Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
The DOI matches its Crossref record; 148 of the 162 references it cites were found in a registry or an index.
Abstract
Nearing 30 years since its introduction, 3D printing technology is set to revolutionize research and teaching laboratories. This feature encompasses the history of 3D printing, reviews various printing methods, and presents current applications. The authors offer an appraisal of the future direction and impact this technology will have on laboratory settings as 3D printers become more accessible.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Patterning proteins and cells using soft lithography
Kane, R. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00165-9 · Cited by 1,490
Engineering cell shape and function
Singhvi, R., Kumar, A., Lopez, G. P., Stephanopoulos, G. N., Wang, D. I. C., Whitesides, G. M., & Ingber, D. E. (1994) · Science · doi:10.1126/science.8171320 · Cited by 1,453
Research works printed but not linked: 21
- Leukers B., 2005, J. Mater. Sci.: Mater. Med., 16, 1121
- Lipton, J.; Arnold, D.; Nigl, F.; Lopez, N.; Cohen, D.; Noren, N.; Lipson, H.InSolid Freeform Fabrication Symposium, 2010.
- Campbell J., 2005, J. Text. Apparel, Technol. Manage., 4, 1
- Pan, Y.; Zhou, C.; Chen, Y.InProceedings of the 2012 International Manufacturing Science and Engineering Conference, 2012; pp4–8.
- Takagi, T.; Nakajima, N.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp173–178.
- Ikuta, K.; Hirowatari, K.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp42–47.
- Strutt J. W., 1879, Tr. Mat. O-va, 4
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Landers R., 2002, J. Mater. Sci., 37, 3107, 10.1023/A:1016189724389 · DOI · Paper page
- Kruth, J.P.; Levy, G.; Schindel, R.; Craeghs, T.; Yasa, E.InProceedings of the 3rd International Conference on Polymers and Moulds Innovations, 2008; pp15–30;
- Van Weeren, R.; Agarwala, M.; Jamalabad, V.; Bandyophadyay, A.; Vaidyanathan, R.; Langrana, N.; Safari, A.; Whalen, P.; Danforth, S.; Ballard, C.InProceedings of the Solid Freeform Fabrication Symposium;ASME:New York, 1995; pp314–321.
- Agarwala, M.; Van Weeren, R.; Bandyopadhyay, A.; Whalen, P.; Safari, A.; Danforth, S.InProceedings of Solid Freeform Fabrication Symposium, The University of Texas, Austin, TX, August 12–14, 1996; pp385–392.
- Frank, M. C.; Peters, F. E.; Karthikeyan, R.24th Annual International Solid Freeform Fabrication Symposium–An Additive Manufacturing Conference, The University of Texas at Austin, Austin, TX, 2010.
- Flach, L.; Jacobs, M. A.; Klosterman, D. A.; Chartoff, R.InSolid Freeform Fabrication Symposium Proceedings, University of Texas at Austin, Austin, TX, 1998; pp407–416.
- Leukers B., 2005, Mater. Sci. Eng. Technol., 36, 781
- Mironov V., 2003, Trends Biotechnol., 21, 151, 10.1016/S0167-7799(03)00033-7 · DOI · Paper page
- Tam M. D., 2012, Radiol. Case, 6, 31
- Klepacek I., 2012, Forensic Sci. Med. Pathol., 8, 451
- Noecker A. M., 2006, Pediatr. Circ. Support Perfusion, 52, 349
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Mathieson J. S., 2013, Beilstein J. Org. Chem., 4, 285
Cited by
Items 201–300 of 1,001
Seeing the Light: Advancing Materials Chemistry through Photopolymerization
Corrigan, N. A., Yeow, J., Judzewitsch, P. R., Xu, J., & Boyer, C. A. (2018) · Angewandte Chemie · doi:10.1002/ange.201805473 · Cited by 142
Material Considerations for Fused-Filament Fabrication of Solid Dosage Forms
Fuenmayor, E. A., Forde, M., Healy, A. V., Devine, D. M., Lyons, J. G., McConville, C., & Major, I. (2018) · Pharmaceutics · doi:10.3390/pharmaceutics10020044 · Cited by 148
“The production process is available in some different formats [2], but it can be best defined as a process that creates a physical object from a digital model through the layer-by-layer deposition of material.”
