The DOI matches its Crossref record; 412 of the 412 references it cites were found in a registry or an index.
Polymers for 3D Printing and Customized Additive Manufacturing
Open accessAbstract
Additive manufacturing (AM) alias 3D printing translates computer-aided design (CAD) virtual 3D models into physical objects. By digital slicing of CAD, 3D scan, or tomography data, AM builds objects layer by layer without the need for molds or machining. AM enables decentralized fabrication of customized objects on demand by exploiting digital information storage and retrieval via the Internet. The ongoing transition from rapid prototyping to rapid manufacturing prompts new challenges for mechanical engineers and materials scientists alike. Because polymers are by far the most utilized class of materials for AM, this Review focuses on polymer processing and the development of polymers and advanced polymer systems specifically for AM. AM techniques covered include vat photopolymerization (stereolithography), powder bed fusion (SLS), material and binder jetting (inkjet and aerosol 3D printing), sheet lamination (LOM), extrusion (FDM, 3D dispensing, 3D fiber deposition, and 3D plotting), and 3D bioprinting. The range of polymers used in AM encompasses thermoplastics, thermosets, elastomers, hydrogels, functional polymers, polymer blends, composites, and biological systems. Aspects of polymer design, additives, and processing parameters as they relate to enhancing build speed and improving accuracy, functionality, surface finish, stability, mechanical properties, and porosity are addressed. Selected applications demonstrate how polymer-based AM is being exploited in lightweight engineering, architecture, food processing, optics, energy technology, dentistry, drug delivery, and personalized medicine. Unparalleled by metals and ceramics, polymer-based AM plays a key role in the emerging AM of advanced multifunctional and multimaterial systems including living biological systems as well as life-like synthetic systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–400 of 412
Angiogenic and inflammatory response to biodegradable scaffolds in dorsal skinfold chambers of mice
Rücker, M., Laschke, M. W., Junker, D., Carvalho, C., Schramm, A., Mülhaupt, R., Gellrich, N.-C., & Menger, M. D. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.05.033 · Cited by 232
Self-citationPolymer powders for selective laser sintering (SLS)
Schmid, M., Amado, A., & Wegener, K. (2015) · AIP Conference Proceedings · doi:10.1063/1.4918516 · Cited by 231
Cao, T., Ho, K.-H., & Teoh, S.-H. (2003) · Tissue Engineering · doi:10.1089/10763270360697012 · Cited by 231
Recycling of polyamide 12 based powders in the laser sintering process
Dotchev, K., & Yusoff, W. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910960299 · Cited by 229
Biofabrication: an overview of the approaches used for printing of living cells
Ferris, C. J., Gilmore, K. G., Wallace, G. G., & in het Panhuis, M. (2013) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-013-4853-6 · Cited by 227
Three-dimensional drug printing: A structured review
Ursan, I. D., Chiu, L., & Pierce, A. (2013) · Journal of the American Pharmacists Association · doi:10.1331/japha.2013.12217 · Cited by 227
3D Printing Gets a Boost and Opportunities with Polymer Materials
Hofmann, M. (2014) · ACS Macro Letters · doi:10.1021/mz4006556 · Cited by 225
Towards organ printing: engineering an intra-organ branched vascular tree
Visconti, R. P., Kasyanov, V., Gentile, C., Zhang, J., Markwald, R. R., & Mironov, V. (2010) · Expert Opinion on Biological Therapy · doi:10.1517/14712590903563352 · Cited by 224
Two-photon polymerisation for three-dimensional micro-fabrication
Wu, S., Serbin, J., & Gu, M. (2006) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2006.03.004 · Cited by 222
Ha, M., Seo, J.-W. T., Prabhumirashi, P. L., Zhang, W., Geier, M. L., Renn, M. J., Kim, C. H., Hersam, M. C., & Frisbie, C. D. (2013) · Nano Letters · doi:10.1021/nl3038773 · Cited by 222
Rapid sub-diffraction-limit laser micro/nanoprocessing in a threshold material system
Tanaka, T., Sun, H.-B., & Kawata, S. (2002) · Applied Physics Letters · doi:10.1063/1.1432450 · Cited by 216
Ren, X., Shen, J., Ghaedizadeh, A., Tian, H., & Min Xie, Y. (2015) · Smart Materials and Structures · doi:10.1088/0964-1726/24/9/095016 · Cited by 208
Acrylic-based resin with favorable properties for three-dimensional two-photon polymerization
Baldacchini, T., LaFratta, C. N., Farrer, R. A., Teich, M. C., Saleh, B. E. A., Naughton, M. J., & Fourkas, J. T. (2004) · Journal of Applied Physics · doi:10.1063/1.1728296 · Cited by 207
3D Fiber‐Deposited Electrospun Integrated Scaffolds Enhance Cartilage Tissue Formation
Moroni, L., Schotel, R., Hamann, D., de Wijn, J. R., & van Blitterswijk, C. A. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200601158 · Cited by 205
