The DOI matches its Crossref record; 194 of the 194 references it cites were found in a registry or an index.
A comprehensive review of natural fibers and their composites: An eco-friendly alternative to conventional materials
Open accessAbstract
Breakthroughs in materials science are the driving force behind many of today's industrial advancements in our fast-changing high-tech world. Composite materials have proven valuable in numerous sectors, including automotive, aerospace, aeronautics, naval, and sports, due to their exceptional mechanical properties and lightweight nature. However, environmental concerns have led to a decrease in the use of fossil fuel-derived materials. Additionally, efforts to reduce greenhouse gas emissions and improve fuel efficiency require lightweight materials with a lower carbon footprint, highlighting the importance of natural fiber composites. Natural fiber composites are made from renewable resources, comprising reinforcements made of natural fibers such as jute, flax, ramie, hemp, cotton, sisal, and kenaf, and a matrix, preferably derived from biomass, which may or may not be biodegradable. However, plant fibers have certain drawbacks when combined with polymers. Due to the presence of hydroxyl groups in lignocellulose, plant fibers are hydrophilic, making them incompatible with hydrophobic thermoplastics and prone to moisture damage. These limitations pose challenges for using plant fibers as polymer reinforcement. To improve adhesion between fibers and the polymer matrix and reduce moisture absorption, surface modifications are typically required. Various methods, such as alkaline, silane, or other chemical treatments, have been developed to enhance fiber-matrix compatibility and improve composite quality. Although natural fiber composites are still in development and their applications are limited, they hold great promise as a sustainable alternative to conventional materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Electrospinning of Nanofibers: Reinventing the Wheel?
Li, D., & Xia, Y. (2004) · Advanced Materials · doi:10.1002/adma.200400719 · Cited by 5,521
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,921
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
Natural fiber polymer composites: A review
Saheb, D. N., & Jog, J. P. (1999) · Advances in Polymer Technology · doi:10.1002/(sici)1098-2329(199924)18:4<351::aid-adv6>3.0.co;2-x · Cited by 2,429
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Silane coupling agents used for natural fiber/polymer composites: A review
Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.005 · Cited by 2,244
Kirk‐Othmer Encyclopedia of Chemical Technology
(2000) · Wiley eBooks · doi:10.1002/0471238961 · Cited by 2,180
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657
DHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
Jawaid, M., & Abdul Khalil, H. P. S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.043 · Cited by 1,567
Natural-fiber-reinforced polymer composites in automotive applications
Holbery, J., & Houston, D. (2006) · JOM · doi:10.1007/s11837-006-0234-2 · Cited by 1,565
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Atmospheric pressure plasmas: A review
Tendero, C., Tixier, C., Tristant, P., Desmaison, J., & Leprince, P. (2006) · Spectrochimica Acta Part B: Atomic Spectroscopy · doi:10.1016/j.sab.2005.10.003 · Cited by 1,553
A review on the degradability of polymeric composites based on natural fibres
Azwa, Z. N., Yousif, B. F., Manalo, A. C., & Karunasena, W. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.11.025 · Cited by 1,530
Kalia, S., Kaith, B. S., & Kaur, I. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21328 · Cited by 1,447
Lignin Depolymerization and Conversion: A Review of Thermochemical Methods
Pandey, M. P., & Kim, C. S. (2011) · Chemical Engineering & Technology · doi:10.1002/ceat.201000270 · Cited by 1,419
Malafaya, P. B., Silva, G. A., & Reis, R. L. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.012 · Cited by 1,401
Gurunathan, T., Mohanty, S., & Nayak, S. K. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.06.007 · Cited by 1,362
Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
John, M. J., & Anandjiwala, R. D. (2008) · Polymer Composites · doi:10.1002/pc.20461 · Cited by 1,291
Kenaf fiber reinforced composites: A review
Akil, H. M., Omar, M. F., Mazuki, A. A. M., Safiee, S., Ishak, Z. A. M., & Abu Bakar, A. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.04.008 · Cited by 1,274
Sisal fibre and its composites: a review of recent developments
Li, Y., Mai, Y.-W., & Ye, L. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00101-9 · Cited by 1,212
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Rong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047
Wood–plastic composites as promising green-composites for automotive industries!
