Catalytic pyrolysis of plastic waste: A review

Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review

Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663

Review of fast pyrolysis of biomass and product upgrading

Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856

A review on pyrolysis of plastic wastes

Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126

Thermolysis of waste plastics to liquid fuelA suitable method for plastic waste management and manufacture of value added products—A world prospective

Panda, A. K., Singh, R. K., & Mishra, D. K. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.005 · Cited by 956

Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP)

Achilias, D. S., Roupakias, C., Megalokonomos, P., Lappas, A. A., & Antonakou, Ε. V. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.06.076 · Cited by 730

Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time

Onwudili, J. A., Insura, N., & Williams, P. T. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.07.008 · Cited by 681

Pyrolysis technologies for municipal solid waste: A review

Chen, D., Yin, L., Wang, H., & He, P. (2014) · Waste Management · doi:10.1016/j.wasman.2014.08.004 · Cited by 674

Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons

Demirbas, A. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.03.001 · Cited by 579

A review of the chemical and physical mechanisms of the storage stability of fast pyrolysis bio-oils

Diebold, J. P. (1999) · doi:10.2172/753818 · Cited by 549

Catalytic pyrolysis of plastic wastes with two different types of catalysts: ZSM-5 zeolite and Red Mud

López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., Adrados, A., & Aranzabal, A. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.03.030 · Cited by 479

Waste to energy potential: A case study of Saudi Arabia

Ouda, O. K. M., Raza, S. A., Nizami, A. S., Rehan, M., Al-Waked, R., & Korres, N. E. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.04.005 · Cited by 474

Renewable Energy Markets in Developing Countries

Martinot, E., Chaurey, A., Lew, D. J., Moreira, J. R., & Wamukonya, N. (2002) · Annual Review of Energy and the Environment · doi:10.1146/annurev.energy.27.122001.083444 · Cited by 473

Pyrolysis Study of Polypropylene and Polyethylene Into Premium Oil Products

Ahmad, I., Khan, M. I., Khan, H., Ishaq, M., Tariq, R., Gul, K., & Ahmad, W. (2015) · International Journal of Green Energy · doi:10.1080/15435075.2014.880146 · Cited by 463

Pyrolysis of a fraction of waste polypropylene and polyethylene for the recovery of BTX aromatics using a fluidized bed reactor

Jung, S.-H., Cho, M.-H., Kang, B.-S., & Kim, J.-S. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.10.009 · Cited by 440

Effect of sulphuric acid treatment on the physico-chemical characteristics of kaolin clay

Panda, A. K., Mishra, B. G., Mishra, D. K., & Singh, R. (2010) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2010.04.022 · Cited by 440

Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor

López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.07.037 · Cited by 399

Fuel oil production from municipal plastic wastes in sequential pyrolysis and catalytic reforming reactors

Syamsiro, M., Saptoadi, H., Norsujianto, T., Noviasri, P., Cheng, S., Alimuddin, Z., & Yoshikawa, K. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.01.212 · Cited by 389

Thermal degradation of polystyrene

Faravelli, T., Pinciroli, M., Pisano, F., Bozzano, G., Dente, M., & Ranzi, E. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00159-5 · Cited by 370

Catalytic pyrolysis of polyethylene

Bagri, R., & Williams, P. T. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00139-5 · Cited by 362

Physicochemical and sorption characteristics of Malaysian Ceiba pentandra (L.) Gaertn. as a natural oil sorbent

Abdullah, M. A., Rahmah, A. U., & Man, Z. B. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.12.085 · Cited by 361

Interaction of Plastics in Mixed-Plastics Pyrolysis

Williams, P. T., & Williams, E. A. (1999) · Energy & Fuels · doi:10.1021/ef980163x · Cited by 360

Feedstock recycling of polymers by pyrolysis in a fluidised bed

Kaminsky, W., Predel, M., & Sadiki, A. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.05.002 · Cited by 354

Pyrolysis of high-density polyethylene in a fluidised bed reactor. Influence of the temperature and residence time

