The DOI matches its Crossref record; 101 of the 101 references it cites were found in a registry or an index.
Targets for a circular economy
Open accessAbstract
The transition to a circular economy requires actions and policies. In the praxis of governance, a common way to steer the transition to a different state proceeds through the setting of targets. Thus far, no study has investigated circular economy targets in a systematic way. To bridge this gap, this study examines which targets can facilitate the transition towards a circular economy. The analysis focuses both on existing and new targets; the latter complement existing targets which are limited to a few discrete cases addressing only partially the goal of a more circular economy. A framework based on 10 common circular economy strategies (i.e. recover, recycling, repurpose, remanufacture, refurbish, repair, re-use, reduce, rethink, refuse) is applied to scrutinise the selected targets. The study clarifies that existing targets for recovery and recycling do not necessarily promote a circular economy, though they are the most commonly applied targets so far. Because of lack of efficacy of recovery and recycling, targets should instead favour other more powerful circular economy strategies. In relation to these, the study looks into new and existing targets showing how they can reduce waste, increase efficiency, close production loops, and maximise retention of the economic value of materials and products. In particular, the study proposes an expanded set of brand new targets for the transition to a circular economy together with a fresh view on targets aimed at scholars and decision-makers alike.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conceptualizing the circular economy: An analysis of 114 definitions
Kirchherr, J., Reike, D., & Hekkert, M. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.005 · Cited by 8,550
Ghisellini, P., Cialani, C., & Ulgiati, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.007 · Cited by 6,536
Murray, A., Skene, K., & Haynes, K. (2017) · Journal of Business Ethics · doi:10.1007/s10551-015-2693-2 · Cited by 3,328
Towards circular economy implementation: A comprehensive review in context of manufacturing industry
Lieder, M., & Rashid, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.042 · Cited by 2,762
More evolution than revolution: transition management in public policy
Rotmans, J., Kemp, R., & van Asselt, M. (2001) · Foresight · doi:10.1108/14636680110803003 · Cited by 2,100
Why do firms differ, and how does it matter?
Nelson, R. R. (1991) · Strategic Management Journal · doi:10.1002/smj.4250121006 · Cited by 1,970
Product services for a resource-efficient and circular economy – a review
Tukker, A. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.11.049 · Cited by 1,961
Reike, D., Vermeulen, W. J. V., & Witjes, S. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.08.027 · Cited by 1,886
Designing the Business Models for Circular Economy—Towards the Conceptual Framework
Lewandowski, M. (2016) · Sustainability · doi:10.3390/su8010043 · Cited by 1,610
WHAT’S MEASURED IS WHAT MATTERS: TARGETS AND GAMING IN THE ENGLISH PUBLIC HEALTH CARE SYSTEM
BEVAN, G., & HOOD, C. (2006) · Public Administration · doi:10.1111/j.1467-9299.2006.00600.x · Cited by 1,580
A review of the circular economy in China: moving from rhetoric to implementation
Su, B., Heshmati, A., Geng, Y., & Yu, X. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.11.020 · Cited by 1,429
Circular economy—From review of theories and practices to development of implementation tools
Kalmykova, Y., Sadagopan, M., & Rosado, L. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.034 · Cited by 1,412
Towards a consensus on the circular economy
Prieto-Sandoval, V., Jaca, C., & Ormazabal, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.224 · Cited by 1,282
A review and typology of circular economy business model patterns
Lüdeke‐Freund, F., Gold, S., & Bocken, N. M. P. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12763 · Cited by 1,256
Zink, T., & Geyer, R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12545 · Cited by 1,210
Lost in transition? Drivers and Barriers in the Eco-innovation Road to the Circular Economy
de Jesus, A., & Mendonça, S. (2018) · Ecological Economics · doi:10.1016/j.ecolecon.2017.08.001 · Cited by 1,167
Haas, W., Krausmann, F., Wiedenhofer, D., & Heinz, M. (2015) · Journal of Industrial Ecology · doi:10.1111/jiec.12244 · Cited by 1,154
An Introduction to Predictive Maintenance
(2002) · Elsevier eBooks · doi:10.1016/b978-0-7506-7531-4.x5000-3 · Cited by 1,151
Production planning and control for remanufacturing: industry practice and research needs
Guide, V. D. R. (2000) · Journal of Operations Management · doi:10.1016/s0272-6963(00)00034-6 · Cited by 1,098
Material efficiency: A white paper
Allwood, J. M., Ashby, M. F., Gutowski, T. G., & Worrell, E. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2010.11.002 · Cited by 927 · cited 1×
“However, Rethink has a wider connotation, because it includes the re-elaboration/reconceptualisation of ideas, dynamics, processes, concepts, uses, and post uses of a product (e.g. Clift and Allwood, 2011; Andrews, 2015; Kristensen et al., 2016; Linder, 2017).”
