The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Capacity Fade in Solid-State Batteries: Interphase Formation and Chemomechanical Processes in Nickel-Rich Layered Oxide Cathodes and Lithium Thiophosphate Solid Electrolytes
Abstract
All-solid-state lithium ion batteries may become long-term, stable, high-performance energy storage systems for the next generation of electric vehicles and consumer electronics, depending on the compatibility of electrode materials and suitable solid electrolytes. Nickel-rich layered oxides are nowadays the benchmark cathode materials for conventional lithium ion batteries because of their high storage capacity and the resulting high energy density, and their use in solid-state systems is the next necessary step. In this study, we present the successful implementation of a Li[Ni,Co,Mn]O 2 material with high nickel content (LiNi 0.8 Co 0.1 Mn 0.1 O 2, NCM-811) in a bulk-type solid-state battery with β-Li 3 PS 4 as a sulfide-based solid electrolyte. We investigate the interface behavior at the cathode and demonstrate the important role of the interface between the active materials and the solid electrolyte for the battery performance. A passivating cathode/electrolyte interphase layer forms upon charging and leads to an irreversible first cycle capacity loss, corresponding to a decomposition of the sulfide electrolyte. In situ electrochemical impedance spectroscopy and X-ray photoemission spectroscopy are used to monitor this formation. We demonstrate that most of the interphase formation takes place in the first cycle, when charging to potentials above 3.8 V vs Li + /Li. The resulting overvoltage of the passivating layer is a detrimental factor for capacity retention. In addition to the interfacial decomposition, the chemomechanical contraction of the active material upon delithiation causes contact loss between the solid electrolyte and active material particles, further increasing the interfacial resistance and capacity loss. These results highlight the critical role of (electro-)chemo-mechanical effects in solid-state batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Self-citationHigh-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Zhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
Interface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
Jung, S., Gwon, H., Hong, J., Park, K., Seo, D., Kim, H., Hyun, J., Yang, W., & Kang, K. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300787 · Cited by 1,124
Nanostructured high-energy cathode materials for advanced lithium batteries
Sun, Y.-K., Chen, Z., Noh, H.-J., Lee, D.-J., Jung, H.-G., Ren, Y., Wang, S., Yoon, C. S., Myung, S.-T., & Amine, K. (2012) · Nature Materials · doi:10.1038/nmat3435 · Cited by 1,093
Sulfide Solid Electrolyte with Favorable Mechanical Property for All-Solid-State Lithium Battery
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2013) · Scientific Reports · doi:10.1038/srep02261 · Cited by 1,051
Zhu, Y., He, X., & Mo, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08574h · Cited by 1,045
Ohta, N., Takada, K., Zhang, L., Ma, R., Osada, M., & Sasaki, T. (2006) · Advanced Materials · doi:10.1002/adma.200502604 · Cited by 899
Wenzel, S., Randau, S., Leichtweiß, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00610 · Cited by 854
Self-citationKondrakov, A. O., Schmidt, A., Xu, J., Geßwein, H., Mönig, R., Hartmann, P., Sommer, H., Brezesinski, T., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12885 · Cited by 701
Self-citationSakuda, A., Hayashi, A., & Tatsumisago, M. (2010) · Chemistry of Materials · doi:10.1021/cm901819c · Cited by 651
Zhang, W., Weber, D. A., Weigand, H., Arlt, T., Manke, I., Schröder, D., Koerver, R., Leichtweiss, T., Hartmann, P., Zeier, W. G., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01137 · Cited by 538
Self-citationStudy of the Failure Mechanisms of LiNi0.8Mn0.1Co0.1O2Cathode Material for Lithium Ion Batteries
