Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
The DOI matches its Crossref record; 148 of the 162 references it cites were found in a registry or an index.
Abstract
Nearing 30 years since its introduction, 3D printing technology is set to revolutionize research and teaching laboratories. This feature encompasses the history of 3D printing, reviews various printing methods, and presents current applications. The authors offer an appraisal of the future direction and impact this technology will have on laboratory settings as 3D printers become more accessible.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Patterning proteins and cells using soft lithography
Kane, R. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00165-9 · Cited by 1,490
Engineering cell shape and function
Singhvi, R., Kumar, A., Lopez, G. P., Stephanopoulos, G. N., Wang, D. I. C., Whitesides, G. M., & Ingber, D. E. (1994) · Science · doi:10.1126/science.8171320 · Cited by 1,453
Research works printed but not linked: 21
- Leukers B., 2005, J. Mater. Sci.: Mater. Med., 16, 1121
- Lipton, J.; Arnold, D.; Nigl, F.; Lopez, N.; Cohen, D.; Noren, N.; Lipson, H.InSolid Freeform Fabrication Symposium, 2010.
- Campbell J., 2005, J. Text. Apparel, Technol. Manage., 4, 1
- Pan, Y.; Zhou, C.; Chen, Y.InProceedings of the 2012 International Manufacturing Science and Engineering Conference, 2012; pp4–8.
- Takagi, T.; Nakajima, N.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp173–178.
- Ikuta, K.; Hirowatari, K.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp42–47.
- Strutt J. W., 1879, Tr. Mat. O-va, 4
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Landers R., 2002, J. Mater. Sci., 37, 3107, 10.1023/A:1016189724389 · DOI · Paper page
- Kruth, J.P.; Levy, G.; Schindel, R.; Craeghs, T.; Yasa, E.InProceedings of the 3rd International Conference on Polymers and Moulds Innovations, 2008; pp15–30;
- Van Weeren, R.; Agarwala, M.; Jamalabad, V.; Bandyophadyay, A.; Vaidyanathan, R.; Langrana, N.; Safari, A.; Whalen, P.; Danforth, S.; Ballard, C.InProceedings of the Solid Freeform Fabrication Symposium;ASME:New York, 1995; pp314–321.
- Agarwala, M.; Van Weeren, R.; Bandyopadhyay, A.; Whalen, P.; Safari, A.; Danforth, S.InProceedings of Solid Freeform Fabrication Symposium, The University of Texas, Austin, TX, August 12–14, 1996; pp385–392.
- Frank, M. C.; Peters, F. E.; Karthikeyan, R.24th Annual International Solid Freeform Fabrication Symposium–An Additive Manufacturing Conference, The University of Texas at Austin, Austin, TX, 2010.
- Flach, L.; Jacobs, M. A.; Klosterman, D. A.; Chartoff, R.InSolid Freeform Fabrication Symposium Proceedings, University of Texas at Austin, Austin, TX, 1998; pp407–416.
- Leukers B., 2005, Mater. Sci. Eng. Technol., 36, 781
- Mironov V., 2003, Trends Biotechnol., 21, 151, 10.1016/S0167-7799(03)00033-7 · DOI · Paper page
- Tam M. D., 2012, Radiol. Case, 6, 31
- Klepacek I., 2012, Forensic Sci. Med. Pathol., 8, 451
- Noecker A. M., 2006, Pediatr. Circ. Support Perfusion, 52, 349
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Mathieson J. S., 2013, Beilstein J. Org. Chem., 4, 285
Cited by
Items 301–400 of 1,001
Accuracy of a simplified 3D-printed implant surgical guide
Kim, T., Lee, S., Kim, G. B., Hong, D., Kwon, J., Park, J., & Kim, N. (2019) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2019.06.006 · Cited by 96
3D Bioprinting Using Hydrogels: Cell Inks and Tissue Engineering Applications
Dell, A. C., Wagner, G. A., Own, J., & Geibel, J. P. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14122596 · Cited by 112
“Since its inception, the impact of 3D printing technology has grown rapidly in medical and scientific research and has expanded to include the printing of biological materials, namely, cells, biocompatible materials, and components that support functional living tissue [17,100,101].”
