Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
The DOI matches its Crossref record; 148 of the 162 references it cites were found in a registry or an index.
Abstract
Nearing 30 years since its introduction, 3D printing technology is set to revolutionize research and teaching laboratories. This feature encompasses the history of 3D printing, reviews various printing methods, and presents current applications. The authors offer an appraisal of the future direction and impact this technology will have on laboratory settings as 3D printers become more accessible.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Patterning proteins and cells using soft lithography
Kane, R. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00165-9 · Cited by 1,490
Engineering cell shape and function
Singhvi, R., Kumar, A., Lopez, G. P., Stephanopoulos, G. N., Wang, D. I. C., Whitesides, G. M., & Ingber, D. E. (1994) · Science · doi:10.1126/science.8171320 · Cited by 1,453
Research works printed but not linked: 21
- Leukers B., 2005, J. Mater. Sci.: Mater. Med., 16, 1121
- Lipton, J.; Arnold, D.; Nigl, F.; Lopez, N.; Cohen, D.; Noren, N.; Lipson, H.InSolid Freeform Fabrication Symposium, 2010.
- Campbell J., 2005, J. Text. Apparel, Technol. Manage., 4, 1
- Pan, Y.; Zhou, C.; Chen, Y.InProceedings of the 2012 International Manufacturing Science and Engineering Conference, 2012; pp4–8.
- Takagi, T.; Nakajima, N.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp173–178.
- Ikuta, K.; Hirowatari, K.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp42–47.
- Strutt J. W., 1879, Tr. Mat. O-va, 4
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Landers R., 2002, J. Mater. Sci., 37, 3107, 10.1023/A:1016189724389 · DOI · Paper page
- Kruth, J.P.; Levy, G.; Schindel, R.; Craeghs, T.; Yasa, E.InProceedings of the 3rd International Conference on Polymers and Moulds Innovations, 2008; pp15–30;
- Van Weeren, R.; Agarwala, M.; Jamalabad, V.; Bandyophadyay, A.; Vaidyanathan, R.; Langrana, N.; Safari, A.; Whalen, P.; Danforth, S.; Ballard, C.InProceedings of the Solid Freeform Fabrication Symposium;ASME:New York, 1995; pp314–321.
- Agarwala, M.; Van Weeren, R.; Bandyopadhyay, A.; Whalen, P.; Safari, A.; Danforth, S.InProceedings of Solid Freeform Fabrication Symposium, The University of Texas, Austin, TX, August 12–14, 1996; pp385–392.
- Frank, M. C.; Peters, F. E.; Karthikeyan, R.24th Annual International Solid Freeform Fabrication Symposium–An Additive Manufacturing Conference, The University of Texas at Austin, Austin, TX, 2010.
- Flach, L.; Jacobs, M. A.; Klosterman, D. A.; Chartoff, R.InSolid Freeform Fabrication Symposium Proceedings, University of Texas at Austin, Austin, TX, 1998; pp407–416.
- Leukers B., 2005, Mater. Sci. Eng. Technol., 36, 781
- Mironov V., 2003, Trends Biotechnol., 21, 151, 10.1016/S0167-7799(03)00033-7 · DOI · Paper page
- Tam M. D., 2012, Radiol. Case, 6, 31
- Klepacek I., 2012, Forensic Sci. Med. Pathol., 8, 451
- Noecker A. M., 2006, Pediatr. Circ. Support Perfusion, 52, 349
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Mathieson J. S., 2013, Beilstein J. Org. Chem., 4, 285
Cited by
Items 401–500 of 1,001
A comprehensive review of FDM printing in sensor applications: Advancements and future perspectives
Kumar, S., Singh, H., Singh, I., Bharti, S., Kumar, D., Siebert, G., & Koloor, S. S. R. (2024) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2024.01.030 · Cited by 72
Evaluation of commercially available polylactic acid (PLA) filaments for 3D printing applications
Matos, B. D. M., Júnior, V. V. R., da Silva, E. J., Moro, F. H., Bottene, A. C., Ribeiro, C. A., Dias, D. D. S., Antônio, S. G., Amaral, A. C., Cruz, S. A., et al. (2018) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-018-7967-3 · Cited by 82
Potential occupational hazards of additive manufacturing
