The DOI matches its Crossref record; 160 of the 160 references it cites were found in a registry or an index.
Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing
Abstract
Abstract Elastomers are a unique and important class of polymers that enjoy applications in virtually every industry, including healthcare, aerospace, automotive, and apparel. However, due to inherent physical, thermal, and mechanical properties of elastomers, the additive manufacturing (AM) of elastomers remains challenging. These challenges are discussed in the context of various AM processes, including powder bed fusion, material extrusion, and vat photopolymerization. This review provides an in-depth discussion of the current state of silicone and polyurethane polymers for AM, and also discusses polyesters/polycarbonates, liquid crystalline elastomers, and monomer compositions that provide elastomeric properties upon photocuring. Finally, the current state of common, commercially-available elastomers for AM is provided, as well as an outlook for this rapidly progressing field. We expect this review to be useful for any research involved with the additive manufacturing of elastomers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
Materials science and engineering: An introduction
Clayton, C. R. (1987) · Materials Science and Engineering · doi:10.1016/0025-5416(87)90343-0 · Cited by 5,925
Materials Science and Engineering: An Introduction
Callister, W. D. (1985) · Cited by 5,351
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Introduction to Physical Polymer Science
Sperling, L. H. (2005) · doi:10.1002/0471757128 · Cited by 2,917
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
Zeta potential in colloid science. Principles and applications
Vold, M. J. (1982) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(82)90296-x · Cited by 2,330
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Zeta potential in colloid science : principles and applications
Hunter, R. J. (1981) · Cited by 1,942
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Flexible mechanical metamaterials
Bertoldi, K., Vitelli, V., Christensen, J., & van Hecke, M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.66 · Cited by 1,867
Programmable and adaptive mechanics with liquid crystal polymer networks and elastomers
White, T. J., & Broer, D. J. (2015) · Nature Materials · doi:10.1038/nmat4433 · Cited by 1,744
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Introduction to Physical Polymer Science
Stamm, M. (2006) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200600086 · Cited by 1,233
Liquid crystalline elastomers as actuators and sensors
Ohm, C., Brehmer, M., & Zentel, R. (2010) · Advanced Materials · doi:10.1002/adma.200904059 · Cited by 1,169
Voxelated liquid crystal elastomers
Ware, T. H., McConney, M. E., Wie, J. J., Tondiglia, V. P., & White, T. J. (2015) · Science · doi:10.1126/science.1261019 · Cited by 1,157
The upcoming 3D-printing revolution in microfluidics
Bhattacharjee, N., Urrios, A., Kang, S., & Folch, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00163g · Cited by 1,123
Mechanically robust, readily repairable polymers via tailored noncovalent cross-linking
Yanagisawa, Y., Nan, Y., Okuro, K., & Aida, T. (2018) · Science · doi:10.1126/science.aam7588 · Cited by 1,073
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
Multistable Architected Materials for Trapping Elastic Strain Energy
Shan, S., Kang, S. H., Raney, J. R., Wang, P., Fang, L., Candido, F., Lewis, J. A., & Bertoldi, K. (2015) · Advanced Materials · doi:10.1002/adma.201501708 · Cited by 986
Soft biological materials and their impact on cell function
Levental, I., Georges, P. C., & Janmey, P. A. (2007) · Soft Matter · doi:10.1039/b610522j · Cited by 905
Petrović, Z. S., & Ferguson, J. (1991) · Progress in Polymer Science · doi:10.1016/0079-6700(91)90011-9 · Cited by 895
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
Application of inkjet printing to tissue engineering
Boland, T., Xu, T., Damon, B., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 783
