Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
The DOI matches its Crossref record; 148 of the 162 references it cites were found in a registry or an index.
Abstract
Nearing 30 years since its introduction, 3D printing technology is set to revolutionize research and teaching laboratories. This feature encompasses the history of 3D printing, reviews various printing methods, and presents current applications. The authors offer an appraisal of the future direction and impact this technology will have on laboratory settings as 3D printers become more accessible.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Patterning proteins and cells using soft lithography
Kane, R. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00165-9 · Cited by 1,490
Engineering cell shape and function
Singhvi, R., Kumar, A., Lopez, G. P., Stephanopoulos, G. N., Wang, D. I. C., Whitesides, G. M., & Ingber, D. E. (1994) · Science · doi:10.1126/science.8171320 · Cited by 1,453
Research works printed but not linked: 21
- Leukers B., 2005, J. Mater. Sci.: Mater. Med., 16, 1121
- Lipton, J.; Arnold, D.; Nigl, F.; Lopez, N.; Cohen, D.; Noren, N.; Lipson, H.InSolid Freeform Fabrication Symposium, 2010.
- Campbell J., 2005, J. Text. Apparel, Technol. Manage., 4, 1
- Pan, Y.; Zhou, C.; Chen, Y.InProceedings of the 2012 International Manufacturing Science and Engineering Conference, 2012; pp4–8.
- Takagi, T.; Nakajima, N.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp173–178.
- Ikuta, K.; Hirowatari, K.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp42–47.
- Strutt J. W., 1879, Tr. Mat. O-va, 4
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Landers R., 2002, J. Mater. Sci., 37, 3107, 10.1023/A:1016189724389 · DOI · Paper page
- Kruth, J.P.; Levy, G.; Schindel, R.; Craeghs, T.; Yasa, E.InProceedings of the 3rd International Conference on Polymers and Moulds Innovations, 2008; pp15–30;
- Van Weeren, R.; Agarwala, M.; Jamalabad, V.; Bandyophadyay, A.; Vaidyanathan, R.; Langrana, N.; Safari, A.; Whalen, P.; Danforth, S.; Ballard, C.InProceedings of the Solid Freeform Fabrication Symposium;ASME:New York, 1995; pp314–321.
- Agarwala, M.; Van Weeren, R.; Bandyopadhyay, A.; Whalen, P.; Safari, A.; Danforth, S.InProceedings of Solid Freeform Fabrication Symposium, The University of Texas, Austin, TX, August 12–14, 1996; pp385–392.
- Frank, M. C.; Peters, F. E.; Karthikeyan, R.24th Annual International Solid Freeform Fabrication Symposium–An Additive Manufacturing Conference, The University of Texas at Austin, Austin, TX, 2010.
- Flach, L.; Jacobs, M. A.; Klosterman, D. A.; Chartoff, R.InSolid Freeform Fabrication Symposium Proceedings, University of Texas at Austin, Austin, TX, 1998; pp407–416.
- Leukers B., 2005, Mater. Sci. Eng. Technol., 36, 781
- Mironov V., 2003, Trends Biotechnol., 21, 151, 10.1016/S0167-7799(03)00033-7 · DOI · Paper page
- Tam M. D., 2012, Radiol. Case, 6, 31
- Klepacek I., 2012, Forensic Sci. Med. Pathol., 8, 451
- Noecker A. M., 2006, Pediatr. Circ. Support Perfusion, 52, 349
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Mathieson J. S., 2013, Beilstein J. Org. Chem., 4, 285
Cited by
Items 101–200 of 1,001
Additive manufacturing technologies: Industrial and medical applications
Rouf, S., Malik, A., Singh, N., Raina, A., Naveed, N., Siddiqui, M. I. H., & Haq, M. I. U. (2022) · Sustainable Operations and Computers · doi:10.1016/j.susoc.2022.05.001 · Cited by 227
Recent advances in 3D printing technologies for wearable (bio)sensors
Kalkal, A., Kumar, S., Kumar, P., Pradhan, R., Willander, M., Packirisamy, G., Kumar, S., & Malhotra, B. D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102088 · Cited by 232
Vithani, K., Goyanes, A., Jannin, V., Basit, A. W., Gaisford, S., & Boyd, B. J. (2019) · Pharmaceutical Research · doi:10.1007/s11095-018-2531-1 · Cited by 233
Al Rashid, A., Khan, S. A., G. Al-Ghamdi, S., & Koç, M. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.016 · Cited by 225
“AM has found widespread use in biomaterials, regenerative medicine, tissue engineering, drug delivery, and laboratory device prototyping [120 e 122].”
