Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
The DOI matches its Crossref record; 148 of the 162 references it cites were found in a registry or an index.
Abstract
Nearing 30 years since its introduction, 3D printing technology is set to revolutionize research and teaching laboratories. This feature encompasses the history of 3D printing, reviews various printing methods, and presents current applications. The authors offer an appraisal of the future direction and impact this technology will have on laboratory settings as 3D printers become more accessible.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Patterning proteins and cells using soft lithography
Kane, R. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00165-9 · Cited by 1,490
Engineering cell shape and function
Singhvi, R., Kumar, A., Lopez, G. P., Stephanopoulos, G. N., Wang, D. I. C., Whitesides, G. M., & Ingber, D. E. (1994) · Science · doi:10.1126/science.8171320 · Cited by 1,453
Research works printed but not linked: 21
- Leukers B., 2005, J. Mater. Sci.: Mater. Med., 16, 1121
- Lipton, J.; Arnold, D.; Nigl, F.; Lopez, N.; Cohen, D.; Noren, N.; Lipson, H.InSolid Freeform Fabrication Symposium, 2010.
- Campbell J., 2005, J. Text. Apparel, Technol. Manage., 4, 1
- Pan, Y.; Zhou, C.; Chen, Y.InProceedings of the 2012 International Manufacturing Science and Engineering Conference, 2012; pp4–8.
- Takagi, T.; Nakajima, N.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp173–178.
- Ikuta, K.; Hirowatari, K.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp42–47.
- Strutt J. W., 1879, Tr. Mat. O-va, 4
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Landers R., 2002, J. Mater. Sci., 37, 3107, 10.1023/A:1016189724389 · DOI · Paper page
- Kruth, J.P.; Levy, G.; Schindel, R.; Craeghs, T.; Yasa, E.InProceedings of the 3rd International Conference on Polymers and Moulds Innovations, 2008; pp15–30;
- Van Weeren, R.; Agarwala, M.; Jamalabad, V.; Bandyophadyay, A.; Vaidyanathan, R.; Langrana, N.; Safari, A.; Whalen, P.; Danforth, S.; Ballard, C.InProceedings of the Solid Freeform Fabrication Symposium;ASME:New York, 1995; pp314–321.
- Agarwala, M.; Van Weeren, R.; Bandyopadhyay, A.; Whalen, P.; Safari, A.; Danforth, S.InProceedings of Solid Freeform Fabrication Symposium, The University of Texas, Austin, TX, August 12–14, 1996; pp385–392.
- Frank, M. C.; Peters, F. E.; Karthikeyan, R.24th Annual International Solid Freeform Fabrication Symposium–An Additive Manufacturing Conference, The University of Texas at Austin, Austin, TX, 2010.
- Flach, L.; Jacobs, M. A.; Klosterman, D. A.; Chartoff, R.InSolid Freeform Fabrication Symposium Proceedings, University of Texas at Austin, Austin, TX, 1998; pp407–416.
- Leukers B., 2005, Mater. Sci. Eng. Technol., 36, 781
- Mironov V., 2003, Trends Biotechnol., 21, 151, 10.1016/S0167-7799(03)00033-7 · DOI · Paper page
- Tam M. D., 2012, Radiol. Case, 6, 31
- Klepacek I., 2012, Forensic Sci. Med. Pathol., 8, 451
- Noecker A. M., 2006, Pediatr. Circ. Support Perfusion, 52, 349
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Mathieson J. S., 2013, Beilstein J. Org. Chem., 4, 285
Cited by
Items 601–700 of 1,001
Digital light processing 3D printing of modified liquid isoprene rubber using thiol-click chemistry
Strohmeier, L., Frommwald, H., & Schlögl, S. (2020) · RSC Advances · doi:10.1039/d0ra04186f · Cited by 47
Think and Print: 3D Printing of Chemical Experiments
Renner, M., & Griesbeck, A. G. (2020) · Journal of Chemical Education · doi:10.1021/acs.jchemed.0c00416 · Cited by 42
Serrano‐Aroca, Á., & Pous‐Serrano, S. (2021) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37238 · Cited by 64
Liu, Y., Chen, C., Summers, S., Medawala, W., & Spence, D. M. (2015) · Integrative Biology · doi:10.1039/c4ib00243a · Cited by 41
Self-citationDoped Halloysite Nanotubes for Use in the 3D Printing of Medical Devices
Weisman, J. A., Jammalamadaka, U. M., Tappa, K. K., & Mills, D. K. (2017) · Bioengineering · doi:10.3390/bioengineering4040096 · Cited by 45
“3D printing is rapidly enabling on-demand and patient-specific antibiotic treatments and has the potential to address many of the disadvantages of current antibiotic carrier systems [34,35].”