BackgroundInverse methods for material design
Jain, A., Bollinger, J. A., & Truskett, T. M. (2014) · AIChE Journal · doi:10.1002/aic.14491 · Cited by 110
Autonomous microfluidic capillaric circuits replicated from 3D-printed molds
Olanrewaju, A. O., Robillard, A., Dagher, M., & Juncker, D. (2016) · Lab on a Chip · doi:10.1039/c6lc00764c · Cited by 95
White paper on the future of plasma science and technology in plastics and textiles
Cvelbar, U., Walsh, J. L., Černák, M., de Vries, H. W., Reuter, S., Belmonte, T., Corbella, C., Miron, C., Hojnik, N., Jurov, A., et al. (2018) · Plasma Processes and Polymers · doi:10.1002/ppap.201700228 · Cited by 102
Rapid Softlithography Using 3D‐Printed Molds
Bazaz, S. R., Kashaninejad, N., Azadi, S., Patel, K., Asadnia, M., Jin, D., & Warkiani, M. E. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900425 · Cited by 99
Understanding Spatially Complex Segmental and Branch Anatomy Using 3D Printing
Javan, R., Herrin, D., & Tangestanipoor, A. (2016) · Academic Radiology · doi:10.1016/j.acra.2016.04.010 · Cited by 94
The dawn of unmanned analytical laboratories
Prabhu, G. R. D., & Urban, P. L. (2016) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2016.12.011 · Cited by 105
DNA biosensing with 3D printing technology
Loo, A. H., Chua, C. K., & Pumera, M. (2016) · The Analyst · doi:10.1039/c6an02038k · Cited by 94
Duarte, L. C., Chagas, C. L. S., Ribeiro, L. E. B., & Coltro, W. K. T. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.05.011 · Cited by 94
Gülteki̇n, H. E., Tort, S., & Acartürk, F. (2019) · Pharmaceutical Research · doi:10.1007/s11095-019-2655-y · Cited by 94
Li, H., Hu, K., Liu, Y., Lu, Z., & Liang, J. (2020) · Scripta Materialia · doi:10.1016/j.scriptamat.2020.113665 · Cited by 94
Clinical applications and prospects of 3D printing guide templates in orthopaedics
Meng, M., Wang, J., Sun, T., Zhang, W., Zhang, J., Shu, L., & Li, Z. (2022) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2022.03.001 · Cited by 94
“In 1988, they invented the first printer which is regarded as a pioneer in 3D printing technology [16].”
Background3D printed structures for delivery of biomolecules and cells: tissue repair and regeneration
Park, J. Y., Gao, G., Jang, J., & Cho, D.-W. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb01662f · Cited by 93
Incorporation of graphitic nano‐filler and poly(lactic acid) in fused deposition modeling
Wang, Y., Zhang, J., Wu, J. R., Wang, X., & Deng, Y. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.44703 · Cited by 93
3D-printed Ag/AgCl pseudo-reference electrodes
Rohaizad, N., Mayorga‐Martinez, C. C., Novotný, F., Webster, R. D., & Pumera, M. (2019) · Electrochemistry Communications · doi:10.1016/j.elecom.2019.05.010 · Cited by 96
Zheng, F., Xiao, Y., Liu, H., Fan, Y., & Dao, M. (2021) · Advanced Biology · doi:10.1002/adbi.202000024 · Cited by 107
Zhang, J., Chen, F., He, Z., Ma, Y., Uchiyama, K., & Lin, J.-M. (2016) · The Analyst · doi:10.1039/c6an00395h · Cited by 90
3D bioprinting of soft materials-based regenerative vascular structures and tissues
Zhang, Z., Wang, B., Hui, D., Qiu, J., & Wang, S. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.05.011 · Cited by 99
Advances in Microchip Liquid Chromatography
Yuan, X., & Oleschuk, R. D. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b04329 · Cited by 91
Accurate and rapid 3D printing of microfluidic devices using wavelength selection on a DLP printer
van der Linden, P., Popov, A. M., & Pontoni, D. (2020) · Lab on a Chip · doi:10.1039/d0lc00767f · Cited by 91
Emerging Business Models for Open Source Hardware
Pearce, J. M. (2017) · Journal of Open Hardware · doi:10.5334/joh.4 · Cited by 96
“…(Car-valho and Eyre, 2013), microfluid handlers (Da Costa, et al., 2014), biotechnological and chemical labware (Luck-ing et al., 2014; Gross et al., 2014; Su et al., 2014), mass spectroscopy equipment (Malonado-Torres et al., 2014; Chiu and Urban, 2015), automated sensing arrays…”
BackgroundAdvances in 3D printing of magnetic materials: Fabrication, properties, and their applications
Wei, X., Jin, M., Yang, H., Wang, X., Long, Y., & Chen, Z. (2022) · Journal of Advanced Ceramics · doi:10.1007/s40145-022-0567-5 · Cited by 101
“Recently, 3D printing has found widespread applications in biomedical engineering, such as tissue scaffolding and drug delivery [46,47,77,92,219].”