Mastral, F. J., Esperanza, E., Garcı́a, P., & Juste, M. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00137-1 · Cited by 346

Production, characterization and fuel properties of alternative diesel fuel from pyrolysis of waste plastic grocery bags

Sharma, B. K., Moser, B. R., Vermillion, K. E., Doll, K. M., & Rajagopalan, N. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.01.019 · Cited by 322

Fuels by pyrolysis of waste plastics from agricultural and packaging sectors in a pilot scale reactor

Miskolczi, N., Angyal, A., Bartha, L., & Valkai, I. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.04.019 · Cited by 315

Organic Catalysis over Crystalline Aluminosilicates

Venuto, P. B., & Landis, P. S. (1968) · Advances in Catalysis · doi:10.1016/s0360-0564(08)60430-7 · Cited by 312

Catalytic plastics cracking for recovery of gasoline-range hydrocarbons from municipal plastic wastes

Buekens, A. G., & Huang, H. (1998) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(98)00025-1 · Cited by 307

Fast pyrolysis of cassava rhizome in the presence of catalysts

Pattiya, A., Titiloye, J. O., & Bridgwater, A. V. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.09.002 · Cited by 304

Fast pyrolysis of plastic wastes

Scott, D. S., Czernik, S. R., Piskorz, J., & Radlein, D. S. A. G. (1990) · Energy & Fuels · doi:10.1021/ef00022a013 · Cited by 301

Recovery of hydrocarbon liquid from waste high density polyethylene by thermal pyrolysis

Kumar, S., & Singh, R. K. (2011) · Brazilian Journal of Chemical Engineering · doi:10.1590/s0104-66322011000400011 · Cited by 297

Applications of zeolites in petroleum refining

Degnan, T. F. (2000) · Topics in Catalysis · doi:10.1023/a:1009054905137 · Cited by 284

Characterisation and effect of using waste plastic oil and diesel fuel blends in compression ignition engine

Mani, M., Nagarajan, G., & Sampath, S. (2011) · Energy · doi:10.1016/j.energy.2010.10.049 · Cited by 282

Feedstock recycling of polyethylene in a two-step thermo-catalytic reaction system

Aguado, J., Serrano, D. P., San Miguel, G., Castro, M. C., & Madrid, S. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.11.008 · Cited by 258

Characterization of Products from the Pyrolysis of Municipal Solid Waste

Buah, W. K., Cunliffe, A. M., & Williams, P. T. (2007) · Process Safety and Environmental Protection · doi:10.1205/psep07024 · Cited by 254

Pyrolysis of plastic wastes. 1. Effect of plastic waste composition on product yield

Pinto, F., Costa, P., Gulyurtlu, I., & Cabrita, I. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00007-8 · Cited by 253

Cracking of High Density Polyethylene Pyrolysis Waxes on HZSM-5 Catalysts of Different Acidity

Artetxe, M., Lopez, G., Amutio, M., Elordi, G., Bilbao, J., & Olazar, M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4014869 · Cited by 250

Developing waste biorefinery in Makkah: A way forward to convert urban waste into renewable energy

Nizami, A. S., Shahzad, K., Rehan, M., Ouda, O. K. M., Khan, M. Z., Ismail, I. M. I., Almeelbi, T., Basahi, J. M., & Demirbas, A. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.04.116 · Cited by 237

Evaluation of pyrolysis process parameters on polypropylene degradation products

Abbas-Abadi, M. S., Haghighi, M. N., Yeganeh, H., & McDonald, A. G. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.05.023 · Cited by 235

Investigation of catalytic degradation of high-density polyethylene by hydrocarbon group type analysis

Seo, Y.-H., Lee, K.-H., & Shin, D.-H. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00186-9 · Cited by 233

Study of the pyrolysis of municipal solid waste for the production of valuable products

Velghe, I., Carleer, R., Yperman, J., & Schreurs, S. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.07.011 · Cited by 228

Advances in Induction and Microwave Heating of Mineral and Organic Materials

(2011) · InTech eBooks · doi:10.5772/562 · Cited by 224

Thermal degradation of municipal plastic waste for production of fuel-like hydrocarbons