Lithography‐Based Additive Manufacturing of Cellular Ceramic Structures
Felzmann, R., Gruber, S., Mitteramskogler, G., Tesavibul, P., Boccaccini, A. R., Liska, R., & Stampfl, J. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201200010 · Cited by 203
Self-citation3D food printing—An innovative way of mass customization in food fabrication
Sun, J., Peng, Z., Yan, L., Y. H. Fuh, J., & Hong, G. S. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2015.01.006 · Cited by 202
3D-Printed Wood: Programming Hygroscopic Material Transformations
Correa, D., Papadopoulou, A., Guberan, C., Jhaveri, N., Reichert, S., Menges, A., & Tibbits, S. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0022 · Cited by 202
4D Printing: dawn of an emerging technology cycle
Pei, E. (2014) · Assembly Automation · doi:10.1108/aa-07-2014-062 · Cited by 199
Food Layered Manufacture: A new process for constructing solid foods
Wegrzyn, T. F., Golding, M., & Archer, R. H. (2012) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2012.04.006 · Cited by 199
Synthesis of carbonated hydroxyapatite nanospheres through nanoemulsion
Zhou, W. Y., Wang, M., Cheung, W. L., Guo, B. C., & Jia, D. M. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3156-9 · Cited by 199
Near-IR Two-Photon Photoinitiated Polymerization Using a Fluorone/Amine Initiating System
Belfield, K. D., Ren, X., Van Stryland, E. W., Hagan, D. J., Dubikovsky, V., & Miesak, E. J. (2000) · Journal of the American Chemical Society · doi:10.1021/ja991990v · Cited by 194
Elastic Fully Three‐dimensional Microstructure Scaffolds for Cell Force Measurements
Klein, F., Striebel, T., Fischer, J., Jiang, Z., Franz, C. M., von Freymann, G., Wegener, M., & Bastmeyer, M. (2010) · Advanced Materials · doi:10.1002/adma.200902515 · Cited by 192
120 nm resolution and 55 nm structure size in STED-lithography
Wollhofen, R., Katzmann, J., Hrelescu, C., Jacak, J., & Klar, T. A. (2013) · Optics Express · doi:10.1364/oe.21.010831 · Cited by 192
Inorganic–organic hybrid materials for application in optical devices
Houbertz, R., Domann, G., Cronauer, C., et al. (2003) · Thin Solid Films · doi:10.1016/s0040-6090(03)00982-9 · Cited by 191
3D Printed Programmable Release Capsules
Gupta, M. K., Meng, F., Johnson, B. N., Kong, Y. L., Tian, L., Yeh, Y.-W., Masters, N., Singamaneni, S., & McAlpine, M. C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01688 · Cited by 190
ORMOCER®s for Optical Interconnection Technology
Buestrich, R., Kahlenberg, F., Popall, M., Dannberg, P., Müller-Fiedler, R., & Rösch, O. (2001) · Journal of Sol-Gel Science and Technology · doi:10.1023/a:1008755607488 · Cited by 189
Three-Dimensional Printing in Pharmaceutics: Promises and Problems
Yu, D. G., Zhu, L.-M., Branford-White, C. J., & Yang, X. L. (2008) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21284 · Cited by 187
Processing of 45S5 Bioglass® by lithography-based additive manufacturing
Tesavibul, P., Felzmann, R., Gruber, S., Liska, R., Thompson, I., Boccaccini, A. R., & Stampfl, J. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.01.019 · Cited by 186
Self-citationEffects of processing conditions on short TLCP fiber reinforced FDM parts
Gray, R. W., Baird, D. G., & Helge Bøhn, J. (1998) · Rapid Prototyping Journal · doi:10.1108/13552549810197514 · Cited by 183
Laser Photofabrication of Cell-Containing Hydrogel Constructs
Ovsianikov, A., Mühleder, S., Torgersen, J., Li, Z., Qin, X.-H., Van Vlierberghe, S., Dubruel, P., Holnthoner, W., Redl, H., Liska, R., et al. (2014) · Langmuir · doi:10.1021/la402346z · Cited by 182
Self-citationSimpson, R. L., Wiria, F. E., Amis, A. A., Chua, C. K., Leong, K. F., Hansen, U. N., Chandrasekaran, M., & Lee, M. W. (2008) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30839 · Cited by 181
Li, Z., Pucher, N., Cicha, K., Torgersen, J., Ligon, S. C., Ajami, A., Husinsky, W., Rosspeintner, A., Vauthey, E., Naumov, S., et al. (2013) · Macromolecules · doi:10.1021/ma301770a · Cited by 181
Self-citationPardo, L., Wilson, W. C., & Boland, T. (2002) · Langmuir · doi:10.1021/la026171u · Cited by 180
Bioprinting of Thermoresponsive Hydrogels for Next Generation Tissue Engineering: A Review
Suntornnond, R., An, J., & Chua, C. K. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600266 · Cited by 180
Influence of building strategies on the accuracy of parts in selective laser sintering
Senthilkumaran, K., Pandey, P. M., & Rao, P. V. M. (2009) · Materials & Design · doi:10.1016/j.matdes.2009.01.009 · Cited by 179
Li, L., & Fourkas, J. T. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70130-x · Cited by 179
Model of the selective laser sintering of bisphenol-A polycarbonate
Nelson, J. C., Xue, S., Barlow, J. W., Beaman, J. J., Marcus, H. L., & Bourell, D. L. (1993) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00022a014 · Cited by 177
