Materials and Designs for Power Supply Systems in Skin-Interfaced Electronics
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
Recent advances in materials chemistry and composite materials design establish the foundations for classes of electronics with physical form factors that bridge the gap between soft biological organisms and rigid microsystems technologies. Skin-interfaced platforms of this type have broad utility in continuous clinical-grade monitoring of physiological status, with the potential to significantly lower the cost and increase the efficacy of modern health care. Development of materials and device designs for power supply systems in this context is critically important, and it represents a rapidly expanding focus of research in the chemical sciences. Reformulating conventional technologies into biocompatible platforms and co-integrating them into skin-interfaced systems demand innovative approaches in materials chemistry and engineering. In terms of physical properties, the resulting devices must offer levels of flexibility, stretchability, thickness, and mass density that approach those of the epidermis itself, while maintaining operational characteristics and mechanical durability for practical use outside of a laboratory or hospital. While nearly all commercially available components for energy storage and harvesting are rigid and planar, recent research provides options in devices that are biocompatible not only at the level of the constituent materials but also in terms of the mechanics and geometrical forms, with resulting capabilities for establishing stable, nonirritating, intimate interfaces to the skin for extended periods of time. This Account highlights the range of materials choices and associated device architectures for skin-interfaced power supply systems. The Account begins with an overview of the main design strategies, ranging from one-, two-, and three-dimensional engineered composite structures to active materials that are intrinsically stretchable. The following sections describe a broad collection of devices based on these concepts, starting with batteries and supercapacitors for storage and then photovoltaic, piezoelectric, triboelectric, and thermoelectric devices for harvesting. Representative examples highlight recent advances, with a focus on the relationship between the materials and the performance during deformation. A final section discusses the challenges and opportunities in this area. Continued efforts in fundamental chemical research will be critically important to progress in this emerging field of technology. For example, understanding the mechanisms by which physical deformations affect the intrinsic materials properties and the system-level performance requires further study. The development of stretchable and biocompatible solid electrolytes with high ionic conductivity is an example of a specific area of interest for energy storage devices. Here and in other storage and harvesting systems advanced materials are needed to provide robust barriers to environmental factors. Work to address these and other interesting challenges will demand multidisciplinary collaborations between chemists, materials scientists, bioengineers, and clinicians, all oriented toward establishing the foundations for technologies that could help to address global grand challenges in human health care.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Piezoelectricity of single-atomic-layer MoS2 for energy conversion and piezotronics
Wu, W., Wang, L., Li, Y., Zhang, F., Lin, L., Niu, S., Chenet, D., Zhang, X., Hao, Y., Heinz, T. F., et al. (2014) · Nature · doi:10.1038/nature13792 · Cited by 2,287
Xu, S., Zhang, Y., Cho, J., Lee, J., Huang, X., Jia, L., Fan, J. A., Su, Y., Su, J., Zhang, H., et al. (2013) · Nature Communications · doi:10.1038/ncomms2553 · Cited by 1,404
Self-citationPersano, L., Dagdeviren, C., Su, Y., Zhang, Y., Girardo, S., Pisignano, D., Huang, Y., & Rogers, J. A. (2013) · Nature Communications · doi:10.1038/ncomms2639 · Cited by 1,271
Self-citationConformal piezoelectric energy harvesting and storage from motions of the heart, lung, and diaphragm
Dagdeviren, C., Yang, B. D., Su, Y., Tran, P. L., Joe, P., Anderson, E., Xia, J., Doraiswamy, V., Dehdashti, B., Feng, X., et al. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1317233111 · Cited by 975
Self-citationHighly Self-Healable 3D Microsupercapacitor with MXene–Graphene Composite Aerogel
Yue, Y., Liu, N., Ma, Y., Wang, S., Liu, W., Luo, C., Zhang, H., Cheng, F., Rao, J., Hu, X., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07528 · Cited by 736
Self-assembled three dimensional network designs for soft electronics
Jang, K.-I., Li, K., Chung, H. U., Xu, S., Jung, H. N., Yang, Y., Kwak, J. W., Jung, H. H., Song, J., Yang, C., et al. (2017) · Nature Communications · doi:10.1038/ncomms15894 · Cited by 445
Self-citationHuang, Y., Ip, W. S., Lau, Y. Y., Sun, J., Zeng, J., Yeung, N. S. S., Ng, W. S., Li, H., Pei, Z., Xue, Q., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b03322 · Cited by 352
Oh, J. Y., Lee, J. H., Han, S. W., Chae, S. S., Bae, E. J., Kang, Y. H., Choi, W. J., Cho, S. Y., Lee, J.-O., Baik, H. K., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03813h · Cited by 289
Kumar, R., Shin, J., Yin, L., You, J., Meng, Y. S., & Wang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602096 · Cited by 261
Stretchable Ferroelectric Nanoribbons with Wavy Configurations on Elastomeric Substrates
Feng, X., Yang, B. D., Liu, Y., Wang, Y., Dagdeviren, C., Liu, Z., Carlson, A., Li, J., Huang, Y., & Rogers, J. A. (2011) · ACS Nano · doi:10.1021/nn200477q · Cited by 219
Self-citation
Cited by
Smart Textiles for Electricity Generation
Chen, G., Li, Y., Bick, M., & Chen, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00821 · Cited by 931
Organic Photodetectors for Next‐Generation Wearable Electronics
Chow, P. C. Y., & Someya, T. (2020) · Advanced Materials · doi:10.1002/adma.201902045 · Cited by 779
Yu, Y., Nassar, J., Xu, C., Min, J., Yang, Y., Dai, A., Doshi, R., Huang, A., Song, Y., Gehlhar, R., et al. (2020) · Science Robotics · doi:10.1126/scirobotics.aaz7946 · Cited by 655
Wireless battery-free wearable sweat sensor powered by human motion
Song, Y., Min, J., Yu, Y., Wang, H., Yang, Y., Zhang, H., & Gao, W. (2020) · Science Advances · doi:10.1126/sciadv.aay9842 · Cited by 652
Flexible Hybrid Electronics for Digital Healthcare
Ma, Y., Zhang, Y., Cai, S., Han, Z., Liu, X., Wang, F., Cao, Y., Wang, Z., Li, H., Chen, Y., et al. (2020) · Advanced Materials · doi:10.1002/adma.201902062 · Cited by 620
Metadata
- Authors
- Li, J., Zhao, J., & Rogers, J. A.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-12-10
- Volume
- 52
- Issue
- 1
- Pages
- 53-62
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2904468583
- Cited by
- 71
- References
- 10
- FWCI
- 3.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.