Background3D printing for tissue engineering in otolaryngology
Gesù, R. D., Acharya, A. P., Jacobs, I. N., & Gottardi, R. (2019) · Connective Tissue Research · doi:10.1080/03008207.2019.1663837 · Cited by 46
Fabrication of Photothermally Responsive Nanocomposite Hydrogel through 3D Printing
Zhang, L., Zhang, X., Li, L., Liu, Y., Wang, D., Xu, L., Bao, J., & Zhang, A. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900718 · Cited by 41
Lee, J. S., Park, T. H., Ryu, J. Y., Kim, D., Oh, E. J., Kim, H. M., Shim, J., Yun, W., Huh, J. B., Moon, S., et al. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22115409 · Cited by 42
“Many studies are currently being conducted to increase adhesion and bone differentiation by using aggregates of ADSCs [27,28].”
BackgroundAcademic Insights and Perspectives in 3D Printing: A Bibliometric Review
Bai, W., Fang, H., Wang, Y., Zeng, Q., Hu, G., Bao, G., & Wan, Y. (2021) · Applied Sciences · doi:10.3390/app11188298 · Cited by 50
Tyowua, A. T., Harbottle, D., & Binks, B. P. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103274 · Cited by 42
Uysal, B., Madduma‐Bandarage, U. S. K., Jayasinghe, H. G., & Madihally, S. V. (2025) · Gels · doi:10.3390/gels11030192 · Cited by 47
“Anatomical models allow doctors to gain insight into a patient’s specific anatomy to determine the best surgical procedures [174].”
Cellular Analysis Using Microfluidics
Roper, M. G. (2015) · Analytical Chemistry · doi:10.1021/acs.analchem.5b04532 · Cited by 44
Development and Application of 3D Printed Mesoreactors in Chemical Engineering Education
Tabassum, T., Iloska, M., Scuereb, D., Taira, N., Jin, C., Zaitsev, V. Y., Afshar, F., & Kim, T. (2018) · Journal of Chemical Education · doi:10.1021/acs.jchemed.7b00663 · Cited by 41
3D printed fiber optic faceplates by custom controlled fused deposition modeling
Wang, Y., Gawedzinski, J., Pawłowski, M., & Tkaczyk, T. (2018) · Optics Express · doi:10.1364/oe.26.015362 · Cited by 41
Cesewski, E., Haring, A. P., Tong, Y., Singh, M., Thakur, R., Laheri, S., Read, K. A., Powell, M. D., Oestreich, K. J., & Johnson, B. N. (2018) · Lab on a Chip · doi:10.1039/c8lc00427g · Cited by 40
3D Printing Technology: A New Milestone in the Development of Pharmaceuticals
Chandekar, A., Mishra, D. K., Sharma, S., Saraogi, G. K., Gupta, U. D., & Gupta, G. (2019) · Current Pharmaceutical Design · doi:10.2174/1381612825666190507115504 · Cited by 42
Muflikhun, M. A., & Sentanu, D. A. (2021) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2021.105795 · Cited by 40
Schrell, A. M., Mukhitov, N., Yi, L., Adablah, J. E., Menezes, J., & Roper, M. G. (2016) · Analytical Methods · doi:10.1039/c6ay02899c · Cited by 45
Fahimipour, F., Dashtimoghadam, E., Rasoulianboroujeni, M., Yazdimamaghani, M., Khoshroo, K., Tahriri, M., Yadegari, A., Gonzalez, J. A., Vashaee, D., Lobner, D. C., et al. (2017) · Dental Materials · doi:10.1016/j.dental.2017.10.001 · Cited by 40
“The advantages and disadvantages of conventional non-ALM approaches and 3D-printing, have motivated researches to exploit combinatorial fabrication techniques in order to mimic the nature of bone tissue [26].”
