The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Ignition delay time and laminar flame speed measurements of ammonia blended with dimethyl ether: A promising low carbon fuel blend
Open accessAbstract
Abstract Ammonia (NH3) has recently received much attention as a promising future fuel for mobility and power generation. The use of ammonia as a fueling vector can help curb global warming by cutting CO2 emissions because it is a carbon-free fuel and a hydrogen carrier with a high percentage of hydrogen atoms per unit volume. Liquid ammonia contains a higher volumetric density of hydrogen than liquid hydrogen. The low reactivity of ammonia, however, hinders its direct usage as a combustible fuel. One feasible way to boost the reactivity of ammonia is to target a dual-fuel system comprising of ammonia and a suitable combustion promoter. In this work, combustion properties of ammonia were investigated by blending it with various proportions of dimethyl ether (DME) using a rapid compression machine (RCM) and a constant volume spherical reactor (CVSR) over a wide range of experimental conditions. DME is a highly reactive fuel that may be produced in a sustainable carbon cycle with a net zero-carbon emission. Ignition delay times (IDTs) of NH3/DME blends were measured over a temperature (T) range of 649–950 K, pressures (P) of 20 and 40 bar, equivalence ratios (Φ) of 0.5 and 1 for a range of DME mole fractions (χDME) of 0.05–0.5 in the blends. In addition, the laminar burning velocities of NH3/DME blends were measured at P = 1, 3 and 5 bar, Φ = 0.8 to Φ = 1.3 and T = 300 K for χDME ranging 0.18 to 0.47. Our results suggest that DME is a good ignition promoter, resulting in a significant shortening of IDTs and an increase of flame speeds of NH3. A detailed chemical model has been developed and validated against the experimental data. Overall, our kinetic model offered reasonable predictive capabilities capturing the experimental trends over a wide range of conditions. In the worst-case scenario, our model underpredicted IDTs by a factor of ∼2.5 while overpredicting laminar flame speed by ∼20%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Valera-Medina, A., Xiao, H., Owen-Jones, M., David, W. I. F., & Bowen, P. J. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.07.001 · Cited by 2,730
Modeling nitrogen chemistry in combustion
Glarborg, P., Miller, J. A., Ruscic, B., & Klippenstein, S. J. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.01.002 · Cited by 1,998
Kuo, K. K. (1986) · Cited by 1,855
Experimentation and Uncertainty Analysis for Engineers
Coleman, H. W., Steck, W. G., & Hurlbut, F. C. (1991) · Journal of Engineering for Industry · doi:10.1115/1.2899692 · Cited by 1,805
Evaluated Kinetic Data for Combustion Modeling: Supplement II
Baulch, D. L., Bowman, C. T., Cobos, C. J., Cox, R. A., Just, T., Kerr, J. A., Pilling, M. J., Stocker, D., Troe, J., Tsang, W., et al. (2005) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.1748524 · Cited by 1,457
Experimental and numerical study of the laminar burning velocity of CH4–NH3–air premixed flames
Okafor, E. C., Naito, Y., Colson, S., Ichikawa, A., Kudo, T., Hayakawa, A., & Kobayashi, H. (2018) · Combustion and Flame · doi:10.1016/j.combustflame.2017.09.002 · Cited by 1,068
Review on Ammonia as a Potential Fuel: From Synthesis to Economics
Valera-Medina, A., Amer-Hatem, F., Azad, A. K., Dedoussi, I. C., de Joannon, M., Fernandes, R. X., Glarborg, P., Hashemi, H., He, X., Mashruk, S., et al. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03685 · Cited by 1,061
Ranzi, E., Frassoldati, A., Grana, R., et al. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.03.004 · Cited by 1,027
Laminar burning velocity and Markstein length of ammonia/air premixed flames at various pressures
