Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
The DOI matches its Crossref record; 148 of the 162 references it cites were found in a registry or an index.
Abstract
Nearing 30 years since its introduction, 3D printing technology is set to revolutionize research and teaching laboratories. This feature encompasses the history of 3D printing, reviews various printing methods, and presents current applications. The authors offer an appraisal of the future direction and impact this technology will have on laboratory settings as 3D printers become more accessible.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Patterning proteins and cells using soft lithography
Kane, R. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00165-9 · Cited by 1,490
Engineering cell shape and function
Singhvi, R., Kumar, A., Lopez, G. P., Stephanopoulos, G. N., Wang, D. I. C., Whitesides, G. M., & Ingber, D. E. (1994) · Science · doi:10.1126/science.8171320 · Cited by 1,453
Research works printed but not linked: 21
- Leukers B., 2005, J. Mater. Sci.: Mater. Med., 16, 1121
- Lipton, J.; Arnold, D.; Nigl, F.; Lopez, N.; Cohen, D.; Noren, N.; Lipson, H.InSolid Freeform Fabrication Symposium, 2010.
- Campbell J., 2005, J. Text. Apparel, Technol. Manage., 4, 1
- Pan, Y.; Zhou, C.; Chen, Y.InProceedings of the 2012 International Manufacturing Science and Engineering Conference, 2012; pp4–8.
- Takagi, T.; Nakajima, N.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp173–178.
- Ikuta, K.; Hirowatari, K.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp42–47.
- Strutt J. W., 1879, Tr. Mat. O-va, 4
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Landers R., 2002, J. Mater. Sci., 37, 3107, 10.1023/A:1016189724389 · DOI · Paper page
- Kruth, J.P.; Levy, G.; Schindel, R.; Craeghs, T.; Yasa, E.InProceedings of the 3rd International Conference on Polymers and Moulds Innovations, 2008; pp15–30;
- Van Weeren, R.; Agarwala, M.; Jamalabad, V.; Bandyophadyay, A.; Vaidyanathan, R.; Langrana, N.; Safari, A.; Whalen, P.; Danforth, S.; Ballard, C.InProceedings of the Solid Freeform Fabrication Symposium;ASME:New York, 1995; pp314–321.
- Agarwala, M.; Van Weeren, R.; Bandyopadhyay, A.; Whalen, P.; Safari, A.; Danforth, S.InProceedings of Solid Freeform Fabrication Symposium, The University of Texas, Austin, TX, August 12–14, 1996; pp385–392.
- Frank, M. C.; Peters, F. E.; Karthikeyan, R.24th Annual International Solid Freeform Fabrication Symposium–An Additive Manufacturing Conference, The University of Texas at Austin, Austin, TX, 2010.
- Flach, L.; Jacobs, M. A.; Klosterman, D. A.; Chartoff, R.InSolid Freeform Fabrication Symposium Proceedings, University of Texas at Austin, Austin, TX, 1998; pp407–416.
- Leukers B., 2005, Mater. Sci. Eng. Technol., 36, 781
- Mironov V., 2003, Trends Biotechnol., 21, 151, 10.1016/S0167-7799(03)00033-7 · DOI · Paper page
- Tam M. D., 2012, Radiol. Case, 6, 31
- Klepacek I., 2012, Forensic Sci. Med. Pathol., 8, 451
- Noecker A. M., 2006, Pediatr. Circ. Support Perfusion, 52, 349
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Mathieson J. S., 2013, Beilstein J. Org. Chem., 4, 285
Cited by
Items 501–600 of 1,001
Role of Polymers in 3D Printing Technology for Drug Delivery - An Overview
Jain, A., Bansal, K. K., Tiwari, A., Rosling, A., & Rosenholm, J. M. (2018) · Current Pharmaceutical Design · doi:10.2174/1381612825666181226160040 · Cited by 54
Bioinks for jet-based bioprinting
Zhou, D., Chen, J., Liu, B., Zhang, X., Li, X., & Xu, T. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00060 · Cited by 59
Calderilla, C., Maya, F., Cerdà, V., & Leal, L. O. (2017) · Talanta · doi:10.1016/j.talanta.2017.07.028 · Cited by 54
Soliman, A., AlAmoodi, N., Karanikolos, G. N., Doumanidis, C. C., & Polychronopoulou, K. (2020) · Nanomaterials · doi:10.3390/nano10112198 · Cited by 53
“It is known under several names in AM literature and practice, such as direct writing [74,75] and syringe extrusion printing [76].”