3D Printing in Pharmaceuticals: Regulatory Perspective
Mirza, M. A., & Iqbal, Z. (2019) · Current Pharmaceutical Design · doi:10.2174/1381612825666181130163027 · Cited by 39
Digital and lean development method for 3D-printed reactors based on CAD modeling and CFD simulation
Bettermann, S., Kandelhard, F., Moritz, H., & Pauer, W. (2019) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2019.09.024 · Cited by 39
3D Printing in Drug Delivery and Biomedical Applications: A State-of-the-Art Review
Mahmood, M. A. (2021) · Compounds · doi:10.3390/compounds1030009 · Cited by 48
Polyetheretherketone development in bone tissue engineering and orthopedic surgery
Wei, Z., Zhang, Z., Zhu, W., & Weng, X. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1207277 · Cited by 40
“Unlike the traditional processing mode of cutting and assembling raw materials, additive manufacturing (AM), commonly known as three-dimensional (3D) printing, is a “bottom-up” manufacturing method that makes it possible to manufacture complex structural parts that were not possible to manufacture in the past due to t…”
BackgroundA Practical Guide to Image Processing in the Creation of 3D Models for Orthopedics
Green, N., Glatt, V., Tetsworth, K. D., Wilson, L. J., & Grant, C. A. (2016) · Techniques in Orthopaedics · doi:10.1097/bto.0000000000000181 · Cited by 41
“3D printing is potentially one of the most significant technological advances of the modern era.(2,3) Tremendous growth in the consumer and commercial markets has been echoed by the growing demand for high-quality 3D virtual computer models and 3D printed models in all branches of medicine, including orthopedics.”
BackgroundSun, H., Kim, Y., Kim, Y. C., Park, I. K., Suhr, J., Byun, D., Choi, H. R., Kuk, K., Baek, O. H., Jung, Y. K., et al. (2018) · Journal of Materials Chemistry C · doi:10.1039/c7tc04873d · Cited by 38
Munshi, A. S., Chen, C., Townsend, A. D., & Martin, R. S. (2018) · Analytical Methods · doi:10.1039/c8ay00829a · Cited by 38
Self-citationSynthesis of Bio-based Polymer Composites: Fabrication, Fillers, Properties, and Challenges
Murawski, A., Diaz, R., Inglesby, S., Delabar, K., & Quirino, R. L. (2019) · Lecture notes in bioengineering · doi:10.1007/978-3-030-04741-2_2 · Cited by 39
Kulomäki, S., Lahtinen, E., Perämäki, S., & Vaisanen, A. O. (2019) · Analytica Chimica Acta · doi:10.1016/j.aca.2019.09.075 · Cited by 39
3D Printing in Pharmaceutical Sector: An Overview
Ali, A., Ahmad, U., & Akhtar, J. (2020) · IntechOpen eBooks · doi:10.5772/intechopen.90738 · Cited by 51
“Scientists have built an artificial ear, cartilage and bone, and heart valve by the help of 3D printers [2, 47, 55].”