BackgroundMeasuring circular economy strategies through index methods: A critical analysis
Elia, V., Gnoni, M. G., & Tornese, F. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.196 · Cited by 892
C HARACTERIZING AND M EASURING S USTAINABLE D EVELOPMENT
Parris, T. M., & Kates, R. W. (2003) · Annual Review of Environment and Resources · doi:10.1146/annurev.energy.28.050302.105551 · Cited by 885
Strategic Management and Business Policy
Wheelen, T. L., & Hunger, J. D. (2005) · Cited by 843
(2013) · Bankrupting Nature · doi:10.4324/9780203107980-24 · Cited by 811
The circular economy umbrella: Trends and gaps on integrating pathways
Homrich, A. S., Galvão, G., Abadia, L. G., & Carvalho, M. M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.064 · Cited by 810
Circular Economy: Measuring Innovation in the Product Chain
Potting, J., Hekkert, M. P., Worrell, E., & Hanemaaijer, A. (2017) · Utrecht University Repository (Utrecht University) · Cited by 796
Carrots, Sticks and Sermons: Policy Instruments and Their Evaluation
Bemelmans-Videc, M.-L. (2003) · Radboud Repository (Radboud University) · Cited by 772
Interrogating the circular economy: The moral economy of resource recovery in the EU
Gregson, N., Crang, M., Fuller, S., & Holmes, H. (2015) · Economy and Society · doi:10.1080/03085147.2015.1013353 · Cited by 743
Product Design in a Circular Economy: Development of a Typology of Key Concepts and Terms
den Hollander, M. C., Bakker, C. A., & Hultink, E. J. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12610 · Cited by 736
Circular Economy Policies in China and Europe
McDowall, W., Geng, Y., Huang, B., Barteková, E., Bleischwitz, R., Türkeli, S., Kemp, R., & Doménech, T. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12597 · Cited by 709
Ranta, V., Aarikka-Stenroos, L., Ritala, P., & Mäkinen, S. J. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.08.017 · Cited by 674
Biofuels securing the planet’s future energy needs
Demirbas, A. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.05.010 · Cited by 606
Bressanelli, G., Perona, M., & Saccani, N. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1542176 · Cited by 593
Policy Instruments: Typologies and Theories
Vedung, E. (2017) · Carrots, Sticks & Sermons · doi:10.4324/9781315081748-2 · Cited by 572
Zhu, Q., Geng, Y., & Lai, K.-H. (2010) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.02.013 · Cited by 569
Unlocking value for a circular economy through 3D printing: A research agenda
Despeisse, M., Baumers, M., Brown, P., Charnley, F., Ford, S. J., Garmulewicz, A., Knowles, S., Minshall, T. H. W., Mortara, L., Reed-Tsochas, F. P., et al. (2017) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2016.09.021 · Cited by 529
Circular Economy in the building sector: Three cases and a collaboration tool
Leising, E., Quist, J., & Bocken, N. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.010 · Cited by 527
Coming Full Circle: Why Social and Institutional Dimensions Matter for the Circular Economy
Moreau, V., Sahakian, M., van Griethuysen, P., & Vuille, F. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12598 · Cited by 525
Slower Consumption Reflections on Product Life Spans and the “Throwaway Society”
Cooper, T. (2005) · Journal of Industrial Ecology · doi:10.1162/1088198054084671 · Cited by 509
Reducing waste: repair, recondition, remanufacture or recycle?