Teo, E. Y., Ong, S.-Y., Khoon Chong, M. S., Zhang, Z., Lu, J., Moochhala, S., Ho, B., & Teoh, S.-H. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.089 · Cited by 176
Athreya, S. R., Kalaitzidou, K., & Das, S. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.12.028 · Cited by 175
Advances in three-dimensional rapid prototyping of microfluidic devices for biological applications
O’Neill, P., Azouz, A. B., Vázquez, M., Liu, J., Marczak, S. P., Slouka, Z., Chang, H., Diamond, D., & Brabazon, D. (2014) · Biomicrofluidics · doi:10.1063/1.4898632 · Cited by 174
Curodeau, A., Sachs, E., & Caldarise, S. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200009)53:5<525::aid-jbm12>3.0.co;2-1 · Cited by 173
Micro‐scale Truss Structures formed from Self‐Propagating Photopolymer Waveguides
Jacobsen, A. J., Barvosa‐Carter, W., & Nutt, S. (2007) · Advanced Materials · doi:10.1002/adma.200700797 · Cited by 172
Clinical microneedle injection of methyl nicotinate: stratum corneum penetration
Sivamani, R. K., Stoeber, B., Wu, G. C., Zhai, H., Liepmann, D., & Maibach, H. (2005) · Skin Research and Technology · doi:10.1111/j.1600-0846.2005.00107.x · Cited by 171
Rapid Prototyping for Biomedical Engineering: Current Capabilities and Challenges
Lantada, A. D., & Morgado, P. L. (2012) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071811-150112 · Cited by 171
Novel drug delivery devices for providing linear release profiles fabricated by 3DP
Yu, D.-G., Branford-White, C., Ma, Z.-H., Zhu, L.-M., Li, X.-Y., & Yang, X.-L. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2008.12.008 · Cited by 170
Selective laser sintering of ultra high molecular weight polyethylene for clinical applications
Rimell, J. T., & Marquis, P. M. (2000) · Journal of Biomedical Materials Research · Cited by 168
Anisotropy of Photopolymer Parts Made by Digital Light Processing
Monzón, M., Ortega, Z., Hernández, A., Paz, R., & Ortega, F. (2017) · Materials · doi:10.3390/ma10010064 · Cited by 168
Koch, L., Gruene, M., Unger, C., & Chichkov, B. (2013) · Current Pharmaceutical Biotechnology · doi:10.2174/1389201011314010012 · Cited by 166
Photopolymerization: Fundamentals and Applications
Scranton, A. B., Bowman, C. N., & Peiffer, R. W. (1997) · ACS symposium series · doi:10.1021/bk-1997-0673 · Cited by 165
Printed Drug-Delivery Systems for Improved Patient Treatment
Sandler, N., & Preis, M. (2016) · Trends in Pharmacological Sciences · doi:10.1016/j.tips.2016.10.002 · Cited by 164
Heller, C., Schwentenwein, M., Russmueller, G., Varga, F., Stampfl, J., & Liska, R. (2009) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23734 · Cited by 163
Self-citation3D printing for children: What to build next?
Eisenberg, M. (2012) · International Journal of Child-Computer Interaction · doi:10.1016/j.ijcci.2012.08.004 · Cited by 163
Stress Relaxation via Addition−Fragmentation Chain Transfer in a Thiol-ene Photopolymerization
Kloxin, C. J., Scott, T. F., & Bowman, C. N. (2009) · Macromolecules · doi:10.1021/ma802771b · Cited by 161
Emerging Carbon and Post-Carbon Nanomaterial Inks for Printed Electronics
Secor, E. B., & Hersam, M. C. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502431r · Cited by 159
Zhong, C., Wu, J., Reinhart‐King, C. A., & Chu, C. C. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.04.011 · Cited by 159
3D Fabrication of Polymeric Scaffolds for Regenerative Therapy
Ratheesh, G., Venugopal, J. R., Chinnappan, A., Ezhilarasu, H., Sadiq, A., & Ramakrishna, S. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00370 · Cited by 158
Two-Photon Absorbing Materials and Two-Photon-Induced Chemistry
Rumi, M., Barlow, S. H., Wang, J., Perry, J. W., & Marder, S. R. (2008) · Springer eBooks · doi:10.1007/12_2008_133 · Cited by 157
Rai, B., Lin, J., Lim, Z. X. H., Guldberg, R. E., Hutmacher, D. W., & Cool, S. M. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.07.001 · Cited by 157
Current Trends on Medical and Pharmaceutical Applications of Inkjet Printing Technology
Scoutaris, N., Ross, S. A., & Douroumis, D. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-1931-3 · Cited by 157
3-dimensional (3D) fabricated polymer based drug delivery systems
Moulton, S. E., & Wallace, G. G. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.07.005 · Cited by 156
Torgersen, J., Ovsianikov, A., Mironov, V. A., Pucher, N., Qin, X., Li, Z., Cicha, K., Machacek, T., Liska, R., Jantsch, V., et al. (2012) · Journal of Biomedical Optics · doi:10.1117/1.jbo.17.10.105008 · Cited by 155
Self-citationControl of polymerization shrinkage and stress in nanogel-modified monomer and composite materials
Moraes, R. R., Garcia, J. W., Barros, M. D., et al. (2011) · Dental Materials · doi:10.1016/j.dental.2011.01.006 · Cited by 153
Kong, Y. L., Gupta, M. K., Johnson, B. N., & McAlpine, M. C. (2016) · Nano Today · doi:10.1016/j.nantod.2016.04.007 · Cited by 153
Rapid prototyping of electrically conductive components using 3D printing technology
