Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
The DOI matches its Crossref record; 148 of the 162 references it cites were found in a registry or an index.
Abstract
Nearing 30 years since its introduction, 3D printing technology is set to revolutionize research and teaching laboratories. This feature encompasses the history of 3D printing, reviews various printing methods, and presents current applications. The authors offer an appraisal of the future direction and impact this technology will have on laboratory settings as 3D printers become more accessible.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Patterning proteins and cells using soft lithography
Kane, R. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00165-9 · Cited by 1,490
Engineering cell shape and function
Singhvi, R., Kumar, A., Lopez, G. P., Stephanopoulos, G. N., Wang, D. I. C., Whitesides, G. M., & Ingber, D. E. (1994) · Science · doi:10.1126/science.8171320 · Cited by 1,453
Research works printed but not linked: 21
- Leukers B., 2005, J. Mater. Sci.: Mater. Med., 16, 1121
- Lipton, J.; Arnold, D.; Nigl, F.; Lopez, N.; Cohen, D.; Noren, N.; Lipson, H.InSolid Freeform Fabrication Symposium, 2010.
- Campbell J., 2005, J. Text. Apparel, Technol. Manage., 4, 1
- Pan, Y.; Zhou, C.; Chen, Y.InProceedings of the 2012 International Manufacturing Science and Engineering Conference, 2012; pp4–8.
- Takagi, T.; Nakajima, N.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp173–178.
- Ikuta, K.; Hirowatari, K.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp42–47.
- Strutt J. W., 1879, Tr. Mat. O-va, 4
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Landers R., 2002, J. Mater. Sci., 37, 3107, 10.1023/A:1016189724389 · DOI · Paper page
- Kruth, J.P.; Levy, G.; Schindel, R.; Craeghs, T.; Yasa, E.InProceedings of the 3rd International Conference on Polymers and Moulds Innovations, 2008; pp15–30;
- Van Weeren, R.; Agarwala, M.; Jamalabad, V.; Bandyophadyay, A.; Vaidyanathan, R.; Langrana, N.; Safari, A.; Whalen, P.; Danforth, S.; Ballard, C.InProceedings of the Solid Freeform Fabrication Symposium;ASME:New York, 1995; pp314–321.
- Agarwala, M.; Van Weeren, R.; Bandyopadhyay, A.; Whalen, P.; Safari, A.; Danforth, S.InProceedings of Solid Freeform Fabrication Symposium, The University of Texas, Austin, TX, August 12–14, 1996; pp385–392.
- Frank, M. C.; Peters, F. E.; Karthikeyan, R.24th Annual International Solid Freeform Fabrication Symposium–An Additive Manufacturing Conference, The University of Texas at Austin, Austin, TX, 2010.
- Flach, L.; Jacobs, M. A.; Klosterman, D. A.; Chartoff, R.InSolid Freeform Fabrication Symposium Proceedings, University of Texas at Austin, Austin, TX, 1998; pp407–416.
- Leukers B., 2005, Mater. Sci. Eng. Technol., 36, 781
- Mironov V., 2003, Trends Biotechnol., 21, 151, 10.1016/S0167-7799(03)00033-7 · DOI · Paper page
- Tam M. D., 2012, Radiol. Case, 6, 31
- Klepacek I., 2012, Forensic Sci. Med. Pathol., 8, 451
- Noecker A. M., 2006, Pediatr. Circ. Support Perfusion, 52, 349
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Mathieson J. S., 2013, Beilstein J. Org. Chem., 4, 285
Cited by
Items 701–800 of 1,001
Recent Advances in Additive Manufacturing of Bio-inspired Materials
Gharde, S., Surendren, A., Korde, J. M., Saini, S., Deoray, N., Goud, R., Nimje, S. V., & Kandasubramanian, B. (2019) · Springer eBooks · doi:10.1007/978-3-030-13951-3_2 · Cited by 32
Modular 3D Printed Compressed Air Driven Continuous‐Flow Systems for Chemical Synthesis
Penny, M. R., Rao, Z. X., Peniche, B. F., & Hilton, S. T. (2019) · European Journal of Organic Chemistry · doi:10.1002/ejoc.201900423 · Cited by 32
Dual-curable stereolithography resins for superior thermomechanical properties
Konuray, O., Donato, F. D., Sangermano, M., Bonada, J., Tercjak, A., Fernández‐Francos, X., Serra, À., & Ramis, X. (2020) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2020.72 · Cited by 31
“The majority of SL resins have acrylate chemistry, which results in brittle final materials with polymerization-induced shrinkage problems unless formulated using different approaches [3, 12].”