Lee, J.-H., Hwang, K. S., Jang, S. P., Lee, B. H., Kim, J. H., Choi, S. U. S., & Choi, C. J. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2007.10.026 · Cited by 771
A review of rapid prototyping techniques for tissue engineering purposes
Peltola, S. M., Melchels, F. P. W., Grijpma, D. W., & Kellomäki, M. (2008) · Annals of Medicine · doi:10.1080/07853890701881788 · Cited by 751
Strategies to Reduce Oxygen Inhibition in Photoinduced Polymerization
Ligon, S. C., Husár, B., Wutzel, H., Holman, R., & Liska, R. (2014) · Chemical Reviews · doi:10.1021/cr3005197 · Cited by 721
Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing
Patel, D. K., Sakhaei, A. H., Layani, M., Zhang, B., Ge, Q., & Magdassi, S. (2017) · Advanced Materials · doi:10.1002/adma.201606000 · Cited by 673
Yilgör, I., Yilgör, E., & Wilkes, G. L. (2015) · Polymer · doi:10.1016/j.polymer.2014.12.014 · Cited by 654
Writing in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 635
Integrated 3D-printed reactionware for chemical synthesis and analysis
Symes, M. D., Kitson, P. J., Yan, J., Richmond, C. J., Cooper, G. J. T., Bowman, R. W., Vilbrandt, T., & Cronin, L. (2012) · Nature Chemistry · doi:10.1038/nchem.1313 · Cited by 617
Novel Citric Acid‐Based Biodegradable Elastomers for Tissue Engineering
Yang, J., Webb, A. R., & Ameer, G. A. (2004) · Advanced Materials · doi:10.1002/adma.200306264 · Cited by 590
LaFratta, C. N., Fourkas, J. T., Baldacchini, T., & Farrer, R. A. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200603995 · Cited by 589
Soft Somatosensitive Actuators via Embedded 3D Printing
Truby, R. L., Wehner, M., Grosskopf, A. K., Vogt, D. M., Uzel, S. G. M., Wood, R. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706383 · Cited by 586
Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations
Clausen, A., Wang, F., Jensen, J. S., Sigmund, O., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201502485 · Cited by 551
3D printing of robotic soft actuators with programmable bioinspired architectures
Schaffner, M., Faber, J. A., Pianegonda, L., Rühs, P. A., Coulter, F., & Studart, A. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03216-w · Cited by 518
Cramer, N. B., & Bowman, C. N. (2001) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1314 · Cited by 510
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
Direct writing in three dimensions
Lewis, J. A., & Gratson, G. M. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00344-x · Cited by 507
Mondschein, R. J., Kanitkar, A., Williams, C. B., Verbridge, S. S., & Long, T. E. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.005 · Cited by 475
Self-citationEmulsion polymerization: State of the art in kinetics and mechanisms
Thickett, S. C., & Gilbert, R. G. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.031 · Cited by 453
3D Printed Stretchable Tactile Sensors
Guo, S., Qiu, K., Meng, F., Park, S. H., & McAlpine, M. C. (2017) · Advanced Materials · doi:10.1002/adma.201701218 · Cited by 445
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Hinton, T. J., Hudson, A., Pusch, K., Lee, A., & Feinberg, A. W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00170 · Cited by 437
Hsieh, F.-Y., Lin, H.-H., & Hsu, S.-H. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.028 · Cited by 420
3D Printing of Transparent and Conductive Heterogeneous Hydrogel–Elastomer Systems
Tian, K., Bae, J., Bakarich, S. E., Yang, C., Gately, R. D., Spinks, G. M., in het Panhuis, M., Suo, Z., & Vlassak, J. J. (2017) · Advanced Materials · doi:10.1002/adma.201604827 · Cited by 419
The melt viscosity-molecular weight relationship for linear polymers
Colby, R. H., Fetters, L. J., & Graessley, W. W. (1987) · Macromolecules · doi:10.1021/ma00175a030 · Cited by 414
Synthesis and evaluation of poly(diol citrate) biodegradable elastomers
Yang, J., Webb, A. R., Pickerill, S. J., Hageman, G., & Ameer, G. A. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.106 · Cited by 413
A New 3D Printing Strategy by Harnessing Deformation, Instability, and Fracture of Viscoelastic Inks
