The DOI matches its Crossref record; 165 of the 165 references it cites were found in a registry or an index.
A comprehensive review on thermal management systems for power lithium-ion batteries
Abstract
Abstract Lithium-ion batteries are extensively utilized in electric vehicles for its high energy density. However, safety problems caused by thermal runaway and performance degradation caused by abnormal temperature must be solved. Electric vehicles must adapt to hot and cold environments, which requires the battery pack to keep good performance at both low and high temperatures. A lot of investigations were reported in the last decade on the thermal management techniques of power batteries. To clarify the problems to be solved in the future, the research progress of battery cooling system and preheating system are thoroughly summarized and classified depending on the heat transfer media. Various thermal management technologies are evaluated from multiple perspectives, including production and maintenance costs, system simplification, heating or cooling efficiency, internal temperature gradients, safety, and adaptability. It will be a research trend to design a novel thermal management system incorporating multiple technologies by utilizing the advantages of various cooling and heating methods.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
Thermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
A review of lithium ion battery failure mechanisms and fire prevention strategies
Wang, Q., Mao, B., Stoliarov, S. I., & Sun, J. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.03.002 · Cited by 1,755
Liu, H., Wei, Z., He, W., & Zhao, J. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.016 · Cited by 1,332
Review on battery thermal management system for electric vehicles
Kim, J., Oh, J., & Lee, H. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.12.020 · Cited by 1,292
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Battery thermal models for hybrid vehicle simulations
Pesaran, A. A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00200-8 · Cited by 1,116
Heat transfer characteristics of thermal energy storage system using PCM capsules: A review
Regin, A. F., Solanki, S. C., & Saini, J. S. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.06.009 · Cited by 945
Lithium-ion battery structure that self-heats at low temperatures
Wang, C.-Y., Zhang, G., Ge, S., Xu, T., Ji, Y., Yang, X.-G., & Leng, Y. (2016) · Nature · doi:10.1038/nature16502 · Cited by 878
Comparison of different cooling methods for lithium ion battery cells
Chen, D., Jiang, J., Kim, G.-H., Yang, C., & Pesaran, A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.015 · Cited by 817
Viscosity and Thermal Conductivity Equations for Nitrogen, Oxygen, Argon, and Air
Lemmon, E. W., & Jacobsen, R. T. (2004) · International Journal of Thermophysics · doi:10.1023/b:ijot.0000022327.04529.f3 · Cited by 776
Lithium plating in a commercial lithium-ion battery – A low-temperature aging study
Petzl, M., Kasper, M., & Danzer, M. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.065 · Cited by 731
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Sabbah, R., Kizilel, R., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.03.082 · Cited by 680
A lumped-parameter electro-thermal model for cylindrical batteries
Lin, X., Perez, H. E., Mohan, S., Siegel, J. B., Stefanopoulou, A. G., Ding, Y., & Castanier, M. P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.097 · Cited by 677
Li-Ion Cell Operation at Low Temperatures
Ji, Y., Zhang, Y., & Wang, C.-Y. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.047304jes · Cited by 640
Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling
Qian, Z., Li, Y., & Rao, Z. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.08.063 · Cited by 626
Design optimization of electric vehicle battery cooling plates for thermal performance
Jarrett, A., & Kim, I. Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.090 · Cited by 560
Graphene-enhanced hybrid phase change materials for thermal management of Li-ion batteries
Goli, P., Legedza, S., Dhar, A., Salgado, R., Renteria, J., & Balandin, A. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.135 · Cited by 547
Rao, Z., Qian, Z., Kuang, Y., & Li, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.06.059 · Cited by 535
Fan, L., Khodadadi, J. M., & Pesaran, A. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.050 · Cited by 534
An alternative cooling system to enhance the safety of Li-ion battery packs
Kizilel, R., Sabbah, R., Selman, J. R., & Al-Hallaj, S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.074 · Cited by 513