BackgroundMethodYuan, M., Wang, L., Liu, X., Du, X., Zhang, G., Chang, Y., Xia, Q., Hu, Q., & Zhou, A. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138686 · Cited by 93
Dong, J., Li, M., Zhou, L., Lee, S., Mei, C., Xu, X., & Wu, Q. (2017) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24333 · Cited by 92
3D-Printed Paper Spray Ionization Cartridge with Fast Wetting and Continuous Solvent Supply Features
Salentijn, G. I., Permentier, H. P., & Verpoorte, E. M. J. (2014) · Analytical Chemistry · doi:10.1021/ac502785j · Cited by 88
A Review of Arterial Phantom Fabrication Methods for Flow Measurement Using PIV Techniques
Yazdi, S. G., Geoghegan, P. H., Docherty, P. D., Jermy, M., & Khanafer, A. (2018) · Annals of Biomedical Engineering · doi:10.1007/s10439-018-2085-8 · Cited by 99
3D scaffolds for brain tissue regeneration: architectural challenges
Mahumane, G. D., Kumar, P., du Toit, L. C., Choonara, Y. E., & Pillay, V. (2018) · Biomaterials Science · doi:10.1039/c8bm00422f · Cited by 99
Lee, H., Eom, R.-I., & Lee, Y. (2019) · Advances in Materials Science and Engineering · doi:10.1155/2019/5838361 · Cited by 94
4D bioprinting of tissues and organs
Amukarimi, S., & Mozafari, M. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00161 · Cited by 88
Conductive Cellulose Composites with Low Percolation Threshold for 3D Printed Electronics
Park, J. S., Kim, T., & Kim, W. S. (2017) · Scientific Reports · doi:10.1038/s41598-017-03365-w · Cited by 92
Zhang, J., Xu, P., Vo, A. Q., Bandari, S., Yang, F., Dürig, T., & Repka, M. A. (2019) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2019.04.043 · Cited by 88
“layer-by-layer production of 3D objects from digital blueprints [2].”
BackgroundTang, C. K., Vaze, A., & Rusling, J. F. (2017) · Lab on a Chip · doi:10.1039/c6lc01238h · Cited by 87
High-speed on-demand 3D printed bioresorbable vascular scaffolds
Ware, H. O. T., Farsheed, A. C., Akar, B., Duan, C., Chen, X., Ameer, G. A., & Sun, C. (2017) · Materials Today Chemistry · doi:10.1016/j.mtchem.2017.10.002 · Cited by 89
Tempelman, J. R., Wachtor, A. J., FLYNN, E. B., Depond, P. J., Forien, J., Guss, G. M., Calta, N. P., & Matthews, M. J. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102735 · Cited by 119
3D printing in personalized medicines: A focus on applications of the technology
Pavan Kalyan, B. G., Mehrotra, S., Marques, S. M., Kumar, L., & Verma, R. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.105875 · Cited by 104
Wilson, J. A., Luong, D., Kleinfehn, A. P., Sallam, S., Wesdemiotis, C., & Becker, M. L. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b09978 · Cited by 94
Manufacturing Strategies for Solid Electrolyte in Batteries
Chen, A., Qu, C., Shi, Y., & Shi, F. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.571440 · Cited by 86
2D and 3D-printing of self-healing gels: design and extrusion of self-rolling objects
Nadgorny, M., Xiao, Z., & Connal, L. A. (2017) · Molecular Systems Design & Engineering · doi:10.1039/c7me00023e · Cited by 88
Feng, Z., Li, Y., Hao, L., Yang, Y., Tang, T., Tang, D., & Xiong, W. (2019) · Journal of Nanomaterials · doi:10.1155/2019/9710264 · Cited by 90
Wu, B. H., Sufi, A., Biswas, R. G., Hisatsune, A., Moxley‐Paquette, V., Ning, P., Soong, R., Dicks, A. P., & Simpson, A. J. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06281 · Cited by 95