Method3D printed microfluidics: advances in strategies, integration, and applications
Su, R., Wang, F., & McAlpine, M. C. (2023) · Lab on a Chip · doi:10.1039/d2lc01177h · Cited by 226
3D printed porous carbon anode for enhanced power generation in microbial fuel cell
Bian, B., Shi, D., Cai, X., Hu, M., Guo, Q., Zhang, C., Wang, Q., Sun, A. X., & Yang, J. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.11.070 · Cited by 235
Three-Dimensional Printing of pH-Responsive and Functional Polymers on an Affordable Desktop Printer
Nadgorny, M., Xiao, Z., Chen, C., & Connal, L. A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07388 · Cited by 234
Self-citationA Review of 3D Printing Technology in Pharmaceutics: Technology and Applications, Now and Future
Wang, S., Chen, X., Han, X., Hong, X., Li, X., Zhang, H., Li, M., Wang, Z., & Zheng, A. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15020416 · Cited by 210
“In contrast to the traditional manufacturing techniques of “subtractive manufacturing”, 3D printing is an “additive manufacturing” technology, where a model is constructed using computer-aided design software, sliced, and transferred to a printer, and the 3D product is then constructed layer by layer using the princip…”
MethodSalentijn, G. I., Oomen, P. E., Grajewski, M., & Verpoorte, E. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b00828 · Cited by 225
The Emerging Frontiers and Applications of High-Resolution 3D Printing
Mao, M., He, J., Li, X., Zhang, B., Lei, Q., Liu, Y., & Li, D. (2017) · Micromachines · doi:10.3390/mi8040113 · Cited by 224
“The advent of 3D printing has shown great promise to overcome all these challenges [103,104].”
BackgroundDe Santis, P., Meyer, L.-E., & Kara, S. (2020) · Reaction Chemistry & Engineering · doi:10.1039/d0re00335b · Cited by 219
Recent advances on 3D printing graphene-based composites
Guo, H., Lv, R., & Bai, S. (2019) · Nano Materials Science · doi:10.1016/j.nanoms.2019.03.003 · Cited by 218
How Additive Manufacturing Technology Changes Business Models? – Review of Literature
Savolainen, J., & Collan, M. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101070 · Cited by 223
Intravital three-dimensional bioprinting
Urciuolo, A., Poli, I., Brandolino, L., Raffa, P., Scattolini, V., Laterza, C., Giobbe, G. G., Zambaiti, E., Selmin, G., Magnussen, M., et al. (2020) · Nature Biomedical Engineering · doi:10.1038/s41551-020-0568-z · Cited by 218
“A variety of crosslinking strategies have been developed to form hydrogel structures in internal regions of tissues: (1) physical crosslinking, which includes ionic crosslinking and stimuli-responsive crosslinking (such as responses to temperature and pH change); (2) chemical crosslinking, which includes enzymatic, ra…”
BackgroundEarth, D. O. (2014) · International Linear Collider · Cited by 223
Chemical insights into bioinks for 3D printing
Valot, L., Martinez, J., Mehdi, A., & Subra, G. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00718c · Cited by 218
Roda, A., Michelini, E., Cevenini, L., Calabria, D., Calabretta, M. M., & Simoni, P. (2014) · Analytical Chemistry · doi:10.1021/ac502137s · Cited by 222
Thomas, N., Sreedhar, N., Al-Ketan, O., Rowshan, R., Abu Al-Rub, R. K., & Arafat, H. (2018) · Desalination · doi:10.1016/j.desal.2018.06.009 · Cited by 223
3D printing of versatile reactionware for chemical synthesis
Kitson, P. J., Glatzel, S., Chen, W., Lin, C.-G., Song, Y.-F., & Cronin, L. (2016) · Nature Protocols · doi:10.1038/nprot.2016.041 · Cited by 217
Helical 3D‐Printed Metal Electrodes as Custom‐Shaped 3D Platform for Electrochemical Devices
Ambrosi, A., Moo, J. G. S., & Pumera, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503902 · Cited by 214
Design and fabrication of porous biodegradable scaffolds: a strategy for tissue engineering
Raeisdasteh Hokmabad, V., Davaran, S., Ramazani, A., & Salehi, R. (2017) · Journal of Biomaterials Science, Polymer Edition · doi:10.1080/09205063.2017.1354674 · Cited by 217
“The main advantages of this technology are highly controllable porosity due to the laydown the pattern and good mechanical properties [168].”