BackgroundSharma, V., Roozbahani, H., Alizadeh, M., & Handroos, H. (2021) · IEEE Access · doi:10.1109/access.2021.3071459 · Cited by 58
“As presented in Figure 8 [112], an ultraviolet (UV) laser is aimed at photopolymer resin to draw a pre-programmed design according to a computer design software like CAD.”
MethodThe Surface Quality Improvement Methods for FDM Printed Parts: A Review
Hashmi, A. W., Mali, H. S., & Meena, A. (2021) · Materials forming, machining and tribology · doi:10.1007/978-3-030-68024-4_9 · Cited by 61
Dynamics of Capillary-Driven Flow in 3D Printed Open Microchannels
Lade, R. K., Hippchen, E. J., Macosko, C. W., & Francis, L. F. (2017) · Langmuir · doi:10.1021/acs.langmuir.6b04506 · Cited by 69
Jönsson, A., Svejdal, R. R., Bøgelund, N., Nguyen, T. T. T. N., Flindt, H., Kutter, J. P., Rand, K. D., & Lafleur, J. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b05103 · Cited by 53
Antimicrobial Thiol–ene–acrylate Photosensitive Resins for DLP 3D Printing
Li, Z., Wang, C., Qiu, W., & Liu, R. (2019) · Photochemistry and Photobiology · doi:10.1111/php.13099 · Cited by 53
Ho, D. H., Hong, P., Han, J. T., Kim, S., Kwon, S., & Cho, J. H. (2019) · Advanced Science · doi:10.1002/advs.201902521 · Cited by 53
Impact of metal additives on particle emission profiles from a fused filament fabrication 3D printer
Alberts, E. M., Ballentine, M. L., Barnes, E., & Kennedy, A. R. (2020) · Atmospheric Environment · doi:10.1016/j.atmosenv.2020.117956 · Cited by 53
Ghelich, P., Kazemzadeh‐Narbat, M., Najafabadi, A. H., Samandari, M., Memić, A., & Tamayol, A. (2022) · Advanced NanoBiomed Research · doi:10.1002/anbr.202100073 · Cited by 56
Arifin, N., Sudin, I., Ngadiman, N. H. A., & Ishak, M. S. A. (2022) · Polymers · doi:10.3390/polym14102119 · Cited by 60
“In the biomedical field, the development of SLA technology has led to the fabrication of mold-assisted implant fabrication, aids for complicated surgery, and fabrication of tissue engineering scaffolds [83,84].”
BackgroundAghaamoo, M., Zhang, Z., Chen, X., & Xu, J. (2015) · Biomicrofluidics · doi:10.1063/1.4922081 · Cited by 52
Carbon Nanotubes and Graphene as Additives in 3D Printing
Acquah, S. F. A., Leonhardt, B. E., Nowotarski, M. S., Magi, J. M., Chambliss, K. A., Venzel, T. E. S., Delekar, S. D., & Al-Hariri, L. A. (2016) · InTech eBooks · doi:10.5772/63419 · Cited by 59
“Both the filaments and pellets extruded through a filament-producer are compatible with commercially available FDM printers.”
