The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Capacity Fading of Ni-Rich Li[NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation?
Abstract
Ni-rich Li[Ni x Co y Mn 1– x – y ]O 2 cathodes ( x = 0.6, 0.8, 0.9, and 0.95) were tested to characterize the capacity fading mechanism of extremely rich Ni compositions. Increasing the Ni fraction in the cathode delivered a higher discharge capacity (192.9 mA h g –1 for Li[Ni 0.6 Co 0.2 Mn 0.2 ]O 2 versus 235.0 mA h g –1 for Li[Ni 0.95 Co 0.025 Mn 0.025 ]O 2 ); however, the cycling stability was substantially reduced. Li[Ni 0.6 Co 0.2 Mn 0.2 ]O 2 and Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 retained more than 95% of their respective initial capacities after 100 cycles, while the capacity retention of Li[Ni 0.9 Co 0.05 Mn 0.05 ]O 2 and Li[Ni 0.95 Co 0.025 Mn 0.025 ]O 2 was limited to 85% during the same cycling period. The relatively inferior cycling stability of Li[Ni x Co y Mn 1– x – y ]O 2 with x > 0.8 is attributed to the phase transition near the charge-end, causing an abrupt anisotropic shrinkage (or expansion during discharge), which was suppressed for compositions of x < 0.8. Residual stress stemming from the phase transition destabilized the internal microcracks and allowed the microcracks to propagate to the surface, providing channels for electrolyte penetration and subsequent degradation of the exposed internal surfaces formed by the microcracks. Further developments in particle morphology are required to dissipate the intrinsic lattice strain, stabilize the surface, and modify the composition to attain a satisfactory long-term cycling stability, and hence battery life.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lithium−Air Battery: Promise and Challenges
Girishkumar, G., McCloskey, B., Luntz, A. C., Swanson, S., & Wilcke, W. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1005384 · Cited by 2,528
Noh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
Self-citationElectrochemistry and Structural Chemistry of LiNiO2 (R3m) for 4 Volt Secondary Lithium Cells
Ohzuku, T., Ueda, A., & Nagayama, M. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220730 · Cited by 1,384
Myung, S.-T., Maglia, F., Park, K.-J., Yoon, C. S., Lamp, P., Kim, S.-J., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00594 · Cited by 1,382
Self-citationJung, S., Gwon, H., Hong, J., Park, K., Seo, D., Kim, H., Hyun, J., Yang, W., & Kang, K. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300787 · Cited by 1,124
Self-citationBak, S.-M., Hu, E., Zhou, Y., Yu, X., Senanayake, S. D., Cho, S.-J., Kim, K.-B., Chung, K. Y., Yang, X.-Q., & Nam, K.-W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506712c · Cited by 1,010
Future generations of cathode materials: an automotive industry perspective
Andre, D., Kim, S.-J., Lamp, P., Lux, S. F., Maglia, F., Paschos, O., & Stiaszny, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00361j · Cited by 806
Kondrakov, A. O., Schmidt, A., Xu, J., Geßwein, H., Mönig, R., Hartmann, P., Sommer, H., Brezesinski, T., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12885 · Cited by 701
Study of the Failure Mechanisms of LiNi0.8Mn0.1Co0.1O2Cathode Material for Lithium Ion Batteries
Li, J., Downie, L. E., Ma, L., Qiu, W., & Dahn, J. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1011507jes · Cited by 516
Watanabe, S., Kinoshita, M., Hosokawa, T., Morigaki, K., & Nakura, K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.018 · Cited by 465
Sun, H.-H., & Manthiram, A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03268 · Cited by 465
Miller, D. J., Proff, C., Wen, J., Abraham, D. P., & Bareño, J. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300015 · Cited by 422