BackgroundMethod3D printing for drug delivery and biomedical applications
Beg, S., Almalki, W. H., Malik, A., Farhan, M., Aatif, M., Rahman, Z., Alruwaili, N. K., Alrobaian, M., Tarique, M., & Rahman, M. (2020) · Drug Discovery Today · doi:10.1016/j.drudis.2020.07.007 · Cited by 215
Hu, J., Jiang, Y., Cui, S., Duan, Y., Liu, T., Guo, H., Lin, L., Lin, Y., Zheng, J., Amine, K., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600856 · Cited by 214
Elevated‐Temperature 3D Printing of Hybrid Solid‐State Electrolyte for Li‐Ion Batteries
Cheng, M., Jiang, Y., Yao, W., Yuan, Y., Deivanayagam, R., Foroozan, T., Huang, Z., Song, B., Rojaee, R., Shokuhfar, T., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800615 · Cited by 214
Gordeev, E. G., Galushko, A. S., & Ananikov, V. P. (2018) · PLOS ONE · doi:10.1371/journal.pone.0198370 · Cited by 208
Zhang, J., Yang, W., Vo, A. Q., Feng, X., Ye, X., Kim, D. W., & Repka, M. A. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.08.058 · Cited by 208
“3D printing is the layer-by-layer production of 3D objects from digital designs (Gross et al., 2014).”
Background3D bioprinting of liver-mimetic construct with alginate/cellulose nanocrystal hybrid bioink
Wu, Y., Lin, Z. Y. (., Wenger, A. C., Tam, K. C., & Tang, X. (. (2018) · Bioprinting · doi:10.1016/j.bprint.2017.12.001 · Cited by 207
Elastic properties of 3D printed fibre-reinforced structures
Al Abadi, H., Thai, H.-T., Paton-Cole, V., & Patel, V. I. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.03.051 · Cited by 208
Stimuli-responsive materials in additive manufacturing
Shafranek, R. T., Millik, S. C., Smith, P. T., Lee, C.-U., Boydston, A. J., & Nelson, A. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.002 · Cited by 210
3D printing of a wearable personalized oral delivery device: A first-in-human study
Liang, K., Carmone, S., Brambilla, D., & Leroux, J.-C. (2018) · Science Advances · doi:10.1126/sciadv.aat2544 · Cited by 205
Roda, A., Guardigli, M., Calabria, D., Calabretta, M. M., Cevenini, L., & Michelini, E. (2014) · The Analyst · doi:10.1039/c4an01612b · Cited by 205
Digitization of multistep organic synthesis in reactionware for on-demand pharmaceuticals
Kitson, P. J., Marie, G., Francoia, J.-P., Zalesskiy, S. S., Sigerson, R. C., Mathieson, J. S., & Cronin, L. (2018) · Science · doi:10.1126/science.aao3466 · Cited by 204
3D printing of nano-cellulosic biomaterials for medical applications
Sultan, S., Siqueira, G., Zimmermann, T., & Mathew, A. P. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.06.002 · Cited by 202
The clinical use of 3D printing in surgery
Pugliese, L., Marconi, S., Negrello, E., Mauri, V., Peri, A., Gallo, V., Auricchio, F., & Pietrabissa, A. (2018) · Updates in Surgery · doi:10.1007/s13304-018-0586-5 · Cited by 195
Recent progress in the fabrication techniques of 3D scaffolds for tissue engineering
Mabrouk, M., Beherei, H. H., & Das, D. B. (2020) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.110716 · Cited by 201
Sustainable Materials and Chemical Processes for Additive Manufacturing
Sanchez-Rexach, E., Johnston, T. G., Jehanno, C., Sardon, H., & Nelson, A. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02008 · Cited by 196
Designing with Light: Advanced 2D, 3D, and 4D Materials
Jung, K., Corrigan, N., Ciftci, M., Xu, J., Seo, S. E., Hawker, C. J., & Boyer, C. (2020) · Advanced Materials · doi:10.1002/adma.201903850 · Cited by 194
Liquid Transfer in Printing Processes: Liquid Bridges with Moving Contact Lines
Kumar, S. (2015) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-010814-014620 · Cited by 195
A rapid and intelligent designing technique for patient-specific and 3D-printed orthopedic cast