Ashori, A. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.09.043 · Cited by 1,001
Biofibers from agricultural byproducts for industrial applications
Reddy, N., & Yang, Y. (2005) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.11.002 · Cited by 977
Natural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A., Misra, M., Drzal, L., Selke, S., Harte, B., & Hinrichsen, G. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch1 · Cited by 976
Biopolymers: overview of several properties and consequences on their applications
Van de Velde, K., & Kiekens, P. (2002) · Polymer Testing · doi:10.1016/s0142-9418(01)00107-6 · Cited by 887
Biodegradable Multiphase Systems Based on Plasticized Starch: A Review
Avérous, L. (2004) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1081/mc-200029326 · Cited by 834
Valadez-Gonzalez, A., Cervantes-Uc, J. M., Olayo, R., & Herrera-Franco, P. J. (1999) · Composites Part B: Engineering · doi:10.1016/s1359-8368(98)00054-7 · Cited by 829
Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent
Lee, S.-H., & Wang, S. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.04.015 · Cited by 822
Recent Development in Natural Fiber Reinforced Polypropylene Composites
Malkapuram, R., Kumar, V., & Negi, Y. S. (2009) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684407087759 · Cited by 813
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
Natural fibre-reinforced composites for bioengineering and environmental engineering applications
Cheung, H.-Y., Ho, M.-P., Lau, K.-T., Cardona, F., & Hui, D. (2009) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2009.04.014 · Cited by 769
Plant fibre based bio-composites: Sustainable and renewable green materials
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.094 · Cited by 764
Natural Fibre Composites and Their Applications: A Review
Peças, P., Carvalho, H., Salman, H., & Leite, M. (2018) · Journal of Composites Science · doi:10.3390/jcs2040066 · Cited by 750
Joseph, K., Thomas, S., & Pavithran, C. (1996) · Polymer · doi:10.1016/0032-3861(96)00144-9 · Cited by 742
Mechanical properties of kenaf fibers and kenaf/PLA composites
Ochi, S. (2008) · Mechanics of Materials · doi:10.1016/j.mechmat.2007.10.006 · Cited by 708
Influence of various chemical treatments on the composition and structure of hemp fibres
Troëdec, M. L., Sedan, D., Peyratout, C. S., Bonnet, J. P., Smith, A., Guinebretière, R., Gloaguen, V., & Krausz, P. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.12.001 · Cited by 700
Potential of biobased materials for food packaging
Petersen, K., Væggemose Nielsen, P., Bertelsen, G., Lawther, M., Olsen, M. B., Nilsson, N. H., & Mortensen, G. (1999) · Trends in Food Science & Technology · doi:10.1016/s0924-2244(99)00019-9 · Cited by 696
Pillay, V., Dott, C., Choonara, Y. E., Tyagi, C., Tomar, L., Kumar, P., du Toit, L. C., & Ndesendo, V. M. K. (2013) · Journal of Nanomaterials · doi:10.1155/2013/789289 · Cited by 689
Klyosov, A. A. (2007) · doi:10.1002/9780470165935 · Cited by 673
Ahmad, F., Choi, H. S., & Park, M. K. (2015) · Macromolecular Materials and Engineering · doi:10.1002/mame.201400089 · Cited by 672
Self-citationPlasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Fujimaki, T. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00220-6 · Cited by 664
Ecodesign of automotive components making use of natural jute fiber composites
Alves, C., Ferrão, P. M. C., Silva, A. J., Reis, L. G., Freitas, M., Rodrigues, L. B., & Alves, D. E. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.10.022 · Cited by 644
Cellulose Fibers: Bio- and Nano-Polymer Composites: Green Chemistry and Technology
(2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7 · Cited by 626
Shalwan, A., & Yousif, B. F. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.07.014 · Cited by 607
Composition, structure and thermal degradation of hemp cellulose after chemical treatments
Ouajai, S., & Shanks, R. A. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.01.016 · Cited by 601
Supplementary cementitious materials origin from agricultural wastes – A review