Roth, G. A., Geraci, C. L., Stefaniak, A. B., Murashov, V. V., & Howard, J. (2019) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459624.2019.1591627 · Cited by 72
Open-Source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics
Pearce, J. M., Anzalone, N. C., & Heldt, C. L. (2016) · SLAS TECHNOLOGY · doi:10.1177/2211068215624408 · Cited by 73
Preparation of monolithic catalysts using 3D printed templates for oxidative coupling of methane
Michorczyk, P., Hędrzak, E., & Węgrzyniak, A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08629b · Cited by 71
Improved asymmetrical honeycomb monolith catalyst prepared using a 3D printed template
Davó‐Quiñonero, A., Sorolla‐Rosario, D., Bailón‐García, E., Lozano‐Castelló, D., & Bueno‐López, A. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.01.092 · Cited by 71
Nazeer, M. A., Önder, Ö. C., Sevgili, I., Yılgör, E., Kavaklı, İ. H., & Yılgör, İ. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101515 · Cited by 73
Rosa, R. P., & Rosace, G. (2021) · Macromolecular Materials and Engineering · doi:10.1002/mame.202100345 · Cited by 77
Silva‐Neto, H. A., Santhiago, M., Duarte, L. C., & Coltro, W. K. T. (2021) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2021.130721 · Cited by 72
3D Printing of Green and Renewable Polymeric Materials: Toward Greener Additive Manufacturing
Guggenbiller, G., Brooks, S. L., King, O., Constant, E., Merckle, D., & Weems, A. C. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c02171 · Cited by 73
Pietrabissa, A., Marconi, S., Peri, A., Pugliese, L., Cavazzi, E., Vinci, A., Botti, M., & Auricchio, F. (2015) · Surgical Endoscopy · doi:10.1007/s00464-015-4185-y · Cited by 71
“In recent years, 3-D printing technology, also known as additive manufacturing, has been increasingly used by industries from aerospace and consumer electronics to biological applications [18].”
BackgroundAdding Biomolecular Recognition Capability to 3D Printed Objects
Mandon, C. A., Blum, L. J., & Marquette, C. A. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.6b03426 · Cited by 79
Olsson, A., Hellsing, M. S., & Rennie, A. R. (2017) · Physica Scripta · doi:10.1088/1402-4896/aa694e · Cited by 70
“concerns the study of the printing process and the development of the manufacturing technique [14].”
BackgroundBioprinting for Liver Transplantation
Kryou, C., Leva, C. V., Chatzipetrou, M., & Zergioti, I. (2019) · Bioengineering · doi:10.3390/bioengineering6040095 · Cited by 77
“to print nonviable materials, such as plastics and metals [22].”
BackgroundUllah, M., Wahab, A., Khan, S. U., Naeem, M., Rehman, K. U., Ali, H. H. M., Ullah, A., Khan, A., Khan, N. R., Rizg, W. Y., et al. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112240 · Cited by 79
Recent advances in 3D printing of biodegradable metals for orthopaedic applications
Liang, W., Zhou, C., Zhang, H., Bai, J., Jiang, B., Jiang, C., Ming, W., Zhang, H., Long, H., Huang, X., et al. (2023) · Journal of Biological Engineering · doi:10.1186/s13036-023-00371-7 · Cited by 77
“Its use extends to orthopedic as well as dental implants, cardiovascular systems, and bioartificial livers [20].”
BackgroundSlavković, V., Hanželič, B., Plesec, V., Milenković, S., & Harih, G. (2024) · Polymers · doi:10.3390/polym16111526 · Cited by 82
“The use of PLA in additive manufacturing enables the production of complex biomedical devices based on computer-aided design and construction (CAD); in particular, with the use of patient-specific anatomical data, it leads to the creation of one-of-a-kind implants [36] and prosthesis sockets [37].”
Ceh, J., Youd, T., Mastrovich, Z., Peterson, C., Khan, S., Sasser, T. A., Sander, I. M., Doney, J., Turner, C., & Leevy, W. M. (2017) · Sensors · doi:10.3390/s17030459 · Cited by 70
“These machines can now synthesize objects using a range of input materials including polymers [6], metals [7], and ceramics [8], while recent innovations have even used this technology for tissue engineering applications [9,10].”