Czyżewski, J., Burzyński, P., Gaweł, K., & Meisner, J. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.03.015 · Cited by 151
Photoinitiated crosslinked degradable copolymer networks for tissue engineering applications
Davis, K. A., Burdick, J. A., & Anseth, K. S. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00582-3 · Cited by 145
Interfacial characteristics of composites fabricated by laminated object manufacturing
Klosterman, D., Chartoff, R. P., Graves, G., Osborne, N., & Priore, B. E. (1998) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(98)00088-8 · Cited by 142
Engelhardt, S., Hoch, E., Borchers, K., Meyer, W., Krüger, H., Tovar, G. E. M., & Gillner, A. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025003 · Cited by 141
Ovsianikov, A., Xiao, S., Farsari, M., Vamvakaki, M., Fotakis, C., & Chichkov, B. N. (2009) · Optics Express · doi:10.1364/oe.17.002143 · Cited by 141
Metering and dispensing of powder; the quest for new solid freeforming techniques
Yang, S., & Evans, J. (2007) · Powder Technology · doi:10.1016/j.powtec.2007.04.004 · Cited by 140
Two-photon lithography for microelectronic application
Wu, E.-S., Strickler, J. H., Harrell, W. R., & Webb, W. W. (1992) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.130367 · Cited by 140
Lippits, D. R., Rastogi, S., & Höhne, G. W. H. (2006) · Physical Review Letters · doi:10.1103/physrevlett.96.218303 · Cited by 140
Suwanprateeb, J., Sanngam, R., Suvannapruk, W., & Panyathanmaporn, T. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3697-1 · Cited by 139
Density prediction of crystalline polymer sintered parts at various powder bed temperatures
Tontowi, A. E., & Childs, T. H. C. (2001) · Rapid Prototyping Journal · doi:10.1108/13552540110395637 · Cited by 137
Kim, S. H., Hong, K., Lee, K. H., & Frisbie, C. D. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401200y · Cited by 137
Schantz, J., Brandwood, A., Hutmacher, D. W., Khor, H. L., & Bittner, K. (2005) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-005-3584-3 · Cited by 136
Athreya, S. R., Kalaitzidou, K., & Das, S. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.12.028 · Cited by 135
Partee, B., Hollister, S. J., & Das, S. (2005) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2162589 · Cited by 135
Three-dimensional optical circuitry using two-photon-assisted polymerization
Joshi, M. P., Pudavar, H. E., Swiatkiewicz, J. J., Prasad, P. N., & Reianhardt, B. A. (1999) · Applied Physics Letters · doi:10.1063/1.123283 · Cited by 133
Ovsianikov, A., Ostendorf, A., & Chichkov, B. N. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.01.058 · Cited by 132
Cornucopia: The Concept of Digital Gastronomy
Zoran, A. R., & Coelho, M. (2011) · Leonardo · doi:10.1162/leon_a_00243 · Cited by 130
Zheng, H., Zhang, J., Lu, S., Gaochao, W., & Xu, Z. (2005) · Materials Letters · doi:10.1016/j.matlet.2005.11.003 · Cited by 129
Yu, D., Shen, X., Branford-White, C. J., Zhu, L., White, K., & Xiang, Y. (2009) · Journal of Pharmacy and Pharmacology · doi:10.1211/jpp.61.03.0006 · Cited by 128
Spikes, J. D., Shen, H., Kopečková, P., & Kopec̆ek, J. (1999) · Photochemistry and Photobiology · doi:10.1111/j.1751-1097.1999.tb07980.x · Cited by 127
3D Printing of cement composites
Gibbons, G. J., Williams, R., Purnell, P., & Farahi, E. (2009) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1179/174367509x12472364600878 · Cited by 126
Printing technologies in fabrication of drug delivery systems
Kolakovic, R., Viitala, T., Ihalainen, P., Genina, N., Peltonen, J. P. K., & Sandler, N. (2013) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2013.859134 · Cited by 126
Ge, Z., Tian, X., Heng, B. C., Fan, V., Yeo, J. F., & Cao, T. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/2/021001 · Cited by 125
Quantitative assessment of dynamic PET imaging data in cancer imaging
Muzi, M., O’Sullivan, F., Mankoff, D. A., Doot, R. K., Pierce, L. A., Kurland, B. F., Linden, H. M., & Kinahan, P. E. (2012) · Magnetic Resonance Imaging · doi:10.1016/j.mri.2012.05.008 · Cited by 121
Kuebler, S. M., Braun, K. L., Zhou, W., Cammack, J. K., Yu, T., Ober, C. K., Marder, S. R., & Perry, J. W. (2003) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/s1010-6030(03)00030-3 · Cited by 118
Binder, T. M., Moertl, D., Mundigler, G., Rehak, G., Franke, M., Delle‐Karth, G., Möhl, W., Baumgartner, H., & Maurer, G. (2000) · Journal of the American College of Cardiology · doi:10.1016/s0735-1097(99)00498-2 · Cited by 115
Chumnanklang, R., Panyathanmaporn, T., Sitthiseripratip, K., & Suwanprateeb, J. (2007) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.11.004 · Cited by 114
Biofabrication: using biological materials and biocatalysts to construct nanostructured assemblies
Wu, L., & Payne, G. F. (2004) · Trends in biotechnology · doi:10.1016/j.tibtech.2004.09.008 · Cited by 113