Aprianti, E., Shafigh, P., Bahri, S., & Farahani, J. N. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.10.010 · Cited by 596
Influence of processing and chemical treatment of flax fibres on their composites
de Weyenberg, I. V., Ivens, J., Coster, A. D., Kino, B., Baetens, E., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00093-9 · Cited by 586
Preparation and characterization of biodegradable PLA polymeric blends
Chen, C.-C., Chueh, J.-Y., Tseng, H., Huang, H.-M., & Lee, S.-Y. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00466-0 · Cited by 583
Applications of Natural Fibers and Its Composites: An Overview
Sanjay, M. R., Arpitha, G. R., Naik, L. L., Gopalakrishna, K., & Yogesha, B. (2016) · Natural Resources · doi:10.4236/nr.2016.73011 · Cited by 550
Oil palm fiber (OPF) and its composites: A review
Shinoj, S., Visvanathan, R., Panigrahi, S., & Kochubabu, M. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.09.009 · Cited by 523
Effect of alkali treated jute fibres on composite properties
Ray, D., Sarkar, B. K., Rana, A. K., & Bose, N. R. (2001) · Bulletin of Materials Science · doi:10.1007/bf02710089 · Cited by 522
Oil palm biomass as a sustainable energy source: A Malaysian case study
Shuit, S. H., Tan, K. T., Lee, K. T., & Kamaruddin, A. H. (2009) · Energy · doi:10.1016/j.energy.2009.05.008 · Cited by 503
Oil palm fibers: Morphology, chemical composition, surface modification, and mechanical properties
Sreekala, M. S., Kumaran, M. G., & Thomas, S. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971031)66:5<821::aid-app2>3.0.co;2-x · Cited by 492
HUDA, M., DRZAL, L., MOHANTY, A., & MISRA, M. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.10.015 · Cited by 489
Natural Fiber Reinforced Composites
Fuqua, M. A., Huo, S., & Ulven, C. A. (2012) · Polymer Reviews · doi:10.1080/15583724.2012.705409 · Cited by 488
Properties and performance of natural-fibre composites
Pickering, K. L. (2008) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845694593 · Cited by 484
The effects of acetylation on properties of flax fibre and its polypropylene composites
Bledzki, A. K., Mamun, A. A., Lucka-Gabor, M., & Gutowski, V. S. (2008) · Express Polymer Letters · doi:10.3144/expresspolymlett.2008.50 · Cited by 476
Recent Advances in the Application of Natural Fiber Based Composites
Pandey, J. K., Ahn, S. H., Lee, C. S., Mohanty, A. K., & Misra, M. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000095 · Cited by 436
Review of the applications of biocomposites in the automotive industry
Akampumuza, O., Wambua, P. M., Ahmed, A., Li, W., & Qin, X. (2017) · Polymer Composites · doi:10.1002/pc.23847 · Cited by 420
Bledzki, A. K., & Jaszkiewicz, A. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.06.005 · Cited by 415
Mechanical properties evaluation of sisal fibre reinforced polymer composites: A review
Senthilkumar, K., Saba, N., Rajini, N., Chandrasekar, M., Jawaid, M., Siengchin, S., & Alotman, O. Y. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.143 · Cited by 415
Biagiotti, J., Puglia, D., & Kenny, J. M. (2004) · Journal of Natural Fibers · doi:10.1300/j395v01n02_04 · Cited by 412
A Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications
Nurazzi, N. M., Asyraf, M. R. M., Khalina, A., Abdullah, N., Aisyah, H. A., Rafiqah, S. A., Sabaruddin, F. A., Kamarudin, S. H., Norrrahim, M. N. F., Ilyas, R. A., et al. (2021) · Polymers · doi:10.3390/polym13040646 · Cited by 398
Wood Quality and its Biological Basis
Barnett, J., & Jeronimidis, G. (2003) · Cited by 392
Haque, M. M., Hasan, M., Islam, M. S., & Ali, M. E. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.04.072 · Cited by 390
Natural Fibers, Plastics and Composites
(2004) · Springer eBooks · doi:10.1007/978-1-4419-9050-1 · Cited by 364
Beckermann, G. W., & Pickering, K. L. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.03.010 · Cited by 353
PLA Based Biopolymer Reinforced with Natural Fibre: A Review
Mukherjee, T., & Kao, N. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0320-6 · Cited by 348
Lu, T., Jiang, M., Jiang, Z., Hui, D., Wang, Z., & Zhou, Z. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.02.031 · Cited by 342