BackgroundLi, S., Xu, Y., Yu, J., & Becker, M. L. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.038 · Cited by 70
Ketel, S., Falzone, G., Wang, B., Washburn, N. R., & Sant, G. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.022 · Cited by 74
The Current Role of Three-Dimensional (3D) Printing in Plastic Surgery
Kamali, P., Dean, D., Skoracki, R. J., Koolen, P. G. L., Paul, M. A., Ibrahim, A. M., & Lin, S. J. (2016) · Plastic & Reconstructive Surgery · doi:10.1097/prs.0000000000000150 · Cited by 69
“Among its potential medical applications, 3D technology may also be used in information sharing among physicians and researchers.(3) The National Institute of Health and Human Services has recently launched a public 3D library to promote open-source”
BackgroundMethodInfluential3D Printing for veterinary anatomy: An overview
Wilhite, R., & Wölfel, I. (2019) · Anatomia Histologia Embryologia · doi:10.1111/ahe.12502 · Cited by 69
Bakhtiari, S. S. E., Bakhsheshi‐Rad, H. R., Karbasi, S., Razzaghi, M., Tavakoli, M., Ismail, A. F., Sharif, S., Ramakrishna, S., Chen, D., & Berto, F. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100477 · Cited by 70
Stimuli-responsive materials for 4D Printing: Mechanical, Manufacturing, and Biomedical Applications
Kumar, P., Suryavanshi, P., Dwivedy, S. K., & Banerjee, S. (2024) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2024.125553 · Cited by 77
Smartphones as a platform for molecular analysis: concepts, methods, devices and future potential
Baker, D. V., Bernal-Escalante, J., Traaseth, C., Wang, Y., Tran, M. V., Keenan, S., & Algar, W. R. (2025) · Lab on a Chip · doi:10.1039/d4lc00966e · Cited by 84
Mahmoud, A., & Bennett, M. (2015) · Archives of Pathology & Laboratory Medicine · doi:10.5858/arpa.2014-0408-oa · Cited by 69
Fluorescence Detector for Capillary Separations Fabricated by 3D Printing
Prikryl, J., & Foret, F. (2014) · Analytical Chemistry · doi:10.1021/ac503678n · Cited by 69
Huang, L., Wang, L., He, J., Zhao, J., Zhong, D., Yang, G., Guo, T., Yan, X., Zhang, L., Li, D., et al. (2016) · Journal of Thoracic Disease · doi:10.21037/jtd.2016.10.53 · Cited by 69
“Three-dimensional printing (3DP) arose from the automotive and aerospace industry in the 1980s and has subsequently been applied to customization of medical devices (10).”
MethodTerahertz Dielectric Property Characterization of Photopolymers for Additive Manufacturing
Duangrit, N., Hong, B., Burnett, A. D., Akkaraekthalin, P., Robertson, I. D., & Somjit, N. (2019) · IEEE Access · doi:10.1109/access.2019.2893196 · Cited by 71
“Nevertheless, there are very limited material choices of microparticle powders commercially available for the SLS technique [19], [20], restricting”
MethodPersonalized 3D printed ciprofloxacin impregnated meshes for the management of hernia
Qamar, N., Abbas, N. A., Irfan, M., Hussain, A., Arshad, M. S., Latif, S., Mehmood, F., & Ghori, M. U. (2019) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2019.101164 · Cited by 71
“To the best of our knowledge, this is the first comprehensive study of developing plain and drug loaded hernial meshes using FDM.”
InfluentialCustomisable 3D printed microfluidics for integrated analysis and optimisation
Monaghan, T., Harding, M. J., Harris, R. A., Friel, R. J., & Christie, S. D. R. (2016) · Lab on a Chip · doi:10.1039/c6lc00562d · Cited by 74
3D Printing in Heterogeneous Catalysis—The State of the Art
Bogdan, E., & Michorczyk, P. (2020) · Materials · doi:10.3390/ma13204534 · Cited by 77
“The 3D printer firmware interprets the data taken from one or more STL files to enable their preview and editing, which includes resizing, repositioning, reorientation, addition of supports; this affects the accuracy of the printed object, its surface finish, and the time to build and finish the object [1,13,16,17].”