de Biasi, L., Kondrakov, A. O., Geßwein, H., Brezesinski, T., Hartmann, P., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06363 · Cited by 374
Intrinsic Origins of Crack Generation in Ni-rich LiNi0.8Co0.1Mn0.1O2 Layered Oxide Cathode Material
Lim, J.-M., Hwang, T., Kim, D., Park, M.-S., Cho, K., & Cho, M. (2017) · Scientific Reports · doi:10.1038/srep39669 · Cited by 305
Cho, W., Kim, S.-M., Song, J. H., Yim, T., Woo, S.-G., Lee, K.-W., Kim, J.-S., & Kim, Y.-J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.128 · Cited by 302
Choi, J., & Manthiram, A. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1954927 · Cited by 291
Wu, L., Nam, K.-W., Wang, X., Zhou, Y., Zheng, J.-C., Yang, X.-Q., & Zhu, Y. (2011) · Chemistry of Materials · doi:10.1021/cm201452q · Cited by 245
Watanabe, S., Kinoshita, M., Hosokawa, T., Morigaki, K., & Nakura, K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.103 · Cited by 224
Lee, K.-S., Myung, S., Amine, K., Yashiro, H., & Sun, Y. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2769831 · Cited by 212
Self-citationCapacity-Fading Mechanisms of LiNiO[sub 2]-Based Lithium-Ion Batteries
Muto, S., Sasano, Y., Tatsumi, K., Sasaki, T., Horibuchi, K., Takeuchi, Y., & Ukyo, Y. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3076137 · Cited by 212
Kim, U.-H., Myung, S.-T., Yoon, C. S., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00613 · Cited by 203
Self-citationLim, B., Yoon, S., Park, K., Yoon, C. S., Kim, S., Lee, J. J., & Sun, Y. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501430 · Cited by 144
Self-citationLattice volume change during charge/discharge reaction and cycle performance of Li[NixCoyMnz]O2
Ishidzu, K., Yoshihiro, O. K. A., & Nakamura, T. (2016) · Solid State Ionics · doi:10.1016/j.ssi.2016.01.009 · Cited by 130
Hua, C., Du, K., Tan, C., Peng, Z., Cao, Y., & Hu, G. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.06.049 · Cited by 56
Noh, H.-J., Ju, J.-W., & Sun, Y. (2013) · ChemSusChem · doi:10.1002/cssc.201300379 · Cited by 43
Self-citationYoon, S., Park, K., Lim, B., Yoon, C. S., & Sun, Y. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0101502jes · Cited by 33
Self-citationLiu, J., Wang, J., Xia, Y., Zhou, X., Saixi, Y., & Liu, Z. (2011) · Materials Research Bulletin · doi:10.1016/j.materresbull.2011.11.058 · Cited by 19
Cited by
Enabling High-Voltage Lithium-Metal Batteries under Practical Conditions
Ren, X., Zou, L., Cao, X., Engelhard, M. H., Liu, W., Burton, S. D., Lee, H., Niu, C., Matthews, B. E., Zhu, Z., et al. (2019) · Joule · doi:10.1016/j.joule.2019.05.006 · Cited by 1,092
Fast Charging of Lithium‐Ion Batteries: A Review of Materials Aspects
Weiss, M., Ruess, R., Kasnatscheew, J., Levartovsky, Y., Levy, N. R., Minnmann, P., Stolz, L., Waldmann, T., Wohlfahrt‐Mehrens, M., Aurbach, D., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101126 · Cited by 1,055
Lithium–Oxygen Batteries and Related Systems: Potential, Status, and Future
Kwak, W.-J., Rosy, Sharon, D., Xia, C., Kim, H., Johnson, L. R., Bruce, P. G., Nazar, L. F., Sun, Y.-K., Frimer, A. A., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00609 · Cited by 1,009
Self-citationReversible planar gliding and microcracking in a single-crystalline Ni-rich cathode
Bi, Y., Tao, J., Wu, Y., Li, L., Xu, Y., Hu, E., Wu, B., Hu, J., Wang, C., Zhang, J.-G., et al. (2020) · Science · doi:10.1126/science.abc3167 · Cited by 889
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Metadata
- Authors
- Ryu, H.-H., Park, K.-J., Yoon, C. S., & Sun, Y.-K.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-02-05
- Volume
- 30
- Issue
- 3
- Pages
- 1155-1163
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2787322343
- Cited by
- 1,629
- References
- 27
- FWCI
- 48.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.