Miskolczi, N., Bartha, L., Deák, G., & Jóver, B. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.04.025 · Cited by 219

Catalytic stepwise pyrolysis of packaging plastic waste

Lopez-Urionabarrenechea, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.03.004 · Cited by 216

99/01072 Catalytic plastics cracking for recovery of gasoline-range hydrocarbons from municipal plastic wastes

(1999) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(99)96253-7 · Cited by 209

Thermal degradation of polyethylene and polystyrene from the packaging industry over different catalysts into fuel-like feed stocks

Miskolczi, N., Bartha, L., & Deák, G. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.01.056 · Cited by 203

Liquid fuel production from waste tyre pyrolysis and its utilisation in a diesel engine

Frigo, S., Seggiani, M., Puccini, M., & Vitolo, S. (2014) · Fuel · doi:10.1016/j.fuel.2013.08.044 · Cited by 201

Fuel Production from LDPE Plastic Waste over Natural Zeolite Supported Ni, Ni-Mo, Co and Co-Mo Metals

Sriningsih, W., Saerodji, M. G., Trisunaryanti, W., Triyono, Armunanto, R., & Falah, I. I. (2014) · Procedia Environmental Sciences · doi:10.1016/j.proenv.2014.03.028 · Cited by 197

Thermal and catalytic degradation of structurally different types of polyethylene into fuel oil

Uddin, M. A., Koizumi, K., Murata, K., & Sakata, Y. (1997) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(96)00191-7 · Cited by 196

Effect of pressure on thermal degradation of polyethylene

Murata, K., Sato, K., & Sakata, Y. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2003.08.010 · Cited by 195

Comparision of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part I: Product yields, gas and pyrolysis oil properties

Ateş, F., Miskolczi, N., & Borsodi, N. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.01.112 · Cited by 194

Pyrolysis of poly(ethylene terephthalate) in a fluidised bed plant

Yoshioka, T., Grause, G., Eger, C., Kaminsky, W., & Okuwaki, A. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.06.001 · Cited by 193

Deactivation and regeneration of ZSM-5 zeolite in catalytic pyrolysis of plastic wastes

López, A., de Marco, I., Caballero, B. M., Adrados, A., & Laresgoiti, M. F. (2011) · Waste Management · doi:10.1016/j.wasman.2011.04.004 · Cited by 192

Pyrolysis of mixed plastics for the recovery of useful products

Siddiqui, M. N., & Redhwi, H. H. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.01.003 · Cited by 190

Comparison of plastic types for catalytic degradation of waste plastics into liquid product with spent FCC catalyst

Lee, K.-H., Noh, N.-S., Shin, D.-H., & Seo, Y. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00227-6 · Cited by 178

Feedstock recycling and pyrolysis of waste plastics: converting waste plastics into diesel and other fuels

(2007) · Choice Reviews Online · doi:10.5860/choice.44-6255 · Cited by 174

Effect of growth temperature and feedstock:catalyst ratio on the production of carbon nanotubes and hydrogen from the pyrolysis of waste plastics

Acomb, J. C., Wu, C., & Williams, P. T. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.01.012 · Cited by 168

Effect of particle size on pyrolysis of single-component municipal solid waste in fixed bed reactor

Luo, S., Xiao, B., Hu, Z., & Liu, S. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.10.048 · Cited by 166

Catalytical and thermal pyrolysis of polyolefins

Kaminsky, W., & Zorriqueta, I.-J. N. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.11.005 · Cited by 164

Microwave Heating Applied to Pyrolysis

Fernandez, Y., Arenillas, A., & Angel, J. (2011) · Advances in Induction and Microwave Heating of Mineral and Organic Materials · doi:10.5772/13548 · Cited by 163

Characterization and Utilization of Char Derived from Fast Pyrolysis of Plastic Wastes

Jamradloedluk, J., & Lertsatitthanakorn, C. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.03.139 · Cited by 161