Method3D Printing Aids Acetabular Reconstruction in Complex Revision Hip Arthroplasty
Hughes, A. J., DeBuitleir, C., Soden, P., O’Donnchadha, B., Tansey, A., Abdulkarim, A. N., McMahon, C. J., & Hurson, C. J. (2017) · Advances in Orthopedics · doi:10.1155/2017/8925050 · Cited by 68
Extrusion-Based 3D Printing for Pharmaceuticals: Contemporary Research and Applications
Algahtani, M. S., Mohammed, A. A., & Ahmad, J. (2019) · Current Pharmaceutical Design · doi:10.2174/1381612825666190110155931 · Cited by 70
3‐D Printing and Development of Fluoropolymer Based Reactive Inks
Ruz-Nuglo, F., & Groven, L. J. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700390 · Cited by 68
Formulation strategies for solid oral dosage form using 3D printing technology: A mini-review
Khatri, P., Shah, M. K., & Vora, N. (2018) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2018.05.009 · Cited by 66
Mechanical behavior of FRP sheets reinforced 3D elements printed with cementitious materials
Feng, P., Meng, X., & Zhang, H. (2015) · Composite Structures · doi:10.1016/j.compstruct.2015.08.079 · Cited by 68
Mobbs, R. J., Parr, W. C., Choy, W. J., McEvoy, A., Walsh, W. R., & Phan, K. H. (2019) · World Neurosurgery · doi:10.1016/j.wneu.2018.12.144 · Cited by 67
Barthels, F., Barthels, U., Schwickert, M., & Schirmeister, T. (2019) · SLAS TECHNOLOGY · doi:10.1177/2472630319877374 · Cited by 68
“3D printers operate by melting a filament of plastic, such as polyethylene terephthalate glycol-modified (PETG), at the heated nozzle to build a 3D object in layers.(9) By now, most midrange 3D printers cost a few hundred dollars, with marginal operating expenses of about $30/kg printed material.”
BackgroundSelf-Healing Mechanisms for 3D-Printed Polymeric Structures: From Lab to Reality
Almutairi, M. D., Aria, A. I., Thakur, V. K., & Khan, M. (2020) · Polymers · doi:10.3390/polym12071534 · Cited by 68
Mendes‐Felipe, C., Patrocinio, D., Laza, J. M., Ruiz‐Rubio, L., & Vilas‐Vilela, J. L. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.10.018 · Cited by 66
3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy
Cho, H., Jammalamadaka, U. M., Tappa, K. K., Egbulefu, C., Prior, J. L., Tang, R., & Achilefu, S. A. (2019) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.8b00836 · Cited by 64
Recent Developments in 3D Printing of Droplet-Based Microfluidics
Aladese, A. D., & Jeong, H. (2021) · BioChip Journal · doi:10.1007/s13206-021-00032-1 · Cited by 65
Ahmed, I., Sullivan, K., & Priye, A. (2022) · Biosensors · doi:10.3390/bios12080652 · Cited by 78
“However, the adoption of 3D printing in the microfluidic research community is slow due to the lack of resolution and versatility constraints imposed by these systems [31,32].”
BackgroundShmueli, Y., Jiang, J., Zhou, Y., Xue, Y., Chang, C., Yuan, G., Satija, S. K., Lee, S., Nam, C., Kim, T., et al. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00328 · Cited by 64
Suvanasuthi, R., Chimnaronk, S., & Promptmas, C. (2021) · Talanta · doi:10.1016/j.talanta.2021.122962 · Cited by 63
Yin, Y., Wang, J., Huang, Q., Xu, S., Shuai, S., Hu, T., Xuan, W., Yin, S., Chen, C., & Ren, Z. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.03.221 · Cited by 63
Self-citationSmart pH-Responsive Antimicrobial Hydrogel Scaffolds Prepared by Additive Manufacturing
García, C., Gallardo, A., López, D., Elvira, C., Azzahti, A., López‐Martínez, E., Cortajarena, A. L., González-Henríquez, C. M., Sarabia‐Vallejos, M. A., & Rodríguez‐Hernández, J. (2018) · ACS Applied Bio Materials · doi:10.1021/acsabm.8b00297 · Cited by 65
Gonzalez, G. A., Chiappone, A., Dietliker, K., Pirri, C. F., & Roppolo, I. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000374 · Cited by 68
Phosphorescent bio-based resin for digital light processing (DLP) 3D-printing
Maturi, M., Pulignani, C., Locatelli, E., Buratti, V. V., Tortorella, S., Sambri, L., & Franchini, M. C. (2020) · Green Chemistry · doi:10.1039/d0gc01983f · Cited by 66
Graphitic carbon nitride nanotubes: a new material for emerging applications
Stroyuk, O. L., Raievska, O., & Zahn, D. R. T. (2020) · RSC Advances · doi:10.1039/d0ra05580h · Cited by 62
Review of 3D-Printed functionalized devices for chemical and biochemical analysis
Su, C. (2021) · Analytica Chimica Acta · doi:10.1016/j.aca.2021.338348 · Cited by 65
3D-printed bioanalytical devices
Bishop, G. W., Satterwhite-Warden, J. E., Kadimisetty, K., & Rusling, J. F. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/28/284002 · Cited by 65
“SLA was the first form of 3D printing that was invented and commercialized [2, 3].”