BackgroundInfluential3D printing technology as innovative tool for math and geometry teaching applications
Huleihil, M. M. (2017) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/164/1/012023 · Cited by 52
Pinger, C. W., Heller, A. A., & Spence, D. M. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b01848 · Cited by 53
Self-citationRao, Z. X., Patel, B., Monaco, A., Cao, Z. J., Barniol‐Xicota, M., Pichon, E., Ladlow, M., & Hilton, S. T. (2017) · European Journal of Organic Chemistry · doi:10.1002/ejoc.201701111 · Cited by 52
3D printed microfluidic device with integrated optical sensing for particle analysis
Hampson, S. M., Rowe, W., Christie, S. D. R., & Platt, M. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.10.041 · Cited by 53
Yang, Y., Liu, X., Xia, Y., Liu, X., Wu, W., Xiong, H., Zhang, H., Xu, L., Wong, K. K. L., Ouyang, H., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-15620-1 · Cited by 56
Advantages and disadvantages of 3D printing for pre-operative planning of revision hip surgery
Tserovski, S., Georgieva, S., Simeonov, R., Bigdeli, A. K., Röttinger, H., & Kinov, P. S. (2019) · Journal of Surgical Case Reports · doi:10.1093/jscr/rjz214 · Cited by 52
“stl-filethat can be later uploaded onto a 3D printing machine [2].”
Method3D printing of conjugated polymers
Jordan, R. S., & Wang, Y. (2019) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24893 · Cited by 55
Rifaie‐Graham, O., Galensowske, N. F. B., Dean, C., Pollard, J., Balog, S., Gouveia, M. G., Chami, M., Vian, A., Amstad, E., Lattuada, M., et al. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202010099 · Cited by 52
Heuer, C., Preuß, J., Habib, T., Enders, A., & Bahnemann, J. (2021) · Engineering in Life Sciences · doi:10.1002/elsc.202100081 · Cited by 56
A bibliometric indicators analysis of additive manufacturing research trends from 2010 to 2020
Jemghili, R., Taleb, A. A., & Mansouri, K. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2020-0274 · Cited by 55
Hosny, K. M., Alkhalidi, H. M., Alharbi, W. S., Md, S., Sindi, A. M., Ali, S. A., Bakhaidar, R. B., Almehmady, A. M., Alfayez, E., & Kurakula, M. (2021) · Polymers · doi:10.3390/polym14010092 · Cited by 57
3D printing of microfluidic devices for paper-assisted direct spray ionization mass spectrometry
Duarte, L. C., de Carvalho, T. C., Lobo‐Júnior, E. O., Abdelnur, P. V., Vaz, B. G., & Coltro, W. K. T. (2015) · Analytical Methods · doi:10.1039/c5ay03074a · Cited by 51
Recent trends in capillary and micro-chip electrophoretic instrumentation for field-analysis
Zhang, M., Phung, S. C., Šmejkal, P., Guijt, R. M., & Breadmore, M. C. (2018) · Trends in Environmental Analytical Chemistry · doi:10.1016/j.teac.2018.03.001 · Cited by 51
Leng, J., Wu, J., Chen, N., Xu, X. M., & Zhang, J. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2019-0139 · Cited by 51
Su, C., Hsia, S.-C., & Sun, Y. (2014) · Analytica Chimica Acta · doi:10.1016/j.aca.2014.06.037 · Cited by 50
Experimental study to prevent the warping of 3D models in fused deposition modeling
Singh, K. (2018) · International Journal of Plastics Technology · doi:10.1007/s12588-018-9206-y · Cited by 50
“It can be observed however that FDM serves as a compromise between cost effective machinery, material and strength of 3D model [3], therefore it is used most commonly by the beginners and researchers for quick prototyping.”