Backgroundhadad, A. A. E., Rosa-Sainz, A., Cañete, R., Peralta, E., Begines, B., Balbuena, M., Alcudia, A., & Torres, Y. (2023) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2023.100760 · Cited by 157
3D‐Printing of Functional Biomedical Microdevices via Light‐ and Extrusion‐Based Approaches
Hwang, H. H., Zhu, W. Z., Victorine, G., Lawrence, N., & Chen, S. (2017) · Small Methods · doi:10.1002/smtd.201700277 · Cited by 160
Okwuosa, T. C., Soares, C., Gollwitzer, V., Habashy, R., Timmins, P., & Alhnan, M. A. (2018) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.03.010 · Cited by 139
“Its use is well established for pharmaceutical purposes as a solubility enhancer (Higashi et al., 2016; Saal et al., 2017, 2018), stability enhancer (Ochi et al.”
BackgroundInkjet 3D printing of UV and thermal cure silicone elastomers for dielectric elastomer actuators
McCoul, D., Rosset, S., Schlatter, S., & Shea, H. R. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa9695 · Cited by 155
Pharmaceutical applications of 3D printing technology: current understanding and future perspectives
Park, B. J., Choi, H. J., Moon, S. J., Kim, S. J., Bajracharya, R., Min, J. Y., & Han, H. (2018) · Journal of Pharmaceutical Investigation · doi:10.1007/s40005-018-00414-y · Cited by 186
Asano, H., & Shiraishi, Y. (2015) · Analytica Chimica Acta · doi:10.1016/j.aca.2015.04.014 · Cited by 137
A versatile and membrane-less electrochemical reactor for the electrolysis of water and brine
H. Hashemi, S. M., Karnakov, P., Hadikhani, P., Chinello, E., Litvinov, S., Moser, C., Koumoutsakos, P., & Psaltis, D. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00219g · Cited by 137
Self-healing polymers with nanomaterials and nanostructures
Zhai, L., Narkar, A. R., & Ahn, B. K. (2019) · Nano Today · doi:10.1016/j.nantod.2019.100826 · Cited by 142
3D Printing Technology in Drug Delivery: Recent Progress and Application
Kotta, S., Nair, A. B., & Alsabeelah, N. (2018) · Current Pharmaceutical Design · doi:10.2174/1381612825666181206123828 · Cited by 135
E-Tattoos: Toward Functional but Imperceptible Interfacing with Human Skin
Li, H., Tan, P., Rao, Y., Bhattacharya, S., Wang, Z., Kim, S., Gangopadhyay, S., Shi, H., Jankovic, M., Huh, H., et al. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00626 · Cited by 151
Recent developments and directions in printed nanomaterials
Choi, H. W., Zhou, T., Singh, M., & Jabbour, G. E. (2014) · Nanoscale · doi:10.1039/c4nr03915g · Cited by 142
Modular Elastomer Photoresins for Digital Light Processing Additive Manufacturing
Thrasher, C. J., Schwartz, J. J., & Boydston, A. J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13909 · Cited by 147
Three-dimensional Printing in Orthopaedic Surgery: Current Applications and Future Developments
Wixted, C. M., Peterson, J. R., Kadakia, R. J., & Adams, S. B. (2021) · JAAOS Global Research and Reviews · doi:10.5435/jaaosglobal-d-20-00230 · Cited by 133
All-printed triboelectric nanogenerator
Seol, M., Han, J., Moon, D., Yoon, K. J., Hwang, C. S., & Meyyappan, M. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.11.067 · Cited by 137
Tissue and Organ 3D Bioprinting
Xia, Z., Jin, S., & Ye, K. (2018) · SLAS Technology · doi:10.1177/2472630318760515 · Cited by 128
Yang, J. H., An, X., Liu, L., Tang, S., Cao, H., Xu, Q., & Liu, H. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116881 · Cited by 138
3D-printed biodegradable gyroid scaffolds for tissue engineering applications
Germain, L., Fuentes, C. A., van Vuure, A. W., des Rieux, A., & Dupont-Gillain, C. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.04.037 · Cited by 127
Possible Applications of Additive Manufacturing Technologies in Shipbuilding: A Review
Ziółkowski, M., & Dyl, T. C. (2020) · Machines · doi:10.3390/machines8040084 · Cited by 131
“The first patents for devices producing objects additively began to appear in the 1980s and the first commercial device using stereolithography technology was released in 1987 [1].”