BackgroundBalavandy, S. K., Li, F., Macdonald, N. P., Maya, F., Townsend, A. T., Frederick, K. A., Guijt, R. M., & Breadmore, M. C. (2020) · Analytica Chimica Acta · doi:10.1016/j.aca.2020.11.033 · Cited by 31
3D Printing in Breast Reconstruction: From Bench to Bed
Mu, X., Zhang, J., & Jiang, Y. (2021) · Frontiers in Surgery · doi:10.3389/fsurg.2021.641370 · Cited by 33
Additively manufactured electrodes for supercapacitors: A review
Jha, S., Velhal, M., Stewart, W., Amin, V., Wang, E., & Liang, H. Y. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101220 · Cited by 39
Liao, Y., Yang, H., Liao, Q., Si, W., Chu, Y., Chu, X., & Qin, L. (2023) · Coatings · doi:10.3390/coatings13071252 · Cited by 32
Singh, H., Shimojima, M., Shiratori, T., An, L. T., Sugamata, M., & Yang, M. (2015) · Sensors · doi:10.3390/s150716503 · Cited by 31
“3D printing technologies are widely used technologies for rapid prototyping due to its ease in design development to final product development [20,26].”
BackgroundInfluentialDumitrescu, I.-B. (2018) · FARMACIA · doi:10.31925/farmacia.2018.3.1 · Cited by 31
“Increasing the number of the triangulated sections will increase the resolution of the printed piece [40]; • Slicing the 3D model into layers of specified thickness using specialist software that can also determine the amount and position of support material, which prevents the collapsing of the printed object [46,66,…”
BackgroundRapid Prototyping for Photochemical Reaction Engineering
Guba, F., Taştan, Ü., Gugeler, K., Buntrock, M., Rommel, T., & Ziegenbalg, D. (2018) · Chemie Ingenieur Technik · doi:10.1002/cite.201800035 · Cited by 35
Mendonça, D. M. H., Rocha, D. P., Dutra, G. S. V., Cardoso, R. M., Batista, A. D., Richter, E. M., & Muñoz, R. A. A. (2019) · Electroanalysis · doi:10.1002/elan.201800834 · Cited by 32
Pollack, S., Venkatesh, C., Neff, M., Healy, A. V., Hu, G. W., Fuenmayor, E. A., Lyons, J. G., Major, I., & Devine, D. M. (2019) · Springer eBooks · doi:10.1007/978-3-030-24532-0_1 · Cited by 37
Rossi, S., Porta, R., Brenna, D., Puglisi, A., & Benaglia, M. (2017) · Angewandte Chemie · doi:10.1002/ange.201612192 · Cited by 31
Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering
Baumer, V., Gunn, E., Riegle, V., Bailey, C., Shonkwiler, C., & Prawel, D. A. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14050251 · Cited by 30
Wimmer, R., Steyrer, B., Woess, J., Koddenberg, T., & Mundigler, N. (2015) · doi:10.13140/rg.2.1.2483.6563 · Cited by 30
3D printed Sm-doped ceria composite electrolyte membrane for low temperature solid oxide fuel cells
Feng, Z., Liu, L., Li, L., Chen, J., Liu, Y., Li, Y., Hao, L., & Wu, Y. Z. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.03.254 · Cited by 30
Vallabani, N. V. S., Alijagić, A., Persson, A., Wallinder, I. O., Särndahl, E., & Karlsson, H. L. (2022) · Toxicology · doi:10.1016/j.tox.2022.153100 · Cited by 33
Vera, R. H., Schwan, E., Fatsis-Kavalopoulos, N., & Kreuger, J. (2016) · PLoS ONE · doi:10.1371/journal.pone.0167583 · Cited by 30
Zhao, N., Wang, Y., Qin, L., Guo, Z., & Li, D. (2017) · RSC Advances · doi:10.1039/c7ra07204j · Cited by 34
Medical applications of stereolithography: An overview
Stawicki, S. P., Kaza, A., Rembalsky, J., Roma, N., Yellapu, V., & Delong, W. (2018) · International Journal of Academic Medicine · doi:10.4103/ijam.ijam_54_18 · Cited by 31
Keitel, B., Batista, A. D., Schimana, S., Mizaikoff, B., & Dinc, M. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c02744 · Cited by 29
Recent Advancements in Pharmaceutical 3D Printing Industry
Kulkarni, V. R., Saha, T., Giri, B. R., Lu, A., Das, S. C., & Maniruzzaman, M. (2024) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2024.106072 · Cited by 37
Recent advances of 3D-printing in spine surgery
Iqbal, J., Zafar, Z., Skandalakis, G. P., Kuruba, V., Madan, S., Kazim, S. F., & Bowers, C. A. (2024) · Surgical Neurology International · doi:10.25259/sni_460_2024 · Cited by 29
“[17] e use of 3DP technology in spinal surgery has several common applications, including models for preoperative planning, biomodels, surgical guides, implants, and teaching tools.”