BackgroundAhmed, K., Kawakami, M., Khosla, A., & Furukawa, H. (2019) · Polymer Journal · doi:10.1038/s41428-018-0166-z · Cited by 50
Roppolo, I., Frascella, F., Gastaldi, M., Castellino, M., Ciubini, B., Barolo, C., Scaltrito, L., Nicosia, C., Zanetti, M., & Chiappone, A. (2019) · Polymer Chemistry · doi:10.1039/c9py00962k · Cited by 52
All-Printed In-Plane Supercapacitors by Sequential Additive Manufacturing Process
Seol, M., Nam, I., Ribeiro, E. L., Segel, B., Lee, D. I., Palma, T., Wu, H., Mukherjee, D., Khomami, B., Hill, C. W., et al. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c00510 · Cited by 50
3D printing technology for textiles and fashion
Dip, T. M., Emu, A. S., Nafiz, M. N. H., Kundu, P., Rakhi, H. R., Sayam, A., Akhtarujjman, M., Shoaib, M., Ahmed, M. S., Ushno, S. T., et al. (2020) · Textile Progress · doi:10.1080/00405167.2021.1978223 · Cited by 61
Parhi, R. (2023) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2023.104395 · Cited by 54
Lockwood, S. Y., Meisel, J. E., Monsma, F. J., & Spence, D. M. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.5b04270 · Cited by 49
Self-citationAdvances in 3-Dimensional Printing in Otolaryngology: A Review
VanKoevering, K. K., Hollister, S. J., & Green, G. E. (2016) · JAMA Otolaryngology–Head & Neck Surgery · doi:10.1001/jamaoto.2016.3002 · Cited by 50
Azimi, P., Fazli, T., & Stephens, B. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12578 · Cited by 56
“In the FFF process, a 3D object is formed layer by layer as a ther-moplastic filament is forced through a heated extrusion nozzle, melted, and deposited in thin layers onto a moving baseplate (Gross et al. 2014).”
Application of three-dimensional printing for colon targeted drug delivery systems
Tambuwala, M. M., Charbe, N. B., McCarron, P., & Lane, M. E. (2017) · International Journal of Pharmaceutical Investigation · doi:10.4103/jphi.jphi_32_17 · Cited by 54
“3D printer could solve this issue by facilitating the print of polymer over the powder bed in layers of 200 μm thickness or less, thereby creating a barrier between the active drugs to allow the controlled release.[49] 3D printers also allow the fabrication of complex geometries such as doughnut shape, oval shape, or…”
Background3D printing technologies for 3D scaffold engineering
Do, A., Smith, R., Acri, T. M., Geary, S. M., & Salem, A. K. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100979-6.00009-4 · Cited by 61
Li, W., Christiansen, T. L., Li, C., Zhou, Y., Fei, H., Mamakhel, A. H., Iversen, B. B., & Watkins, J. J. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.08.019 · Cited by 50
Poskus, M. D., Wang, T., Deng, Y., Borcherding, S., Atkinson, J., & Zervantonakis, I. K. (2023) · Microsystems & Nanoengineering · doi:10.1038/s41378-023-00607-y · Cited by 57
“Vat photopolymerization is a promising 3D printing technology that offers greater resolution (18 – 250 μ m resolution) 26,27 and improved surface quality compared to fused deposition modeling 3D printing methods 13,16,28 .”