Tauseef-ur-Rehman, Ali, H. M., Janjua, M. M., Sajjad, U., & Yan, W.-M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.001 · Cited by 507
An electrochemical-thermal coupled overcharge-to-thermal-runaway model for lithium ion battery
Ren, D., Feng, X., Lu, L., Ouyang, M., Zheng, S., Li, J., & He, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.08.035 · Cited by 506
A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles
Park, H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.102 · Cited by 497
Heating strategies for Li-ion batteries operated from subzero temperatures
Ji, Y., & Wang, C. Y. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.03.147 · Cited by 485
Zhao, J., Rao, Z., & Li, Y. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.06.056 · Cited by 481
Wilke, S., Schweitzer, B., Khateeb, S., & Al-Hallaj, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.11.018 · Cited by 475
Yang, N., Zhang, X., Li, G., & Hua, D. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.049 · Cited by 467
Chen, K., Wu, W., Fang, Y., Chen, L., & Wang, S. (2018) · Energy · doi:10.1016/j.energy.2018.11.011 · Cited by 460
Wu, W., Yang, X., Zhang, G., Chen, K., & Wang, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.02.022 · Cited by 455
Zhang, Z., Zhang, N., Peng, J., Fang, X., Gao, X., & Fang, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.10.014 · Cited by 454
Phase-change materials (PCM) for automotive applications: a review
Jaguemont, J., Omar, N., Van den Bossche, P., & Mierlo, J. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.097 · Cited by 451
Fan, Y., Bao, Y., Ling, C., Chu, Y., Tan, X., & Yang, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.03.157 · Cited by 441
Wang, Z., Zhang, Z., Jia, L., & Yang, L. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.009 · Cited by 425
Karimi, G., & Li, X. (2013) · International Journal of Energy Research · doi:10.1002/er.1956 · Cited by 411
The Limits of Low-Temperature Performance of Li-Ion Cells
Huang, C. K., Sakamoto, J. S., Wolfenstine, J., & Surampudi, S. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393622 · Cited by 401
Ultra-thin minichannel LCP for EV battery thermal management
Jin, L. W., Lee, P. S., Kong, X. X., Fan, Y., & Chou, S. K. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.07.013 · Cited by 393
Overcharge behaviors and failure mechanism of lithium-ion batteries under different test conditions
Ren, D., Feng, X., Lu, L., He, X., & Ouyang, M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.05.015 · Cited by 387
Liang, J., Gan, Y., & Li, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.10.063 · Cited by 367
Ping, P., Peng, R., Kong, D., Chen, G., & Wen, J. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.09.025 · Cited by 366
2011 IEEE Vehicle Power and Propulsion Conference
(2011) · doi:10.1109/vppc16782.2011 · Cited by 349
Runaway risk of forming toxic compounds
Hammami, A., Raymond, N., & Armand, M. (2003) · Nature · doi:10.1038/424635b · Cited by 346
Zhao, R., Zhang, S., Liu, J., & Gu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.001 · Cited by 343
Jiang, G., Huang, J., Fu, Y., Cao, M., & Liu, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.197 · Cited by 335
Experimental investigation on EV battery cooling and heating by heat pipes
Wang, Q., Jiang, B., Xue, Q. F., Sun, H. L., Li, B., Zou, H. M., & Yan, Y. Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.09.083 · Cited by 329
Siddique, A. R. M., Mahmud, S., & Heyst, B. V. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.094 · Cited by 310
Kizilel, R., Lateef, A., Sabbah, R., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.04.050 · Cited by 301
Hussain, A., Abidi, I. H., Tso, C. Y., Chan, K. C., Luo, Z., & Chao, C. Y. H. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.09.019 · Cited by 293
Chung, Y., & Kim, M. S. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.05.083 · Cited by 291
Thermal management of Li-ion battery with liquid metal
Yang, X.-H., Tan, S.-C., & Liu, J. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.03.054 · Cited by 285
Thermal analysis and two-directional air flow thermal management for lithium-ion battery pack
Yu, K., Yang, X., Cheng, Y., & Li, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.086 · Cited by 282
Lv, Y., Yang, X., Li, X., Zhang, G., Wang, Z., & Yang, C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.058 · Cited by 282
Heat transfer enhancement of phase change composite material: Copper foam/paraffin
Wang, C., Lin, T., Li, N., & Zheng, H. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.04.039 · Cited by 278