Background3D Printing of Solid Electrolyte and the Application in All‐Solid‐State Batteries
Tu, Z., Chen, K., Liu, S., & Wu, X. (2025) · Small Methods · doi:10.1002/smtd.202401912 · Cited by 31
Hu, C., Lin, S., Li, W., Sun, H., Chen, Y., Chan, C.-W., Leung, C., Ma, D., Wu, H., & Ren, K. (2016) · Lab on a Chip · doi:10.1039/c6lc00957c · Cited by 29
Chakraborty, P. K., Azadmanjiri, J., Pavithra, C., Wang, X., Masood, S. H., Dey, S. R., & Wang, J. (2020) · Small · doi:10.1002/smll.202004900 · Cited by 30
Duarte, L. C., Pereira, I., Maciel, L. Í. L., Vaz, B. G., & Coltro, W. K. T. (2021) · Analytica Chimica Acta · doi:10.1016/j.aca.2021.339252 · Cited by 29
Naik, M., Thakur, D. G., & Chandel, S. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.02.305 · Cited by 29
Review on 3D printing in dentistry: conventional to personalized dental care
Ahmad, S., Hasan, N., Fauziya, Gupta, A. K., Nadaf, A., Ahmad, L., Aqil, M., & Kesharwani, P. (2022) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2022.2099666 · Cited by 39
“CBCT makes it possible to provide volumetric image data for the 3D printer before surgery and to produce replicas of the patient’s jaw [4,6,49].”
BackgroundVitrimer chemistry for 4D printing formulation
Gerdroodbar, A. E., Alihemmati, H., Bodaghi, M., Salami‐Kalajahi, M., & Zolfagharian, A. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112343 · Cited by 32
Hędrzak, E., Węgrzynowicz, A., Rachwalik, R., Sulikowski, B., & Michorczyk, P. (2019) · Applied Catalysis A General · doi:10.1016/j.apcata.2019.04.017 · Cited by 29
de Moraes, N. C., da Silva, E. N. T., Petroni, J. M., Ferreira, V. S., & Lucca, B. G. (2019) · Electrophoresis · doi:10.1002/elps.201900270 · Cited by 29
Saha, R., Sarkar, M., Choudhury, S. S., Kumar, H., Bhatt, G., & Bhattacharya, S. (2024) · Journal of Micromanufacturing · doi:10.1177/25165984241237357 · Cited by 29
Colasante, C., Sanford, Z., Garfein, E. S., & Tepper, O. M. (2016) · Current Surgery Reports · doi:10.1007/s40137-016-0127-4 · Cited by 29
“linking distance, which allows better prosthetic implantation [35]. The organic biomaterials utilized in bioprosthetics are either degradable or become incorporated into the host tissue. When compared to synthetic materials, this results in a reduction of body rejection while promoting Curr Surg Rep (2016) 4:6 Page 5…”
BackgroundMethodInfluentialFree and open‐source automated 3‐D microscope
Wijnen, B., PETERSEN, E. E., Hunt, E. J., & Pearce, J. M. (2016) · Journal of Microscopy · doi:10.1111/jmi.12433 · Cited by 28
Post-printing surface modification and functionalization of 3D-printed biomedical device
Zhang, Y. (2017) · International Journal of Bioprinting · doi:10.18063/ijb.2017.02.001 · Cited by 32
Govindarajan, S. R., Jain, T., Choi, J., Joy, A., Isayeva, I. S., & Vorvolakos, K. (2018) · Polymer · doi:10.1016/j.polymer.2018.06.014 · Cited by 29