Yuk, H., & Zhao, X. (2018) · Advanced Materials · doi:10.1002/adma.201704028 · Cited by 381
Zhang, J., & Xiao, P. (2018) · Polymer Chemistry · doi:10.1039/c8py00157j · Cited by 381
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
Handbook of Thermoplastic Elastomers
(2014) · Elsevier eBooks · doi:10.1016/c2013-0-00140-5 · Cited by 362
Additive Manufacturing Technologies – Rapid Prototyping to Direct Digital Manufacturing
Mueller, B. (2012) · Assembly Automation · doi:10.1108/aa.2012.03332baa.010 · Cited by 359
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
Hardin, J. O., Ober, T. J., Valentine, A. D., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500222 · Cited by 340
Layerless fabrication with continuous liquid interface production
Janusziewicz, R., Tumbleston, J. R., Quintanilla, A. L., Mecham, S. J., & DeSimone, J. M. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1605271113 · Cited by 332
Stein, J., Lewis, L. N., Gao, Y., & Scott, R. A. (1999) · Journal of the American Chemical Society · doi:10.1021/ja9825377 · Cited by 323
Infrared thermography of welding zones produced by polymer extrusion additive manufacturing
Seppala, J. E., & Migler, K. B. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.007 · Cited by 322
Bhattacharjee, N., Parra‐Cabrera, C., Kim, Y. T., Kuo, A. P., & Folch, A. (2018) · Advanced Materials · doi:10.1002/adma.201800001 · Cited by 322
Three‐Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness
Duoss, E. B., Weisgraber, T. H., Hearon, K., Zhu, C., Small, W., Metz, T. R., Vericella, J. J., Barth, H. D., Kuntz, J. D., Maxwell, R. S., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400451 · Cited by 316
3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
Yuan, C., Roach, D. J., Dunn, C. K., Mu, Q., Kuang, X., Yakacki, C. M., Wang, T. J., Yu, K., & Qi, H. J. (2017) · Soft Matter · doi:10.1039/c7sm00759k · Cited by 300
How to tailor flexible silicone elastomers with mechanical integrity: a tutorial review
Mazurek, P., Vudayagiri, S., & Skov, A. L. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00963e · Cited by 292
Weld formation during material extrusion additive manufacturing
Seppala, J. E., Hoon Han, S., Hillgartner, K. E., Davis, C. S., & Migler, K. B. (2017) · Soft Matter · doi:10.1039/c7sm00950j · Cited by 291
Self-assembled micro-organogels for 3D printing silicone structures
O’Bryan, C. S., Bhattacharjee, T., Hart, S., Kabb, C. P., Schulze, K. D., Chilakala, I., Sumerlin, B. S., Sawyer, W. G., & Angelini, T. E. (2017) · Science Advances · doi:10.1126/sciadv.1602800 · Cited by 277
Zhou, X., Li, Y., Fang, C., Li, S., Cheng, Y., Lei, W., & Meng, X. (2015) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2015.03.002 · Cited by 273
Inkjet and inkjet-based 3D printing: connecting fluid properties and printing performance
Guo, Y., Patanwala, H. S., Bognet, B., & Ma, A. W. K. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2016-0076 · Cited by 258
Hung, K.-C., Tseng, C.-S., Dai, L.-G., & Hsu, S.-H. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.019 · Cited by 251
Stampfl, J., Baudis, S., Heller, C., Liska, R., Neumeister, A., Kling, R., Ostendorf, A., & Spitzbart, M. (2008) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/18/12/125014 · Cited by 246
Highly-stretchable 3D-architected Mechanical Metamaterials
Jiang, Y., & Wang, Q. (2016) · Scientific Reports · doi:10.1038/srep34147 · Cited by 216
Saiani, A., Daunch, W. A., Verbeke, H., Leenslag, J.-W., & Higgins, J. S. (2001) · Macromolecules · doi:10.1021/ma0105993 · Cited by 202
Hung, K., Tseng, C., & Hsu, S. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400018 · Cited by 202
Photopolymers for rapid prototyping
Liska, R., Schuster, M., Inführ, R., Turecek, C., Fritscher, C., Seidl, B., Schmidt, V., Kuna, L., Haase, A., Varga, F., et al. (2007) · Journal of Coatings Technology and Research · doi:10.1007/s11998-007-9059-3 · Cited by 197
Hegde, M., Meenakshisundaram, V., Chartrain, N., Sekhar, S., Tafti, D., Williams, C. B., & Long, T. E. (2017) · Advanced Materials · doi:10.1002/adma.201701240 · Cited by 196