BackgroundInfluentialZhang, J., Chen, D., & Chen, S.-C. (2022) · Building and Environment · doi:10.1016/j.buildenv.2022.109348 · Cited by 39
Additive manufacturing of functional devices for environmental applications: A review
Fagundes, A. P., Lira, J. O. D. B., Padoin, N., Soares, C., & Riella, H. G. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.108049 · Cited by 43
Day, K. M., Phillips, P. M., & Sargent, L. A. (2017) · Craniomaxillofacial Trauma & Reconstruction · doi:10.1055/s-0037-1601432 · Cited by 38
Advances and challenges of the cell-based therapies among diabetic patients
Raoufinia, R., Rahimi, H. R., Saburi, E., & Moghbeli, M. (2024) · Journal of Translational Medicine · doi:10.1186/s12967-024-05226-3 · Cited by 43
“∼ 250 μm by nozzle diameter [68].”
BackgroundCho, D., & Yoo, H. J. (2014) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2014.2368071 · Cited by 37
Brooks, J. C., Ford, K. I., Holder, D. H., Holtan, M. D., & Easley, C. J. (2016) · The Analyst · doi:10.1039/c6an01055e · Cited by 37
Screen printing and other scalable point of care (POC) biosensor processing technologies
Gonzalez‐Macia, L., & Killard, A. J. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100072-4.00004-6 · Cited by 38
Liang, Y., Zhu, L., Gao, J., Zhao, H., Zhu, Y., Ye, S., & Fang, Q. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15933 · Cited by 38
3D Printing Technology in Design of Pharmaceutical Products
Zafar, A., Alruwaili, N. K., Rizwanullah, M., Bukhari, S. N. A., Amir, M., Ahmed, M. M., & Fazil, M. (2019) · Current Pharmaceutical Design · doi:10.2174/1381612825666190116104620 · Cited by 38
Ashish, Ahmad, N., Gopinath, P., & Vinogradov, A. V. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815890-6.00001-3 · Cited by 48
Establishing a point-of-care additive manufacturing workflow for clinical use
Daoud, G. E., Pezzutti, D. L., Dolatowski, C. J., Carrau, R. L., Pancake, M., Herderick, E. D., & VanKoevering, K. K. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00270-x · Cited by 43
Picroscope: low-cost system for simultaneous longitudinal biological imaging
Ly, V. T., Baudin, P. V., Pansodtee, P., Jung, E. A., Voitiuk, K., Rosen, Y., Willsey, H. R., Mantalas, G. L., Seiler, S. T., Selberg, J. A., et al. (2021) · Communications Biology · doi:10.1038/s42003-021-02779-7 · Cited by 40
Electrical anisotropy controlled heating of acrylonitrile butadiene styrene 3D printed parts
Guadagno, L., Aliberti, F., Longo, R., Raimondo, M., Pantani, R., Sorrentino, A., Catauro, M., & Vertuccio, L. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111507 · Cited by 37
UV‐assisted three‐dimensional printing of polymer nanocomposites based on inorganic fillers
Postiglione, G., Natale, G., Griffini, G., Levi, M., & Turri, S. (2015) · Polymer Composites · doi:10.1002/pc.23735 · Cited by 37
Open-Source Automated Mapping Four-Point Probe
Chandra, H., Allen, S., Oberloier, S., Bihari, N., Gwamuri, J., & Pearce, J. M. (2017) · Materials · doi:10.3390/ma10020110 · Cited by 37
Saem, S., Zhu, Y., Luu, H., & Moran-Mirabal, J. M. (2017) · Sensors · doi:10.3390/s17040732 · Cited by 42
“To overcome the limitations of cost, time, material properties, and processing, non-traditional techniques are being explored, including xurography [13,15,18], adhesive stencil lift off [15,18–20], shape-memory polymers (SMP) [13,15,20–22], ink jet printing [23,24], paper-based microfluidic devices [5,7,25–27], and 3D…”
MethodEmerging Role of Three-Dimensional Printing in Simulation in Otolaryngology
VanKoevering, K. K., & Malloy, K. M. (2017) · Otolaryngologic Clinics of North America · doi:10.1016/j.otc.2017.05.006 · Cited by 37
Catalytic Materials by 3D Printing: A Mini Review
Chen, L., Zhou, S., Li, M., Mo, F., Yu, S., & Wei, J. (2022) · Catalysts · doi:10.3390/catal12101081 · Cited by 39
Berkane, Y., Oubari, H., Dieren, L. V., Charlès, L., Lupon, E. L., McCarthy, M. E., Cetrulo, C. L., Bertheuil, N., Uygun, B. E., Smadja, D. M., et al. (2023) · Annals of Translational Medicine · doi:10.21037/atm-23-1724 · Cited by 41
“The first 3D patent was granted in 1986, and the first description of bioprinting was in 2003 (87).”
