003 · Cited by 937
Polymer Nanocomposites—A Comparison between Carbon Nanotubes, Graphene, and Clay as Nanofillers
Bhattacharya, M. (2016) · Materials · doi:10.3390/ma9040262 · Cited by 747
Müller, K., Bugnicourt, E., Latorre, M., Jorda, M., Echegoyen Sanz, Y., Lagaron, J., Miesbauer, O., Bianchin, A., Hankin, S., Bölz, U., et al. (2017) · Nanomaterials · doi:10.3390/nano7040074 · Cited by 746
Metadata
- Authors
- Paul, D. R., & Robeson, L. M.
- Venue
- Polymer
- Publisher
- Elsevier BV
- Published
- 2008-07
- Volume
- 49
- Issue
- 15
- Pages
- 3187-3204
- ISSN
- 0032-3861 (ISSN-L)
- OpenAlex
- W2147182795
- Cited by
- 3,317
- References
- 166
- FWCI
- 120.49
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.