Hayakawa, A., Goto, T., Mimoto, R., Arakawa, Y., Kudo, T., & Kobayashi, H. (2015) · Fuel · doi:10.1016/j.fuel.2015.06.070 · Cited by 854
Global warming: review on driving forces and mitigation
Al‐Ghussain, L. (2019) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.13041 · Cited by 795
Mathieu, O., & Petersen, E. L. (2015) · Combustion and Flame · doi:10.1016/j.combustflame.2014.08.022 · Cited by 768
An experimental, theoretical and kinetic-modeling study of the gas-phase oxidation of ammonia
Stagni, A., Cavallotti, C., Arunthanayothin, S., Song, Y., Herbinet, O., Battin-Leclerc, F., & Faravelli, T. (2020) · Reaction Chemistry & Engineering · doi:10.1039/c9re00429g · Cited by 742
Shrestha, K. P., Lhuillier, C., Barbosa, A. A., Brequigny, P., Contino, F., Mounaïm-Rousselle, C., Seidel, L., & Mauss, F. (2021) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2020.06.197 · Cited by 641
Self-citationOkafor, E. C., Naito, Y., Colson, S., Ichikawa, A., Kudo, T., Hayakawa, A., & Kobayashi, H. (2019) · Combustion and Flame · doi:10.1016/j.combustflame.2019.03.008 · Cited by 593
Lhuillier, C., Brequigny, P., Lamoureux, N., Contino, F., & Mounaïm-Rousselle, C. (2020) · Fuel · doi:10.1016/j.fuel.2019.116653 · Cited by 490
Thermal decomposition reaction and a comprehensive kinetic model of dimethyl ether
Zhao, Z., Chaos, M., Kazakov, A., & Dryer, F. L. (2008) · International Journal of Chemical Kinetics · doi:10.1002/kin.20285 · Cited by 486
Burke, U., Somers, K. P., O’Toole, P., Zinner, C. M., Marquet, N., Bourque, G., Petersen, E. L., Metcalfe, W. K., Serinyel, Z., & Curran, H. J. (2015) · Combustion and Flame · doi:10.1016/j.combustflame.2014.08.014 · Cited by 466
Shrestha, K. P., Seidel, L., Zeuch, T., & Mauss, F. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b01056 · Cited by 441
Self-citationCombustion Chemistry of Nitrogen
Dean, A. M., & Bozzelli, J. W. (2000) · Springer eBooks · doi:10.1007/978-1-4612-1310-9_2 · Cited by 412
Ammonia oxidation at high pressure and intermediate temperatures
Song, Y., Hashemi, H., Christensen, J. M., Zou, C., Marshall, P., & Glarborg, P. (2016) · Fuel · doi:10.1016/j.fuel.2016.04.100 · Cited by 410
Gross, C. W., & Kong, S.-C. (2013) · Fuel · doi:10.1016/j.fuel.2012.08.026 · Cited by 388
On the determination of laminar flame speeds from stretched flames
Wu, C., & Law, C. K. (1985) · Symposium (International) on Combustion · doi:10.1016/s0082-0784(85)80693-7 · Cited by 379
He, X., Shu, B., Nascimento, D., Moshammer, K., Costa, M., & Fernandes, R. X. (2019) · Combustion and Flame · doi:10.1016/j.combustflame.2019.04.050 · Cited by 370
Extreme weather events and climate change concern
Konisky, D. M., Hughes, L., & Kaylor, C. H. (2016) · Climatic Change · doi:10.1007/s10584-015-1555-3 · Cited by 367
Wang, S., Wang, Z., Elbaz, A. M., Han, X., He, Y., Costa, M., Konnov, A. A., & Roberts, W. L. (2020) · Combustion and Flame · doi:10.1016/j.combustflame.2020.08.004 · Cited by 342
Self-citationCombustion and emissions of a DI diesel engine fuelled with diesel-oxygenate blends
Ren, Y., Huang, Z., Miao, H., Di, Y., Jiang, D., Zeng, K., Liu, B., & Wang, X. (2008) · Fuel · doi:10.1016/j.fuel.2008.02.017 · Cited by 331
Effect of hydrogen blending on the high temperature auto-ignition of ammonia at elevated pressure
Chen, J., Jiang, X., Qin, X., & Huang, Z. (2021) · Fuel · doi:10.1016/j.fuel.2020.119563 · Cited by 331
Dai, L., Gersen, S., Glarborg, P., Levinsky, H. B., & Mokhov, A. V. (2020) · Combustion and Flame · doi:10.1016/j.combustflame.2020.01.023 · Cited by 295
Dai, L., Hashemi, H., Glarborg, P., Gersen, S., Marshall, P., Mokhov, A., & Levinsky, H. (2021) · Combustion and Flame · doi:10.1016/j.combustflame.2020.12.048 · Cited by 282
Zhang, Y., Mathieu, O., Petersen, E. L., Bourque, G., & Curran, H. J. (2017) · Combustion and Flame · doi:10.1016/j.combustflame.2017.03.019 · Cited by 268
Electrification of light-duty vehicle fleet alone will not meet mitigation targets