BackgroundMethodInfluentialLiao, Y., Li, H., Shu, R., Chen, H., Zhao, L., Song, Z., & Zhou, W. (2020) · Frontiers in Cellular and Infection Microbiology · doi:10.3389/fcimb.2020.00180 · Cited by 64
“Hydroxyapatite (HA) has been widely used in preclinical and clinical studies of tissue engineering and has components similar to those of natural bone (Gross et al., 2014; Inzana et al., 2014).”
BackgroundDirect Production of Microstructured Surfaces for Planar Chromatography Using 3D Printing
Macdonald, N. P., Currivan, S., Tedone, L., & Paull, B. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b04546 · Cited by 63
Fritschen, A., Bell, A. K., Königstein, I., Stühn, L., Stark, R. W., & Blaeser, A. (2022) · Biomaterials Science · doi:10.1039/d1bm01794b · Cited by 67
Bioengineering Cardiac Constructs using 3D Printing
Serpooshan, V., Mahmoudi, M., Hu, D. A., Hu, J. B., & Wu, S. M. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2016-0009 · Cited by 61
Osmar, the open-source microsyringe autosampler
Carvalho, M. C., & Murray, R. H. (2018) · HardwareX · doi:10.1016/j.ohx.2018.01.001 · Cited by 61
Stereolithographic 3D printing of extrinsically self-healing composites
Sanders, P., Young, A. J., Qin, Y., Fancey, K. S., Reithofer, M. R., Guillet‐Nicolas, R., Kleitz, F., Pamme, N., & Chin, J. M. (2019) · Scientific Reports · doi:10.1038/s41598-018-36828-9 · Cited by 65
Samper, I. C., Gowers, S. A. N., Rogers, M. L., Murray, D.-S. R. K., Jewell, S. L., Pahl, C., Strong, A. J., & Boutelle, M. G. (2019) · Lab on a Chip · doi:10.1039/c9lc00044e · Cited by 63
Mohammed, A. A., Algahtani, M. S., Ahmad, M. Z., & Ahmad, J. (2021) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2021.100008 · Cited by 60
Polymer‐based microfluidic devices: A comprehensive review on preparation and applications
Han, X., Zhang, Y., Tian, J., Wu, T., Li, Z., Xing, F., & Fu, S. (2021) · Polymer Engineering and Science · doi:10.1002/pen.25831 · Cited by 67
3D Printing/Interfacial Polymerization Coupling for the Fabrication of Conductive Hydrogel
Fantino, E., Roppolo, I., Zhang, D., Xiao, J., Chiappone, A., Castellino, M., Guo, Q., Pirri, C. F., & Yang, J. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700356 · Cited by 68
Stabilization strategies in extrusion-based 3D bioprinting for tissue engineering
Shapira, A., Noor, N., Asulin, M., & Dvir, T. (2018) · Applied Physics Reviews · doi:10.1063/1.5055659 · Cited by 58
Jiang, Y., Wu, J., Leng, J., Cardon, L., & Zhang, J. (2019) · Polymer · doi:10.1016/j.polymer.2019.121971 · Cited by 61
“cos [2]φ is the orientation factor and is defined as:”
Background3D printed microfluidic chip for multiple anticancer drug combinations
Chen, X., Chen, H., Wu, D., Chen, Q., Zhou, Z., Zhang, R., Peng, X., Su, Y.-C., & Sun, D. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.08.121 · Cited by 60
Clinical Applications of 3‐Dimensional Printing Technology in Hip Joint
Xia, R., Zhai, Z., Chang, Y., & Li, H. (2019) · Orthopaedic Surgery · doi:10.1111/os.12468 · Cited by 59
Klein, A., Yaron, T. M., Preter, E., Duadi, H., & Fridman, M. (2017) · Optica · doi:10.1364/optica.4.000502 · Cited by 58
Microchip-based electrochemical detection using a 3-D printed wall-jet electrode device
Munshi, A. S., & Martin, R. S. (2015) · The Analyst · doi:10.1039/c5an01956g · Cited by 58
3D printed LED based on-capillary detector housing with integrated slit
Cecil, F., Zhang, M., Guijt, R. M., Henderson, A. D., Nesterenko, P. N., Paull, B., Breadmore, M. C., & Macka, M. (2017) · Analytica Chimica Acta · doi:10.1016/j.aca.2017.02.020 · Cited by 58
Kwon, S., Kim, S., Kim, I., Hong, Y. K., & Na, S. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800500 · Cited by 61
Advancements in Metal Processing Additive Technologies: Selective Laser Melting (SLM)
Soni, N., Renna, G., & Leo, P. (2024) · Metals · doi:10.3390/met14091081 · Cited by 64