Searching for Rheological Conditions for FFF 3D Printing with PVC Based Flexible Compounds
Calafel, I., Aguirresarobe, R., Peñas, M. I., Santamaría, A., Tierno, M., Conde, J. I., & Pascual, B. (2020) · Materials · doi:10.3390/ma13010178 · Cited by 91
3D printing for drug manufacturing: A perspective on the future of pharmaceuticals
Lepowsky, E., & Taşoğlu, S. (2017) · International Journal of Bioprinting · doi:10.18063/ijb.v1i1.119 · Cited by 103
Ruecha, N., Lee, J., Chae, H., Cheong, H., Soum, V., Preechakasedkit, P., Chailapakul, O., Tanev, G. P., Madsen, J., Rodthongkum, N., et al. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201600267 · Cited by 89
The Current Role of Three-Dimensional Printing in Plastic Surgery
Kamali, P., Dean, D., Skoracki, R. J., Koolen, P. G. L., Paul, M. A., Ibrahim, A. M., & Lin, S. J. (2016) · Plastic & Reconstructive Surgery · doi:10.1097/01.prs.0000479977.37428.8e · Cited by 86
3D Bioprinting of Cellulose Structures from an Ionic Liquid
Markstedt, K., Sundberg, J., & Gatenholm, P. (2014) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2014.0004 · Cited by 89
Applications of Three-Dimensional Printing in Surgery
Li, C., Cheung, T. F., Fan, V. C., Sin, K. M., Wong, C. W. Y., & Leung, G. (2016) · Surgical Innovation · doi:10.1177/1553350616681889 · Cited by 92
“FDM involves the deposition of a stream of semimolten material through a moving extrusion head onto a stage, essentially drawing the object layer by layer.(1,3,4) An extra extrusion head may be required to deposit support material to support overhanging structures, which is removed later.”
BackgroundMethodInfluentialThe role of 3D printing in anatomy education and surgical training: A narrative review
Li, K. H. C., Kui, C., Lee, E. K. M., Ho, C. S., Wong, S. H., Wu, W. K. K., Wong, W. T., Voll, J., Li, G., Liu, T., et al. (2017) · MedEdPublish · doi:10.15694/mep.2017.000092 · Cited by 93
“3Dp has become an effective method for producing various devices across a range of specialty fields, including bioengineering, pharmacology, medical instrument production, forensic science and medical science (Gross et al., 2014; Ventola, 2014).”
MethodBio-Medical applications of Additive Manufacturing: A Review
Sheoran, A. J., Kumar, H., Arora, P. K., & Moona, G. (2020) · Procedia Manufacturing · doi:10.1016/j.promfg.2020.10.093 · Cited by 96
Mechanical Property and Prediction Model for FDM-3D Printed Polylactic Acid (PLA)
Samykano, M. (2021) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-021-05617-4 · Cited by 83
“The G-code file divides the 3D STL file into a sequence of two-dimensional (2D) horizontal cross-sections (25–100 μm) depending on the fabrication technique [26].”
MethodThree dimensional printed nanostructure biomaterials for bone tissue engineering
Marew, T., & Birhanu, G. (2021) · Regenerative Therapy · doi:10.1016/j.reth.2021.05.001 · Cited by 86
“Availability of open access software technology sources helped rapid proliferation and commercialization of the platform for medical application [64].”
BackgroundMethodCustomizable 3D Printed ‘Plug and Play’ Millifluidic Devices for Programmable Fluidics
Tsuda, S., Jaffery, H., Doran, D., Hezwani, M., Robbins, P. J., Yoshida, M., & Cronin, L. (2015) · PLoS ONE · doi:10.1371/journal.pone.0141640 · Cited by 94
“These devices were mostly designed for biological applications [18].”