Chauhan, V., Kärki, T., & Varis, J. (2022) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705719889095 · Cited by 339
Recent advances in biodegradable polymers – Properties, applications and future prospects
Mukherjee, C., Varghese, D., Krishna, J. S., Boominathan, T., Rakeshkumar, R., Dineshkumar, S., Brahmananda Rao, C. V. S., & Sivaramakrishna, A. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112068 · Cited by 321
Ramakrishna, G., & Sundararajan, T. (2004) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.09.008 · Cited by 317
Lu, Y., Weng, L., & Cao, X. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.08.027 · Cited by 312
A study of the potential of acetylation to improve the properties of plant fibres
Hill, C. A. S., Khalil, H. P. S. A., & Hale, M. D. C. (1998) · Industrial Crops and Products · doi:10.1016/s0926-6690(97)10012-7 · Cited by 293
Agrawal, R., Saxena, N. S., Sharma, K. B., Thomas, S., & Sreekala, M. S. (2000) · Materials Science and Engineering A · doi:10.1016/s0921-5093(99)00556-0 · Cited by 285
Evaluation of mechanical and thermal properties of banana–flax based natural fibre composite
Srinivasan, V., Boopathy, S. R., N, S. D., & Ramnath, B. V. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.03.014 · Cited by 280
Lu, T., Liu, S., Jiang, M., Xu, X., Wang, Y., Wang, Z., Gou, J., Hui, D., & Zhou, Z. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2014.02.030 · Cited by 276
Melt rheology of polylactide/poly(butylene adipate-co-terephthalate) blends
Gu, S.-Y., Zhang, K., Ren, J., & Zhan, H. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.01.017 · Cited by 269
Thermoplastic polymers reinforced with fibrous agricultural residues
Georgopoulos, S. T., Tarantili, P. A., Avgerinos, E., Andreopoulos, A. G., & Koukios, E. G. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.02.020 · Cited by 263
Applications of biocomposite materials based on natural fibers from renewable resources: a review
Bharath, K. N., & Basavarajappa, S. (2015) · Science and Engineering of Composite Materials · doi:10.1515/secm-2014-0088 · Cited by 254
Morphology and mechanical properties of unidirectional sisal– epoxy composites
Oksman, K., Wallström, L., Berglund, L. A., & Filho, R. D. T. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10475 · Cited by 251
Hoareau, W., Trindade, W. G., Siegmund, B., Castellan, A., & Frollini, E. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.07.005 · Cited by 250
Barreto, A. C. H., Rosa, D. D. S., Fechine, P. B. A., & Mazzetto, S. E. (2011) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.01.008 · Cited by 243
High Quality Flax Fibre Composites Manufactured by the Resin Transfer Moulding Process
Oksman, K. (2001) · Journal of Reinforced Plastics and Composites · doi:10.1177/073168401772678634 · Cited by 241
Freier, T., Kunze, C., Nischan, C., Kramer, S., Sternberg, K., Saß, M., Hopt, U. T., & Schmitz, K.-P. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00405-7 · Cited by 241
Agarwal, J., Sahoo, S., Mohanty, S., & Nayak, S. K. (2020) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705718815530 · Cited by 239
Sassoni, E., Manzi, S., Motori, A., Montecchi, M., & Canti, M. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.03.033 · Cited by 235
Interface Modification and Mechanical Properties of Natural Fiber-Polyolefin Composite Products
Sain, M., Suhara, P., Law, S., & Bouilloux, A. (2005) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684405041717 · Cited by 227
Mechanical properties of natural fibre reinforced polymer composites
Singha, A. S., & Thakur, V. K. (2008) · Bulletin of Materials Science · doi:10.1007/s12034-008-0126-x · Cited by 211
Structural Characteristics and Thermal Properties of Native Cellulose
Poletto, M., Pistor, V., & J., A. (2013) · Cellulose - Fundamental Aspects · doi:10.5772/50452 · Cited by 210
Arrakhiz, F. Z., Achaby, M. E., Kakou, A. C., Vaudreuil, S., Benmoussa, K., Bouhfid, R., Fassi‐Fehri, O., & Qaiss, A. E. K. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.01.020 · Cited by 209
Thermal stability of blends of polyolefins and sisal fiber