Lin, H., Shi, L., & Wang, D. (2016) · 3D Printing in Medicine · doi:10.1186/s41205-016-0007-7 · Cited by 192
Sreenilayam, S. P., Ul Ahad, I., Nicolosi, V., & Brabazon, D. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.025 · Cited by 192
Toward the design of functional foods and biobased products by 3D printing: A review
Portanguen, S., Tournayre, P., Sicard, J., Astruc, T., & Mirade, P.-S. (2019) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2019.02.023 · Cited by 193
A Review of Metal Additive Manufacturing Technologies
Yakout, M., Elbestawi, M. A., & Veldhuis, S. C. (2018) · Solid State Phenomena · doi:10.4028/www.scientific.net/ssp.278.1 · Cited by 189
Wu, Q., Wei, J., Xu, B., Liu, X., Wang, H., Wang, W., Wang, Q., & Liu, W. (2017) · Scientific Reports · doi:10.1038/srep41566 · Cited by 192
Hannibal, M., & Knight, G. (2018) · International Business Review · doi:10.1016/j.ibusrev.2018.04.003 · Cited by 191
Rheology as a tool for evaluation of melt processability of innovative dosage forms
Aho, J., Boetker, J. P., Baldursdottir, S., & Rantanen, J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.02.009 · Cited by 191
Chen, K., Yu, L., Cui, Y., Jia, M., & Pan, K. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2021.107717 · Cited by 182
Clinical Application of Three-Dimensional Printing Technology in Craniofacial Plastic Surgery
Choi, J. W., & Kim, N. (2015) · Archives of Plastic Surgery · doi:10.5999/aps.2015.42.3.267 · Cited by 184
“Although 3D printing with tactile rapid prototype (RP) models was developed in the 1980s, this technique is being revisited due to its value and efficacy [3-5].”
Method3D Printing in Medicine for Preoperative Surgical Planning: A Review
Tejo-Otero, A., Buj-Corral, I., & Fenollosa-Artés, F. (2020) · Annals of Biomedical Engineering · doi:10.1007/s10439-019-02411-0 · Cited by 181
3D printed molds for non-planar PDMS microfluidic channels
Hwang, Y., Paydar, O. H., & Candler, R. N. (2015) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2015.02.028 · Cited by 187
Review of 4D printing materials and their properties
Shin, D.-G., Kim, T.-H., & Kim, D.-E. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0040-z · Cited by 183
Porous bone tissue scaffold concept based on shape memory PLA/Fe3O4
Zhao, W., Huang, Z., Liu, L., Wang, W., Leng, J., & Liu, Y. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108563 · Cited by 178
3D Printing of Textiles: Potential Roadmap to Printing with Fibers
Chatterjee, K., & Ghosh, T. K. (2020) · Advanced Materials · doi:10.1002/adma.201902086 · Cited by 180
Nanoformulations in Pharmaceutical and Biomedical Applications: Green Perspectives
Petrovic, S., Bita, B., & Barbinta-Patrascu, M.-E. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25115842 · Cited by 168
Bioprinting functional tissues
Leberfinger, A. N., Dinda, S., Wu, Y., Koduru, S. V., Ozbolat, V., Ravnic, D. J., & Ozbolat, I. T. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.009 · Cited by 180
Return on investment for open source scientific hardware development
Pearce, J. M. (2016) · Science and Public Policy · doi:10.1093/scipol/scv034 · Cited by 172
Kim, H. W., Bae, H., & Park, H. J. (2017) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.07.017 · Cited by 169
3D-printing and the effect on medical costs: a new era?
Choonara, Y. E., du Toit, L. C., Kumar, P., Kondiah, P. P. D., & Pillay, V. (2016) · Expert Review of Pharmacoeconomics & Outcomes Research · doi:10.1586/14737167.2016.1138860 · Cited by 174
“Further examples of cost advantages include the surgical planning of plaque removal using a 3D-printed model of a calcified aorta [3,9].”