3D printed cellular solid outperforms traditional stochastic foam in long-term mechanical response
Maiti, A., Small, W., Lewicki, J. P., Weisgraber, T. H., Duoss, E. B., Chinn, S. C., Pearson, M. A., Spadaccini, C., Maxwell, R. S., & Wilson, T. S. (2016) · Scientific Reports · doi:10.1038/srep24871 · Cited by 109
Basu, S., Cunningham, L. P., Pins, G. D., Bush, K., Taboada, R., Howell, A. R., Wang, J., & Campagnola, P. J. (2005) · Biomacromolecules · doi:10.1021/bm049258y · Cited by 108
Bai, J., Goodridge, R., Hague, R., et al. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.03.012 · Cited by 106
Bio-inspired 3D microenvironments: a new dimension in tissue engineering
Magin, C. M., Alge, D. L., & Anseth, K. S. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/2/022001 · Cited by 106
Bai, J., Goodridge, R., Hague, R., & Song, M. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23459 · Cited by 105
An empirical study into laser sintering of ultra-high molecular weight polyethylene (UHMWPE)
Goodridge, R., Hague, R., & Tuck, C. J. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.08.016 · Cited by 105
Printing nanostructured carbon for energy storage and conversion applications
Lawes, S., Riese, A., Sun, Q., et al. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.008 · Cited by 105
Chen, C., Lee, M., Shyu, V. B., et al. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.04.029 · Cited by 103
Walker, E. P., & Rentzepis, P. M. (2008) · Nature Photonics · doi:10.1038/nphoton.2008.121 · Cited by 102
Pucher, N., Rosspeintner, A., Satzinger, V., Schmidt, V., Gescheidt, G., Stampfl, J., & Liska, R. (2009) · Macromolecules · doi:10.1021/ma9007785 · Cited by 101
Self-citationChua, C. K., & Yeong, W. Y. (2014) · WORLD SCIENTIFIC eBooks · doi:10.1142/9193 · Cited by 100
Industrial Photoinitiators: A Technical Guide
Green, W. A. (2010) · Thammasat University Digital Collections · Cited by 98
Three-dimensional woodpile photonic crystal templates for the infrared spectral range
Mizeikis, V., Seet, K. K., Juodkazis, S., & Misawa, H. (2004) · Optics Letters · doi:10.1364/ol.29.002061 · Cited by 98
Synthesis and structure‐activity relationship of several aromatic ketone‐based two‐photon initiators
Li, Z., Siklos, M. I., Pucher, N., Cicha, K., ajami, A., Husinsky, W., Rosspeintner, A., Vauthey, E., Gescheidt, G., Stampfl, J., et al. (2011) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24806 · Cited by 93
Self-citationQin, X., Gruber, P., Marković, M., Plochberger, B., Klotzsch, E., Stampfl, J., Ovsianikov, A., & Liska, R. (2014) · Polymer Chemistry · doi:10.1039/c4py00792a · Cited by 93
Self-citationBiological evaluation of an apatite–mullite glass-ceramic produced via selective laser sintering
Goodridge, R., Wood, D. J., Ohtsuki, C., & Dalgarno, K. W. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.10.005 · Cited by 93
Park, S., Lim, T. W., Yang, D., Cho, N. C., & Lee, K.-S. (2006) · Applied Physics Letters · doi:10.1063/1.2363956 · Cited by 93
Cai, Y., & Jessop, J. L. P. (2006) · Polymer · doi:10.1016/j.polymer.2006.07.031 · Cited by 92
Lee, T. Y., Carioscia, J., Smith, Z., & Bowman, C. N. (2007) · Macromolecules · doi:10.1021/ma0624954 · Cited by 92
Oishi, M., Fukuda, M., Yajima, N., Yoshida, K., Takahashi, M., Hiraishi, T., Takao, T., Saito, A., & Fujii, Y. (2013) · Journal of neurosurgery · doi:10.3171/2013.3.jns121109 · Cited by 91
A Nanosilica/Nylon-12 Composite Powder for Selective Laser Sintering
Chunze, Y., Yusheng, S., Jinsong, Y., et al. (2008) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684408094062 · Cited by 91
Qin, X., Torgersen, J., Saf, R., Mühleder, S., Pucher, N., Ligon, S. C., Holnthoner, W., Redl, H. R., Ovsianikov, A., Stampfl, J., et al. (2013) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.26903 · Cited by 91
Self-citationLu, W., Dong, X., Chen, W., Zhao, Z., & Duan, X. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04025h · Cited by 91
Sušec, M., Ligon, S. C., Stampfl, J., Liska, R., & Krajnc, P. (2013) · Macromolecular Rapid Communications · doi:10.1002/marc.201300016 · Cited by 90
Self-citationIncorporation of growth factor containing Matrigel promotes vascularization of porous PLGA scaffolds
Laschke, M. W., Rücker, M., Jensen, G., Carvalho, C., Mülhaupt, R., Gellrich, N., & Menger, M. D. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31503 · Cited by 90
Self-citationExploring the benefits of β-allyl sulfones for more homogeneous dimethacrylate photopolymer networks
Gorsche, C., Koch, T., Moszner, N., & Liska, R. (2015) · Polymer Chemistry · doi:10.1039/c4py01582g · Cited by 90
Self-citationBurmeister, F., Steenhusen, S., Houbertz, R., Zeitner, U. D., Nolte, S., & Tünnermann, A. (2012) · Journal of Laser Applications · doi:10.2351/1.4730807 · Cited by 89
Photosensitive Polymeric Materials for Two-Photon 3D WORM Optical Data Storage Systems