King, A. M., Burgess, S. C., Ijomah, W., & McMahon, C. A. (2006) · Sustainable Development · doi:10.1002/sd.271 · Cited by 502
Do circular economy business models capture intended environmental value propositions?
Manninen, K., Koskela, S., Antikainen, R., Bocken, N., Dahlbo, H., & Aminoff, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.003 · Cited by 488
Smol, M., Kulczycka, J., Henclik, A., Gorazda, K., & Wzorek, Z. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.051 · Cited by 487
Skills and capabilities for a sustainable and circular economy: The changing role of design
De los Rios, I. C., & Charnley, F. J. S. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.130 · Cited by 479
A Metric for Quantifying Product‐Level Circularity
Linder, M., Sarasini, S., & van Loon, P. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12552 · Cited by 475
Resource recovery from post-consumer waste: important lessons for the upcoming circular economy
Singh, J., & Ordoñez, I. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.020 · Cited by 467
Advancing to a Circular Economy: three essential ingredients for a comprehensive policy mix
Milios, L. (2018) · Sustainability Science · doi:10.1007/s11625-017-0502-9 · Cited by 440
The circular economy, design thinking and education for sustainability
Andrews, D. (2015) · Local Economy: The Journal of the Local Economy Policy Unit · doi:10.1177/0269094215578226 · Cited by 437
Biofuels: securing the planet's future energy needs
(2009) · Choice Reviews Online · doi:10.5860/choice.46-5632 · Cited by 435
Sustainable materials with both eyes open
(2013) · Choice Reviews Online · doi:10.5860/choice.50-3871 · Cited by 434
Circular Business Models: Defining a Concept and Framing an Emerging Research Field
Nußholz, J. (2017) · Sustainability · doi:10.3390/su9101810 · Cited by 415 · cited 1×
“…Kirchherr et al., 2017; Kalmykova et al., 2018; Prieto-Sandoval et al., 2018; Homrich et al., 2018); by CE business models (e.g. Lewandowski, 2016; Nußholz, 2017; Lüdeke-Freund et al., 2019; Manninen et al., 2018; Hofmann, 2019); by drivers and barriers (e.g. Ranta et al., 2018; De Jesus and…”
BackgroundRestorative and regenerative: Exploring the concepts in the circular economy
Morseletto, P. (2020) · Journal of Industrial Ecology · doi:10.1111/jiec.12987 · Cited by 407
Self-citationA comprehensive review of the development of zero waste management: lessons learned and guidelines
Zaman, A. U. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.12.013 · Cited by 387
Supply Chain Configurations in the Circular Economy: A Systematic Literature Review
Masi, D., Day, S., & Godsell, J. (2017) · Sustainability · doi:10.3390/su9091602 · Cited by 378
Life cycle assessment of thermal Waste-to-Energy technologies: Review and recommendations
Astrup, T. F., Tonini, D., Turconi, R., & Boldrin, A. (2015) · Waste Management · doi:10.1016/j.wasman.2014.06.011 · Cited by 350 · cited 2×
“, this study looks at incineration, which is the most diffused form of recovery for size and source range (Astrup et al., 2015).”
BackgroundCircular Economy: Theoretical Benchmark or Perpetual Motion Machine?