Basic study on a continuous flow reactor for thermal degradation of polymers

Murata, K., Hirano, Y., Sakata, Y., & Uddin, M. A. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00181-4 · Cited by 160

Catalytic degradation of high density polyethylene over nanocrystalline HZSM-5 zeolite

Mastral, J. F., Berrueco, C., Gea, M., & Ceamanos, J. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.06.009 · Cited by 160

Key issues in estimating energy and greenhouse gas savings of biofuels: challenges and perspectives

Rathor, D., Nizami, A.-S., Singh, A., & Pant, D. (2016) · Biofuel Research Journal · doi:10.18331/brj2016.3.2.3 · Cited by 160

Acid properties of silica-alumina catalysts and catalytic degradation of polyethylene

Ohkita, H., Nishiyama, R., Tochihara, Y., Mizushima, T., Kakuta, N., Morioka, Y., Ueno, A., Namiki, Y., & Tanifuji, S. (1993) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00024a021 · Cited by 155

Effect of the temperature in the nature and extension of the primary and secondary reactions in the thermal and HZSM-5 catalytic pyrolysis of HDPE

Hernández, M. D. R., Gómez‐Siurana, A., García, A. N. J., Agulló, J., & Marcilla, A. F. (2006) · Applied Catalysis A General · doi:10.1016/j.apcata.2006.10.017 · Cited by 154

Catalytic degradation of polyethylene over solid acid catalysts

Park, D. W., Hwang, E. Y., Kim, J. R., Choi, J., Kim, Y. A., & Woo, H.-C. (1999) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00004-x · Cited by 152

Waste-to-energy and recycling value for developing integrated solid waste management plan in Lahore

Sadef, Y., Nizami, A., Batool, S., Chaudary, M., Ouda, O. K. M., Asam, Z.-U.-Z., Habib, K., Rehan, M., & Demirbaş, A. (2016) · Energy Sources Part B Economics Planning and Policy · doi:10.1080/15567249.2015.1052595 · Cited by 151

Catalytic degradation of high density polyethylene and polypropylene into liquid fuel in a powder-particle fluidized bed

Luo, G., Suto, T., Yasu, S., & Katō, K. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00095-1 · Cited by 150

Catalytic cracking of polyethylene over zeolite mordenite with enhanced textural properties

Aguado, J., Serrano, D. P., Escola, J. M., & Peral, Á. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.009 · Cited by 147

Catalytic conversion of polyolefins into fuels over zeolite beta

Aguado, J., Serrano, D. P., Escola, J. M., Garagorri, E., & Fernández, J. A. L. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00023-9 · Cited by 144

Pyrolysis characteristics of polystyrene and polypropylene in a stirred batch reactor

Kim, S.-S., & Kim, S. (2003) · Chemical Engineering Journal · doi:10.1016/s1385-8947(03)00184-0 · Cited by 142

Waste incineration and adverse birth and neonatal outcomes: a systematic review

Ashworth, D., Elliott, P., & Toledano, M. B. (2014) · Environment International · doi:10.1016/j.envint.2014.04.003 · Cited by 141

Pyrolysis of municipal plastic wastes II: Influence of raw material composition under catalytic conditions

López-Urionabarrenechea, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., Adrados, A., & Torres, A. (2011) · Waste Management · doi:10.1016/j.wasman.2011.05.021 · Cited by 140

Resource recovery via catalytic fast pyrolysis of polystyrene using zeolites

Ojha, D. K., & Vinu, R. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.02.024 · Cited by 139

Influence of FCC catalyst steaming on HDPE pyrolysis product distribution

Olazar, M., López, G., Amutio, M., Elordi, G., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.016 · Cited by 137

The potential of Saudi Arabian natural zeolites in energy recovery technologies

Nizami, A., Ouda, O. K. M., Rehan, M., El-Maghraby, A. M. O., Gardy, J., Hassanpour, A., Kumar, S., & Ismail, I. M. I. (2015) · Energy · doi:10.1016/j.energy.2015.07.030 · Cited by 135

