Dynamic Coordination Chemistry Enables Free Directional Printing of Biopolymer Hydrogel
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
Three-dimensional (3D) printing is a promising technology to develop customized biomaterials in regenerative medicine. However, for the majority of printable biomaterials (bioinks) there is always a compromise between excellent printability of fluids and good mechanical properties of solids. Three-dimensional printing of soft materials based on the transition from a fluid to gel state is challenging because of the difficulties to control such transition as well as to maintain uniform conditions three-dimensionally. To solve these challenges, a facile chemical strategy for the development of a novel hydrogel bioink with shear-thinning and self-healing properties based on dynamic metal–ligand coordination bonds is presented. The noncovalent cross-linking allows easy extrusion of the bioink from a reservoir without changing of its bulk mechanical properties. The soft hydrogel can avoid deformation and collapse using omnidirectional embedding of the printable hydrogel into a support gel bath sharing the same cross-linking chemistry. After combination with photoinitiated covalent cross-linking, it enables manufacturing of hydrogel structures with complex shapes and precise location of chemically attached ligands. Living cells can be entrapped in the new printable hydrogel and survive the following in situ photo-cross-linking. The presented printable hydrogel material expands the existing tool-box of bioinks for generation of in vitro 3D tissue-like structures and direct in vivo 3D printing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822
Wylie, R. G., Ahsan, S., Aizawa, Y., Maxwell, K. L., Morshead, C. M., & Shoichet, M. S. (2011) · Nature Materials · doi:10.1038/nmat3101 · Cited by 480
Robust, self-healing hydrogels synthesised from catechol rich polymers
Yavvari, P. S., & Srivastava, A. (2015) · Journal of Materials Chemistry B · doi:10.1039/c4tb01307g · Cited by 126
Cited by
Soft Materials by Design: Unconventional Polymer Networks Give Extreme Properties
Zhao, X., Chen, X., Yuk, H., Lin, S., Liu, X., & Parada, G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01088 · Cited by 1,161
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
Biofabrication strategies for 3D in vitro models and regenerative medicine
Moroni, L., Burdick, J. A., Highley, C., Lee, S. J., Morimoto, Y., Takeuchi, S., & Yoo, J. J. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0006-y · Cited by 753
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
Zhang, K., Feng, Q., Fang, Z., Gu, L., & Bian, L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00071 · Cited by 394
Supramolecular engineering of hydrogels for drug delivery
Bernhard, S., & Tibbitt, M. W. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.02.002 · Cited by 363
Shi, L., Ding, P., Wang, Y., Zhang, Y., Ossipov, D., & Hilborn, J. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201800837 · Cited by 303
Self-citationThe rheology of direct and suspended extrusion bioprinting
Cooke, M. E., & Rosenzweig, D. H. (2021) · APL Bioengineering · doi:10.1063/5.0031475 · Cited by 284
Recent advances in polysaccharide‐based hydrogels for synthesis and applications
Li, Z., & Lin, Z. (2021) · Aggregate · doi:10.1002/agt2.21 · Cited by 275
Shi, L., Wang, F., Zhu, W., Xu, Z., Fuchs, S., Hilborn, J., Zhu, L., Ma, Q., Wang, Y., Weng, X., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700591 · Cited by 270
Self-citationPhysical and Chemical Factors Influencing the Printability of Hydrogel-based Extrusion Bioinks
Lee, S. C., Gillispie, G., Prim, P., & Lee, S. J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00015 · Cited by 255
Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors.
Luo, Y., Li, J., Ding, Q., Wang, H., Liu, C., & Wu, J. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01109-2 · Cited by 236
Metadata
- Authors
- Shi, L., Carstensen, H., Hölzl, K., Lunzer, M., Li, H., Hilborn, J., Ovsianikov, A., & Ossipov, D. A.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-06-30
- Volume
- 29
- Issue
- 14
- Pages
- 5816-5823
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2625985239
- Cited by
- 142
- References
- 10
- FWCI
- 6.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.