Yanez, C. O., Andrade, C. D., Yao, S., Luchita, G., Bondar, M. V., & Belfield, K. D. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am900587u · Cited by 86
Gurr, M., Hofmann, D., Ehm, M., et al. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200800344 · Cited by 84
Self-citationComposite rapid prototyping: overcoming the drawback of poor mechanical properties
Karalekas, D., & Antoniou, K. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2004.04.019 · Cited by 84
Ankireddy, K., Vunnam, S., Kellar, J. J., & Cross, W. M. (2012) · Journal of Materials Chemistry C · doi:10.1039/c2tc00336h · Cited by 84
Stress Relaxation by Addition−Fragmentation Chain Transfer in Highly Cross-Linked Thiol−Yne Networks
Park, H., Kloxin, C. J., Scott, T. F., & Bowman, C. N. (2010) · Macromolecules · doi:10.1021/ma1020209 · Cited by 83
Laschke, M. W., Rücker, M., Jensen, G., de Carvalho, C. R. R., Mülhaupt, R., Gellrich, N., & Menger, M. D. (2008) · Annals of Surgery · doi:10.1097/sla.0b013e31818fa52f · Cited by 83
Self-citationDuan, B., & Wang, M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.05.022 · Cited by 83
Qi, S., & Craig, D. Q. M. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.01.003 · Cited by 83
Nylon-12-Preparation, Properties, and Applications
Griehl, W., & Ruestem, D. (1970) · Industrial & Engineering Chemistry · doi:10.1021/ie50723a005 · Cited by 82
Haberstroh, K., Ritter, K., Kuschnierz, J., Bormann, K., Kaps, C., Carvalho, C., Mülhaupt, R., Sittinger, M., & Gellrich, N. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31611 · Cited by 80
Self-citationPhotopolymerization kinetics of an epoxy‐based resin for stereolithography
Corcione, C. E., Greco, A., & Maffezzoli, A. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20347 · Cited by 79
Salmoria, G. V., Leite, J. L., Ahrens, C. H., Lago, A., & Pires, A. T. N. (2007) · Polymer Testing · doi:10.1016/j.polymertesting.2006.12.002 · Cited by 79
Effects of graphite powder on the laser sintering behaviour of polycarbonate
Ho, H. C. H., Cheung, W. L., & Gibson, I. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441148 · Cited by 78
Hsieh, T. M., Benjamin Ng, C. W., Narayanan, K., Wan, A. C. A., & Ying, J. Y. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.06.029 · Cited by 77
Two-Photon Polymerization of Hybrid Sol-Gel Materials for Photonics Applications
Ovsianikov, A., Gaidukevičiūtė, A., Chichkov, B. N., Oubaha, M., MacCraith, B. D., Sakellari, I., Giakoumaki, A., Gray, D. H., Vamvakaki, M., Farsari, M., et al. (2008) · Laser Chemistry · doi:10.1155/2008/493059 · Cited by 76
Laser-assisted bioprinting to deal with tissue complexity in regenerative medicine
Guillemot, F., Guillotin, B., Fontaine, A., Ali, M., Catros, S., Kériquel, V., Fricain, J., Rémy, M., Bareille, R., & Amédée, J. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.272 · Cited by 75
Vinyl carbonates, vinyl carbamates, and related monomers: synthesis, polymerization, and application
Husár, B., & Liska, R. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15232g · Cited by 74
Self-citationCrystallization kinetics of poly( L ‐lactide)/carbonated hydroxyapatite nanocomposite microspheres
Zhou, W. Y., Duan, B., Wang, M., & Cheung, W. L. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30527 · Cited by 74
3D printing of weft knitted textile based structures by selective laser sintering of nylon powder
Beecroft, M. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/137/1/012017 · Cited by 72
Optical Properties of Polylactides
Hutchinson, M. H., Dorgan, J. R., Knauss, D. M., & Hait, S. B. (2006) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0001-z · Cited by 70
Improvement of spatial resolution in nano-stereolithography using radical quencher
Park, S., Lim, T. W., Yang, D.-Y., Kim, R. H., & Lee, K.-S. (2006) · Macromolecular Research · doi:10.1007/bf03218724 · Cited by 70
Rücker, M., Laschke, M. W., Junker, D., Carvalho, C., Tavassol, F., Mülhaupt, R., Gellrich, N., & Menger, M. D. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31722 · Cited by 68
Self-citationSynthesis and High-Throughput Processing of Polymeric Hydrogels for 3D Cell Culture
Lowe, S. B., Tan, V. T. G., Soeriyadi, A. H., Davis, T. P., & Gooding, J. J. (2014) · Bioconjugate Chemistry · doi:10.1021/bc500310v · Cited by 67
Biofabrication of 3D constructs: fabrication technologies and spider silk proteins as bioinks
DeSimone, E. K., Schacht, K., Jüngst, T., Gröll, J., & Scheibel, T. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2015-0106 · Cited by 67
Multiphoton Lithography: Techniques, Materials and Applications
Stampfl, J., Liska, R., & Ovsianikov, A. (2016) · Wiley eBooks · doi:10.1002/9783527682676 · Cited by 67
Self-citationWater‐soluble photopolymers for rapid prototyping of cellular materials
Liska, R., Schwager, F., Maier, C., Cano‐Vives, R., & Stampfl, J. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.22025 · Cited by 64