BackgroundAdvances in 2D/3D Printing of Functional Nanomaterials and Their Applications
Choi, J.-Y., Das, S., Theodore, N. D., Kim, I., Honsberg, C. B., Choi, H. W., & Alford, T. L. (2015) · ECS Journal of Solid State Science and Technology · doi:10.1149/2.0011504jss · Cited by 36
A low cost, easy to build, portable, and universal autosampler for liquids
Carvalho, M. C., & Eyre, B. D. (2013) · Methods in Oceanography · doi:10.1016/j.mio.2014.06.001 · Cited by 36
Dossi, N., Terzi, F., Piccin, E., Toniolo, R., & Bontempelli, G. (2015) · Electroanalysis · doi:10.1002/elan.201500361 · Cited by 37
Wang, Y., Yu, H., Yang, H., Hao, X., Tang, Q., & Zhang, X. (2017) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201700348 · Cited by 38
Fallon, J. J., Kolb, B. Q., Herwig, C., Foster, E. J., & Bortner, M. J. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46992 · Cited by 40
A Collaborative and Ubiquitous System for Fabricating Dental Parts Using 3D Printing Technologies
Wang, Y.-C., Chen, T., & Lin, Y.-C. (2019) · Healthcare · doi:10.3390/healthcare7030103 · Cited by 39
“The application of 3D printing to fabricating dental parts emerged in the early 2000s [34].”
BackgroundJönsson, A., Toppi, A., & Dufva, M. (2020) · HardwareX · doi:10.1016/j.ohx.2020.e00115 · Cited by 36
“Fused Filament Fabrication (FFF), also known as Fused Deposition Modeling (FDM), is perhaps the most well-known 3Dprinting process for consumer use, with its low cost and straightforward fabrication workflow [28].”
Yafia, M., Ahmadi, A., Hoorfar, M., & Najjaran, H. (2015) · Micromachines · doi:10.3390/mi6091289 · Cited by 36
Additive Manufacturing and Big Data
Lidong, L., & Alexander, C. A. (2016) · International Journal of Mathematical Engineering and Management Sciences · doi:10.33889/ijmems.2016.1.3-012 · Cited by 37
“Drug delivery services have significantly utilized inkjet-based 3D printing (Gross et al., 2014).”
BackgroundMethodHatami, H., Mojahedian, M. M., Kesharwani, P., & Sahebkar, A. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113245 · Cited by 35
Hibbert, K., Warner, G. M., Brown, C. A., Ajide, O. O., Owolabi, G., & Azimi, A. (2019) · Open Journal of Organic Polymer Materials · doi:10.4236/ojopm.2019.91001 · Cited by 35
“Research concerns in AM have risen in a number of distinct ways [9].”