Albano, C., González, J., Ichazo, M. N., & Kaiser, D. (1999) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00064-6 · Cited by 207
Green Composites Made of Bamboo Fabric and Poly (Lactic) Acid for Packaging Applications—A Review
Nurul Fazita, M. R., Jayaraman, K., Bhattacharyya, D., Mohamad Haafiz, M. K., Saurabh, C., Hussin, M., & H.P.S., A. (2016) · Materials · doi:10.3390/ma9060435 · Cited by 206
Amiandamhen, S. O., Meincken, M., & Tyhoda, L. (2020) · Fibers and Polymers · doi:10.1007/s12221-020-9362-5 · Cited by 206
Effect of jute and kapok fibers on properties of thermoplastic cassava starch composites
Prachayawarakorn, J., Chaiwatyothin, S., Mueangta, S., & Hanchana, A. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.12.012 · Cited by 196
Dai, D., & Fan, M. (2014) · Elsevier eBooks · doi:10.1533/9780857099228.1.3 · Cited by 191
Martin, N., Mouret, N., Davies, P., & Baley, C. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.06.012 · Cited by 191
Mechanical Properties of Natural Fibre Mat Reinforced Thermoplastic
Oksman, K. (2000) · Applied Composite Materials · doi:10.1023/a:1026546426764 · Cited by 182
Date palm fibers as polymeric matrix reinforcement: Fiber characterization
Al-Khanbashi, A., Al‐Kaabi, K., & Hammami, A. (2005) · Polymer Composites · doi:10.1002/pc.20118 · Cited by 182
Li, X., Tabil, L. G., Oguocha, I. N. A., et al. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.02.016 · Cited by 168
Zainuddin, S. Y. Z., Ahmad, I., Kargarzadeh, H., Abdullah, I., & Dufresne, A. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.11.106 · Cited by 165
Wu, C.-S. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.04.002 · Cited by 165
Biocomposites from abaca strands and polypropylene. Part I: Evaluation of the tensile properties
Vilaseca, F., Valadez-González, A., Herrera-Franco, P. J., Pèlach, M. À., López, J. P., & Mutjé, P. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.07.066 · Cited by 165
Graupner, N., & Müssig, J. (2011) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.09.007 · Cited by 162
Thiruchitrambalam, M., Athijayamani, A., Sathiyamurthy, S., & Thaheer, A. S. A. (2010) · Journal of Natural Fibers · doi:10.1080/15440478.2010.529299 · Cited by 159
A Review of Properties of Nanocellulose, Its Synthesis, and Potential in Biomedical Applications
Randhawa, A., Dutta, S. D., Ganguly, K., Patil, T. V., Patel, D. K., & Lim, K. (2022) · Applied Sciences · doi:10.3390/app12147090 · Cited by 159
Avérous, L., & Fringant, C. (2001) · Polymer Engineering & Science · doi:10.1002/pen.10768 · Cited by 158
Bessadok, A., Roudeslı, S., Marais, S., Nadege, F., & Lebrun, L. (2008) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.10.018 · Cited by 157
Lignocellulosic flour‐reinforced poly(hydroxybutyrate‐co‐valerate) composites
Dufresne, A., Dupeyre, D., & Paillet, M. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11546 · Cited by 152
Fernandes, E. M., Mano, J. F., & Reis, R. L. (2013) · Composite Structures · doi:10.1016/j.compstruct.2013.05.012 · Cited by 152
Kakroodi, A. R., Kazemi, Y., & Rodrigue, D. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.03.032 · Cited by 151
Püls, J. (1997) · Macromolecular Symposia · doi:10.1002/masy.19971200119 · Cited by 148
Nagarajan, V., Misra, M., & Mohanty, A. K. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.05.042 · Cited by 143
Effect of Maleated Compatibilizer on Performance of PLA/Wheat Straw‐Based Green Composites
Nyambo, C., Mohanty, A. K., & Misra, M. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000403 · Cited by 141
Pan, P., Zhu, B., Kai, W., Serizawa, S., Iji, M., & Inoue, Y. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26407 · Cited by 141
Structure and properties of new natural cellulose fabrics from Cordia dichotoma
Jayaramudu, J., Maity, A., Sadiku, E. R., Guduri, B. R., Rajulu, A. V., Ramana, C. V. V., & Li, R. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.071 · Cited by 141
Mutjé, P., Vallejos, M. E., Gironès, J., Vilaseca, F., López, A. F., López, J. P., & Mendez, J. A. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24315 · Cited by 140
Characterization of Composites Based on Natural and Glass Fibers Obtained by Vacuum Infusion