Catalytic degradation of polymers: Part III—Degradation of polystyrene

Audisio, G., Bertini, F., Beltrame, P. L., & Carniti, P. (1990) · Polymer Degradation and Stability · doi:10.1016/0141-3910(90)90030-b · Cited by 135

An Argument for Developing Waste-to-energy Technologies in Saudi Arabia

Nizami, A., Rehan, M., Ouda, O. K. M., Shahzad, K., Sadef, Y., Iqbal, T., & Ismail, I. M. I. (2015) · Chemical engineering transactions · doi:10.3303/cet1545057 · Cited by 135

Effects of the types of zeolites on catalytic upgrading of pyrolysis wax oil

Lee, K.-H. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.015 · Cited by 134

Pyrolysis of Mixed Plastic Wastes for the Recovery of Benzene, Toluene, and Xylene (BTX) Aromatics in a Fluidized Bed and Chlorine Removal by Applying Various Additives

Cho, M.-H., Jung, S.-H., & Kim, J.-S. (2009) · Energy & Fuels · doi:10.1021/ef901127v · Cited by 131

Characteristics of liquid product from the pyrolysis of waste plastic mixture at low and high temperatures: Influence of lapse time of reaction

Lee, K.-H., & Shin, D.-H. (2006) · Waste Management · doi:10.1016/j.wasman.2005.12.017 · Cited by 130

Influence of pyrolysis condition on switchgrass bio-oil yield and physicochemical properties

He, R., Ye, X. P., English, B. C., & Satrio, J. A. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.02.069 · Cited by 125

A Comparison of the Use of Pyrolysis Oils in Diesel Engine

Wongkhorsub, C., & Chindaprasert, N. (2013) · Energy and Power Engineering · doi:10.4236/epe.2013.54b068 · Cited by 122

Catalytic Degradation of High-Density Polyethylene on an Ultrastable-Y Zeolite. Nature of Initial Polymer Reactions, Pattern of Formation of Gas and Liquid Products, and Temperature Effects

Manos, G., Garforth, A. A., & Dwyer, J. P. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990513i · Cited by 122

Comparison of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part II: Contaminants, char and pyrolysis oil properties

Miskolczi, N., Ateş, F., & Borsodi, N. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.06.109 · Cited by 121

Comparative life cycle assessment (LCA) of bio-oil production from fast pyrolysis and hydrothermal liquefaction of oil palm empty fruit bunch (EFB)

Chan, Y. H., Tan, R. R., Yusup, S. B., Lam, H. L., & Quitain, A. T. (2016) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-016-1172-5 · Cited by 120

Thermal and catalytic degradation of high density polyethylene and commingled post-consumer plastic waste

Ding, W., Liang, J., & Anderson, L. L. (1997) · Fuel Processing Technology · doi:10.1016/s0378-3820(96)01080-6 · Cited by 118

Hydrocarbon gases and oils from the recycling of polystyrene waste by catalytic pyrolysis

Williams, P. T., & Bagri, R. (2003) · International Journal of Energy Research · doi:10.1002/er.949 · Cited by 118

Thermal and catalytic cracking of polyethylene under mild conditions

van Grieken, R., Serrano, D. P., Aguado, J., García, R. A., & Rojo, C. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00145-5 · Cited by 113

Effect of feedstock composition on product yields and energy recovery rates of fast pyrolysis products from different straw types

Tröger, N., Richter, D., & Stahl, R. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.12.012 · Cited by 108

Catalytic degradation of polystyrene over natural clinoptilolite zeolite

Lee, S. Y., Yoon, J., Kim, J. R., & Park, D. W. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00162-8 · Cited by 108

Catalytic degradation of polymers: Part II—Degradation of polyethylene

Beltrame, P. L., Carniti, P., Audisio, G., & Bertini, F. (1989) · Polymer Degradation and Stability · doi:10.1016/0141-3910(89)90074-8 · Cited by 108

A process study on the pyrolysis of waste polyethylene

Zeaiter, J. (2014) · Fuel · doi:10.1016/j.fuel.2014.05.028 · Cited by 105

The catalytic effect of Red Mud on the degradation of poly (vinyl chloride) containing polymer mixture into fuel oil