Týčová, A., Přikryl, J., & Foret, F. (2015) · Electrophoresis · doi:10.1002/elps.201500467 · Cited by 51
Maia, M. R. G., Marques, S., Cabrita, A. R. J., Wallace, R. J., Thompson, G., Fonseca, A. J. M., & Oliveira, H. M. (2016) · Frontiers in Microbiology · doi:10.3389/fmicb.2016.01381 · Cited by 54
“Following this validation of the novel instrumentation, future development could take advantage of further developments in 3D printing solutions (Gross et al., 2014), LED light sources (Macka et al., 2014), and flow cell designs (Tymecki et al., 2008; Myers et al., 2013), which would lead to new…”
MethodFacile Preparation of Photocurable Siloxane Composite for 3D Printing
Palaganas, J. O., Leon, A. C. D., Mangadlao, J. D., Palaganas, N. B., Mael, A., Lee, Y. J., Lai, H. Y., & Advíncula, R. C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600477 · Cited by 54
Electrochemiluminescence Detection in Paper‐Based and Other Inexpensive Microfluidic Devices
Gross, E. M., Durant, H. E., Hipp, K. N., & Lai, R. Y. (2017) · ChemElectroChem · doi:10.1002/celc.201700426 · Cited by 48
Solution‐Based 3D Printing of Polymers of Intrinsic Microporosity
Zhang, F., Ma, Y., Liao, J., Breedveld, V., & Lively, R. P. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201800274 · Cited by 48
Adoption of 3D printing technology: an Innovation Diffusion Theory perspective
Marak, Z. R., Tiwari, A. K., & Tiwari, S. P. (2019) · International Journal of Innovation · doi:10.5585/iji.v7i1.393 · Cited by 64
“Some of the most widely discussed AM technologies are Stereolithography (SL), Fused Deposition Modelling (FDM), Laminated Object Manufacturing (LOM), Selective Laser Sintering (SLS), 3D Printing (3DP), Electron Beam Melting (EBM), Laser Melting (LM) and Laser Metal Deposition (LMD) among many others (Hagedorn, 2017; G…”
BackgroundInfluentialHart, C., Didier, C. M., Sommerhage, F., & Rajaraman, S. (2020) · Biosensors · doi:10.3390/bios10110152 · Cited by 56
“Some groups have studied some of these resins with little luck in having any extended cell viability, except for the few groups that add prolonged UV treatment to the usual post-print processing [1,2,4,7,8,18,19,28,29].”
BackgroundMethodGordeev, E. G., & Ananikov, V. P. (2020) · Russian Chemical Reviews · doi:10.1070/rcr4980 · Cited by 48
Geisler, E., Lecompère, M., & Soppera, O. (2022) · Photonics Research · doi:10.1364/prj.453338 · Cited by 52
Effect of different pore sizes of 3D printed PLA-based scaffold in bone tissue engineering
Büyük, N. İ., Aksu, D., & Köse, G. T. (2022) · International Journal of Polymeric Materials · doi:10.1080/00914037.2022.2075869 · Cited by 47
“When this technology combines the features of PLA, it has been seen that customized materials can be developed and it has been used in a wide area from industrial to architecture([16]).”
BackgroundShaukat, U., Sölle, B., Rossegger, E., Rana, S., & Schlögl, S. (2022) · Polymers · doi:10.3390/polym14245377 · Cited by 52
“It should be noted that most of these systems rely on a radically-induced chain growth reaction of (meth)acrylate moieties, which often yields photopolymer networks that suffer from high network heterogeneities, low toughness, and low monomer conversion [48,49].”
BackgroundGurel, M., Rathod, N. B., Cabrera, L. Y., Voyton, S., Yeo, M., Özoğul, F., & Ozbolat, I. T. (2024) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2024.104670 · Cited by 50
A new method of fabricating a blend scaffold using an indirect three-dimensional printing technique
Jung, J. W., Lee, H., Hong, J. M., Park, J., Shim, J. H., Choi, T. H., & Cho, D. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045003 · Cited by 51
Radiology’s Emerging Role in 3-D Printing Applications in Health Care
Trace, A. P., Ortiz, D., Deal, A. K., Retrouvey, M., Elzie, C. A., Goodmurphy, C., Morey, J., & Hawkins, C. M. (2016) · Journal of the American College of Radiology · doi:10.1016/j.jacr.2016.03.025 · Cited by 48
“The latter remains the foundation of many commercially available 3-D printing machines [1].”
BackgroundAutomated 3-D Printed Arrays to Evaluate Genotoxic Chemistry: E-Cigarettes and Water Samples
Kadimisetty, K., Malla, S., & Rusling, J. F. (2017) · ACS Sensors · doi:10.1021/acssensors.7b00118 · Cited by 50
Mobbs, R. J., Choy, W. J., Wilson, P., McEvoy, A., Phan, K. H., & Parr, W. C. (2018) · World Neurosurgery · doi:10.1016/j.wneu.2018.01.078 · Cited by 47
3-dimensional printing for anterior cervical surgery: a review
Choy, W. J., Parr, W. C., Phan, K. H., Walsh, W. R., & Mobbs, R. J. (2018) · Journal of Spine Surgery · doi:10.21037/jss.2018.12.01 · Cited by 48
“STL file of the hard or soft tissue anatomical structures of interest (35,39-42).”