BackgroundFabricating customized hydrogel contact lens
Childs, A., Li, H., Lewittes, D. M., Dong, B., Liu, W., Shu, X., Sun, C., & Zhang, H. F. (2016) · Scientific Reports · doi:10.1038/srep34905 · Cited by 83
Implementing Quantum Search Algorithm with Metamaterials
Zhang, W., Cheng, K., Wu, C., Wang, Y., Li, H., & Zhang, X. (2017) · Advanced Materials · doi:10.1002/adma.201703986 · Cited by 82
Mathew, A., Kishore, S. R., Tomy, A. T., Sugavaneswaran, M., Scholz, S. G., Elkaseer, A., Wilson, V. H., & Rajan, A. J. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00391-7 · Cited by 96
“The stair-casing/stair-stepping result of layer production causes the AM part’s surface to be rough [16, 17].”
BackgroundPhoto‐Curable 3D Printing of Circularly Polarized Afterglow Metal–Organic Framework Monoliths
Zheng, M., Jin, Z.-B., Ma, Z., Gu, Z., & Zhang, J. (2024) · Advanced Materials · doi:10.1002/adma.202313749 · Cited by 88
4D printing of polyurethane paint-based composites
Su, J.-W., Gao, W., Trinh, K., Kenderes, S. M., Tekin Pulatsu, E., Zhang, C., Whittington, A., Lin, M., & Lin, J. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1618409 · Cited by 81
Fabrication of metal-organic framework architectures with macroscopic size: A review
Fonseca, J., & Gong, T. (2022) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214520 · Cited by 86
3D Printed Micro Free-Flow Electrophoresis Device
Anciaux, S. K., Geiger, M., & Bowser, M. T. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.6b01573 · Cited by 82
Gupta, D. K., Ali, M. H., Ali, A., Jain, P., Anwer, M. K., Iqbal, Z., & Mirza, M. A. (2021) · Journal of drug targeting · doi:10.1080/1061186x.2021.1935973 · Cited by 85
Fan, H., Hu, J., Wang, Y., Zhang, H., Guo, W., Li, J., Xu, S., Liu, P., & Liu, P. (2024) · Optics & Laser Technology · doi:10.1016/j.optlastec.2024.110722 · Cited by 89
3-D Bioprinting of Neural Tissue for Applications in Cell Therapy and Drug Screening
Thomas, M., & Willerth, S. M. (2017) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2017.00069 · Cited by 87
“3-D printing has been widely investigated for industrial rapid prototyping and additive manufacturing protocols (Gross et al., 2014).”
Restrepo, S., Ocampo, S., Ramirez, J. A., Paucar, C. G., & García, C. (2017) · Journal of Physics Conference Series · doi:10.1088/1742-6596/935/1/012036 · Cited by 97
Pollard, M., Hunsicker, E., & Platt, M. (2020) · ACS Sensors · doi:10.1021/acssensors.0c00987 · Cited by 79
Rossi, S., Porta, R., Brenna, D., Puglisi, A., & Benaglia, M. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201612192 · Cited by 80
Multi-Layered Hydrogels for Biomedical Applications
Liu, G., Ding, Z., Yuan, Q., Xie, H., & Gu, Z. (2018) · Frontiers in Chemistry · doi:10.3389/fchem.2018.00439 · Cited by 86
“Up to now, a large amount of literature has reported on the biomedical application of hydrogels generated by 3D printing (Bose et al., 2013; Gross et al., 2014; Muth et al., 2014).”
BackgroundShamma, R. N., Sayed, R. H., Madry, H., Sayed, N. S. E., & Cucchiarini, M. (2021) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2021.0026 · Cited by 88
“A basic procedure has been described for manufacturing 3D objects 15 : first, a CAD software is used to design the 3D structure, then the design is changed into a readable format to split this structure in printable laminae and then sends digital layer-by-layer instructions to the used printer.”