Self-citation3D‐Printing Strong High‐Resolution Antioxidant Bioresorbable Vascular Stents
van Lith, R., Baker, E., Ware, H., Yang, J., Farsheed, A. C., Sun, C., & Ameer, G. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600138 · Cited by 189
3D Printing by Multiphase Silicone/Water Capillary Inks
Roh, S., Parekh, D. P., Bharti, B., Stoyanov, S. D., & Velev, O. D. (2017) · Advanced Materials · doi:10.1002/adma.201701554 · Cited by 187
Additive manufacturing of silicone structures: A review and prospective
Liravi, F., & Toyserkani, E. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.002 · Cited by 180
Structural optimization of 3D-printed synthetic spider webs for high strength
Qin, Z., Compton, B. G., Lewis, J. A., & Buehler, M. J. (2015) · Nature Communications · doi:10.1038/ncomms8038 · Cited by 179
Integrated soft sensors and elastomeric actuators for tactile machines with kinesthetic sense
Robinson, S. S., O’Brien, K. W., Zhao, H., Peele, B. N., Larson, C. M., Murray, B. C. M., Meerbeek, I. M. V., Dunham, S. N., & Shepherd, R. F. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.09.005 · Cited by 174
Click chemistry stereolithography for soft robots that self-heal
Wallin, T. J., Pikul, J. H., Bodkhe, S., Peele, B. N., Mac Murray, B. C., Therriault, D., McEnerney, B. W., Dillon, R. P., Giannelis, E. P., & Shepherd, R. F. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01605k · Cited by 173
3D Printing of PDMS Improves Its Mechanical and Cell Adhesion Properties
Ozbolat, V., Dey, M., Ayan, B., Povilianskas, A., Demirel, M. C., & Ozbolat, I. T. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00646 · Cited by 173
Photoreversible Covalent Hydrogels for Soft-Matter Additive Manufacturing
Kabb, C. P., O’Bryan, C. S., Deng, C. C., Angelini, T. E., & Sumerlin, B. S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02441 · Cited by 167
Print your own membrane: direct rapid prototyping of polydimethylsiloxane
Femmer, T., Kuehne, A. J. C., & Wessling, M. (2014) · Lab on a Chip · doi:10.1039/c4lc00320a · Cited by 161
Three-dimensional printing with sacrificial materials for soft matter manufacturing
O’Bryan, C. S., Bhattacharjee, T., Niemi, S. R., Balachandar, S., Baldwin, N., Ellison, S. T., Taylor, C. R., Sawyer, W. G., & Angelini, T. E. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.167 · Cited by 154
Superstretchable and Processable Silicone Elastomers by Digital Light Processing 3D Printing
Zhao, T., Yu, R., Li, S., Li, X., Zhang, Y., Yang, X. M., Zhao, X., Wang, C., Liu, Z., Dou, R., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b03156 · Cited by 151
3D‐Printable Antimicrobial Composite Resins
Yue, J., Zhao, P. T., Gerasimov, J. Y., van de Lagemaat, M., Grotenhuis, A., Rustema‐Abbing, M., van der Mei, H. C., Busscher, H. J., Herrmann, A. P., & Ren, Y. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502384 · Cited by 150
Jiang, X., Li, J., Ding, M., Tan, H. S., Ling, Q., Zhong, Y., & Fu, Q. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.02.029 · Cited by 146
Gorsche, C., Harikrishna, R., Baudis, S., Knaack, P., Husár, B., Läuger, J., Hoffmann, H., & Liska, R. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b00272 · Cited by 139
Inkjet 3D printing of UV and thermal cure silicone elastomers for dielectric elastomer actuators
McCoul, D., Rosset, S., Schlatter, S., & Shea, H. R. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa9695 · Cited by 138
Modular Elastomer Photoresins for Digital Light Processing Additive Manufacturing
Thrasher, C. J., Schwartz, J. J., & Boydston, A. J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13909 · Cited by 138
Polyurethane-based scaffolds for myocardial tissue engineering
Chiono, V., Mozetic, P., Boffito, M., Sartori, S., Gioffredi, E., Silvestri, A., Rainer, A., Giannitelli, S. M., Trombetta, M., Nurzyńska, D., et al. (2013) · Interface Focus · doi:10.1098/rsfs.2013.0045 · Cited by 121
3D Printing Polymers with Supramolecular Functionality for Biological Applications
Pekkanen, A. M., Mondschein, R. J., Williams, C. B., & Long, T. E. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00671 · Cited by 118