Self-citationBiocompatibility of ceramic scaffolds for bone replacement made by 3D printing
Leukers, B., Gülkan, H., Irsen, S. H., Milz, S., Tille, C., Seitz, H., & Schieker, M. (2005) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.200500968 · Cited by 64
New Materials for Rapid Prototyping Applications
Stampfl, J., & Liska, R. (2005) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200500199 · Cited by 64
Self-citationMoroni, L., Poort, G., van Keulen, F., de Wijn, J. R., & van Blitterswijk, C. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30716 · Cited by 63
Baudis, S., Nehl, F., Ligon, S. C., Nigisch, A., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2011) · Biomedical Materials · doi:10.1088/1748-6041/6/5/055003 · Cited by 62
Self-citationUse of Rapid Prototyping in the Care of Patients with Structural Heart Disease
Kim, M. S., Hansgen, A. R., & Carroll, J. D. (2008) · Trends in Cardiovascular Medicine · doi:10.1016/j.tcm.2008.11.001 · Cited by 62
Cicha, K., Li, Z., Stadlmann, K., Ovsianikov, A., Markut‐Kohl, R., Liska, R., & Stampfl, J. (2011) · Journal of Applied Physics · doi:10.1063/1.3639304 · Cited by 60
Self-citationGel time prediction of multifunctional acrylates using a kinetics model
Boddapati, A., Rahane, S. B., Slopek, R. P., Breedveld, V., Henderson, C. L., & Grover, M. A. (2010) · Polymer · doi:10.1016/j.polymer.2010.12.024 · Cited by 58
Liu, Z., Zhao, J., Xu, W., Long, Q., Nie, S., & Cui, Z. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502168x · Cited by 58
Experimental investigation into the selective laser sintering of high‐impact polystyrene
Shi, Y., Wang, Y., Chen, J., & Huang, S. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27686 · Cited by 55
Yang, G. H., Mun, F., & Kim, G. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.12.047 · Cited by 55
Photopolymerization-based additive manufacturing for the development of 3D porous scaffolds
Husár, B., Hatzenbichler, M., Mironov, V. A., Liska, R., Stampfl, J., & Ovsianikov, A. (2014) · Elsevier eBooks · doi:10.1533/9780857098104.2.149 · Cited by 52
Self-citationZhao, J., Gao, Y., Gu, W., Wang, C., Lin, J., Chen, Z., & Cui, Z. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm34598f · Cited by 52
Schumann, D., Ekaputra, A. K., Lam, C. X. F., et al. (2007) · Methods in molecular medicine · doi:10.1007/978-1-59745-443-8_6 · Cited by 52
Angarano, M., Schulz, S., Fabritius, M., Vogt, R., Steinberg, T., Tomakidi, P., Friedrich, C., & Mülhaupt, R. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202816 · Cited by 50
Self-citationHard‐block degradable thermoplastic urethane‐elastomers for electrospun vascular prostheses
Baudis, S., Ligon, S. C., Seidler, K., Weigel, G., Grasl, C., Bergmeister, H., Schima, H., & Liska, R. (2011) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.25887 · Cited by 50
Self-citationBiomaterials based on low cytotoxic vinyl esters for bone replacement application
Husár, B., Heller, C. M., Schwentenwein, M., Mautner, A., Varga, F., Koch, T., Stampfl, J., & Liska, R. (2011) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24933 · Cited by 47
Self-citationLi, J., Jia, B., & Gu, M. (2008) · Optics Express · doi:10.1364/oe.16.020073 · Cited by 46
High sensitivity gas sensor based on high-Q suspended polymer photonic crystal nanocavity
Clevenson, H., Desjardins, P., Gan, X., & Englund, D. (2014) · Applied Physics Letters · doi:10.1063/1.4879735 · Cited by 45
A New Ti-5Ag Alloy for Customized Prostheses by Three-dimensional Printing (3DP™)
Hong, S.-B., Eliaz, N., Leisk, G. G., Sachs, E. M., Latanision, R. M., & Allen, S. M. (2001) · Journal of Dental Research · doi:10.1177/00220345010800030301 · Cited by 44
Study of the selective laser sintering of polycarbonate and postprocess for parts reinforcement
Shi, Y., Chen, J., Wang, Y., Li, Z., & Huang, S. (2007) · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · doi:10.1243/14644207jmda65 · Cited by 44
Kang, S., Bae, J., Park, S.-A., Kim, W.-D., Park, M.-S., Ko, Y.-J., Jang, H.-S., & Park, J. H. (2012) · Biotechnology Letters · doi:10.1007/s10529-012-0900-0 · Cited by 43
Kim, G., & Son, J. G. (2008) · Applied Physics A · doi:10.1007/s00339-008-4959-3 · Cited by 43
Skin 3D Bioprinting. Applications in Cosmetology
Velasquillo, C., Galue, E. A., Rodriquez, L., Ibarra, C., & Ibarra, L. G. (2013) · Journal of Cosmetics Dermatological Sciences and Applications · doi:10.4236/jcdsa.2013.31a012 · Cited by 41
Ligon, S. C., Seidler, K., Gorsche, C., Grießer, M., Moszner, N., & Liska, R. (2015) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27788 · Cited by 40
Self-citation3D/4D Printing Hydrogel Composites: A Pathway to Functional Devices
Bakarich, S. E., Gorkin, R. A., III, Naficy, S., Gately, R. D., Panhuis, M. I. H., & Spinks, G. M. (2015) · MRS Advances · doi:10.1557/adv.2015.9 · Cited by 40
New Monomers for Dental Application