FDM filaments with unique segmentation since evolution: a critical review
Anandkumar, R., & Babu, S. R. (2018) · Progress in Additive Manufacturing · doi:10.1007/s40964-018-0069-8 · Cited by 28
Direct photoimmobilization of extraction disks on “green state” 3D printed devices
Calderilla, C., Maya, F., Cerdà, V., & Leal, L. O. (2019) · Talanta · doi:10.1016/j.talanta.2019.04.026 · Cited by 29
Sirjani, E., Cragg, P. J., & Dymond, M. K. (2019) · Chemical Data Collections · doi:10.1016/j.cdc.2019.100244 · Cited by 32
Assembly of Topographical Micropatterns with Optoelectronic Tweezers
Zhang, S., Zhai, Y., Peng, R., Shayegannia, M., Flood, A. G., Qu, J., Liu, X., Kherani, N. P., & Wheeler, A. R. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900669 · Cited by 28
Alo, O. A., Mauchline, D., & Otunniyi, I. O. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202101219 · Cited by 30
Fu, X., Lin, Y., Yue, X., XunMa, Hur, B.-Y., & Yue, X. (2022) · EAI/Springer Innovations in Communication and Computing · doi:10.1007/978-3-030-98671-1_6 · Cited by 34
A Flexible Capacitive Paper-Based Pressure Sensor Fabricated Using 3D Printing
Jia, W., Zhang, Q., Cheng, Y., Wang, J., Zhang, H., Sang, S., & Ji, J. (2022) · Chemosensors · doi:10.3390/chemosensors10100432 · Cited by 30
“In contrast, because of its convenience and large-scale production capability, 3D printing has become a promising technology for the development of flexible electronic products [23].”
BackgroundTan, J. Z. Y., Ávila-López, M. A., Jahanbakhsh, A., Lu, X., Bonilla‐Cruz, J., Lara‐Ceniceros, T. E., Andrésen, J. M., & Maroto‐Valer, M. M. (2023) · Journal of Materials Chemistry A · doi:10.1039/d2ta08922j · Cited by 28
3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review
Alsharif, A. A., Cucuri, N. S. M., Mishra, R., & El‐Atab, N. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201677 · Cited by 30
Filho, L. A. P., Paixão, T. R. L. C., Nordin, G. P., & Woolley, A. T. (2023) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-023-04862-w · Cited by 28
“In recent years, 3D printing has emerged as an attractive alternative for fluidic device fabrication because of its potential to dramatically speed up device development by reducing the fabrication part of the development cycle to the minutes’ timescale [9–17].”
Robinson, K. J., Coffey, J. W., Muller, D. A., Young, P. R., Kendall, M. A. F., Thurecht, K. J., Grøndahl, L., & Corrie, S. R. (2015) · Biointerphases · doi:10.1116/1.4932055 · Cited by 30
3D printing the pterygopalatine fossa: a negative space model of a complex structure
Bannon, R., Parihar, S., Skarparis, Y., Varsou, O., & Cezayirli, E. (2017) · Surgical and Radiologic Anatomy · doi:10.1007/s00276-017-1916-x · Cited by 29
“The material solidifies as it cools and fan-assisted cooling is often used to facilitate this process [7].”