Self-citationFillers for polysiloxane (“silicone”) elastomers
Paul, D. R., & Mark, J. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.03.004 · Cited by 116
Liravi, F., & Toyserkani, E. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.10.051 · Cited by 114
Rapid Prototyping of a Double-Layer Polyurethane–Collagen Conduit for Peripheral Nerve Regeneration
Cui, T., Yan, Y., Zhang, R., Liu, L., Xu, W., & Wang, X. (2008) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2008.0354 · Cited by 111
Zhang, C., Wen, X., Vyavahare, N. R., & Boland, T. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.06.009 · Cited by 110
3D printed cellular solid outperforms traditional stochastic foam in long-term mechanical response
Maiti, A., Small, W., Lewicki, J. P., Weisgraber, T. H., Duoss, E. B., Chinn, S. C., Pearson, M. A., Spadaccini, C., Maxwell, R. S., & Wilson, T. S. (2016) · Scientific Reports · doi:10.1038/srep24871 · Cited by 109
Two-Photon Three-Dimensional Microfabrication of Poly(Dimethylsiloxane) Elastomers
Coenjarts, C. A., & Ober, C. K. (2004) · Chemistry of Materials · doi:10.1021/cm048717z · Cited by 103
Sirrine, J. M., Meenakshisundaram, V., Moon, N. G., Scott, P. J., Mondschein, R. J., Weiseman, T. F., Williams, C. B., & Long, T. E. (2018) · Polymer · doi:10.1016/j.polymer.2018.02.056 · Cited by 103
Self-citation3D printing of photocurable poly(glycerol sebacate) elastomers
Yeh, Y., Highley, C. B., Ouyang, L., & Burdick, J. A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045004 · Cited by 101
Biodegradable polyurethane cancellous bone graft substitutes in the treatment of iliac crest defects
Gogolewski, S., & Górna, K. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30834 · Cited by 100
Amide-containing segmented copolymers
Buckwalter, D. J., Dennis, J. M., & Long, T. E. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.11.003 · Cited by 97
Self-citationHu, X., Kang, H., Li, Y., Geng, Y., Wang, R., & Zhang, L. (2016) · Polymer · doi:10.1016/j.polymer.2016.11.045 · Cited by 93
Water-based synthesis and processing of novel biodegradable elastomers for medical applications
Hsu, S., Hung, K., Lin, Y., Su, C.-H., Yeh, H.-Y., Jeng, U., Lu, C.-Y. D., Dai, S. A., Fu, W.-E., & Lin, J. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00572d · Cited by 91
Continuous Optical 3D Printing of Green Aliphatic Polyurethanes
Pyo, S., Wang, P., Hwang, H. H., Zhu, W. Z., Warner, J., & Chen, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12500 · Cited by 91
Huang, Y., He, K., & Wang, X. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.03.048 · Cited by 90
Ou, C.-W., Su, C.-H., Jeng, U., & Hsu, S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500213t · Cited by 90
Yılgör, İ., Eynur, T., Bilgin, S., Yılgör, E., & Wilkes, G. L. (2010) · Polymer · doi:10.1016/j.polymer.2010.11.040 · Cited by 89
Custom 3D Printable Silicones with Tunable Stiffness
Durban, M. M., Lenhardt, J. M., Wu, A. S., Small, W., Bryson, T. M., Pérez, L. X. P., Nguyen, D. T., Gammon, S. A., Smay, J. E., Duoss, E. B., et al. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201700563 · Cited by 89
3D reactive inkjet printing of polydimethylsiloxane
Sturgess, C., Tuck, C. J., Ashcroft, I., & Wildman, R. D. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc02412f · Cited by 85
Petrochenko, P. E., Torgersen, J., Gruber, P., Hicks, L. A., Zheng, J., Kumar, G., Narayan, R. J., Goering, P. L., Liska, R., Stampfl, J., et al. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400442 · Cited by 84
Rapid Prototyping of Polyurethane for the Creation of Vascular Systems
Xu, W., Wang, X., Yan, Y., & Zhang, R. (2008) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911507088271 · Cited by 83
Expert-guided optimization for 3D printing of soft and liquid materials
Abdollahi, S., Davis, A. L., Miller, J. H., & Feinberg, A. W. (2018) · PLoS ONE · doi:10.1371/journal.pone.0194890 · Cited by 78
Prévôt, M. E., Üstünel, Ş., & Hegmann, E. (2018) · Materials · doi:10.3390/ma11030377 · Cited by 76