Cullen, J. M. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12599 · Cited by 349
Circular economy design considerations for research and process development in the chemical sciences
Clark, J. H., Farmer, T. J., Herrero-Davila, L., & Sherwood, J. (2016) · Green Chemistry · doi:10.1039/c6gc00501b · Cited by 344
Mayer, A., Haas, W., Wiedenhofer, D., Krausmann, F., Nuss, P., & Blengini, G. A. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12809 · Cited by 339
The Environmental Impacts of Reuse: A Review
Cooper, D. R., & Gutowski, T. G. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12388 · Cited by 337
International comparative study of 3R and waste management policy developments
Sakai, S.-I., Yoshida, H., Hirai, Y., Asari, M., Takigami, H., Takahashi, S., Tomoda, K., Peeler, M. V., Wejchert, J., Schmid-Unterseh, T., et al. (2011) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-011-0009-x · Cited by 309
Maintenance performance measurement (MPM): issues and challenges
Parida, A., & Kumar, U. (2006) · Journal of Quality in Maintenance Engineering · doi:10.1108/13552510610685084 · Cited by 303
Common Misconceptions about Recycling
Geyer, R., Kuczenski, B., Zink, T., & Henderson, A. (2016) · Journal of Industrial Ecology · doi:10.1111/jiec.12355 · Cited by 299
Circular business models: Business approach as driver or obstructer of sustainability transitions?
Hofmann, F. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.115 · Cited by 298
Handbook of recycled concrete and demolition waste
Pacheco-Torgal, F., Tam, V. W. Y., Labrincha, J. A., Ding, Y., & de Brito, J. (2013) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857096906 · Cited by 297
Design for Environmental Sustainability
Vezzoli, C. A. (2018) · Springer eBooks · doi:10.1007/978-1-4471-7364-9 · Cited by 276
Allwood, J. M. (2014) · Handbook of Recycling · doi:10.1016/b978-0-12-396459-5.00030-1 · Cited by 266
Jayaraman, V. (2006) · International Journal of Production Research · doi:10.1080/00207540500250507 · Cited by 241
The Politics of Public Service Bargains: Reward, Competency, Loyalty - and Blame
Hood, C., & Lodge, M. C. (2006) · London School of Economics and Political Science Theses Online (London School of Economics and Political Science) · Cited by 214
Jensen, P. D., Basson, L., Hellawell, E. E., Bailey, M. R., & Leach, M. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.02.003 · Cited by 210
Sousa-Zomer, T. T., Magalhães, L., Zancul, E., & Cauchick-Miguel, P. A. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.033 · Cited by 189
In search of standards to support circularity in product policies: A systematic approach
Tecchio, P., McAlister, C., Mathieux, F., & Ardente, F. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.198 · Cited by 179
Niero, M., & Olsen, S. I. (2016) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.06.023 · Cited by 176
Longer Lasting Products. Alternatives to the Throwaway Society
(2011) · Journal of Product & Brand Management · doi:10.1108/10610421111181877 · Cited by 175
Haupt, M., & Zschokke, M. (2017) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-017-1267-1 · Cited by 172
Conceptualizing ReX for Aggregating End-of-life Strategies in Product Development
Sihvonen, S., & Ritola, T. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.01.026 · Cited by 161
Design for Environmental Sustainability
(2008) · Springer eBooks · doi:10.1007/978-1-84800-163-3 · Cited by 160
Evaluating the sustainability impacts of packaging: the plastic carry bag dilemma
Lewis, H., Verghese, K., & Fitzpatrick, L. (2010) · Packaging Technology and Science · doi:10.1002/pts.886 · Cited by 144
Is Earth recognized as a finite system in corporate responsibility reporting?
Bjørn, A., Bey, N., Georg, S., Røpke, I., & Hauschild, M. Z. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.095 · Cited by 143
Propelling plastics into the circular economy — weeding out the toxics first
Leslie, H. A., Leonards, P. E. G., Brandsma, S. H., de Boer, J., & Jonkers, N. (2016) · Environment International · doi:10.1016/j.envint.2016.05.012 · Cited by 132 · cited 1×
“Targets should include an explicitly environmental component, such as the reduction of emissions, toxicity, or negative environmental impacts among others (Allwood et al., 2012; EMF, 2013; Leslie et al., 2016).”