BackgroundMethodInfluentialDesign, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Aerosol processing: a wind of innovation in the field of advanced heterogeneous catalysts
Debecker, D. P., Le Bras, S., Boissière, C., Chaumonnot, A., & Sanchez, C. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00697g · Cited by 173
Screw extrusion-based additive manufacturing of PEEK
Tseng, J.-W., Liu, C.-Y., Yen, Y.-K., Belkner, J., Bremicker, T., Liu, B. H., Sun, T.-J., & Wang, A.-B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.032 · Cited by 177
Pal, A. K., Mohanty, A. K., & Misra, M. (2021) · RSC Advances · doi:10.1039/d1ra04060j · Cited by 169
Clinical Applications of 3D Printing
Ballard, D. H., Trace, A. P., Ali, S., Hodgdon, T., Zygmont, M. E., DeBenedectis, C. M., Smith, S. E., Richardson, M. L., Patel, M. J., Decker, S. J., et al. (2018) · Academic Radiology · doi:10.1016/j.acra.2017.08.004 · Cited by 170
3D-printed supercapacitor-powered electrochemiluminescent protein immunoarray
Kadimisetty, K., Mosa, I. M., Malla, S., Satterwhite-Warden, J. E., Kuhns, T. M., Faria, R. C., Lee, N. H., & Rusling, J. F. (2016) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2015.09.017 · Cited by 172
“The recent emergence of inexpensive 3D printers offers revolutionary low cost options for designing and constructing biosensor systems (Gross et al., 2014).”
BackgroundThree-dimensional printing: technologies, applications, and limitations in neurosurgery
Pucci, J. U., Christophe, B. R., Sisti, J. A., & Connolly, E. S. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2017.05.007 · Cited by 168
Leist, S. K., Gao, D., Chiou, R., & Zhou, J. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1341815 · Cited by 173
Three‐Dimensional Printing and Its Applications in Otorhinolaryngology–Head and Neck Surgery
Crafts, T. D., Ellsperman, S. E., Wannemuehler, T. J., Bellicchi, T. D., Shipchandler, T. Z., & Mantravadi, A. V. (2017) · Otolaryngology–Head and Neck Surgery · doi:10.1177/0194599816678372 · Cited by 170
“Several CAD programs allow users to render 3D models and export them as files that are compatible with 3D printers.(1) One of the most common types is the ‘‘.”
BackgroundMethodInfluentialPeng, S., Li, Y., Wu, L., Zhong, J., Weng, Z., Zheng, L., Yang, Z., & Miao, J.-T. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b20631 · Cited by 174
3D printed anisotropic dielectric composite with meta-material features
Isakov, D. V., Lei, Q., Castles, F., Stevens, C. J., Grovenor, C. R. M., & Grant, P. S. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.176 · Cited by 167
3D Printing‐Based Hydrogel Dressings for Wound Healing
Zhou, X., Yu, X., You, T., Zhao, B., Dong, L., Huang, C., Zhou, X., Xing, M. M. Q., Qian, W., & Luo, G. (2024) · Advanced Science · doi:10.1002/advs.202404580 · Cited by 198
Photopolymer Resins with Biobased Methacrylates Based on Soybean Oil for Stereolithography
Guit, J., Tavares, M. B. L., Hul, J., Ye, C., Loos, K., Jager, J., Folkersma, R., & Voet, V. S. D. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b01143 · Cited by 166
Mechanics of shape distortion of DLP 3D printed structures during UV post-curing
Wu, D., Zhao, Z., Zhang, Q., Qi, H. J., & Fang, D. (2019) · Soft Matter · doi:10.1039/c9sm00725c · Cited by 160
Su, W., Cook, B. S., Fang, Y., & Tentzeris, M. M. (2016) · Scientific Reports · doi:10.1038/srep35111 · Cited by 162
Brune, K. D., & Howarth, M. (2018) · Frontiers in Immunology · doi:10.3389/fimmu.2018.01432 · Cited by 161
Production of Materials with Spatially-Controlled Cross-Link Density via Vat Photopolymerization
Peterson, G. I., Schwartz, J. J., Zhang, D., Weiss, B. M., Ganter, M. A., Storti, D. W., & Boydston, A. J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09768 · Cited by 159
dos Santos, P. L., Katic, V., Loureiro, H. C., dos Santos, M. F., dos Santos, D. P., Formiga, A. L. B., & Bonacin, J. A. (2019) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2018.11.013 · Cited by 163
Current and emerging trends in polymeric 3D printed microfluidic devices
Gonzalez, G., Roppolo, I., Pirri, C. F., & Chiappone, A. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102867 · Cited by 160
Toward Biomimetic Scaffolds for Tissue Engineering: 3D Printing Techniques in Regenerative Medicine
Chung, J. J., Im, H.-J., Kim, S. H., Park, J. W., & Jung, Y. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.586406 · Cited by 172
“…materials are limited to liquid resins, which can be toxic Rimell and Marquis, 2000; Leong et al., 2003; Tsang and Bhatia, 2004; Jiankang et al., 2009; Melchels et al., 2010; Gross et al., 2014; Melchiorri et al., 2016 SLS Powdered materials are sintered through a similar process as SLA.”