BackgroundMethodInfluentialDesign of Electrochemical Microfluidic Detectors: A Review
Li, T., Díaz‐Real, J. A., & Holm, T. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100569 · Cited by 47
Chen, X., Wu, Y., Ranjan, V., & Zhang, Y. (2018) · Carbon · doi:10.1016/j.carbon.2018.03.064 · Cited by 46
Su, C., & Chen, W.-C. (2018) · Microchimica Acta · doi:10.1007/s00604-018-2812-8 · Cited by 46
On the optimal object orientation in additive manufacturing
Pereira, S., Vaz, A. I. F., & Vicente, L. N. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2218-0 · Cited by 50
“The first technique consists in converting the information of a CAD file into a stereolithography (STL) file [8].”
MethodThree-Dimensional Printed Photoluminescent Polymeric Waveguides
Frascella, F., Gonzalez, G. A., Bosch, P., Angelini, A., Chiappone, A., Sangermano, M., Pirri, C. F., & Roppolo, I. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b16036 · Cited by 46
A 3D-Printed Ultra-Low Young’s Modulus β-Ti Alloy for Biomedical Applications
Pellizzari, M., Jam, A., Tschon, M., Fini, M., Lora, C., & Benedetti, M. (2020) · Materials · doi:10.3390/ma13122792 · Cited by 46
“AM will prospectively allow tailoring a specific implant to the patient and producing it on demand, with large savings on time and costs [20].”
Background3-D Printing Technologies From Infancy to Recent Times: A Scientometric Review
Sood, S. K., Rawat, K. S., & Sharma, G. (2022) · IEEE Transactions on Engineering Management · doi:10.1109/tem.2021.3134128 · Cited by 45
3D printing: trends and approaches toward achieving long-term sustainability in the food industry
Thorakkattu, P., Awasti, N., Babu, K. S., Khanashyam, A. C., Deliephan, A., Shah, K., Singh, P., Pandiselvam, R., & Nirmal, N. P. (2024) · Critical Reviews in Biotechnology · doi:10.1080/07388551.2024.2344577 · Cited by 48
“The use of 3D printing technology in fields of automotive, aerospace, fashion and medical, Gross et al. [57], have already made a strong relevance to the growing demands of consumers from the last three decades and the potential advantages 3D printing technology has also expanded the interest of…”
Kim, S., Traoré, Y. L., Ho, E. A., Shafiq, M., Kim, S. H., & Liu, S. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.10.003 · Cited by 46
Ren, Y., Lan, M., Zhou, L., & Guo, G. F. (2019) · AAPS PharmSciTech · doi:10.1208/s12249-019-1300-8 · Cited by 47
Evaluation of silk‐based bioink during pre and post 3D bioprinting: A review
Gupta, S., Alrabaiah, H., Christophe, M., Rahimi‐Gorji, M., Nadeem, S., & Bit, A. (2021) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.34699 · Cited by 44
Surface Treatment and Bioinspired Coating for 3D-Printed Implants
Liu, J., Rafiq, N. M., Wong, L. M., & Wang, S. (2021) · Frontiers in Chemistry · doi:10.3389/fchem.2021.768007 · Cited by 47
“The open-source database allows professionals to selectively tailor design dimensions according to the anatomical model of patients (Gross et al., 2014; Ventola, 2014).”