BackgroundFunctional Dyes in Polymeric 3D Printing: Applications and Perspectives
Gastaldi, M., Cardano, F., Zanetti, M., Viscardi, G., Barolo, C., Bordiga, S., Magdassi, S., Fin, A., & Roppolo, I. (2020) · ACS Materials Letters · doi:10.1021/acsmaterialslett.0c00455 · Cited by 144
“42 FFF is a mature technology with few drawbacks, among which, the most important one is related to the limited resolution to about 50 μm.”
InfluentialChoy, W. J., Mobbs, R. J., Wilcox, B., Phan, S., Phan, K. H., & Sutterlin, C. E. (2017) · World Neurosurgery · doi:10.1016/j.wneu.2017.05.133 · Cited by 129
Bioprinting: A review of processes, materials and applications
Yılmaz, B., Rashid, A. A., Mou, Y. A., Evis, Z., & Koç, M. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00148 · Cited by 140
Additive Manufacturing Technologies: 3D Printing in Organic Synthesis
Rossi, S., Puglisi, A., & Benaglia, M. (2017) · ChemCatChem · doi:10.1002/cctc.201701619 · Cited by 146
Envisioning smart and sustainable healthcare: 3D Printing technologies for personalized medication
Aquino, R. P., Barile, S., Grasso, A., & Saviano, M. (2018) · Futures · doi:10.1016/j.futures.2018.03.002 · Cited by 143
Review of 3D cell culture with analysis in microfluidic systems
Castiaux, A. D., Spence, D. M., & Martin, R. S. (2019) · Analytical Methods · doi:10.1039/c9ay01328h · Cited by 124
Self-citation3D printing of glass by additive manufacturing techniques: a review
Zhang, D., Liu, X., & Qiu, J. (2020) · Frontiers of Optoelectronics · doi:10.1007/s12200-020-1009-z · Cited by 138
3D printable light-responsive polymers
Roppolo, I., Chiappone, A., Angelini, A., Stassi, S., Frascella, F., Pirri, C. F., Ricciardi, C., & Descrovi, E. (2017) · Materials Horizons · doi:10.1039/c7mh00072c · Cited by 131
Combining additive manufacturing and catalysis: a review
Hurt, C., Brandt, M., Priya, S. S., Bhatelia, T., Patel, J., Selvakannan, P., & Bhargava, S. (2017) · Catalysis Science & Technology · doi:10.1039/c7cy00615b · Cited by 124
Optimization of extrusion based ceramic 3D printing process for complex bony designs
Roopavath, U. K., Malferrari, S., Haver, A. V., Verstreken, F., Rath, S. N., & Kalaskar, D. M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.11.054 · Cited by 132
A 3D-Printable Polymer-Metal Soft-Magnetic Functional Composite—Development and Characterization
Khatri, B., Lappe, K., Nötzel, D., Pursche, K., & Hanemann, T. (2018) · Materials · doi:10.3390/ma11020189 · Cited by 128
3D Printing Complex Egg White Protein Objects: Properties and Optimization
Liu, L., Meng, Y., Dai, X., Chen, K., & Zhu, Y. (2018) · Food and Bioprocess Technology · doi:10.1007/s11947-018-2209-z · Cited by 134
“Printability tests that identify the viscosity, gelation, consistency, melting, and solidifying properties of food materials will be necessary (Gross et al. 2014).”