Gross, B. C., Anderson, K. B., Meisel, J. E., McNitt, M. I., & Spence, D. M. (2015) · Analytical Chemistry · doi:10.1021/acs.analchem.5b01202 · Cited by 57
Self-citationOpen-Source-Based 3D Printing of Thin Silica Gel Layers in Planar Chromatography
Fichou, D., & Morlock, G. E. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b04813 · Cited by 57
Penny, M. R., Cao, Z. J., Patel, B., Sil, B. C., Asquith, C. R. M., Szulc, B. R., Rao, Z. X., Muwaffak, Z., Malkinson, J. P., & Hilton, S. T. (2017) · Journal of Chemical Education · doi:10.1021/acs.jchemed.6b00953 · Cited by 57
Capturing PM2.5 Emissions from 3D Printing via Nanofiber-based Air Filter
Rao, C., Гу, Ф., Zhao, P., Sharmin, N., Gu, H., & Fu, J. (2017) · Scientific Reports · doi:10.1038/s41598-017-10995-7 · Cited by 61
“2 mm, (2) sealing surface angle below 45°, (3) sealing area above 3 mm2, and (4) three sealing layers.”
InfluentialLuan, C., Yao, X., Liu, C., Lan, L., & Fu, J. (2018) · Carbon · doi:10.1016/j.carbon.2018.08.019 · Cited by 57
Vat photopolymerization of charged monomers: 3D printing with supramolecular interactions
Wilts, E. M., Pekkanen, A. M., White, B. T., Meenakshisundaram, V., Aduba, D. C., Williams, C. B., & Long, T. E. (2019) · Polymer Chemistry · doi:10.1039/c8py01792a · Cited by 65
Open source laboratory sample rotator mixer and shaker
Dhankani, K. C., & Pearce, J. M. (2016) · HardwareX · doi:10.1016/j.ohx.2016.07.001 · Cited by 56
Selective Recovery of Gold from Electronic Waste Using 3D-Printed Scavenger
Lahtinen, E., Kivijärvi, L., Tatikonda, R., Vaisanen, A. O., Rissanen, K. T., & Haukka, M. (2017) · ACS Omega · doi:10.1021/acsomega.7b01215 · Cited by 63
Aman, Z. S., DePhillipo, N. N., Peebles, L. A., Familiari, F., LaPrade, R. F., & Dekker, T. J. (2022) · Arthroscopy The Journal of Arthroscopic and Related Surgery · doi:10.1016/j.arthro.2022.02.023 · Cited by 61
3D printing of compact electrochemical cell for sequential analysis of steroid hormones
Duarte, L. C., Baldo, T. A., Silva‐Neto, H. A., Figueredo, F., Janegitz, B. C., & Coltro, W. K. T. (2022) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2022.131850 · Cited by 55
Three Dimensional Printing and Its Applications Focusing on Microneedles for Drug Delivery
Al‐Nimry, S. S., & Daghmash, R. M. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15061597 · Cited by 62
Functional microfluidics: theory, microfabrication, and applications
Xie, M., Zhan, Z., Li, Y., Zhao, J., Zhang, C., Wang, Z., & Wang, Z. (2024) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ad2c5f · Cited by 70
Disposable electrochemical sensor prepared using 3D printing for cell and tissue diagnostics
Ragones, H., Schreiber, D. S., Inberg, A., Berkh, O., Kósa, G., Freeman, A., & Shacham‐Diamand, Y. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.04.065 · Cited by 55
Electrochemiluminescence at Bare and DNA-Coated Graphite Electrodes in 3D-Printed Fluidic Devices
Bishop, G. W., Satterwhite-Warden, J. E., Bist, I., Chen, E., & Rusling, J. F. (2015) · ACS Sensors · doi:10.1021/acssensors.5b00156 · Cited by 55
Gregory, T. S., Cheng, R., Tang, G., Mao, L., & Tse, Z. T. H. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504198 · Cited by 59
Louzao, I., Koch, B., Taresco, V., Ruiz‐Cantu, L., Irvine, D. J., Roberts, C. J., Tuck, C. J., Alexander, C., Hague, R., Wildman, R. D., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b15677 · Cited by 58
Development of New Hybrid Acrylic/Epoxy DLP-3D Printable Materials
Lantean, S., Roppolo, I., Sangermano, M., Pirri, C. F., & Chiappone, A. (2018) · Inventions · doi:10.3390/inventions3020029 · Cited by 57
“Three dimensional (3D) printing, which is also known as additive manufacturing, is a fabrication process that enables the layer-by-layer construction of 3D objects from computer-aided design (CAD) data [1].”