BackgroundPersonalized Bioactive Nasal Supports for Postoperative Cleft Rhinoplasty
Boyer, C. J., Woerner, J. E., Galea, C., Gatlin, C. A., Ghali, G. E., Mills, D. K., Weisman, J. A., McGee, D. J., & Alexander, J. S. (2018) · Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.joms.2018.03.029 · Cited by 28
Calcagnile, P., Cacciatore, G., Demitri, C., Montagna, F., & Corcione, C. E. (2018) · Materials · doi:10.3390/ma11091578 · Cited by 33
Office Chromatography: Miniaturized All-in-One Open-Source System for Planar Chromatography
Fichou, D., & Morlock, G. E. (2018) · Analytical Chemistry · doi:10.1021/acs.analchem.8b02866 · Cited by 29
Dong, Y., Dong, T., Yang, Z., Luo, A., Hong, Z., Lao, G., Huang, H., & Fan, B. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.12.274 · Cited by 27
3D Printed Porous Cellulose Nanocomposite Hydrogel Scaffolds
Sultan, S., & Mathew, A. P. (2019) · Journal of Visualized Experiments · doi:10.3791/59401 · Cited by 28
Arivarasi, A., & Kumar, A. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2018-0115 · Cited by 27
3D printing with particles as feedstock materials
Zhang, J., Amini, N., Morton, D. A. V., & Hapgood, K. (2021) · Advanced Powder Technology · doi:10.1016/j.apt.2021.07.022 · Cited by 28
Chen, J.-R., Chen, J., & Su, C. (2022) · Talanta · doi:10.1016/j.talanta.2022.123237 · Cited by 28
Soft Mechanosensing via 3D Printing: A review
Cafiso, D., Lantean, S., Pirri, C. F., & Beccai, L. (2023) · Advanced Intelligent Systems · doi:10.1002/aisy.202200373 · Cited by 27
3D printing of maxillofacial prosthesis materials: Challenges and opportunities
Das, A., Awasthi, P., Jain, V., & Banerjee, S. S. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00282 · Cited by 27
3D Printing Technologies and Their Applications in Biomedical Science
Bakhtiar, S. M., Butt, H. A., Zeb, S., Quddusi, D. M., Gul, S., & Dilshad, E. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-804659-3.00010-5 · Cited by 36
Askanian, H., de Lima, D. M., Commereuc, S., & Verney, V. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0060 · Cited by 28
Şekeroğlu, M. Ö., Pekgor, M., Algin, A., Toros, T., Serin, E., Uzun, M., Çerit, G., Onat, T., & Ermiş, S. A. (2025) · Sensors · doi:10.3390/s25051453 · Cited by 35
Design and development of an efficient fluid mixing for 3D printed lab-on-a-chip
Agarwal, A., Salahuddin, A., Wang, H., & Ahamed, M. J. (2020) · Microsystem Technologies · doi:10.1007/s00542-020-04787-9 · Cited by 26
Welch, J. L., Xiang, J., Mackin, S., Perlman, S. M., Thorne, P. S., O’Shaughnessy, P. T., Strzelecki, B., Aubin, P. M., Ortiz-Hernández, M., & Stapleton, J. T. (2020) · Infection Control and Hospital Epidemiology · doi:10.1017/ice.2020.417 · Cited by 27
Irlam, R. C., Hughes, C., Parkin, M. C., Beardah, M. S., O'Donnell, M., Brabazon, D., & Barron, L. (2020) · Journal of Chromatography A · doi:10.1016/j.chroma.2020.461506 · Cited by 28
3D printing of biphasic inks: beyond single-scale architectural control
Cidonio, G., Costantini, M., Pierini, F., Scognamiglio, C., Agarwal, T., & Barbetta, A. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc02117f · Cited by 31
Lee, D., Kim, B., Park, C. H., Jeong, G., Park, S., Yoo, M., Yang, H.-S., & Lee, W. S. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00997 · Cited by 26
3D-printed solid-state electrolytes for electrochemical energy storage devices
Cheng, M., & Jiang, Y. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00355-7 · Cited by 27
Kołodziej, D., Sobczak, Ł., & Goryński, K. (2022) · Analytical Chemistry · doi:10.1021/acs.analchem.1c03672 · Cited by 27
Shinde, V. V., Taylor, G., Celestine, A. N., & Beckingham, B. S. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c01884 · Cited by 26
Overview of 3D and 4D Printing Techniques and their Emerging Applications in Medical Sectors
Kumar, R., & Kumar, S. (2022) · Current Materials Science · doi:10.2174/2666145416666221019105748 · Cited by 31
Gad, M. M., Alalawi, H., Akhtar, S., Alghamdi, R., Alghamdi, R., Al‐Jefri, A., & al‐Qarni, F. D. (2023) · European Journal of Dentistry · doi:10.1055/s-0042-1759885 · Cited by 26
“33,34 In a previous study done by Pham et al 23 have investigated the abrasion resistance of 3D-printed denture teeth (FormLabs Resin) in comparison with conventional prefabricated denture teeth and stated that 3D-printed resin exhibited superior abrasion resistance in similarity with fi ndings of…”
Sonogashira coupling in 3D-printed NMR cuvettes: synthesis and properties of arylnaphthylalkynes
Lederle, F., Meyer, F. S., Kaldun, C., Namyslo, J. C., & Hübner, E. G. (2017) · New Journal of Chemistry · doi:10.1039/c6nj03614g · Cited by 26
A novel three-dimensional-printed paranasal sinus–skull base anatomical model
Zhang, X.-D., Li, Z., Wu, Z., Lin, W., Lin, W., Lin, J., & Zhuang, L.-M. (2018) · European Archives of Oto-Rhino-Laryngology · doi:10.1007/s00405-018-5051-z · Cited by 26
Engineering of Removing Sacrificial Materials in 3D-Printed Microfluidics
Yin, P., Hu, B., Yi, L., Xiao, C., Cao, X., Zhao, L. Q., & Shi, H. (2018) · Micromachines · doi:10.3390/mi9070327 · Cited by 26
“Mostly, 3D printers fabricate microfluidics with three main methods: photopolymer inkjet printing [18–21], fused deposition modeling [22,23], or stereo lithography [24–26].”