BackgroundMicrofluidic devices for detection of RNA viruses
Basiri, A., Heidari, A., Nadi, M. F., Pahlevan‐Fallahy, M., Nezamabadi, S. S., Sedighi, M., Saghazadeh, A., & Rezaei, N. (2020) · Reviews in Medical Virology · doi:10.1002/rmv.2154 · Cited by 128
Hong, Y., Wu, M., Chen, G., Dai, Z., Zhang, Y., Chen, G., & Dong, X. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10464 · Cited by 129
3D-Printed Drugs for Children—Are We Ready Yet?
Preis, M., & Öblom, H. (2017) · AAPS PharmSciTech · doi:10.1208/s12249-016-0704-y · Cited by 133
Implementing FDM 3D Printing Strategies Using Natural Fibers to Produce Biomass Composite
Ahmed, W. K., Alnajjar, F., Zaneldin, E. K., Al-Marzouqi, A. H., Gochoo, M., & Khalid, S. (2020) · Materials · doi:10.3390/ma13184065 · Cited by 126
“In contrast, the SLA uses a UV laser, (6) multi jet fusion (MJF) which builds functional parts from powder instead of using a laser to sinter the powder MJF uses an inkjet array to apply fusing agents to the bed of powder, and (7) electron beam melting (EBM), is a metal 3D printing technology that uses an electron bea…”
MethodMahendiran, B., Muthusamy, S., Sampath, S., Jaisankar, S. N., Popat, K. C., Selvakumar, R., & Krishnakumar, G. S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.04.179 · Cited by 126
Wang, Y., Zheng, G., Jiang, N., Ying, G., Li, Y., Cai, X., Meng, J., Mai, L., Guo, M., Zhang, Y. S., et al. (2023) · Nature Reviews Methods Primers · doi:10.1038/s43586-023-00251-w · Cited by 129
Kim, H. W., Bae, H., & Park, H. J. (2017) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.10.023 · Cited by 118
Digital light processing 3D printing with thiol–acrylate vitrimers
Rossegger, E., Höller, R. J., Reisinger, D., Strasser, J., Fleisch, M., Grießer, T., & Schlögl, S. (2020) · Polymer Chemistry · doi:10.1039/d0py01520b · Cited by 121
Abdelkader, H., Fathalla, Z. M. A., Seyfoddin, A., Farahani, M., Thrimawithana, T. R., Allahham, A., Alani, A. W. G., Al-Kinani, A. A., & Alany, R. G. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.113957 · Cited by 125
Jacob, S., Nair, A. B., Patel, V., & Shah, J. (2020) · AAPS PharmSciTech · doi:10.1208/s12249-020-01771-4 · Cited by 129
Recent advances on quasi-solid-state electrolytes for supercapacitors
Amaral, M. M., Venâncio, R., Peterlevitz, A. C., & Zanin, H. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2021.11.010 · Cited by 121
Hydrogel-laden paper scaffold system for origami-based tissue engineering
Kim, S., Lee, H. R., Yu, S. J., Han, M.-E., Lee, D. Y., Kim, S., Ahn, H.-J., Han, M.-J., Lee, T.-I., Kim, T., et al. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1504745112 · Cited by 124
3D Printed PEG-Based Hybrid Nanocomposites Obtained by Sol–Gel Technique
Chiappone, A., Fantino, E., Roppolo, I., Lorusso, M., Manfredi, D., Fino, P., Pirri, C. F., & Calignano, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12578 · Cited by 130
Mechanical Properties of a Newly Additive Manufactured Implant Material Based on Ti-42Nb
Schulze, C., Weinmann, M., Schweigel, C., Keßler, O., & Bader, R. (2018) · Materials · doi:10.3390/ma11010124 · Cited by 120
Burnard, J. L., Parr, W. C., Choy, W. J., Walsh, W. R., & Mobbs, R. J. (2019) · European Spine Journal · doi:10.1007/s00586-019-06236-2 · Cited by 115
“This is then printed layer-by-layer through deposition of a raw material that is polymerised, fused or melted together (via modalities dependant on material/design specifications) to create a 3D-construct [1, 2].”