MethodMulti-source data analytics for AM energy consumption prediction
Qin, J., Liu, Y., & Grosvenor, R. I. (2018) · Advanced Engineering Informatics · doi:10.1016/j.aei.2018.10.008 · Cited by 59
“Moreover, SLM and SLS apply a similar technique.”
BackgroundMethodInfluentialParhi, R. (2021) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2021.102571 · Cited by 67
Three-Dimensional Printing Based Hybrid Manufacturing of Microfluidic Devices
Alapan, Y., Hasan, M. N., Shen, R., & Gurkan, U. A. (2015) · Journal of Nanotechnology in Engineering and Medicine · doi:10.1115/1.4031231 · Cited by 56
“Advanced additive manufacturing technologies, such as 3D printing, hold significant potential for single-step, stand-alone microfluidic device fabrication [10,11].”
BackgroundMethodSu, C., Yen, S.-C., Li, T.-W., & Sun, Y. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.6b00272 · Cited by 61
Embedding objects during 3D printing to add new functionalities
Yuen, P. K. (2016) · Biomicrofluidics · doi:10.1063/1.4958909 · Cited by 54
Sciancalepore, C., Moroni, F., Messori, M., & Bondioli, F. (2017) · Composites Communications · doi:10.1016/j.coco.2017.07.006 · Cited by 56
Additive Manufacturing, Cloud-Based 3D Printing and Associated Services—Overview
Baumann, F. W., & Roller, D. (2017) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp1020015 · Cited by 63
Femtosecond-Laser-Based 3D Printing for Tissue Engineering and Cell Biology Applications
Ho, C. M. B., Mishra, A., Hu, K., An, J., Kim, Y., & Yoon, Y. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00438 · Cited by 55
All 3D printed energy harvester for autonomous and sustainable resource utilization
Seol, M., Ivaškevičiūtė‐Povilauskienė, R., Ciappesoni, M., Thompson, F. V., Moon, D.-I., Kim, S. J., Kim, S. J., Han, J.-W., & Meyyappan, M. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.07.061 · Cited by 55
Hsu, C.-L., Chou, Y., Li, Y.-T., Chen, J.-E., Hung, C.-C., Wu, C., Shen, H., & Yeh, T. (2018) · International Orthopaedics · doi:10.1007/s00264-018-4111-8 · Cited by 54
Mansour, M. T., Tsongas, K., & Tzetzis, D. (2018) · Polymer-Plastics Technology and Materials · doi:10.1080/03602559.2018.1542730 · Cited by 67
Metadata
- Authors
- Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Spence, Dana M.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-30
- Volume
- 86
- Issue
- 7
- Pages
- 3240-3253
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2043704558
- Cited by
- 1,746
- References
- 162
- Citations by year
- 2026: 58 · 2025: 93 · 2024: 130 · 2023: 141 · 2022: 152 · 2021: 154 · 2020: 167 · 2019: 187 · 2018: 224 · 2017: 192 · 2016: 141 · 2015: 83 · 2014: 23
- Type
- other
- Language
- en
- Open access
- closed
- Locations
- Analytical Chemistry (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Social Sciences › Education › Various Chemistry Research Topics
- Keywords
- 3D printing, additive manufacturing, biotechnology, chemical sciences, laboratory applications, printing technology, history of 3D printing, research laboratories, teaching laboratory
- MeSH terms
- Biotechnology, Chemistry, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.