Zhang, J., Ge, H., Li, Z., & Ding, Z. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.181 · Cited by 273
Panchal, S., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.11.019 · Cited by 271
Structural optimization of lithium-ion battery pack with forced air cooling system
Xie, J., Ge, Z., Zang, M., & Wang, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.143 · Cited by 271
Zhao, J., Lv, P., & Rao, Z. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.11.017 · Cited by 270
Experimental and numerical study on melting of phase change materials in metal foams at pore scale
Chen, Z., Gao, D., & Shi, J. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.01.003 · Cited by 269
Study on thermal management of rectangular Li-ion battery with serpentine-channel cold plate
Deng, T., Zhang, G., & Ran, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.065 · Cited by 269
Battery thermal management by boiling heat-transfer
van Gils, R. W., Danilov, D., Notten, P. H. L., Speetjens, M. F. M., & Nijmeijer, H. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.12.006 · Cited by 266
A review of the applications of heat pipe heat exchangers for heat recovery
Srimuang, W., & Amatachaya, P. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.03.030 · Cited by 266
Wu, W., Yang, X., Zhang, G., Ke, X., Wang, Z., Situ, W., Li, X., & Zhang, J. (2016) · Energy · doi:10.1016/j.energy.2016.07.119 · Cited by 266
Lin, C., Xu, S., Chang, G., & Liu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.068 · Cited by 263
Chen, K., Song, M., Wei, W., & Wang, S. (2017) · Energy · doi:10.1016/j.energy.2017.12.110 · Cited by 263
Wang, T., Tseng, K. J., & Zhao, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.033 · Cited by 259
Fathabadi, H. (2014) · Energy · doi:10.1016/j.energy.2014.04.046 · Cited by 258
Alipanah, M., & Li, X. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.07.010 · Cited by 257
Development of cooling strategy for an air cooled lithium-ion battery pack
Sun, H., & Dixon, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.107 · Cited by 249
Azizi, Y., & Sadrameli, S. M. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.09.081 · Cited by 246
Park, S., & Jung, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.039 · Cited by 243
Low-temperature performance of Li-ion batteries: The behavior of lithiated graphite
Senyshyn, A., Mühlbauer, M. J., Dolotko, O., & Ehrenberg, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.008 · Cited by 241
Research on the heat dissipation performance of battery pack based on forced air cooling
Xu, X. M., & He, R. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.004 · Cited by 237
Modeling thermal management of lithium-ion PNGV batteries
Nelson, P., Dees, D., Amine, K., & Henriksen, G. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00197-0 · Cited by 234
Hussain, A., Tso, C. Y., & Chao, C. Y. H. (2016) · Energy · doi:10.1016/j.energy.2016.09.008 · Cited by 227
Hong, S., Zhang, X., Chen, K., & Wang, S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.09.092 · Cited by 223
Thermal management optimization of a prismatic battery with shape-stabilized phase change material
Wu, W., Wu, W., & Wang, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.01.062 · Cited by 222
Malik, M., Dinçer, İ., Rosen, M. A., Mathew, M., & Fowler, M. W. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.029 · Cited by 221
Design of the cell spacings of battery pack in parallel air-cooled battery thermal management system
Chen, K., Chen, Y., Li, Z., Yuan, F., & Wang, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.06.131 · Cited by 220
Wang, Z., Yang, H., Li, Y., Wang, G., & Wang, J. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.06.007 · Cited by 220
Lu, Z., Yu, X., Wei, L., Qiu, Y., Zhang, L., Meng, X., & Jin, L. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.02.080 · Cited by 217
Minimization of thermal non-uniformity in lithium-ion battery pack cooled by channeled liquid flow
Zhao, C., Sousa, A. C. M., & Jiang, F. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.10.017 · Cited by 214
Wang, Q., Rao, Z., Huo, Y., & Wang, S. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.11.005 · Cited by 213
Optimization of the internal fin in a phase-change-material module for battery thermal management
Weng, J., Ouyang, D., Yang, X., Chen, M., Zhang, G., & Wang, J. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114698 · Cited by 211
Zou, D., Liu, X., He, R., Zhu, S., Bao, J., Guo, J., Hu, Z., & Wang, B. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.11.064 · Cited by 204