MethodHeterogeneity Studies of Mammalian Cells for Bioproduction: From Tools to Application
Schmitz, J., Noll, T., & Grünberger, A. (2019) · Trends in biotechnology · doi:10.1016/j.tibtech.2018.11.007 · Cited by 28
Functional 3D Printed Polymeric Materials
Ortiz‐Acosta, D., & Moore, T. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.80686 · Cited by 35
Rapid Prototyping Using 3D Printing in Bioanalytical Research
Zhang, C., Bills, B. J., & Manicke, N. E. (2017) · Bioanalysis · doi:10.4155/bio-2016-0293 · Cited by 26
Corrosion behavior of selective laser melted 6061 aluminum alloy electrodes for aluminum-air battery
Ma, Y., Li, K., Li, C., Miao, X., Araki, T., & Wu, M. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233999 · Cited by 25
Approaches to open source 3-D printable probe positioners and micromanipulators for probe stations
Hietanen, I., Heikkinen, I. T. S., Savin, H. I., & Pearce, J. M. (2018) · HardwareX · doi:10.1016/j.ohx.2018.e00042 · Cited by 25
“RepRaps and their various commercial variants have obtained 3D printing qualities of interest to the scientific community and is now widely used to fabricate scientific hardware [6,7] including biological [8,9], biotechnological [10], chemical [11–15], nanotechnological [16], medical [17], materials [18], microfluidic…”
BackgroundCost-reduction strategies in massive genomics experiments
Li, H., Wu, K., Ruan, C., Pan, J., Wang, Y., & Long, H. (2019) · Marine Life Science & Technology · doi:10.1007/s42995-019-00013-2 · Cited by 25
Velázquez, J. S., Cavas, F., Bolarín, J. M., & ALIO, J. L. (2020) · Symmetry · doi:10.3390/sym12010151 · Cited by 25
“However, in all different collaborative platforms of medical research related with virtual models [30,31,69], we have not found any virtual models of healthy or keratoconus-diagnosed corneas.”
BackgroundSulerud, T., Sami, A. B., Li, G., Kloxin, A. M., Oakey, J. S., & Gatlin, J. C. (2020) · Molecular Biology of the Cell · doi:10.1091/mbc.e20-01-0088 · Cited by 25
“The 3D printer (MAX X27; Asiga) used a 3D printing method for microfabrication, named stereolithography (SL), which is based on digital light processing (DLP; Lu et al. , 2006; Gross et al. , 2014; Gong et al. , 2015; Ho et al. , 2015).”
Programming the microstructure of magnetic nanocomposites in DLP 3D printing
Lantean, S., Roppolo, I., Sangermano, M., Hayoun, M., Dammak, H., & Rizza, G. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102343 · Cited by 33
Biomedical applications of microfluidic devices: Achievements and challenges
Kenari, M. A., Ghomi, E. R., Kenari, A. A., Arabi, S. M. S., Deylami, J., & Ramakrishna, S. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5847 · Cited by 27
Rajendran, J., & Esfandyarpour, R. (2024) · Biomedical Materials & Devices · doi:10.1007/s44174-024-00226-9 · Cited by 34
“The G-code file is essential, as it communicates precise printing instructions to the 3D printer, detailing aspects such as the type of material to be used, extrusion rates, feed rates, and the specific pathways for material deposition [83].”