BackgroundA New era of water treatment technologies: 3D printing for membranes
Yanar, N., Kallem, P., Son, M., Park, H., Kang, S., & Choi, H. (2020) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2020.07.043 · Cited by 115
Cai, F., Chang, Y.-H., Wang, K., Zhang, C., Wang, B., & Papapolymerou, J. (2016) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/tmtt.2016.2601907 · Cited by 114
Paul, K., Darzi, S., McPhee, G., Del Borgo, M. P., Werkmeister, J. A., Gargett, C. E., & Mukherjee, S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.08.003 · Cited by 111
Zhang, J., Vo, A. Q., Feng, X., Bandari, S., & Repka, M. A. (2018) · AAPS PharmSciTech · doi:10.1208/s12249-018-1097-x · Cited by 124
“With the development of AM/3D printing technologies, researchers and industry can now produce products with more complex structures and precise quality control (12,24,32,33).”
Solvent-based Extrusion 3D Printing for the Fabrication of Tissue Engineering Scaffolds
Zhang, B., Cristescu, R., Chrisey, D. B., & Narayan, R. J. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v6i1.211 · Cited by 118
“3D printing, which is also referred as additive manufacturing, is a process in which a scaffold architecture is initially designed with computeraided design (CAD) file and subsequently fabricated in a layer-by-layer manner[1].”
Background3D-printed microneedle-based potentiometric sensor for pH monitoring in skin interstitial fluid
Parrilla, M., Vanhooydonck, A., Johns, M., Watts, R. T., & Wael, K. D. (2022) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2022.133159 · Cited by 116
Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Gmeiner, R., Edler, M., Pinter, G., & Grießer, T. (2016) · Polymer Chemistry · doi:10.1039/c6py01132b · Cited by 117
Frontal Conversion and Uniformity in 3D Printing by Photopolymerisation
Vitale, A., & Cabral, J. T. (2016) · Materials · doi:10.3390/ma9090760 · Cited by 122
“Numerous high-tech and specialist industries are actively piloting and already employing 3D printing technologies [2,3] in emerging applications in medical and analytical sciences [4], including tissue engineering [5–7], drug delivery [8], and reaction ware [9,10], but also device fabrication and microfluidics [11,12]…”
3D Tissue and Organ Printing—Hope and Reality
Shapira, A., & Dvir, T. (2021) · Advanced Science · doi:10.1002/advs.202003751 · Cited by 110
Fully 3D-Printed Preconcentrator for Selective Extraction of Trace Elements in Seawater
Su, C.-K., Peng, P.-J., & Sun, Y.-C. (2015) · Analytical Chemistry · doi:10.1021/acs.analchem.5b01599 · Cited by 111
Tappa, K. K., Jammalamadaka, U. M., Ballard, D. H., Bruno, T., Israel, M. R., Vemula, H., Meacham, J. M., Mills, D. K., Woodard, P. K., & Weisman, J. A. (2017) · PLoS ONE · doi:10.1371/journal.pone.0182929 · Cited by 111
Huang, B., Meng, S., He, H., Jia, Y., Ying-bin, X., & Huang, H. (2018) · Polymer Engineering and Science · doi:10.1002/pen.24875 · Cited by 111
3D-Printed Biosensor Arrays for Medical Diagnostics
Sharafeldin, M., Jones, A. L., & Rusling, J. F. (2018) · Micromachines · doi:10.3390/mi9080394 · Cited by 118
“SLA [54,55] Light Assisted Polymerization Acrylates Good Resolution, Flexibility Single Material Form2, FabPro, Nobel”