Ling, Z., Wen, X., Zhang, Z., Fang, X., & Gao, X. (2018) · Energy · doi:10.1016/j.energy.2017.12.098 · Cited by 202
Structure optimization of parallel air-cooled battery thermal management system
Chen, K., Wang, S., Song, M., & Chen, L. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.04.026 · Cited by 201
Lazrak, A., Fourmigué, J.-F., & Robin, J.-F. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.08.172 · Cited by 200
A surrogate thermal modeling and parametric optimization of battery pack with air cooling for EVs
Li, W., Xiao, M., Peng, X., Garg, A., & Gao, L. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.060 · Cited by 198
Rapid self-heating and internal temperature sensing of lithium-ion batteries at low temperatures
Zhang, G., Ge, S., Xu, T., Yang, X.-G., Tian, H., & Wang, C.-Y. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.09.117 · Cited by 196
Liu, F., Lan, F., & Chen, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.108 · Cited by 195
Feng, X., He, X., Ouyang, M., Wang, L., Lu, L., Ren, D., & Santhanagopalan, S. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0311816jes · Cited by 194
Sensorless Battery Internal Temperature Estimation Using a Kalman Filter With Impedance Measurement
Richardson, R. R., & Howey, D. A. (2015) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2015.2420375 · Cited by 191
Liu, H., Eze, C. M., & Zhao, J. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.07.037 · Cited by 189
A comprehensive experimental study on temperature-dependent performance of lithium-ion battery
Lu, Z., Yu, X. L., Wei, L. C., Cao, F., Zhang, L. Y., Meng, X. Z., & Jin, L. W. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113800 · Cited by 189
He, J., Yang, X., & Zhang, G. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.11.100 · Cited by 188
Feng, X., Xu, C., He, X., Wang, L., Zhang, G., & Ouyang, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.003 · Cited by 185
Chen, K., Wang, S., Song, M., & Chen, L. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.060 · Cited by 182
Feng, L., Zhou, S., Li, Y., Wang, Y., Zhao, Q., Luo, C., Wang, G., & Yan, K. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.01.001 · Cited by 182
Ruan, H., Jiang, J., Sun, B., Zhang, W., Gao, W., Wang, L. Y., & Ma, Z. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.151 · Cited by 180
Rao, Z., Huo, Y., Liu, X., & Zhang, G. (2015) · Journal of the Energy Institute · doi:10.1016/j.joei.2014.09.006 · Cited by 179
Comparison analysis on the thermal runaway of lithium-ion battery under two heating modes
Wu, T., Chen, H., Wang, Q., & Sun, J. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.11.022 · Cited by 179
Experimental study on pulse self–heating of lithium–ion battery at low temperature
Qu, Z. G., Jiang, Z. Y., & Wang, Q. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.020 · Cited by 179
Ali, H. M. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100986 · Cited by 174
Two-dimensional electrochemical–thermal coupled modeling of cylindrical LiFePO4 batteries
Xu, M., Zhang, Z., Wang, X., Jia, L., & Yang, L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.070 · Cited by 167
Robinson, J. B., Darr, J. A., Eastwood, D. S., Hinds, G., Lee, P. D., Shearing, P. R., Taiwo, O. O., & Brett, D. J. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.059 · Cited by 164
Zhang, X., Kong, X., Li, G., & Li, J. (2014) · Energy · doi:10.1016/j.energy.2013.10.088 · Cited by 162
Zhu, J., Sun, Z., Wei, X., Dai, H., & Gu, W. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.063 · Cited by 159
Liu, Z., Sun, X., & Ma, C. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.05.012 · Cited by 156
Zhang, X., Liu, C., & Rao, Z. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.076 · Cited by 153
Chen, M., Ouyang, D., Liu, J., & Wang, J. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113750 · Cited by 152
Choi, Y. S., & Kang, D. M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.120 · Cited by 150
Electrochemical–Thermal Model of Pouch-type Lithium-ion Batteries
Ghalkhani, M., Bahiraei, F., Nazri, G., & Saif, M. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.06.164 · Cited by 142
Chen, M., Ouyang, D., Weng, J., Liu, J., & Wang, J. (2019) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2019.08.023 · Cited by 136
Experimental and analytical study on heat generation characteristics of a lithium-ion power battery
Xie, Y., Shang, S., Tang, J., Wu, H., & Yu, J. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.02.038 · Cited by 134
One-dimensional physics-based reduced-order model of lithium-ion dynamics
Lee, J. L., Chemistruck, A., & Plett, G. L. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.075 · Cited by 133