Additive manufacturing for biomedical bone implants: Shaping the future of bones
Razzaq, M. H., Zaheer, M. U., Asghar, H., Aktas, O. C., Aycan, M. F., & Mishra, Y. K. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.100931 · Cited by 87
3D reconstruction of SEM images by use of optical photogrammetry software
Eulitz, M., & Reiss, G. (2015) · Journal of Structural Biology · doi:10.1016/j.jsb.2015.06.010 · Cited by 78
Advances in and prospects of microchip liquid chromatography
Grinias, J. P., & Kennedy, R. T. (2015) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2015.08.002 · Cited by 77
Thermoelectric materials and devices fabricated by additive manufacturing
Du, Y., Chen, J., Meng, Q., Dou, Y., Xu, J., & Shen, S. (2020) · Vacuum · doi:10.1016/j.vacuum.2020.109384 · Cited by 85
3D printing of lignin: Challenges, opportunities and roads onward
Ebers, L.-S., Arya, A., Bowland, C. C., Glasser, W. G., Chmely, S. C., Naskar, A. K., & Laborie, M. G. (2021) · Biopolymers · doi:10.1002/bip.23431 · Cited by 77
Open-Source 3-D Platform for Low-Cost Scientific Instrument Ecosystem
Zhang, C., Wijnen, B., & Pearce, J. M. (2016) · SLAS TECHNOLOGY · doi:10.1177/2211068215624406 · Cited by 77
Heikkinen, I. T. S., Kauppinen, C., Liu, Z., Asikainen, S., Spoljaric, S., Seppälä, J. V., Savin, H. I., & Pearce, J. M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.07.015 · Cited by 77
Hasanzadeh, R., Mihankhah, P., Azdast, T., Rasouli, A., Shamkhali, M., & Park, C. B. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.146616 · Cited by 81
Dixit, C. K., Kadimisetty, K., Otieno, B. A., Tang, C. K., Malla, S., Krause, C. E., & Rusling, J. F. (2015) · The Analyst · doi:10.1039/c5an01829c · Cited by 76
Griffiths, C. A., Howarth, J., Almeida-Rowbotham, G. D., & Rees, A. (2016) · Procedia CIRP · doi:10.1016/j.procir.2015.07.024 · Cited by 76
“The ability to produce complex geometries is especially advantageous in the manufacture of prosthetics and implants, where medical scans can be translated into the .stl files required by AM machinery [18].”
Developing Microfluidic Sensing Devices Using 3D Printing
Rusling, J. F. (2018) · ACS Sensors · doi:10.1021/acssensors.8b00079 · Cited by 76
Ahangar, P., Akoury, E., Luna, A. S. R. G., Nour, A., Weber, M. H., & Rosenzweig, D. H. (2018) · Materials · doi:10.3390/ma11091485 · Cited by 79
“Among the main types of additive manufacturing, fused deposition modeling is one of the least expensive platforms [35].”
BackgroundKadimisetty, K., Malla, S., Bhalerao, K. S., Mosa, I. M., Bhakta, S., Lee, N. H., & Rusling, J. F. (2018) · Analytical Chemistry · doi:10.1021/acs.analchem.8b01198 · Cited by 75
Acrylate‐based photosensitive resin for stereolithographic three‐dimensional printing
Zhang, X., Xu, Y., Li, L., Yan, B., Bao, J., & Zhang, A. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.47487 · Cited by 78
Gupta, V., Alam, F., Verma, P. K., Kannan, A. M., & Kumar, S. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229625 · Cited by 77
3D printed electronics with nanomaterials
Słoma, M. (2023) · Nanoscale · doi:10.1039/d2nr06771d · Cited by 76
Fang, Y., Ni, Y., Leo, S., Wang, B., Basile, V., Taylor, C. R., & Jiang, P. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07220 · Cited by 77
3D printed upper limb prosthetics
Vujaklija, I., & Farina, D. (2018) · Expert Review of Medical Devices · doi:10.1080/17434440.2018.1494568 · Cited by 83
4D anisotropic skeletal muscle tissue constructs fabricated by staircase effect strategy
Miao, S., Nowicki, M. A., Cui, H., Lee, S., Zhou, X., Mills, D. K., & Zhang, L. G. (2019) · Biofabrication · doi:10.1088/1758-5090/ab1d07 · Cited by 76
“Lower layer height usually results in structures with smoother surfaces and the typical layer height of FDM is down to 50 μm [25].”