Rodríguez, E. S., Petrucci, R., Puglia, D., Kenny, J. M., & Vázquez, A. (2005) · Journal of Composite Materials · doi:10.1177/0021998305046450 · Cited by 140
Narendar, R., & Dasan, K. P. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.09.028 · Cited by 138
Natural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A. K., Misra, M., Drzal, L. T., et al. (2005) · doi:10.1201/9780203508206-9 · Cited by 138
Strength improvement in injection-molded jute-fiber-reinforced polylactide green-composites
Arao, Y., Fujiura, T., Itani, S., & Tanaka, T. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.08.032 · Cited by 137
Chen, D., Li, J., & Ren, J. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.04.007 · Cited by 134
Commingled natural fibre/polypropylene wrap spun yarns for structured thermoplastic composites
Zhang, L., & Miao, M. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.09.016 · Cited by 133
Bourmaud, A., & Pimbert, S. (2008) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.05.023 · Cited by 132
Recent developments in chemical degradation of lignin: catalytic oxidation and ionic liquids
Dai, J., Patti, A. F., & Saito, K. (2016) · Tetrahedron Letters · doi:10.1016/j.tetlet.2016.09.084 · Cited by 132
Reinforced polypropylene composites: Effects of chemical compositions and particle size
Ashori, A., & Nourbakhsh, A. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.11.022 · Cited by 131
Dubrovski, P. D. (2010) · Sciyo eBooks · doi:10.5772/295 · Cited by 130
Natural Fibre-Reinforced Polymer Composites and Nanocomposites for Automotive Applications
Njuguna, J., Wambua, P. M., Pielichowski, K., & Kayvantash, K. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_23 · Cited by 126
Thermo-mechanical performance of poly(lactic acid)/flax fibre-reinforced biocomposites
Nassiopoulos, E., & Njuguna, J. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.07.051 · Cited by 124
Studies of acetylation of jute using simplified procedure and its characterization
Rana, A. K., Basak, R. K., Mitra, B. C., Lawther, M., & Banerjee, A. N. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970523)64:8<1517::aid-app9>3.0.co;2-k · Cited by 123
Behazin, E., Misra, M., & Mohanty, A. K. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.03.003 · Cited by 123
High Stiffness Natural Fiber‐Reinforced Hybrid Polypropylene Composites
Li, H., & Sain, M. M. (2003) · Polymer-Plastics Technology and Engineering · doi:10.1081/ppt-120024999 · Cited by 122
Panyasart, K., Chaiyut, N., Amornsakchai, T., & Santawitee, O. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.07.173 · Cited by 122
Reinforcing potential of micro- and nano-sized fibers in the starch-based biocomposites
Soykeabkaew, N., Laosat, N., Ngaokla, A., Yodsuwan, N., & Tunkasiri, T. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.02.015 · Cited by 119
Current advances in the fire retardancy of natural fiber and bio-based composites – A review
Shah, A. U. R., Prabhakar, M. N., & Song, J. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0030-1 · Cited by 119
Nam, G., Lee, D. W., Prasad, C. V., Fujii, T. J., Kim, B.-S., & Song, J. I. (2013) · Advanced Composite Materials · doi:10.1080/09243046.2013.843814 · Cited by 117
AL-Oqla, F. M., Sapuan, S. M., Ishak, M. R., & Nuraini, A. A. (2015) · Computers and Electronics in Agriculture · doi:10.1016/j.compag.2015.01.011 · Cited by 117
Pothan, L. A., George, J., & Thomas, S. (2002) · Composite Interfaces · doi:10.1163/156855402760194692 · Cited by 114
Fiber yield and quality of fiber nettle (Urtica dioica L.) cultivated in Italy
Bacci, L., Baronti, S., Predieri, S., & Virgilio, N. D. (2008) · Industrial Crops and Products · doi:10.1016/j.indcrop.2008.09.005 · Cited by 113
Rahmi, R., Lelifajri, Julinawati, J., & Shabrina (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.04.084 · Cited by 112
Devireddy, S. B. R., & Biswas, S. (2015) · Polymer Composites · doi:10.1002/pc.23706 · Cited by 107
Kapok/cotton fabric–polypropylene composites
Mwaikambo, L. Y., Martuscelli, E., & Avella, M. (2000) · Polymer Testing · doi:10.1016/s0142-9418(99)00061-6 · Cited by 104