BackgroundMethodInfluentialWang, K., Ho, C., Zhang, C., & Wang, B. (2017) · Engineering · doi:10.1016/j.eng.2017.05.013 · Cited by 173
“One unique use of 3D printing technology is for the fabrication of “phantoms,” or mock-ups of body parts, to allow doctors or surgeons to visualize body parts when preparing, planning, or optimizing complex medical operations or procedures [5,6].”
BackgroundAdvances in three-dimensional rapid prototyping of microfluidic devices for biological applications
O’Neill, P., Azouz, A. B., Vázquez, M., Liu, J., Marczak, S. P., Slouka, Z., Chang, H., Diamond, D., & Brabazon, D. (2014) · Biomicrofluidics · doi:10.1063/1.4898632 · Cited by 174
Modifying release characteristics from 3D printed drug-eluting products
Boetker, J. P., Water, J. J., Aho, J., Arnfast, L., Bohr, A., & Rantanen, J. (2016) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2016.03.013 · Cited by 158
A review of 3D-printed sensors
Ni, Y., Ji, R., Long, K., Bu, T., Chen, K., & Zhuang, S. (2017) · Applied Spectroscopy Reviews · doi:10.1080/05704928.2017.1287082 · Cited by 165
Velu, R., Calais, T., Jayakumar, A., & Raspall, F. (2019) · Materials · doi:10.3390/ma13010092 · Cited by 161
“Initially used for visualization and diagnosis purposes, 3D imaging data has been combined with AM to build medical models adapted to the patient’s morphology [90,91].”
MethodAdvances in 3D Printing for Tissue Engineering
Zaszczyńska, A., Moczulska-Heljak, M., Gradys, A., & Sajkiewicz, P. (2021) · Materials · doi:10.3390/ma14123149 · Cited by 169
“Extrusion-based methods • pharmaceuticals [76,77] • scaffold manufacturing [78] • bone tissue engineering [79] • cardiovascular medical devices [80] - low cytotoxicity - low cost [81] - inexpensive printers - only thermoplastics materials [82] - low resolution [81] - non-biodegradable materials can be used - post-proc…”
BackgroundSpatially and optically tailored 3D printing for highly miniaturized and integrated microfluidics
Noriega, J. L. S., Chartrand, N., Valdoz, J. C., Cribbs, C. G., Jacobs, D. A., Poulson, P. D., Viglione, M., Woolley, A. T., Ry, P. M. V., Christensen, K., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-25788-w · Cited by 156
Gioiello, A., Piccinno, A., Lozza, A. M., & Cerra, B. (2020) · Journal of Medicinal Chemistry · doi:10.1021/acs.jmedchem.9b01956 · Cited by 150
Towards the generalized iterative synthesis of small molecules
Lehmann, J. W., Blair, D. J., & Burke, M. D. (2018) · Nature Reviews Chemistry · doi:10.1038/s41570-018-0115 · Cited by 164
Aho, J., Boetker, J. P., Genina, N., Edinger, M., Arnfast, L., & Rantanen, J. (2018) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2018.11.012 · Cited by 172
Chadha, U., Abrol, A., Vora, N. P., Tiwari, A., Shanker, S. K., & Selvaraj, S. K. (2022) · Progress in Additive Manufacturing · doi:10.1007/s40964-021-00257-4 · Cited by 160
“It is also possible to print bionic ears and live-scale models for planning operations or simulate an artificial environment [34, 35].”