Method3D-printed electrochemical platform with multi-purpose carbon black sensing electrodes
Silva‐Neto, H. A., Dias, A. A., & Coltro, W. K. T. (2022) · Microchimica Acta · doi:10.1007/s00604-022-05323-4 · Cited by 49
3D Printing in the Chemistry Curriculum: Inspiring Millennial Students To Be Creative Innovators
Violante, L. E. H., Nuñez, D., Ryan, S., & Grubbs, W. T. (2014) · ACS symposium series · doi:10.1021/bk-2014-1180.ch009 · Cited by 44
Review on 3D Prototyping of Damage Tolerant Interdigitating Brick Arrays of Nacre
Yadav, R., Naebe, M., Wang, X., & Kandasubramanian, B. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b01679 · Cited by 45
Shi, X., Pu, H., Shi, L. L., He, T., & Chen, J. (2025) · Nanoscale · doi:10.1039/d4nr04441j · Cited by 48
Additive Manufacturing in Fluid Process Engineering
Femmer, T., Flack, I., & Weßling, M. (2016) · Chemie Ingenieur Technik · doi:10.1002/cite.201500086 · Cited by 46
Chen, C., Mehl, B. T., Sell, S. A., & Martin, R. S. (2016) · The Analyst · doi:10.1039/c6an01282e · Cited by 44
Self-citationThe Accuracy and Applicability of 3D Modeling and Printing Blunt Force Cranial Injuries
Edwards, J. A., & Rogers, T. L. (2017) · Journal of Forensic Sciences · doi:10.1111/1556-4029.13627 · Cited by 44
Su, C., Chen, Y., & Sun, Y. (2019) · Microchemical Journal · doi:10.1016/j.microc.2019.02.015 · Cited by 44
Recent advances in three‐dimensional bioprinting of stem cells
Eswaramoorthy, S. D., Ramakrishna, S., & Rath, S. N. (2019) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2839 · Cited by 48
Low-cost and open-source strategies for chemical separations
Davis, J. J., Foster, S. W., & Grinias, J. P. (2020) · Journal of Chromatography A · doi:10.1016/j.chroma.2020.461820 · Cited by 44
3D food printing: paving way towards novel foods
SINGHAL, S., RASANE, P., KAUR, S., GARBA, U., BANKAR, A., SINGH, J., & GUPTA, N. (2020) · Anais da Academia Brasileira de Ciências · doi:10.1590/0001-3765202020180737 · Cited by 43
Shan, Y., Krishnakumar, A., Qin, Z., & Mao, H. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102653 · Cited by 43
Zhao, G. H., Tran, T., Modha, S., Sedki, M., Myung, N. V., Jassby, D., & Mulchandani, A. (2022) · Frontiers in Chemistry · doi:10.3389/fchem.2022.815805 · Cited by 49
“Lately, three-dimensional (3D) printing has received a great deal of attention as one kind of rapid prototyping technology, which has been widely applied in various microscale production fields (Andrew Clayton et al., 2006; Gross et al., 2014; Kolesky et al., 2014; Murphy and Atala, 2014; Johnson et al., 2015; Ambrosi…”
BackgroundJoão, A. F., de Faria, L. V., Ramos, D., da Rocha, R. G., Richter, E. M., & Muñoz, R. A. A. (2022) · Microchemical Journal · doi:10.1016/j.microc.2022.107565 · Cited by 43
Integration of 3D Printing–Coelectrospinning: Concept Shifting in Biomedical Applications
Ghosh, A., Orasugh, J. T., Ray, S. S., & Chattopadhyay, D. (2023) · ACS Omega · doi:10.1021/acsomega.3c03920 · Cited by 50
A 3D-Printed Oxygen Control Insert for a 24-Well Plate
Brennan, M., Rexius‐Hall, M. L., & Eddington, D. (2015) · PLoS ONE · doi:10.1371/journal.pone.0137631 · Cited by 48
“3D printing of microfluidic devices enables rapid, one-step fabrication of complex designs infeasible to make with planar lithography and replica molding techniques [3, 4].”