Yanık, J., Uddin, M. A., Ikeuchi, K., & Sakata, Y. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00095-7 · Cited by 99

Steam activation of pyrolytic tyre char at different temperatures

López, G., Olazar, M., Artetxe, M., Amutio, M., Elordi, G., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.11.002 · Cited by 97

Heavy oil upgrading: Unlocking the future fuel supply

Demirbaş, A., Bafail, A. O., & Nizami, A. (2016) · Petroleum Science and Technology · doi:10.1080/10916466.2015.1136949 · Cited by 96

Chemical Catalyzed Recycling of Polymers: Catalytic Conversion of PE, PP and PS into Fuels and Chemicals over H-Y

Lerici, L., Renzini, M. S., & Pierella, L. B. (2015) · Procedia Materials Science · doi:10.1016/j.mspro.2015.04.076 · Cited by 90

The Energy and Value-Added Products from Pyrolysis of Waste Plastics

Miandad, R., Rehan, M., Nizami, A., Barakat, M. A. E.-F., & Ismail, I. M. I. (2016) · Environmental footprints and eco-design of products and processes · doi:10.1007/978-981-10-0150-5_12 · Cited by 90

Fast pyrolysis of chicken litter and turkey litter in a fluidized bed reactor

Kim, S.-S., Agblevor, F. A., & Lim, J. (2009) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2008.10.004 · Cited by 89

Novel calcium based sorbent (Ca-C) for the dehalogenation (Br, Cl) process during halogenated mixed plastic (PP/PE/PS/PVC and HIPS-Br) pyrolysis

Bhaskar, T., Matsui, T., Kaneko, J., Uddin, M. A., Muto, A., & Sakata, Y. (2002) · Green Chemistry · doi:10.1039/b203745a · Cited by 89

Thermal degradation of polyethylene mixed with poly(vinyl chloride) and poly(ethyleneterephthalate)

Sakata, Y., Uddin, M. A., Koizumi, K., & Murata, K. (1996) · Polymer Degradation and Stability · doi:10.1016/0141-3910(96)00077-8 · Cited by 88

Determination of wax content in crude oil

Rehan, M., Nizami, A., Taylan, O., Al-Sasi, B. O., & Demirbaş, A. (2016) · Petroleum Science and Technology · doi:10.1080/10916466.2016.1169287 · Cited by 87

Performance of acid treated natural zeolites in catalytic degradation of polypropylene

Hwang, E. Y., Kim, J.-R., Choi, J.-K., Woo, H.-C., & Park, D. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00134-6 · Cited by 83

Waste Polyethylene Terephthalate (PETE-1) Conversion into Liquid Fuel

Sarker, M., Kabir, A., Rashid, M. M., Molla, M., & Mohammad, A. S. (2011) · Journal of Fundamentals of Renewable Energy and Applications · doi:10.4303/jfrea/r101202 · Cited by 82

Application of Waste Plastic Pyrolysis Oil in a Direct Injection Diesel Engine: For a Small Scale Non-Grid Electrification

Lee, S., Yoshida, K., & Yoshikawa, K. (2015) · Energy and Environment Research · doi:10.5539/eer.v5n1p18 · Cited by 81

Synthesis of Petroleum-Based Fuel from Waste Plastics and Performance Analysis in a CI Engine

Cleetus, C., Thomas, S., & Varghese, S. (2013) · Journal of Energy · doi:10.1155/2013/608797 · Cited by 80

Biodegradable waste to biogas: Renewable energy option for the Kingdom of Saudi Arabia

Sadiq, M., & Kaneesamkandi, Z. (2013) · Cited by 77

European trends in the feedstock recycling of plastic wastes

(2013) · Global NEST Journal · doi:10.30955/gnj.000432 · Cited by 76

Thermal and catalytic degradation of pyrolytic oil from pyrolysis of municipal plastic wastes

Lee, K.-H. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.11.032 · Cited by 75