BackgroundBishop, G. W., Satterwhite, J. E., Bhakta, S., Kadimisetty, K., Gillette, K. M., Chen, E., & Rusling, J. F. (2015) · Analytical Chemistry · doi:10.1021/acs.analchem.5b00903 · Cited by 147
A Versatile 3D and 4D Printing System through Photocontrolled RAFT Polymerization
Zhang, Z., Corrigan, N. A., Bagheri, A., Jin, J., & Boyer, C. A. (2019) · Angewandte Chemie · doi:10.1002/ange.201912608 · Cited by 150
Comparison in Terms of Accuracy between DLP and LCD Printing Technology for Dental Model Printing
Tsolakis, I. A., Papaioannou, W., Papadopoulou, E., Dalampira, M., & Tsolakis, A. I. (2022) · Dentistry Journal · doi:10.3390/dj10100181 · Cited by 153
In situ monitoring for fused filament fabrication process: A review
Fu, Y., Downey, A. R. J., Yuan, L., Pratt, A., & Balogun, Y. A. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101749 · Cited by 181
“FFF has been utilized for various applications, including biomedical [7], civil [8], and medical [9,10], in addition to”
Method3D printing of polymer composites to fabricate wearable sensors: A comprehensive review
Osman, A., & Lü, J. (2023) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2023.100734 · Cited by 158
Applications of 3D printing technologies in oceanography
Mohammed, J. S. (2016) · Methods in Oceanography · doi:10.1016/j.mio.2016.08.001 · Cited by 160
Three-Dimensional-Printing of Bio-Inspired Composites
Gu, G. X., Su, I., Sharma, S., Voros, J. L., Qin, Z., & Buehler, M. J. (2016) · Journal of Biomechanical Engineering · doi:10.1115/1.4032423 · Cited by 157
“However, printers that use pressure are not as accessible as printers that use heat for extrusion, which limits the materials that can be used [8,80].”
Minnema, J., van Eijnatten, M. A. J. M., Kouw, W. M., Diblen, F., Mendrik, A. M., & Wolff, J. (2018) · Computers in Biology and Medicine · doi:10.1016/j.compbiomed.2018.10.012 · Cited by 161
Wirth, D. M., Sheaff, M. J., Waldman, J. V., Symcox, M. P., Whitehead, H. D., Sharp, J. D., Doerfler, J. R., Lamar, A. A., & LeBlanc, G. (2019) · Analytical Chemistry · doi:10.1021/acs.analchem.9b01331 · Cited by 142
Kalsoom, U., Peristyy, A. A., Nesterenko, P. N., & Paull, B. (2016) · RSC Advances · doi:10.1039/c6ra05261d · Cited by 141
Recent trends and developments in dissolving pulp production and application
Kumar, H., & Christopher, L. P. (2017) · Cellulose · doi:10.1007/s10570-017-1285-y · Cited by 155
Recent advances in 3D printing of nanocellulose: structure, preparation, and application prospects
Ee, L. Y., & Li, S. F. Y. (2021) · Nanoscale Advances · doi:10.1039/d0na00408a · Cited by 154
Metadata
- Authors
- Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Spence, Dana M.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-30
- Volume
- 86
- Issue
- 7
- Pages
- 3240-3253
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2043704558
- Cited by
- 1,746
- References
- 162
- Citations by year
- 2026: 58 · 2025: 93 · 2024: 130 · 2023: 141 · 2022: 152 · 2021: 154 · 2020: 167 · 2019: 187 · 2018: 224 · 2017: 192 · 2016: 141 · 2015: 83 · 2014: 23
- Type
- other
- Language
- en
- Open access
- closed
- Locations
- Analytical Chemistry (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Social Sciences › Education › Various Chemistry Research Topics
- Keywords
- 3D printing, additive manufacturing, biotechnology, chemical sciences, laboratory applications, printing technology, history of 3D printing, research laboratories, teaching laboratory
- MeSH terms
- Biotechnology, Chemistry, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.