BackgroundMaier, M. C., Lebl, R., Sulzer, P., Lechner, J., Mayr, T., Zadravec, M., Slama, E., Pfanner, S., Schmölzer, C., Pöchlauer, P., et al. (2018) · Reaction Chemistry & Engineering · doi:10.1039/c8re00278a · Cited by 47
3D printing for aqueous and non-aqueous redox flow batteries
Ambrosi, A., & Webster, R. D. (2020) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2020.02.005 · Cited by 43
Ahmed, A., Azam, A., Bhutta, M. M. A., Khan, F. A., Aslam, R., & Tahir, Z. (2021) · Cleaner Environmental Systems · doi:10.1016/j.cesys.2021.100042 · Cited by 43
How 3D printing can boost advances in analytical and bioanalytical chemistry
Ambrosi, A., & Bonanni, A. (2021) · Microchimica Acta · doi:10.1007/s00604-021-04901-2 · Cited by 46
Karamchand, L., Makeiff, D., Gao, Y., Azyat, K., Serpe, M. J., & Kulka, M. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00255 · Cited by 48
Applications of 3‐dimensional printing in small‐animal surgery: A review of current practices
Altwal, J., Wilson, C. H., & Griffon, D. J. (2021) · Veterinary Surgery · doi:10.1111/vsu.13739 · Cited by 53
Wang, L., Yang, C., Sun, C., Yan, X., He, J., Shi, C., Liu, C., Li, D., Jiang, T., & Huang, L. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i4.615 · Cited by 42
“In response to the limitations of traditional processing technology, 3D printing technology, as one of the most intelligent manufacturing technologies, plays a more and more prominent role[61,62].”
BackgroundHigh‐Scale 3D‐Bioprinting Platform for the Automated Production of Vascularized Organs‐on‐a‐Chip
Fritschen, A., Lindner, N., Scholpp, S., Richthof, P., Dietz, J., Linke, P., Guttenberg, Z., & Blaeser, A. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202304028 · Cited by 44
Kumar, M., Kumar, R., & Kumar, R. (2024) · Polymer Composites · doi:10.1002/pc.28823 · Cited by 45
Bionic Prototyping of Honeycomb Patterned Polymer Composite and Its Engineering Application
Korde, J. M., Shaikh, M., & Kandasubramanian, B. (2018) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2018.1434667 · Cited by 42
“Photoinitiators and UV absorbers may be incorporated in the resin for controlling the depth of the polymerization process for greater efficiency and enriched resolution.([85,86]) SLA technique exhibits the potential of printing products with high resolution.”
BackgroundPorous 3D Printed Scavenger Filters for Selective Recovery of Precious Metals from Electronic Waste
Lahtinen, E., Hänninen, M. M., Kinnunen, K. M., Tuononen, H. M., Vaisanen, A. O., Rissanen, K. T., & Haukka, M. (2018) · Advanced Sustainable Systems · doi:10.1002/adsu.201800048 · Cited by 44
Emerging Applications of Additive Manufacturing in Biosensors and Bioanalytical Devices
Ruan, X., Wang, Y., Cheng, N., Niu, X., Chang, Y., Li, L., Du, D., & Lin, Y. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000171 · Cited by 43
Metadata
- Authors
- Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Spence, Dana M.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-30
- Volume
- 86
- Issue
- 7
- Pages
- 3240-3253
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2043704558
- Cited by
- 1,746
- References
- 162
- Citations by year
- 2026: 58 · 2025: 93 · 2024: 130 · 2023: 141 · 2022: 152 · 2021: 154 · 2020: 167 · 2019: 187 · 2018: 224 · 2017: 192 · 2016: 141 · 2015: 83 · 2014: 23
- Type
- other
- Language
- en
- Open access
- closed
- Locations
- Analytical Chemistry (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Social Sciences › Education › Various Chemistry Research Topics
- Keywords
- 3D printing, additive manufacturing, biotechnology, chemical sciences, laboratory applications, printing technology, history of 3D printing, research laboratories, teaching laboratory
- MeSH terms
- Biotechnology, Chemistry, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.