BackgroundCurrent status of 3D printing in spine surgery
Garg, B., & Mehta, N. H. (2018) · Journal of Clinical Orthopaedics and Trauma · doi:10.1016/j.jcot.2018.08.006 · Cited by 111
Motaghi, H., Ziyaee, S., Mehrgardi, M. A., Kajani, A. A., & Bordbar, A. (2018) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2018.07.066 · Cited by 110
Modular fabrication of intelligent material-tissue interfaces for bioinspired and biomimetic devices
Clegg, J. R., Wagner, A. M., Shin, S. R., Hassan, S., Khademhosseini, A., & Peppas, N. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100589 · Cited by 116
Costantini, M., Colosi, C., Święszkowski, W., & Barbetta, A. (2018) · Biofabrication · doi:10.1088/1758-5090/aae605 · Cited by 121
3D Printing in Personalized Drug Delivery
Afsana, Jain, V. K., Haider, N., & Jain, K. (2019) · Current Pharmaceutical Design · doi:10.2174/1381612825666190215122208 · Cited by 131
Sheha, E. D., Gandhi, S. D., & Colman, M. W. (2019) · Annals of Translational Medicine · doi:10.21037/atm.2019.08.88 · Cited by 125
“In 1984, Charles Hull patented the first device currently in use for additive manufacturing, also known as rapid prototyping or, more commonly, 3D printing (4,5).”
BackgroundOpen-source, self-replicating 3-D printer factory for small-business manufacturing
Laplume, A. O., Anzalone, G. C., & Pearce, J. M. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7970-9 · Cited by 108
“com, 2013) to tools for sustainable development [10], engineering prototypes [11], customized scientific [12-16] and medical [17,18] equipment, teaching aids [19,20]; electronic sensors [21,22] and co-creative product realization [23].”
Novak, E., & Wisdom, S. (2018) · Journal of Science Education and Technology · doi:10.1007/s10956-018-9733-5 · Cited by 139
“…in various educational contexts, including history/social studies classrooms (Maloy et al. 2017), special education (Buehler et al. 2016), anatomy education (Vaccarezza and Papa 2015), high school technology education (Chien 2017), and biotechnology and the chemical sciences (Gross et al. 2014).”
BackgroundGiri, B. R., Song, E. S., Kwon, J., Lee, J., Park, J.-B., & Kim, D. W. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12010077 · Cited by 120
In Situ Thermal Generation of Silver Nanoparticles in 3D Printed Polymeric Structures
Fantino, E., Chiappone, A., Calignano, F., Fontana, M., Pirri, C. F., & Roppolo, I. (2016) · Materials · doi:10.3390/ma9070589 · Cited by 111
Wu, F., Zheng, J., Li, Z., & Liu, M. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.145 · Cited by 113
“A notable advantage of FDM is that it can create objects fabricated from multiple material types, which enables more user control over device fabrication for experimental use [12].”
BackgroundDigital Manufacturing for Microfluidics
Naderi, A., Bhattacharjee, N., & Folch, A. (2019) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-092618-020341 · Cited by 122
“photopolymerization of the resin takes place broadly differentiates SL into two approaches (44), commonly referred to as the free-surface approach and the bat configuration.”