BackgroundLee, M., Moharem-Elgamal, S., Beckingham, R., Hamilton, M. C. K., Manghat, N. E., Milano, E. G., Bucciarelli‐Ducci, C., Caputo, M., & Biglino, G. (2019) · BMJ Open · doi:10.1136/bmjopen-2018-025227 · Cited by 39
“For physicians, the use of a patient-specific model is preferable to looking at CT and MRI scans as they are viewed on a 2D flat screen.(25) This indicates that 3D-printed models may bring an added aspect to multidisciplinary meeting discussions, perhaps due to the ability to hold and rotate the model from different a…”
MethodAtomic Force Microscope‐Based Meniscus‐Confined Three‐Dimensional Electrodeposition
Eliyahu, D., Gileadi, E., Galun, E., & Eliaz, N. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900827 · Cited by 35
Design and development of 3D printed catalytically-active stirrers for chemical synthesis
Penny, M. R., & Hilton, S. T. (2020) · Reaction Chemistry & Engineering · doi:10.1039/c9re00492k · Cited by 35
Smartdust 3D‐Printed Graphene‐Based Al/Ga Robots for Photocatalytic Degradation of Explosives
Khezri, B., Villa, K., Novotný, F., Sofer, Z., & Pumera, M. (2020) · Small · doi:10.1002/smll.202002111 · Cited by 36
Wu, C., Chen, J., & Su, C. (2022) · Analytica Chimica Acta · doi:10.1016/j.aca.2022.339733 · Cited by 36
Chinchanikar, S. S., Shinde, S., Shaikh, A., Gaikwad, V. S., & Ambhore, N. (2023) · Journal of The Institution of Engineers (India) Series D · doi:10.1007/s40033-023-00459-w · Cited by 35
“However, earlier several iterations are required while designing the products based on their failure mode analysis [1].”
Made-on-demand, complex and personalized 3D-printed drug products
Osouli-Bostanabad, K., & Adibkia, K. (2018) · Bioimpacts · doi:10.15171/bi.2018.09 · Cited by 36
Jivrakh, K. B., Reddy, K. S. K., Dumée, L. F., Polychronopoulou, K., Al‐Rub, R. K. A., Alamoodi, N., & Karanikolos, G. N. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.143522 · Cited by 37
Hu, J.-B., Chen, T.-R., Chang, C., Cheng, J., Chen, Y., & Urban, P. L. (2015) · The Analyst · doi:10.1039/c4an02220c · Cited by 34
Quantitative evaluation of performance of three-dimensional printed lenses
Gawedzinski, J., Pawłowski, M. E., & Tkaczyk, T. (2017) · Optical Engineering · doi:10.1117/1.oe.56.8.084110 · Cited by 34
3D Printing of Human Anatomical Models for Preoperative Surgical Planning
Paramasivam, V., Sindhu, Singh, G., & Santhanakrishnan, S. (2020) · Procedia Manufacturing · doi:10.1016/j.promfg.2020.05.100 · Cited by 34
Extrusion-based sustainable 3D bioprinting of meat & its analogues: A review
Tibrewal, K., Dandekar, P. P., & Jain, R. D. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00256 · Cited by 39
3D-Printed Paper Spray Ionization Cartridge with Integrated Desolvation Feature and Ion Optics
Salentijn, G. I., Oleschuk, R. D., & Verpoorte, E. M. J. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b02490 · Cited by 34
Enthusiastic portrayal of 3D bioprinting in the media: Ethical side effects
Gilbert, F., Viaña, J. N. M., O’Connell, C. D., & Dodds, S. (2017) · Bioethics · doi:10.1111/bioe.12414 · Cited by 34
On the potential use of two-photon polymerization to 3D print chromatographic packed bed supports
Matheuse, F., Vanmol, K., Erps, J. V., Malsche, W. D., Ottevaere, H., & Desmet, G. (2021) · Journal of Chromatography A · doi:10.1016/j.chroma.2021.462763 · Cited by 37
3D printing of pharmaceuticals: approach from bench scale to commercial development
Pawar, R., & Pawar, A. (2022) · Future Journal of Pharmaceutical Sciences · doi:10.1186/s43094-022-00439-z · Cited by 47
“Background 3D printing technology has been used in a variety of applications for over 30 years, including automotive, robotics, prototyping and chemical sciences [1].”