Milovanoff, A., Posen, I. D., & MacLean, H. L. (2020) · Nature Climate Change · doi:10.1038/s41558-020-00921-7 · Cited by 251
Shu, B., Vallabhuni, S. K., He, X., Issayev, G., Moshammer, K., Farooq, A., & Fernandes, R. X. (2019) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2018.07.074 · Cited by 234
Self-citationAutoignition studies of NH3/CH4 mixtures at high pressure
Dai, L., Gersen, S., Glarborg, P., Mokhov, A., & Levinsky, H. (2020) · Combustion and Flame · doi:10.1016/j.combustflame.2020.04.020 · Cited by 234
Pochet, M., Dias, V., Moreau, B., Foucher, F., Jeanmart, H., & Contino, F. (2019) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2018.05.138 · Cited by 228
Combustion behavior of ammonia blended with diethyl ether
Issayev, G., Giri, B. R., Elbaz, A. M., Shrestha, K. P., Mauss, F., Roberts, W. L., & Farooq, A. (2021) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2020.06.337 · Cited by 171
Self-citationFeng, Y., Zhu, J., Mao, Y., Raza, M., Qian, Y., Yu, L., & Lu, X. (2020) · Fuel · doi:10.1016/j.fuel.2020.118761 · Cited by 151
Effect of gravity on laminar premixed gas combustion I: Flammability limits and burning velocities
Ronney, P. D., & Wachman, H. Y. (1985) · Combustion and Flame · doi:10.1016/0010-2180(85)90139-7 · Cited by 148
Pan, X., Wang, H., Wang, L., & Chen, W. (2018) · Energy · doi:10.1016/j.energy.2018.04.144 · Cited by 148
Elbaz, A. M., Giri, B. R., Issayev, G., Shrestha, K. P., Mauß, F., Farooq, A., & Roberts, W. L. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c02269 · Cited by 144
Self-citationGas-Phase Combustion Chemistry
(2000) · doi:10.1007/978-1-4612-1310-9 · Cited by 136
Numerical simulation of ammonia/methane/air combustion using reduced chemical kinetics models
Mikulčić, H., Baleta, J., Wang, X., Wang, J., Qi, F., & Wang, F. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.01.109 · Cited by 108
Perspectives on decarbonizing the transport sector in the EU-28
Haasz, T., Vilchez, J. J. G., Kunze, R., Deane, P., Fraboulet, D., Fahl, U., & Mulholland, E. (2018) · Energy Strategy Reviews · doi:10.1016/j.esr.2017.12.007 · Cited by 83
Chen, Z., & Jiang, Y. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.01.054 · Cited by 82
Rate Constant Calculations of H-Atom Abstraction Reactions from Ethers by HȮ2 Radicals
Mendes, J., Zhou, C., & Curran, H. J. (2014) · The Journal of Physical Chemistry A · doi:10.1021/jp412496g · Cited by 73
Direction Dynamics Study of the Hydrogen Abstraction Reaction CH2O + NH2 → CHO + NH3
Li, Q. S., & Lü, R. H. (2002) · The Journal of Physical Chemistry A · doi:10.1021/jp026560x · Cited by 42
Colbertaldo, P., Cerniauskas, S., Grube, T., Robinius, M., Stolten, D., & Campanari, S. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110086 · Cited by 26
Cited by
Review on the recent advances on ammonia combustion from the fundamentals to the applications
Elbaz, A. M., Wang, S., Guiberti, T. F., & Roberts, W. L. (2022) · Fuel Communications · doi:10.1016/j.jfueco.2022.100053 · Cited by 639
Self-citationAmmonia combustion and emissions in practical applications: A review
Alnajideen, M., Shi, H., Northrop, W., Emberson, D., Kane, S., Czyzewski, P., Alnaeli, M., Mashruk, S., Rouwenhorst, K., Yu, C., et al. (2024) · Carbon Neutrality · doi:10.1007/s43979-024-00088-6 · Cited by 146
Estevez, R., López-Tenllado, F. J., Aguado-Deblas, L., Bautista, F. M., Romero, A. A., & Luna, D. (2023) · Energies · doi:10.3390/en16145451 · Cited by 55
Metadata
- Authors
- Issayev, G., Giri, B. R., Elbaz, A. M., Shrestha, K. P., Mauss, F., Roberts, W. L., & Farooq, A.
- Venue
- Renewable Energy
- Publisher
- Elsevier BV
- Published
- 2022-01
- Volume
- 181
- Pages
- 1353-1370
- ISSN
- 0960-1481 (ISSN-L)
- OpenAlex
- W3202547265
- Cited by
- 256
- References
- 46
- FWCI
- 16.45
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.