Tsai, Y.-C., Li, S., Hu, S. ‐., Chang, W.-C., Jeng, U., & Hsu, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10697 · Cited by 74
Evaluation of direct and indirect additive manufacture of maxillofacial prostheses
Eggbeer, D., Bibb, R., Evans, P. L., & Ji, L. (2012) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/0954411912451826 · Cited by 73
3D Printing of Free‐Standing Stretchable Electrodes with Tunable Structure and Stretchability
Wei, H., Li, K., Liu, W., Meng, H., Zhang, P. X., & Yan, C. Y. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700341 · Cited by 73
Three-dimensional laser micro-sculpturing of silicone: towards bio-compatible scaffolds
Rekštytė, S., Malinauskas, M., & Juodkazis, S. (2013) · Optics Express · doi:10.1364/oe.21.017028 · Cited by 70
3D Printed Silicones with Shape Memory
Wu, A. S., Small, W., Bryson, T. M., Cheng, E., Metz, T. R., Schulze, S. E., Duoss, E. B., & Wilson, T. S. (2017) · Scientific Reports · doi:10.1038/s41598-017-04663-z · Cited by 70
Vat Photopolymerization Processes
Gibson, I., Rosen, D. W., & Stucker, B. E. (2014) · Springer eBooks · doi:10.1007/978-1-4939-2113-3_4 · Cited by 69
Synthesis, Properties, and Applications of Ion‐Containing Polyurethane Segmented Copolymers
Nelson, A. M., & Long, T. E. (2014) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201400373 · Cited by 68
Self-citationAn experimentalist's view of the physics of rubber elasticity
Urayama, K. (2006) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21010 · Cited by 68
Water‐soluble photopolymers for rapid prototyping of cellular materials
Liska, R., Schwager, F., Maier, C., Cano‐Vives, R., & Stampfl, J. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.22025 · Cited by 64
New Materials for Rapid Prototyping Applications
Stampfl, J., & Liska, R. (2005) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200500199 · Cited by 64
Baudis, S., Nehl, F., Ligon, S. C., Nigisch, A., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2011) · Biomedical Materials · doi:10.1088/1748-6041/6/5/055003 · Cited by 62
Preliminary Studies on Peripheral Nerve Regeneration using a New Polyurethane Conduit
Yin, D., Wang, X., Yan, Y., & Zhang, R. (2007) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911506076063 · Cited by 61
Use of digital technologies for nasal prosthesis manufacturing
Paloušek, D., Rosický, J., & Koutný, D. (2013) · Prosthetics and Orthotics International · doi:10.1177/0309364613489333 · Cited by 60
Preparation of a Designed Poly(trimethylene carbonate) Microvascular Network by Stereolithography
Schüller-Ravoo, S., Zant, E., Feijén, J., & Grijpma, D. W. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400363 · Cited by 58
Hu, X., Kang, H., Li, Y., Li, M., Wang, R., Xu, R., Qiao, H., & Zhang, L. (2015) · Polymer Chemistry · doi:10.1039/c5py01332a · Cited by 51
A New Polyurethane/Heparin Vascular Graft for Small-Caliber Vein Repair
Yan, Y., Wang, X., Yin, D., & Zhang, R. (2007) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911507078386 · Cited by 50
Hsiao, L. C., Badruddoza, A. Z. M., Cheng, L., & Doyle, P. S. (2017) · Soft Matter · doi:10.1039/c6sm02208a · Cited by 49
Zentel, R. (1989) · Advanced Materials · doi:10.1002/adma.19890011003 · Cited by 47
Novel photo-curable polyurethane resin for stereolithography
Sinh, L. H., Korhonen, H., Liikanen, M., Malin, M., Luong, N. D., Weisser, J., Walter, T., Schnabelrauch, M., & Jukka, S. (2016) · RSC Advances · doi:10.1039/c6ra05045j · Cited by 47
Gao, Y., Li, Y., Hu, X., Wu, W., Wang, Z., Wang, R., & Zhang, L. (2017) · Polymers · doi:10.3390/polym9120694 · Cited by 47
(Meth)acrylate‐based photoelastomers as tailored biomaterials for artificial vascular grafts
Baudis, S., Heller, C. M., Liska, R., Stampfl, J., Bergmeister, H., & Weigel, G. (2009) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23352 · Cited by 46
Electrically Actuated Hydraulic Solids
Lipton, J. I., Angle, S., Banai, R. E., Peretz, E., & Lipson, H. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600271 · Cited by 44