Yi, J., Kim, U. S., Shin, C. B., Han, T., & Park, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.085 · Cited by 131
Thermal Management of Densely-packed EV Battery with Forced Air Cooling Strategies
Zhao, L., Meng, X., Wei, L., Hu, W., Zhang, L. Y., & Jin, L. (2016) · Energy Procedia · doi:10.1016/j.egypro.2016.06.098 · Cited by 131
Computational design and refinement of self-heating lithium ion batteries
Yang, X.-G., Zhang, G.-S., & Wang, C.-Y. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.028 · Cited by 129
Numerical investigation of thermal runaway mitigation through a passive thermal management system
Li, Q., Yang, C., Santhanagopalan, S., Smith, K. A., Lamb, J., Steele, L. A. M., & Torres-Castro, L. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.04.091 · Cited by 127
Yu, X., Zhao, L., Zhang, L., Wei, L., Cui, X. Y., & Jin, L. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118576 · Cited by 127
Thermal Evaluation of Toyota Prius Battery Pack
Zolot, M., Pesaran, A. A., & Mihalic, M. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-01-1962 · Cited by 123
Thermal analysis of high-power lithium-ion battery packs using flow network approach
Karimi, G., & Dehghan, A. R. (2014) · International Journal of Energy Research · doi:10.1002/er.3173 · Cited by 118
Xu, X., Li, W., Xu, B. L., & Qin, J. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.04.180 · Cited by 118
Cooling and Preheating of Batteries in Hybrid Electric Vehicles
Pesaran, A. A., Vlahinos, A. S., & Stuart, T. A. (2003) · Cited by 117
A novel approach for performance improvement of liquid to vapor based battery cooling systems
Al‐Zareer, M., Dinçer, İ., & Rosen, M. A. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.02.063 · Cited by 115
Boiling Liquid Battery Cooling for Electric Vehicle
Hirano, H., Tajima, T., Hasegawa, T., SEKIGUCHI, T., & Uchino, M. (2014) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itec-ap.2014.6940931 · Cited by 111
Huo, Y., & Rao, Z. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.12.009 · Cited by 109
Design of Parallel Air-Cooled Battery Thermal Management System through Numerical Study
Chen, K., Li, Z., Chen, Y., Long, S., Hou, J., Song, M., & Wang, S. (2017) · Energies · doi:10.3390/en10101677 · Cited by 107
A lumped thermal model of lithium-ion battery cells considering radiative heat transfer
Allafi, W., Zhang, C., Uddin, K., Worwood, D., Truong, D. Q., Ascencio, P., Li, K., & Marco, J. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.07.105 · Cited by 107
Wang, C., Zhang, G., Li, X., Huang, J., Wang, Z., Lv, Y., Meng, L., Situ, W., & Rao, M. (2017) · International Journal of Energy Research · doi:10.1002/er.3916 · Cited by 94
Zhong, G., Zhang, G., Yang, X., Li, X., Wang, Z., Yang, C., Yang, C., & Gao, G. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.08.022 · Cited by 93
Lei, Z.-G., Zhang, Y., & Lei, X.-G. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.159 · Cited by 84
A rechargeable lithium-ion battery module for underwater use
Pendergast, D. R., DeMauro, E. P., Fletcher, M., Stimson, E., & Mollendorf, J. C. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.071 · Cited by 80
Innovative heating of large-size automotive Li-ion cells
Yang, X.-G., Liu, T., & Wang, C.-Y. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.102 · Cited by 80
Temperature uniformity of a heated lithium-ion battery cell in cold climate
Lei, Z.-G., Zhang, Y., & Lei, X.-G. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.09.100 · Cited by 77
Teng, H., & Yeow, K. F. (2012) · SAE International journal of alternative powertrains · doi:10.4271/2012-01-2017 · Cited by 76
An Enhanced Online Temperature Estimation for Lithium-Ion Batteries
Xie, Y., Li, W., Hu, X., Lin, X., Zhang, Y., Dan, D., Feng, F., Liu, B., & Li, K. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.2980153 · Cited by 70
A new charging mode of Li-ion batteries with LiFePO4/C composites under low temperature
Zhao, X., Zhang, G.-Y., Yang, L., Qiang, J., & Chen, Z.-Q. (2011) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-010-1038-8 · Cited by 69
Thermal Management with Phase Change Material for a Power Battery under Cold Temperatures
Rao, Z., Wang, S. F., & Zhang, Y. (2014) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2011.576411 · Cited by 67
Pushing the thermal limits of Li-ion batteries
Kohlmeyer, R. R., Horrocks, G. A., Blake, A. J., Yu, Z., Maruyama, B., Huang, H., & Durstock, M. F. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.103927 · Cited by 67
McCleary, D. A. H., Meyers, J. P., & Kim, B. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.023311jes · Cited by 66