Advancements in 3D-4D printing of hydroxyapatite composites for bone tissue engineering
Chopra, V., Fuentes-Velasco, V., Nacif-Lopez, S. R., Melendez-Malpicca, J., Mendez-Hernandez, A. S., Ramos-Mendez-Iris, L. F., Arroyo-Jimenez, D. A., Reyes-Segura, D. G., Gonzalez-Y-Mendoza, P., Sanchez-Hernandez, K. A., et al. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.07.266 · Cited by 35
Spray deposition of Nafion membranes: Electrode-supported fuel cells
Bayer, T., Pham, H. C., Sasaki, K., & Lyth, S. M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.059 · Cited by 35
3D Printing-Based Integrated Water Quality Sensing System
Banna, M. H., Bera, K., Sochol, R. D., Lin, L., Najjaran, H., Sadiq, R., & Hoorfar, M. (2017) · Sensors · doi:10.3390/s17061336 · Cited by 33
“, bionic ear, microvascular formation [10]).”
BackgroundWijnen, B., Sanders, P. G., & Pearce, J. M. (2018) · Progress in Additive Manufacturing · doi:10.1007/s40964-018-0052-4 · Cited by 39
“With this rapid technological evolution, FFF 3-D printing applications have also exploded and have opened many doors for applications that were previously only affordable for large companies such as: open source appropriate technology for sustainable development [811], personal fabrication [12], small custom print sho…”
BackgroundVárga, P., Lôrinczy, D., Tóth, L., Péntek, A., Nyitrai, M., & Maróti, P. (2019) · Materials Research Express · doi:10.1088/2053-1591/aafdbc · Cited by 37
Use of 3D bioprinting in biomedical engineering for clinical application
Karzyński, K., Kosowska, K., Ambrożkiewicz, F., Berman, A., Cichoń, J., Klak, M., Serwańska-Świętek, M., & Wszola, M. (2018) · Medical Studies · doi:10.5114/ms.2018.74827 · Cited by 39
“Four years later the first commercial 3D printer (SLA-250) appeared on the global market called a ‘Stereolithography Apparatus’ [7, 8].”
BackgroundFabrication of Designable and Suspended Microfibers via Low-Voltage 3D Micropatterning
Gill, E., Willis, S., Gerigk, M., Cohen, P., Zhang, D., Li, X., & Huang, Y. Y. S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b01258 · Cited by 33
Research progress of 3D printing combined with thermoplastic foaming
Sun, B., & Wu, L. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.1083931 · Cited by 32
“It performs significantly more than just its conventional role in rapid prototyping, rapid tooling, and concept modeling (Gross et al., 2014).”
BackgroundHedayati, R., Alavi, M., & Sadighi, M. (2024) · Materials · doi:10.3390/ma17153674 · Cited by 36
“The effect of time on the mechanical properties of PLA, particularly its stress–strain curve, can depend on several factors, including the environmental conditions to which the material is exposed, such as exposure to UV light, moisture, other external factors, and the rate of loading [20,21].”
Background3D printing of drug delivery systems enhanced with micro/nano-technology
Zhu, H., Kuang, H., Huang, X., Li, X., Zhao, R., Shang, G., Wang, Z., Liao, Y.-C., He, J., & Li, D. (2024) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2024.115479 · Cited by 37
Principles of three-dimensional printing and clinical applications within the abdomen and pelvis
Bastawrous, S., Wake, N., Levin, D. B., & Ripley, B. A. (2018) · Abdominal Radiology · doi:10.1007/s00261-018-1554-8 · Cited by 32
Street, D. P., Mah, A. H., Patterson, S., Pickel, D. L., Bergman, J. A., Stein, G. E., Messman, J. M., & Kilbey, S. M. (2018) · Polymer · doi:10.1016/j.polymer.2018.10.004 · Cited by 34
McCracken, J. M., Rauzan, B. M., Kjellman, J. C. E., Kandel, M. E., Liu, Y. H., Badea, A., Miller, L. A., Rogers, S. A., Popescu, G., & Nuzzo, R. G. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800788 · Cited by 37
Ceballos, M. R., Estela, J. M., Cerdà, V., & Ferrer, L. (2019) · Talanta · doi:10.1016/j.talanta.2019.05.026 · Cited by 34
Siller, I. G., Enders, A., Steinwedel, T., Epping, N.-M., Kirsch, M., Lavrentieva, A. V., Scheper, T. H., & Bahnemann, J. (2019) · Materials · doi:10.3390/ma12132125 · Cited by 36
“One major challenge associated with introducing foreign material into an organic system is the concept of “biological compatibility” or “biocompatibility” [1].”