Samusjew, A., Kratzer, M., Moser, A., Teichert, C., Krawczyk, K. K., & Grießer, T. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13272 · Cited by 43
Scott, P. J., Meenakshisundaram, V., Chartrain, N. A., Sirrine, J. M., Williams, C. B., & Long, T. E. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00150 · Cited by 41
Self-citationSegmented poly(urethane‐urea) elastomers based on polycaprolactone: Structure and properties
May-Hernández, L. H., Hernández‐Sánchez, F., Ribelles, J. L. G., & Serra, R. S. I. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32929 · Cited by 38
Sartori, S., Boffito, M., Serafini, P. M., Caporale, A., Silvestri, A., Bernardi, E., Sassi, M. P., Boccafoschi, F., & Ciardelli, G. (2013) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2013.01.006 · Cited by 37
Rechichi, A., Ciardelli, G., D’Acunto, M., Vozzi, G., & Giusti, P. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31349 · Cited by 34
Ink-Jet Printing of High-Molecular-Weight Polymers in Oil-in-Water Emulsions
Johns, A. S., & Bain, C. D. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04454 · Cited by 22
Métivier, T., Beyou, E., & Cassagnau, P. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.02.008 · Cited by 21
Kızıltay, A., Marcos-Fernández, Á. A., Román, J. S., Sousa, R. A., Reis, R. L., Hasırcı, V., & Hasırcı, N. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1848 · Cited by 19
Stretchable 3D lattice conductors
Li, T., Jiang, Y., Yu, K., & Wang, Q. (2017) · Soft Matter · doi:10.1039/c7sm01435j · Cited by 19
Güney, A., Malda, J., Dhert, W. J. A., & Grijpma, D. W. (2017) · The International Journal of Artificial Organs · doi:10.5301/ijao.5000543 · Cited by 18
Improvement of cytocompatibility of 3D-printing resins for endothelial cell adhesion
Lu, Z., Jiang, X., Zuo, X., & Feng, L. (2016) · RSC Advances · doi:10.1039/c6ra20700f · Cited by 17
Process development for high-resolution 3D-printing of bioresorbable vascular stents
Ware, H. O. T., Farsheed, A. C., van Lith, R., Baker, E., Ameer, G. A., & Sun, C. (2017) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2252856 · Cited by 16
Photopolymerizable Elastomers for Vascular Tissue Regeneration
Baudis, S., Steyrer, B., Pulka, T., Wilhelm, H., Weigel, G., Bergmeister, H., Stampfl, J., & Liska, R. (2010) · Macromolecular Symposia · doi:10.1002/masy.201051018 · Cited by 14
Bioinspired Cellular Structures: Additive Manufacturing and Mechanical Properties
Stampfl, J., Pettermann, H. E., & Liska, R. (2011) · Biological and medical physics series · doi:10.1007/978-3-642-11934-7_6 · Cited by 13
Stampfl, J., & Liska, R. (2011) · Springer eBooks · doi:10.1007/978-0-387-92904-0_7 · Cited by 8
3D-printing of Urethane-based Photoelastomers for Vascular Tissue Regeneration
Baudis, S., Pulka, T., Steyrer, B., Wilhelm, H., Weigel, G., Bergmeister, H., Stampfl, J., & Liska, R. (2009) · MRS Proceedings · doi:10.1557/proc-1239-vv08-04 · Cited by 5
Cited by
Cruz Sanchez, F. A., Boudaoud, H., Camargo, M., & Pearce, J. M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121602 · Cited by 410
The Future of Molecular Machines
Aprahamian, I. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00064 · Cited by 376
Elastic vitrimers: Beyond thermoplastic and thermoset elastomers
Luo, J., Demchuk, Z., Zhao, X., Saito, T., Tian, M., Sokolov, A. P., & Cao, P.-F. (2022) · Matter · doi:10.1016/j.matt.2022.04.007 · Cited by 281
Rapid High-Resolution Visible Light 3D Printing
Ahn, D., Stevens, L. M., Zhou, K., & Page, Z. A. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00929 · Cited by 263
Flame retardant polymer materials: An update and the future for 3D printing developments
Vahabi, H., Laoutid, F., Mehrpouya, M., Saeb, M. R., & Dubois, P. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100604 · Cited by 263
Metadata
- Authors
- Herzberger, J., Sirrine, J. M., Williams, C. B., & Long, T. E.
- Venue
- Progress in Polymer Science
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 97
- Pages
- 101144
- ISSN
- 0079-6700 (ISSN-L)
- OpenAlex
- W2966665701
- Cited by
- 329
- References
- 160
- FWCI
- 13.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.