BackgroundClosing the loop on circular economy research: From theory to practice and back again
Babbitt, C. W., Gaustad, G., Fisher, A., Chen, W.-Q., & Liu, G. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.012 · Cited by 116
Akenji, L., Bengtsson, M., Bleischwitz, R., Tukker, A., & Schandl, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.071 · Cited by 100
Governing by targets: reductio ad unum and evolution of the two-degree climate target
Morseletto, P., Biermann, F., & Pattberg, P. H. (2016) · International Environmental Agreements Politics Law and Economics · doi:10.1007/s10784-016-9336-7 · Cited by 100
Self-citationInfluence of Input‐Scrap Quality on the Environmental Impact of Secondary Steel Production
Haupt, M., Vadenbo, C., Zeltner, C., & Hellweg, S. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12439 · Cited by 83
Remanufacturing and product design: designing for the 7th generation
Charter, M., & Gray, C. (2007) · Cited by 82
Allwood, J., et al. (2014) · Cambridge University Engineering Department Publications Database · Cited by 82
The Socio-Economic Embeddedness of the Circular Economy: An Integrative Framework
Laurenti, R., Singh, J., Frostell, B. M., Sinha, R., & Binder, C. R. (2018) · Sustainability · doi:10.3390/su10072129 · Cited by 76
Beyond Planned Obsolescence: Product Lifespans and the Challenges to a Circular Economy
Wieser, H. (2016) · GAIA - Ecological Perspectives for Science and Society · doi:10.14512/gaia.25.3.5 · Cited by 73
Kristensen, D. K., Kjeldsen, C., & Thorsøe, M. H. (2016) · Journal of Agricultural and Environmental Ethics · doi:10.1007/s10806-016-9632-9 · Cited by 70
Sihvonen, S., & Partanen, J. P. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.047 · Cited by 68
LACK OF CONGRUENCE BETWEEN EUROPEAN CITIZEN PERSPECTIVES AND POLICIES ON CIRCULAR ECONOMY
Repo, P., Anttonen, M., Mykkänen, J., & Lammi, M. (2018) · European Journal of Sustainable Development · doi:10.14207/ejsd.2018.v7n1p249 · Cited by 64
Ripe for disruption: reimagining the role of green chemistry in a circular economy
Linder, M. (2017) · Green Chemistry Letters and Reviews · doi:10.1080/17518253.2017.1392618 · Cited by 63
THE DOUBLE LIFE OF TARGETS IN PUBLIC POLICY : DISCIPLINING AND SIGNALLING IN UK ASYLUM POLICY
Boswell, C. (2014) · Public Administration · doi:10.1111/padm.12134 · Cited by 52
Resource Targets in Europe and Worldwide: An Overview
Bahn‐Walkowiak, B., & Steger, S. (2015) · Resources · doi:10.3390/resources4030597 · Cited by 52
Development of Circular Economy in China
Jian-guo, Q., Zhao, J., Li, W., Peng, X., Wu, B., & Hong, W. (2016) · Research series on the Chinese dream and China's development path · doi:10.1007/978-981-10-2466-5 · Cited by 48
Re-evaluating Obsolescence and Planning for It
Burns, B. (2016) · doi:10.4324/9781315592930-11 · Cited by 42
The Significance of Product Longevity
Cooper, T. (2016) · Nottingham Trent University's Institutional Repository (Nottingham Trent Repository) · doi:10.4324/9781315592930-9 · Cited by 40
Routledge Handbook of Sustainable Product Design
Chapman, J. (2017) · Routledge eBooks · doi:10.4324/9781315693309 · Cited by 38
Introduction to the recycling of construction and demolition waste (CDW)
Pacheco-Torgal, F. (2013) · Elsevier eBooks · doi:10.1533/9780857096906.1 · Cited by 29