Ji, C., Wang, B., Wang, S., Pan, S., Wang, D., Qi, P., & Zhang, K. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.04.093 · Cited by 66
Correlation between capacity loss and measurable parameters of lithium-ion batteries
Li, X., Wang, Q., Yang, Y., & Kang, J. (2019) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2019.03.046 · Cited by 65
The study of electrochemical properties and lithium deposition of graphite at low temperature
Park, G., Gunawardhana, N., Nakamura, H., Lee, Y., & Masaki, Y. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.058 · Cited by 63
An, Z., Jia, L., Wei, L., & Chengliang, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.07.147 · Cited by 60
Numerical study on the effects of battery heating in cold climate
Fan, R., Zhang, C., Wang, Y., Ji, C., Meng, Z., Xu, L., Ou, Y., & Chin, C. S. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100969 · Cited by 59
Experimental study on the effects of pre-heating a battery in a low-temperature environment
Song, H., Jeong, J., Lee, B., Shin, D.-H., Kim, B., Kim, T., & Heo, H. (2012) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2012.6422509 · Cited by 56
Cho, G., Choi, J., Park, J.-H., & Won, S. (2014) · International Journal of Automotive Technology · doi:10.1007/s12239-014-0083-x · Cited by 56
Schweitzer, B., Wilke, S. K., Khateeb, S. A., & Al‐Hallaj, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.04.016 · Cited by 53
Effects of discharge rate on electrochemical and thermal characteristics of LiFePO4/graphite battery
Huang, Y., & Lai, H. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113744 · Cited by 48
A multi scale multi-dimensional thermo electrochemical modelling of high capacity lithium-ion cells
Tourani, A., White, P., & Ivey, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.030 · Cited by 45
Foss, C. E. L., Svensson, A. M., Gullbrekken, Ø., Sunde, S., & Vullum‐Bruer, F. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.04.001 · Cited by 39
Low-temperature electrochemical performances of LiFePO4 cathode materials for lithium ion batteries
Wang, F., Chen, J., Tan, Z., Wu, M., Yi, B., Su, W., Wei, Z., & Liu, S. (2014) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2014.02.013 · Cited by 38
A review of thermal management and safety for lithium ion batteries
Madani, S. S., Swierczynski, M. J., & Kær, S. K. (2017) · International Conference on Ecological Vehicles and Renewable Energies (EVER) · doi:10.1109/ever.2017.7935914 · Cited by 34
Energy consumption of battery cooling in hybrid electric vehicles
Krüger, I., Limperich, D., & Schmitz, G. (2012) · Purdue e-Pubs (Purdue University System) · Cited by 30
Researches on heating low-temperature lithium-ion power battery in electric vehicles
Li, J., Wu, P., & Tian, H. (2014) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itec-ap.2014.6941276 · Cited by 26
Rao, M., Zhang, L., Li, L., Rong, L., Ye, C., Zhou, G., Xu, H. L., & Qiu, Y. (2019) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2019.113544 · Cited by 25
Xie, Y., He, X.-J., Li, W., Zhang, Y., Dan, D., Lee, K., & Liu, J. (2020) · International Journal of Energy Research · doi:10.1002/er.5803 · Cited by 23
Development of a one-dimensional thermal-electrochemical model of lithium ion battery
Wang, T., Tseng, K. J., Yin, S., et al. (2013) · Proceedings of the Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2013.6700243 · Cited by 16
Wu, C.-M., Chang, C., Avdeev, M., Pan, P., & Li, W. (2018) · Physica B Condensed Matter · doi:10.1016/j.physb.2018.02.032 · Cited by 12
Cited by
Overview of batteries and battery management for electric vehicles
Liu, W., Placke, T., & Chau, K. T. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.03.016 · Cited by 715
Khan, F. M. N. U., Rasul, M. G., Sayem, A. S. M., & Mandal, N. K. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108033 · Cited by 507
Sadeghi, G. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.01.017 · Cited by 380
A comprehensive review on heat pipe based battery thermal management systems
Weragoda, D. M., Tian, G., Burkitbayev, A., Lo, K.-H., & Zhang, T. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120070 · Cited by 330
Waseem, M., Ahmad, M., Parveen, A., & Suhaib, M. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233349 · Cited by 288
Metadata
- Authors
- Zichen, W., & Changqing, D.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 139
- Pages
- 110685
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W3119401976
- Cited by
- 294
- References
- 165
- FWCI
- 15.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.