BackgroundKrkobabić, M., Medarević, D. P., Cvijić, S., Grujić, B., & Ibric, S. R. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.118790 · Cited by 80
Rossegger, E., Höller, R. J., Reisinger, D., Fleisch, M., Strasser, J., Wieser, V., Grießer, T., & Schlögl, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.123631 · Cited by 79
Gupta, V., Talebi, M., Deverell, J. A., Sandron, S., Nesterenko, P. N., Heery, B., Thompson, F., Beirne, S., Wallace, G. G., & Paull, B. (2016) · Analytica Chimica Acta · doi:10.1016/j.aca.2016.01.012 · Cited by 74
Whitley, D., Eidson, R. S., Rudek, I., & Bencharit, S. (2017) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2016.10.017 · Cited by 74
Winer, J. N., Verstraete, F. J. Μ., Cissell, D. D., Lucero, S., Athanasiou, K. A., & Arzi, B. (2017) · Veterinary Surgery · doi:10.1111/vsu.12683 · Cited by 74
“Three-dimensional printing, also known as rapid prototyping, additive manufacturing, or solid-freeform technology, is a precise computer-directed process whereby models are fabricated via successive layering of material.(12,13,15) Threedimensional printing has been applied in industrial design since the 1980s and, due…”
Rodríguez, G., Kú-Herrera, J. D. J., & Hernández-Pérez, A. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1314-x · Cited by 74
Bioprinting technologies for disease modeling
Memic, A., Navaei, A., Mirani, B., Cordova, J. A. V., Aldhahri, M., Dolatshahi-Pirouz, A., Akbari, M., & Nikkhah, M. (2017) · Biotechnology Letters · doi:10.1007/s10529-017-2360-z · Cited by 73
In vitro models of intestinal epithelium: Toward bioengineered systems
Creff, J., Malaquin, L., & Besson, A. (2021) · Journal of Tissue Engineering · doi:10.1177/2041731420985202 · Cited by 86
Zhang, C., Wang, C., Therriault, D., & Heuzey, M.-C. (2022) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2022.107742 · Cited by 80
Meng, S., He, H., Jia, Y., Yu, P., Huang, B., & Chen, J. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44470 · Cited by 73
Belka, M., Ulenberg, S., & Bączek, T. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b04390 · Cited by 73
Inkjet dispensing technologies: recent advances for novel drug discovery
Machekposhti, S. A., Mohaved, S., & Narayan, R. J. (2019) · Expert Opinion on Drug Discovery · doi:10.1080/17460441.2019.1567489 · Cited by 83
“Incomplete interaction with the printed binder solution results in higher porosity [24].”
Background3D-printed Patient-specific Spine Implants: A Systematic Review
Wallace, N., Schaffer, N. E., Aleem, I. S., & Patel, R. (2020) · Clinical Spine Surgery A Spine Publication · doi:10.1097/bsd.0000000000001026 · Cited by 79
Ferrari, F., Striani, R., Fico, D., Alam, M. M., Greco, A., & Corcione, C. E. (2022) · Polymers · doi:10.3390/polym14245519 · Cited by 83
“The fabrication of scaffolds for bone tissue regeneration requires good biomimetic and bioactive properties; therefore, micro- or nanoparticles, comparable to the natural mineral components of bone, are often added to traditional polymers, such as tricalcium phosphate (TP), hydroxyapatite (HA), calcium phosphate cemen…”
BackgroundMethod
Metadata
- Authors
- Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Spence, Dana M.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-30
- Volume
- 86
- Issue
- 7
- Pages
- 3240-3253
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2043704558
- Cited by
- 1,746
- References
- 162
- Citations by year
- 2026: 58 · 2025: 93 · 2024: 130 · 2023: 141 · 2022: 152 · 2021: 154 · 2020: 167 · 2019: 187 · 2018: 224 · 2017: 192 · 2016: 141 · 2015: 83 · 2014: 23
- Type
- other
- Language
- en
- Open access
- closed
- Locations
- Analytical Chemistry (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Social Sciences › Education › Various Chemistry Research Topics
- Keywords
- 3D printing, additive manufacturing, biotechnology, chemical sciences, laboratory applications, printing technology, history of 3D printing, research laboratories, teaching laboratory
- MeSH terms
- Biotechnology, Chemistry, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.