Catalytic cracking of polyethylene over nanocrystalline HZSM-5: Catalyst deactivation and regeneration study

Serrano, D. P., Aguado, J., Rodríguez, J. M., & Peral, Á. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.11.013 · Cited by 72

Pyrolytic liquid fuel: A source of renewable electricity generation in Makkah

Rehan, M., Nizami, A., Shahzad, K., Ouda, O. K. M., Ismail, I. M. I., Almeelbi, T. B., Iqbal, T., & Demirbaş, A. (2016) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2016.1153753 · Cited by 69

Tertiary Recycling of Polyethylene to Hydrocarbon Fuel by Catalytic Cracking over Aluminum Pillared Clays

Manos, G., Yusof, I. Y., Gangas, N. H., & Papayannakos, N. G. (2002) · Energy & Fuels · doi:10.1021/ef0102364 · Cited by 68

Conversion of waste tires to liquid products via sodium carbonate catalytic pyrolysis

Demirbaş, A., Al-Sasi, B. O., & Nizami, A. (2016) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2015.1052598 · Cited by 65

Catalytic recycling of the mixture of polypropylene and polystyrene

Kim, J.-R., Yoon, J.-H., & Park, D. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00266-x · Cited by 63

Catalytic degradation of polyolefins over hexagonal mesoporous silica: Effect of aluminum addition

Chaianansutcharit, S., Katsutath, R., Chaisuwan, A., Bhaskar, T., Nigo, A., Muto, A., & Sakata, Y. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.04.009 · Cited by 61

Waste-to-Hydrogen Energy in Saudi Arabia: Challenges and Perspectives

Miandad, R., Rehan, M., Ouda, O. K. M., Khan, M. Z., Shahzad, K., Ismail, I. M., & Nizami, A. (2016) · Springer eBooks · doi:10.1007/978-81-322-3577-4_11 · Cited by 59

Solid waste management in Saudi Arabia: A review

Anjum, M., Miandad, R., Waqas, M., Tarar, I. A., Alafif, Z. O., Aburiazaiza, A. S., Barakat, M. A. E.-F., & Akhtar, T. (2016) · Cited by 56

Continuous upgrading of a plastics pyrolysis liquid to an environmentally favorable gasoline range product

Joo, H. S., & GUIN, J. A. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(98)00067-8 · Cited by 55

Characteristics of LDPE pyrolysis

Park, J. J., Park, K., Park, J., et al. (2002) · Korean Journal of Chemical Engineering · doi:10.1007/bf02699313 · Cited by 53

Pyrolytic oil production by catalytic pyrolysis of refuse-derived fuels: Investigation of low cost catalysts

Whyte, H. E., Loubar, K., Awad, S., & Tazerout, M. L. (2015) · Fuel Processing Technology · doi:10.1016/j.fuproc.2015.08.022 · Cited by 49

Catalytic Pyrolysis of Municipal Plastic Waste to Fuel with Nickel-loaded Silica-alumina Catalysts

Wang, J., & Wang, L. (2011) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567030903436814 · Cited by 49

Catalytic degradation of polypropylene: effect of dealumination of clinoptilolite catalyst

Kim, J. R., Kim, Y. A., Yoon, J. H., Park, D. W., & Woo, H. C. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00231-2 · Cited by 48

Yield and Composition of Gases and Oils/Waxes from the Feedstock Recycling of Waste Plastic

Williams, P. T. (2006) · doi:10.1002/0470021543.ch11 · Cited by 43

Composition of Liquid Fuels Derived from the Pyrolysis of Plastics

Blazsó, M. (2006) · doi:10.1002/0470021543.ch12 · Cited by 40

Nanocrystalline ZSM-5: a highly active catalyst for polyolefin feedstock recycling

Serrano, D. P., Aguado, J., Escola, J. M., & Rodríguez, J. (2002) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(02)80014-3 · Cited by 39

Lanthania promoted MgO: Simultaneous highly efficient catalytic degradation and dehydrochlorination of polypropylene/polyvinyl chloride