BackgroundDevelopment of 3D-printed myoelectric hand orthosis for patients with spinal cord injury
Yoo, H.-J., Lee, S., Kim, J., Park, C., & Lee, B. (2019) · Journal of NeuroEngineering and Rehabilitation · doi:10.1186/s12984-019-0633-6 · Cited by 129
Nanomaterial integrated 3D printing for biomedical applications
Zhang, L., Forgham, H., Shen, A., Wang, J., Zhu, J., Huang, X., Tang, S., Xu, C., Davis, T. P., & Qiao, R. (2022) · Journal of Materials Chemistry B · doi:10.1039/d2tb00931e · Cited by 114
Garekar, S., Bharati, A. H., Chokhandre, M., Mali, S., Trivedi, B. Y., Changela, V., Solanki, N., Gaikwad, S., & Agarwal, V. (2016) · World Journal for Pediatric and Congenital Heart Surgery · doi:10.1177/2150135116645604 · Cited by 106
“stl file may also include information such as the color, texture, and thickness of the object to be printed.(5,6)”
BackgroundPolyol-Silk Bioink Formulations as Two-Part Room-Temperature Curable Materials for 3D Printing
Jose, R. R., Brown, J. E., Polido, K. E., Omenetto, F. G., & Kaplan, D. L. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00160 · Cited by 105
Liao, C., Wuethrich, A., & Trau, M. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100635 · Cited by 121
Fundamentals of rapid injection molding for microfluidic cell-based assays
Lee, U. N., Su, X., Guckenberger, D. J., Dostie, A. M., Zhang, T., Berthier, E., & Theberge, A. B. (2018) · Lab on a Chip · doi:10.1039/c7lc01052d · Cited by 123
Recent advances in direct ink writing of electronic components and functional devices
Jiang, P., Ji, Z., Zhang, X., Liu, Z., & Wang, X. (2017) · Progress in Additive Manufacturing · doi:10.1007/s40964-017-0035-x · Cited by 114
Additive Manufacturing of Personalized Pharmaceutical Dosage Forms via Stereolithography
Healy, A. V., Fuenmayor, E. A., Doran, P., Geever, L. M., Higginbotham, C. L., & Lyons, J. G. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11120645 · Cited by 116
Jagadeesh, P., Puttegowda, M., Rangappa, S. M., Alexey, K., Gorbatyuk, S. M., Khan, A., Doddamani, M. R., & Siengchin, S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-09406-7 · Cited by 116
“The quick apparent benefit of 3D printing is the capability of creating complex shapes that are not possible using traditional methods [10, 11].”
Background3D Printed Organ Models for Surgical Applications
Qiu, K., Haghiashtiani, G., & McAlpine, M. C. (2018) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-061417-125935 · Cited by 125
Saed, A. B., Behravesh, A. H., Hasannia, S., Ardebili, S. A. A., Akhoundi, B., & Pourghayoumi, M. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.076 · Cited by 108
Research on large-scale additive manufacturing based on multi-robot collaboration technology
Shen, H., Pan, L., & Qian, J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100906 · Cited by 108
Balhaddad, A. A., García, I. M., Mokeem, L. S., Alsahafi, R., Majeed‐Saidan, A., Albagami, H., Khan, A. S., Ahmad, S., Collares, F. M., Bona, Á. D., et al. (2023) · Clinical Oral Investigations · doi:10.1007/s00784-023-04983-7 · Cited by 126
“The term "3D printing" given to the additive manufacturing (AM) approach was first described as stereolithography in the early 1980s [5].”
BackgroundLee, S. J., Jeong, W., & Atala, A. (2024) · Advanced Materials · doi:10.1002/adma.202408032 · Cited by 116
Sweeney, M., Campbell, L. L., Hanson, J. M., Pantoya, M. L., & Christopher, G. F. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1404-z · Cited by 110
“In particular, colloidal materials have been a major interest [6–13], because through variation of the type of colloid and solvent/binder system, fabrication of ceramics [9, 12–19], conductive pastes [20, 21], and medical materials [3, 9] is possible.”
BackgroundFully 3D printed integrated reactor array for point-of-care molecular diagnostics
Kadimisetty, K., Song, J., Doto, A. M., Hwang, Y., Peng, J. Y., Mauk, M. G., Bushman, F. D., Gross, R., Jarvis, J. N., & Liu, C. (2018) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2018.03.009 · Cited by 105
“, 3D printing) has provided an attractive alternative for rapidly producing complex microfluidic devices for bioanalytical applications (Bishop et al., 2016; Gross et al., 2014).”