Tensile strengths of polyamide based 3D printed polymers in liquid nitrogen
la Cruz, P. D., Shoemake, E. D., Adam, P., & Leachman, J. (2015) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/102/1/012020 · Cited by 25
“Unlike FDM, SLS does not require scaffold support during the forming process, significantly saving on material cost; however, SLS models often suffer shrinkage and deformation from thermal expansion and cooling [4].”
BackgroundWavelength-Dependent Photochemical Stability of Photoinitiator-Derived Macromolecular Chain Termini
Lauer, A., Fast, D. E., Steinkoenig, J., Kelterer, A., Gescheidt, G., & Barner‐Kowollik, C. (2017) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00499 · Cited by 25
3D Bioprinting and Decellularized ECM-Based Biomaterials for in Vitro CV Tissue Engineering
Das, S., & Jang, J. (2018) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2018-0002 · Cited by 29
Advanced fabrication approaches to controlled delivery systems for epilepsy treatment
van Tienderen, G. S., Berthel, M., Yue, Z., Cook, M. J., Liu, X., Beirne, S., & Wallace, G. G. (2018) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2018.1517745 · Cited by 27
“techniques in biomedical applications, from (bone) tissue engineering to printing of anatomical models, over the last 30 years [47-49].”
BackgroundPrinting and mechanical characterization of cellulose nanofibril materials
Mariani, L. M., Johnson, W. R., Considine, J. M., & Turner, K. T. (2019) · Cellulose · doi:10.1007/s10570-019-02247-w · Cited by 26
Eisenmenger, L. B., Wiggins, R. H., Fults, D. W., & Huo, E. J. (2017) · World Neurosurgery · doi:10.1016/j.wneu.2017.08.026 · Cited by 24
Geng, Y., Wang, Z., Hu, X., Li, Y., Zhang, Q., Li, Y., Wang, R., & Zhang, L. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.10.041 · Cited by 25
Jovic, K., Nitsche, T., Lang, C., Blinco, J. P., Bruycker, K. D., & Barner‐Kowollik, C. (2019) · Polymer Chemistry · doi:10.1039/c9py00370c · Cited by 24
Ramirez, J. A., Ospina, V., Rozo, A. A., Viana, M. I., Ocampo, S., Restrepo, S., Araque, N. A. V., Paucar, C. G., & García, C. (2019) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2019.323 · Cited by 25
Keçili, S., & Tekin, H. C. (2020) · Biomicrofluidics · doi:10.1063/5.0003302 · Cited by 24
Daniyan, I. A., Mpofu, K., Daniyan, L., Fameso, F. O., & Oyesola, M. O. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05340-8 · Cited by 25
Wallace, N., Butt, B. B., Aleem, I. S., & Patel, R. (2020) · Clinical Spine Surgery A Spine Publication · doi:10.1097/bsd.0000000000001023 · Cited by 24
“Exclusion criteria included: (1) editorials, case reports, review articles, and studies without control group comparison; (2) cadaveric or animal studies; (3) manuscripts published in a language other than English; (4) manuscripts lacking desired outcome measures.”
BackgroundMethodWo, J., Huang, S., Wu, D., Zhu, J., Li, Z., & Yuan, F. (2020) · Journal of Applied Biomaterials & Functional Materials · doi:10.1177/2280800020934652 · Cited by 24
Belloti, J. C., Alves, B. V. P., Faloppa, F., Balbachevsky, D., Netto, N. A., & Tamaoki, M. J. S. (2021) · Injury · doi:10.1016/j.injury.2021.05.048 · Cited by 24
Metadata
- Authors
- Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Spence, Dana M.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-30
- Volume
- 86
- Issue
- 7
- Pages
- 3240-3253
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2043704558
- Cited by
- 1,746
- References
- 162
- Citations by year
- 2026: 58 · 2025: 93 · 2024: 130 · 2023: 141 · 2022: 152 · 2021: 154 · 2020: 167 · 2019: 187 · 2018: 224 · 2017: 192 · 2016: 141 · 2015: 83 · 2014: 23
- Type
- other
- Language
- en
- Open access
- closed
- Locations
- Analytical Chemistry (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Social Sciences › Education › Various Chemistry Research Topics
- Keywords
- 3D printing, additive manufacturing, biotechnology, chemical sciences, laboratory applications, printing technology, history of 3D printing, research laboratories, teaching laboratory
- MeSH terms
- Biotechnology, Chemistry, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.