Zhou, Q., Lan, W., Du, A.-K., Wang, Y., Yang, J., Wu, Y., Yang, K., & Wang, X. (2007) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2007.11.018 · Cited by 37

Waste Plastics Mixture of Polystyrene and Polypropylene into Light Grade Fuel using Fe 2 O 3 Catalyst

Sarker, M., Mcic, Ficer, MInstP, Mrsc, & Farss. (2013) · Cited by 37

Liquid-phase catalytic degradation of polyethylene wax over MFI zeolites with different particle sizes

You, Y. S., Kim, J., & Seo, G. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00130-0 · Cited by 36

Thermal pyrolysis of polypropylene: effect of reflux-condenser on the molecular weight distribution of products

Seth, D., & Sarkar, A. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2004.03.008 · Cited by 35

Effect of Blend Ratio of Plastic Pyrolysis Oil and Diesel Fuel on the Performance of Single Cylinder CI Engine

Nileshkumar, K. D., Jani, R. J., Patel, T. M., & Rathod, G. P. (2015) · International Journal For Science Technology And Engineering · Cited by 32

Activation of waste tire char by cyclic liquid-phase oxidation

Heras, F., Jimenez-Cordero, D., Gilarranz, M. A., Alonso-Morales, N., & Rodriguez, J. J. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.06.018 · Cited by 30

The effects of controlled aging and blending of low- and high-density polyethylenes, polypropylene and polystyrene on their thermal degradation studied by pyrolysis gas chromatography

Doležal, Z., Pacáková, V., & Kovářová, J. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00107-8 · Cited by 29

The influence of blending process on the quality of rapeseed oil-used cooking oil biodiesels

Gardy, J., Hassanpour, A., Lai, X., Cunliffe, A. M., & Rehan, M. (2014) · White Rose Research Online (University of Leeds, The University of Sheffield, University of York) · Cited by 29

Individual and simultaneous degradation of brominated high impact polystyrene and brominated acrylonitrile-butadiene-styrene and removal of heteroelements (Br, N, and O) from degradation oil by multiphase catalytic systems

Mitan, N. M. M., Brebu, M. A., Bhaskar, T., Muto, A., & Sakata, Y. (2007) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-006-0159-4 · Cited by 27

Performance and Emission Test of Several Blends of Waste Plastic Oil with Diesel and Ethanol on Four Stroke Twin Cylinder Diesel Engine

Mukherjee, M. K., & Thamotharan, C. (2014) · IOSR Journal of Mechanical and Civil Engineering · doi:10.9790/1684-11214751 · Cited by 17

Physico-chemical characterization of chars produced in the co-pyrolysis of wastes and possible routes of valorisation

Bernardo, M. (2011) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 11

Pyrolysis of Waste Plastics and Whole Combustible Components Separated From Municipal Solid Wastes: Comparison of Products and Emissions

Zhao, L. Q., De, C., Wang, Z., Ma, X., & Zhou, G. (2017) · Apple Academic Press eBooks · doi:10.1201/b19983-11 · Cited by 9

A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)

Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.03.084 · Cited by 1,200

Impacts of Plastic Pollution on Ecosystem Services, Sustainable Development Goals, and Need to Focus on Circular Economy and Policy Interventions

Kumar, R., Verma, A., Shome, A., Sinha, R., Sinha, S., Jha, P. K., Kumar, R., Kumar, P., Shubham, Das, S., et al. (2021) · Sustainability · doi:10.3390/su13179963 · Cited by 1,111

Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review

Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897

Plastic waste and its management strategies for environmental sustainability

Evode, N., Qamar, S. A., Bilal, M., Barceló, D., & Iqbal, H. M. N. (2021) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2021.100142 · Cited by 800

The chemistry of chemical recycling of solid plastic waste via pyrolysis and gasification: State-of-the-art, challenges, and future directions

Dogu, O., Pelucchi, M., Van de Vijver, R., Van Steenberge, P. H. M., D'hooge, D. R., Cuoci, A., Mehl, M., Frassoldati, A., Faravelli, T., & Van Geem, K. M. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100901 · Cited by 698