BackgroundThree-Dimensional Printing Technology in Orthodontics for Dental Models: A Systematic Review
Tsolakis, I. A., Gizani, S., Panayi, N. C., Antonopoulos, G., & Tsolakis, A. I. (2022) · Children · doi:10.3390/children9081106 · Cited by 107
“Four years later, fused deposition modeling (FDM) was introduced by Scott Crump [9].”
MethodChemically Active, Porous 3D-Printed Thermoplastic Composites
Evans, K. A., Kennedy, Z. C., Arey, B. W., Christ, J. F., Schaef, H. T., Nune, S. K., & Erikson, R. L. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b17565 · Cited by 106
Applications of 3D-Printing for Improving Chemistry Education
Pinger, C. W., Geiger, M. K., & Spence, D. M. (2019) · Journal of Chemical Education · doi:10.1021/acs.jchemed.9b00588 · Cited by 102
Self-citation3D printing of biomedically relevant polymer materials and biocompatibility
Agueda, J. R. H. S., Chen, Q., Maalihan, R. D., Ren, J., da Silva, I. G. M., Dugos, N. P., Caldona, E. B., & Advíncula, R. C. (2021) · MRS Communications · doi:10.1557/s43579-021-00038-8 · Cited by 111
3D Printed Electrochemical Sensors
Abdalla, A., & Patel, B. A. (2021) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-091120-093659 · Cited by 107
Osouli-Bostanabad, K., Masalehdan, T., Kapsa, R. M. I., Quigley, A. F., Lalatsa, A., Bruggeman, K. F., Franks, S. J., Williams, R. J., & Nisbet, D. R. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00094 · Cited by 111
3D printed metal columns for capillary liquid chromatography
Sandron, S., Heery, B., Gupta, V., Collins, D. A., Nesterenko, E. P., Nesterenko, P. N., Talebi, M., Beirne, S., Thompson, F., Wallace, G. G., et al. (2014) · The Analyst · doi:10.1039/c4an01476f · Cited by 98
In-Situ Monitoring and Diagnosing for Fused Filament Fabrication Process Based on Vibration Sensors
Li, Y., Zhao, W. G., Li, Q., Wang, T., & Wang, G. (2019) · Sensors · doi:10.3390/s19112589 · Cited by 102
3D printing in tissue engineering: a state of the art review of technologies and biomaterials
Poomathi, N., Singh, S., Prakash, C., Subramanian, A., Sahay, R., Chinnappan, A., & Ramakrishna, S. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2018-0217 · Cited by 110
Zhang, Y., Ge, S., & Yu, J. (2016) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2016.09.008 · Cited by 107
Biosensors-on-chip: a topical review
Chen, S., & Shamsi, M. H. (2017) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/aa7117 · Cited by 106
4D printing of a self-morphing polymer driven by a swellable guest medium
Su, J., Tao, X., Deng, H., Zhang, C., Jiang, S., Lin, Y., & Lin, J. (2017) · Soft Matter · doi:10.1039/c7sm01796k · Cited by 103
Metadata
- Authors
- Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Spence, Dana M.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-30
- Volume
- 86
- Issue
- 7
- Pages
- 3240-3253
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2043704558
- Cited by
- 1,746
- References
- 162
- Citations by year
- 2026: 58 · 2025: 93 · 2024: 130 · 2023: 141 · 2022: 152 · 2021: 154 · 2020: 167 · 2019: 187 · 2018: 224 · 2017: 192 · 2016: 141 · 2015: 83 · 2014: 23
- Type
- other
- Language
- en
- Open access
- closed
- Locations
- Analytical Chemistry (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Social Sciences › Education › Various Chemistry Research Topics
- Keywords
- 3D printing, additive manufacturing, biotechnology, chemical sciences, laboratory applications, printing technology, history of 3D printing, research laboratories, teaching laboratory
- MeSH terms
- Biotechnology, Chemistry, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.