Ogunsona, E. O., Misra, M., & Mohanty, A. K. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44221 · Cited by 104
Cyras, V. P., Iannace, S., Kenny, J. M., & Vázquez, A. (2001) · Polymer Composites · doi:10.1002/pc.10522 · Cited by 103
Fractionation and characterization of polysaccharides from abaca fibre
Sun, R., Fang, J., Goodwin, A., Lawther, J. M., & Bolton, A. J. (1998) · Carbohydrate Polymers · doi:10.1016/s0144-8617(98)00046-0 · Cited by 103
Natural fiber for green technology in automotive industry: A brief review
Ramli, N., Mazlan, N., Ando, Y., Leman, Z., Abdan, K., Aziz, A., & Sairy, N. A. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/368/1/012012 · Cited by 98
Tensile Properties of Successive Alkali Treated Short Jute Fiber Reinforced PLA Composites
Rajesh, G., & Prasad, A. V. R. (2014) · Procedia Materials Science · doi:10.1016/j.mspro.2014.07.425 · Cited by 93
Jayavani, S., Deka, H., Varghese, T. O., & NAYAK, S. K. (2015) · Polymer Composites · doi:10.1002/pc.23529 · Cited by 85
Shinoj, S., Visvanathan, R., & Panigrahi, S. (2010) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2010.04.008 · Cited by 85
Microstructure and tensile properties of various varieties of rice husk
Chen, Z., Xu, Y., & Shivkumar, S. (2017) · Journal of the Science of Food and Agriculture · doi:10.1002/jsfa.8556 · Cited by 84
Influence of Fiber Orientation on the Mechanical Properties of Polyester/Jute Composites
Laranjeira, E., de Carvalho, L. H., Silva, S. M. D. L., & d’Almeida, J. R. M. (2006) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684406060577 · Cited by 83
Hong, S.-H., Park, J. H., Kim, O. Y., & Hwang, S. (2021) · Polymers · doi:10.3390/polym13040667 · Cited by 81
Liu, M., Silva, D. A. S., Fernando, D., Meyer, A. S., Madsen, B., Daniel, G., & Thygesen, A. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.06.003 · Cited by 80
Santucci, B. S., Bras, J., Belgacem, M. N., Curvelo, A. A. D. S., & Pimenta, M. T. B. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.07.017 · Cited by 79
Kenaf Fiber Composite in Automotive Industry: An Overview
Hassan, F. E. A. A., Zulkifli, R., Ghazali, M. J., et al. (2017) · International Journal on Advanced Science Engineering and Information Technology · doi:10.18517/ijaseit.7.1.1180 · Cited by 79
Duffy, S., & Verges, M. (2008) · Environment and Behavior · doi:10.1177/0013916508323737 · Cited by 76
Ahmad, E. E. M., & Luyt, A. S. (2011) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.12.011 · Cited by 75
Improvement of Mechanical Properties of Injection-Molded Polylactic Acid–Kenaf Fiber Biocomposite
Anuar, H., Zuraida, A., Kovács, J. G., & Tábi, T. (2011) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711408984 · Cited by 75
Performance evaluation of cellulose nanofiber reinforced polymer composites
Norrrahim, M. N. F., Kasim, N. A. M., Knight, V. F., Halim, N. A., Shah, N. A. A., Noor, S. A. M., Jamal, S. H., Ong, K. K., Yunus, W. M. Z. W., Farid, M. A. A., et al. (2021) · Functional Composites and Structures · doi:10.1088/2631-6331/abeef6 · Cited by 66
Yang, Z. H., Li, K., Zhang, M., Xin, D., & Zhang, J. (2016) · Biotechnology for Biofuels · doi:10.1186/s13068-016-0443-z · Cited by 63
Mishra, S., & Naik, J. (2005) · Polymer-Plastics Technology and Engineering · doi:10.1081/pte-200057814 · Cited by 61
Chunhong, W., Liu, S., & Zhanglong, Y. (2016) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684416637681 · Cited by 60
(2014) · Elsevier eBooks · doi:10.1016/c2013-0-16304-0 · Cited by 58
Natural fibre-reinforced composite parts for automotive applications
Furtado, S. C. R., Araújo, A. L., Silva, A., Alves, C., & Ribeiro, A. M. R. (2014) · International Journal of Automotive Composites · doi:10.1504/ijautoc.2014.064112 · Cited by 56
Boulos, L., Foruzanmehr, M. R., Tagnit‐Hamou, A., Elkoun, S., & Robert, M. (2017) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2017.02.008 · Cited by 55
Bio-processing of bamboo fibres for textile applications: a mini review
Fu, J., Li, X., Gao, W., Wang, H., Cavaco-Paulo, A. M., & Silva, C. (2012) · Biocatalysis and Biotransformation · doi:10.3109/10242422.2012.650450 · Cited by 54