Li, J., Downie, L. E., Ma, L., Qiu, W., & Dahn, J. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1011507jes · Cited by 516
Wenzel, S., Weber, D. A., Leichtweiß, T., Busche, M. R., Sann, J., & Janek, J. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.11.034 · Cited by 505
Self-citationPark, K., Yu, B.-C., Jung, J.-W., Li, Y., Zhou, W., Gao, H., Son, S., & Goodenough, J. B. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03870 · Cited by 463
Interfacial modification for high-power solid-state lithium batteries
Takada, K., Ohta, N., Zhang, L., Fukuda, K., Sakaguchi, I., Ma, R., Osada, M., & Sasaki, T. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.02.017 · Cited by 376
Redox activity of argyrodite Li6PS5Cl electrolyte in all-solid-state Li-ion battery: An XPS study
Auvergniot, J., Cassel, A., Foix, D., Viallet, V., Seznec, V., & Dedryvère, R. (2017) · Solid State Ionics · doi:10.1016/j.ssi.2016.11.029 · Cited by 367
Zhang, W., Schröder, D., Arlt, T., Manke, I., Koerver, R., Pinedo, R., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02730c · Cited by 348
Self-citationOh, G., Hirayama, M., Kwon, O., Suzuki, K., & Kanno, R. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04940 · Cited by 278
Wenzel, S., Leichtweiss, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10119 · Cited by 275
Self-citationBuschmann, H., Berendts, S., Mogwitz, B., & Janek, J. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.094 · Cited by 252
Self-citationEshetu, G. G., Grugeon, S., Laruelle, S., Boyanov, S., Lecocq, A., Bertrand, J.-P., & Marlair, G. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51315g · Cited by 249
Structural Insights and 3D Diffusion Pathways within the Lithium Superionic Conductor Li10GeP2S12
Weber, D. A., Senyshyn, A., Weldert, K. S., Wenzel, S., Zhang, W., Kaiser, R., Berendts, S., Janek, J., & Zeier, W. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02424 · Cited by 215
Self-citationDietrich, C., Sadowski, M., Sicolo, S., Weber, D. A., Sedlmaier, S. J., Weldert, K. S., Indris, S., Albe, K., Janek, J., & Zeier, W. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04175 · Cited by 148
Self-citationLattice volume change during charge/discharge reaction and cycle performance of Li[NixCoyMnz]O2
Ishidzu, K., Yoshihiro, O. K. A., & Nakamura, T. (2016) · Solid State Ionics · doi:10.1016/j.ssi.2016.01.009 · Cited by 130
Visbal, H., Aihara, Y., Ito, S., Watanabe, T., Park, Y., & Doo, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.088 · Cited by 127
Multi-Scale Mechanical Behavior of the Li3PS4 Solid-Phase Electrolyte
Baranowski, L. L., Heveran, C. M., Ferguson, V. L., & Stoldt, C. R. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06612 · Cited by 78
Cited by
Fundamentals of inorganic solid-state electrolytes for batteries
Famprikis, T., Canepa, P., Dawson, J. A., Islam, M. S., & Masquelier, C. (2019) · Nature Materials · doi:10.1038/s41563-019-0431-3 · Cited by 2,525
Designing solid-state electrolytes for safe, energy-dense batteries
Zhao, Q., Stalin, S., Zhao, C.-Z., & Archer, L. A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0165-5 · Cited by 2,372
Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries
Wu, F., Maier, J., & Yu, Y. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00863e · Cited by 2,229
Lee, Y.-G., Fujiki, S., Jung, C., Suzuki, N., Yashiro, N., Omoda, R., Ko, D.-S., Shiratsuchi, T., Sugimoto, T., Ryu, S., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0575-z · Cited by 1,708
Chen, R., Li, Q., Yu, X., Chen, L., & Li, H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00268 · Cited by 1,678
Metadata
- Authors
- Koerver, R., Aygün, I., Leichtweiß, T., Dietrich, C., Zhang, W., Binder, J. O., Hartmann, P., Zeier, W. G., & Janek, J.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-06-23
- Volume
- 29
- Issue
- 13
- Pages
- 5574-5582
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2622261719
- Cited by
- 1,020
- References
- 33
- FWCI
- 27.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.