BackgroundInfluentialAccessing multidimensional mixing via 3D printing and showerhead micromixer design
Zhang, H.-M., Kopfmüller, T., Achermann, R., Zhang, J.-S., Teixeira, A. R., Shen, Y., & Jensen, K. (2020) · AIChE Journal · doi:10.1002/aic.16873 · Cited by 26
Selection of additive manufacturing technologies in productive systems: a decision support model
Calderaro, D. R., Lacerda, D. P., & Veit, D. R. (2020) · Gestão & Produção · doi:10.1590/0104-530x5363-20 · Cited by 32
Magnetically tunable damping in composites for 4D printing
Bonifacich, F. G., Lambri, O. A., Recarte, V., Sánchez-Alarcos, V., & Pérez-Landazábal, J. I. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108538 · Cited by 32
Additive manufacturing of hydroxyapatite and its composite materials: A review
Yan, C., Ma, G., Chen, A., Chen, Y. G., Wu, J., Wang, W., Yang, S., & Shi, Y. (2020) · Journal of Micromechanics and Molecular Physics · doi:10.1142/s2424913020300029 · Cited by 32
Gao, M., He, D., Guo, X., Wu, H., Tan, Z. W., Xu, W., Shao, W., & Wang, G. (2022) · Structures · doi:10.1016/j.istruc.2022.08.050 · Cited by 32
Fault Detection in 3D Printing: A Study on Sensor Positioning and Vibrational Patterns
Isiani, A., Weiss, L., Bardaweel, H., Nguyen, H. T., & Crittenden, K. (2023) · Sensors · doi:10.3390/s23177524 · Cited by 31
Finny, A. S. (2024) · PeerJ · doi:10.7717/peerj.16897 · Cited by 34
“This con fl uence of biotechnology and additive manufacturing holds signi fi cant promise for developing innovative bioremediation strategies ( Gross et al., 2014 ).”
BackgroundSculpting the future: A narrative review of 3D printing in plastic surgery and prosthetic devices
Zahid, M. J., Mavani, P. T., Awuah, W. A., Alabdulrahman, M., Punukollu, R., Kundu, A., Mago, A., Maher, K., Adebusoye, F. T., & Khan, T. N. (2024) · Health Science Reports · doi:10.1002/hsr2.2205 · Cited by 31
“7,8 Various companies later created 3D printers for commercial and industrial uses.”
BackgroundNabavi, S. F., & Dalir, H. (2024) · Optics & Laser Technology · doi:10.1016/j.optlastec.2024.111713 · Cited by 33
Sequentially Reinforced Additive Coating for Transparent and Durable Superhydrophobic Glass
Zhao, S., Zhao, J., Wen, M., Yao, M. Q., Wang, F., Huang, F., Zhang, Q., Cheng, Y., & Zhong, J. P. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b01960 · Cited by 31
Metadata
- Authors
- Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Spence, Dana M.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-30
- Volume
- 86
- Issue
- 7
- Pages
- 3240-3253
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2043704558
- Cited by
- 1,746
- References
- 162
- Citations by year
- 2026: 58 · 2025: 93 · 2024: 130 · 2023: 141 · 2022: 152 · 2021: 154 · 2020: 167 · 2019: 187 · 2018: 224 · 2017: 192 · 2016: 141 · 2015: 83 · 2014: 23
- Type
- other
- Language
- en
- Open access
- closed
- Locations
- Analytical Chemistry (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Social Sciences › Education › Various Chemistry Research Topics
- Keywords
- 3D printing, additive manufacturing, biotechnology, chemical sciences, laboratory applications, printing technology, history of 3D printing, research laboratories, teaching laboratory
- MeSH terms
- Biotechnology, Chemistry, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.