Luo, H., Zhang, C., Xiong, G., & Wan, Y. (2015) · Polymer Composites · doi:10.1002/pc.23549 · Cited by 51
Angelini, L. G., Scalabrelli, M., Tavarini, S., Cinelli, P., Anguillesi, I., & Lazzeri, A. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.05.004 · Cited by 50
Beg, M. D. H. (2007) · Research Commons (University of Waikato) · Cited by 49
Static and Dynamic Mechanical Properties of Cotton/Epoxy Green Composites
Koyuncu, M., Karahan, M., Karahan, N., Shaker, K., & Nawab, Y. (2016) · Fibres and Textiles in Eastern Europe · doi:10.5604/12303666.1201139 · Cited by 48
Foruzanmehr, M. R., Vuillaume, P. Y., Robert, M., & Elkoun, S. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.105 · Cited by 44
Failure mechanisms in composites reinforced with unidirectional Phormium leaf fibre
Newman, R. H., Guen, M.-J. L., Battley, M., & Carpenter, J. E. P. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.11.001 · Cited by 43
Mechraoui, A., Riedl, B., & Rodrigue, D. (2007) · Composite Interfaces · doi:10.1163/156855407782106591 · Cited by 40
Effect of NaOH Treatments on Jute and Coir Fiber PP Composites
Hải, N. M., Kim, B.-S., & Lee, S. I. (2009) · Advanced Composite Materials · doi:10.1163/156855109x428754 · Cited by 40
Pradhan, P., Purohit, A., Mohapatra, S. S., Subudhi, C., Das, M., Singh, N. K., & Sahoo, B. B. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.05.136 · Cited by 40
Green Biocomposites: A Prospective Utilization in Automobile Industry
Verma, D., & Sharma, S. (2017) · Green energy and technology · doi:10.1007/978-3-319-49382-4_8 · Cited by 35
Studies on Electrical Properties of Natural Fiber: HDPE Composites
Naik, J., & Mishra, S. (2005) · Polymer-Plastics Technology and Engineering · doi:10.1081/pte-200057818 · Cited by 34
de Campos, A., Marconcini, J. M., Imam, S. H., Klamczynski, A. K., Ortis, W., Wood, D., Williams, T., Martins-Franchetti, S., & Mattoso, L. H. C. (2012) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684412441092 · Cited by 34
Doğan, Ş. D., Tayfun, Ü., & Doğan, M. (2015) · Journal of Composite Materials · doi:10.1177/0021998315604706 · Cited by 32
Nonisothermal crystallization kinetics of modified bamboo fiber/PCL composites
Huang, Y., Liu, H., He, P., Yuan, L., Xiong, H., Xu, Y., & Yu, Y. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.31772 · Cited by 31
Applications of Lightweight Composites in Automotive Industries
Zhao, D. X., & Zhou, Z. (2014) · ACS symposium series · doi:10.1021/bk-2014-1175.ch009 · Cited by 29
Ninomiya, K., Abe, M., Tsukegi, T., Kuroda, K., Omichi, M., Takada, K., Noguchi, M., Tsuge, Y., Ogino, C., Taki, K., et al. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.08.019 · Cited by 26
Boustani, M. E., Lebrun, G., Brouillette, F., & Belfkira, A. (2017) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.22777 · Cited by 25
How Sustainable Are Biopolymers and Biobased Products? The Hope, the Doubts, and the Reality
Patel, M. K., & Narayan, R. (2005) · CRC Press eBooks · doi:10.1201/9780203508206.ch27 · Cited by 23
Materials and the Development of Civilization and Science
Smith, C. S. (1965) · Science · doi:10.1126/science.148.3672.908 · Cited by 20
Review of forests, wood products and wood biotechnology of Iran and Germany - Part III
Kharazipour, A., Schöpper, C., Müller, C., & Euring, M. (2009) · GRO · doi:10.17875/gup2009-272 · Cited by 14
Cited by
Development of a Low-Cost Banana Fiber Extractor
Ukwu, N. O., Onyenanu, I. U., & Owuama, K. C. (2024) · International Journal of Innovative Science and Research Technology (IJISRT) · doi:10.38124/ijisrt/ijisrt24apr2282 · Cited by 388
Mahboob, A., Hassanshahi, O., Safi, M., & Majid, T. A. (2024) · Advanced Composite Materials · doi:10.1080/09243046.2024.2322799 · Cited by 28
Metadata
- Authors
- Elfaleh, I., Abbassi, F., Habibi, M., Ahmad, F., Guedri, M., Nasri, M., & Garnier, C.
- Venue
- Results in Engineering
- Publisher
- Elsevier BV
- Published
- 2023-09
- Volume
- 19
- Pages
- 101271
- ISSN
- 2590-1230 (ISSN-L)
- OpenAlex
- W4382794017
- Cited by
- 1,034
- References
- 194
- FWCI
- 76.99
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.