Tuominen, A., & Himanen, V. (2007) · Transport Policy · doi:10.1016/j.tranpol.2007.04.002 · Cited by 29
Kaźmierczyk, P., Geerken, T., Bahn‐Walkowiak, B., et al. (2016) · Publication Server of the Wuppertal Institute (Wuppertal Institute) · Cited by 29
Routledge Handbook of Sustainable Product Design
Schoormans, J. P. L. (2018) · The Design Journal · doi:10.1080/14606925.2018.1467661 · Cited by 21
Framework for analysing resource-efficient solutions
Willskytt, S., Böckin, D., André, H., Söderman, M. L., & Tillman, A. (2016) · Chalmers Research (Chalmers University of Technology) · Cited by 16
Research works printed but not linked: 8
- Blichert-Toft, 2017, Geochemical perspectives, Future Glob. Miner. Resour., 6, 1
- Clift, 2011, Rethinking the economy, Chem. Eng., 837, 30
- Jani, 2014, Waste glass in the production of cement and concrete–a review, J. Environ. Chem. Eng., 2, 1767, 10.1016/j.jece.2014.03.016 · doi:10.1016/j.jece.2014.03.016
- Jawahir, 2007, Sustainable manufacturing processes: new challenges for developing predictive models and optimization techniques, Proc. 1st-International Conference on Sustainable Manufacturing, 18–19/10/2007, 1
- Karvonen, 2017, Identifying recommendations to promote remanufacturing in Europe, J. Remanufact., 7, 159, 10.1007/s13243-017-0038-2 · doi:10.1007/s13243-017-0038-2
- Lund, 1998, Remanufacturing: an American resource, Proceedings of the Fifth International Congress Environmentally Conscious Design and Manufacturing
- Santini, 2010, Assessment of Ecodesign potential in reaching new recycling targets, Resour. Conserv. Recycl., 54, 1128, 10.1016/j.resconrec.2010.03.006 · doi:10.1016/j.resconrec.2010.03.006
- Wang, 2013, Policies and perspective on end-of-life vehicles in China, J. Clean. Prod., 44, 168, 10.1016/j.jclepro.2012.11.036 · doi:10.1016/j.jclepro.2012.11.036
Cited by
Bag, S., Pretorius, J. H. C., Gupta, S., & Dwivedi, Y. K. (2021) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2020.120420 · Cited by 910
Sustainable Development Goals (SDGs) as a Framework for Corporate Social Responsibility (CSR)
Fallah Shayan, N., Mohabbati-Kalejahi, N., Alavi, S., & Zahed, M. A. (2022) · Sustainability · doi:10.3390/su14031222 · Cited by 615
Sharma, H. B., Vanapalli, K. R., Samal, B., Cheela, V. R. S., Dubey, B. K., & Bhattacharya, J. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.149605 · Cited by 520
Bag, S., & Pretorius, J. H. C. (2022) · International Journal of Organizational Analysis · doi:10.1108/ijoa-04-2020-2120 · Cited by 506
Redesigning Supply Chains using Blockchain-Enabled Circular Economy and COVID-19 Experiences
Nandi, S., Sarkis, J., Hervani, A. A., & Helms, M. M. (2021) · Sustainable Production and Consumption · doi:10.1016/j.spc.2020.10.019 · Cited by 494
Metadata
- Authors
- Morseletto, P.
- Venue
- Resources, Conservation and Recycling
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 153
- Pages
- 104553
- ISSN
- 0921-3449 (ISSN-L)
- OpenAlex
- W2988590694
- Cited by
- 1,414
- References
- 101
- FWCI
- 166.90
- Type
- journal article
- Language
- en
- Open access
- hybrid
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- creativecommons.org/licenses/by/4.0/ (vor)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.