Moszner, N. (2004) · Macromolecular Symposia · doi:10.1002/masy.200451306 · Cited by 39
Houbertz, R., Declerck, P., Passinger, S., Ovsianikov, A., Serbin, J., & Chichkov, B. N. (2007) · physica status solidi (a) · doi:10.1002/pssa.200776416 · Cited by 39
Fourkas, J. T., & Petersen, J. S. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52957f · Cited by 39
Aging behavior of thermoplastic elastomers in the laser sintering process
Ziegelmeier, S., Wöllecke, F., Tuck, C. J., Goodridge, R., & Hague, R. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.172 · Cited by 39
Bhuian, B. H., Winfield, R. J., O’Brien, S., & Crean, G. M. (2005) · Applied Surface Science · doi:10.1016/j.apsusc.2005.07.094 · Cited by 38
Schumann, D., Ekaputra, A. K., Lam, C. X. F., et al. (2007) · PubMed · Cited by 38
One‐ and two‐photon activity of cross‐conjugated photoinitiators with bathochromic shift
Heller, C. M., Pucher, N., Seidl, B., Kalinyaprak‐Icten, K., Ullrich, G., Kuna, L., Satzinger, V., Schmidt, V., Lichtenegger, H. C., Stampfl, J., et al. (2007) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.22078 · Cited by 37
Self-citationCell-Laden 3D Printed Scaffolds for Bone Tissue Engineering
Piard, C., Chen, Y., & Fisher, J. P. (2015) · Clinical Reviews in Bone and Mineral Metabolism · doi:10.1007/s12018-015-9198-5 · Cited by 37
Three Dimensional Material Processing with Femtosecond Lasers
Ovsianikov, A., Passinger, S., Houbertz, R., & Chichkov, B. N. (2007) · Springer series in optical sciences/SPringer series in optical sciences · doi:10.1007/978-0-387-30453-3_6 · Cited by 36
High‐Performance Microring Resonators Fabricated with Multiphoton Absorption Polymerization
Li, L., Gershgoren, E., Kumi, G., Chen, W., Ho, P. ‐., Herman, W. N., & Fourkas, J. T. (2008) · Advanced Materials · doi:10.1002/adma.200800032 · Cited by 35
Preparation and Selective Laser Sintering of Nylon-12-Coated Aluminum Powders
Yan, C., Shi, Y., Yang, J.-S., et al. (2009) · Journal of Composite Materials · doi:10.1177/0021998309340932 · Cited by 33
Transdermal Drug Delivery: Clinical Considerations for the Obstetrician–Gynecologist
Potts, R. O., & Løbo, R. A. (2005) · Obstetrics and Gynecology · doi:10.1097/01.aog.0000161958.70059.db · Cited by 32
Robotic dispensing of composite scaffolds and in vitro responses of bone marrow stromal cells
Hong, S., Jeong, I., Noh, K., Yu, H., Lee, G., & Kim, H. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3745-x · Cited by 31
Lu, Y., Hasegawa, F., Goto, T., Ohkuma, S., Fukuhara, S., Kawazu, Y., Totani, K., Yamashita, T., & Watanabe, T. (2004) · Journal of Luminescence · doi:10.1016/j.jlumin.2004.02.012 · Cited by 31
Woggon, T., Kleiner, T., Punke, M., & Lemmer, U. (2009) · Optics Express · doi:10.1364/oe.17.002500 · Cited by 30
Soares, S., & Forkes, A. (2014) · International Conference on Engineering and Product Design Education (EPDE) · Cited by 30
Polymer Ionomers for Rapid Prototyping and Rapid Manufacturing by Means of 3D Printing
Pfister, A., Walz, U., Laib, A., & Mülhaupt, R. (2005) · Macromolecular Materials and Engineering · doi:10.1002/mame.200400282 · Cited by 29
Self-citationGauss, P., Ligon, S. C., Grießer, M., Gorsche, C., Švajdlenková, H., Koch, T., Moszner, N., & Liska, R. (2015) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27993 · Cited by 29
Self-citationFinishing of SLS-Parts for Rapid Manufacturing (RM) - A Comprehensive Approach
Schmid, M., Simon, C., & Levy, G. N. (2009) · doi:10.26153/tsw/15081 · Cited by 28
Two-photon-induced polymerization in a laser gain medium for optical microstructure
Yokoyama, S., Nakahama, T., Miki, H., & Mashiko, S. (2003) · Applied Physics Letters · doi:10.1063/1.1573350 · Cited by 27
Two-photon-absorbed photopolymerization for three-dimensional microfabrication
Maruo, S., & Kawata, S. (2002) · IEEE International Conference on Micro Electro Mechanical Systems (MEMS) · doi:10.1109/memsys.1997.581794 · Cited by 27
Effect of Hydroxyapatite on Biodegradable Scaffolds Fabricated by SLS
Eosoly, S., Lohfeld, S., & Brabazon, D. (2008) · Key engineering materials · doi:10.4028/www.scientific.net/kem.396-398.659 · Cited by 26
Facile Method for Fabricating Flexible Substrates with Embedded, Printed Silver Lines
Mahajan, A., Francis, L. F., & Frisbie, C. D. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am405314s · Cited by 25
Ventura, M. J., Bullen, C. R., & Gu, M. (2007) · Optics Express · doi:10.1364/oe.15.001817 · Cited by 24
Ishihara, J., Komatsu, K., Sugihara, O., & Kaino, T. (2007) · Applied Physics Letters · doi:10.1063/1.2430480 · Cited by 23
Hofler, T. J., Grießer, T., Gruber, M., et al. (2008) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200700456 · Cited by 23
Causer, C. (2009) · IEEE Potentials · doi:10.1109/mpot.2009.933608 · Cited by 22
Testing of the ABS Materials for Application in Fused Deposition Modeling Technology
Nováková-Marcinčínová, Ľ., & Novák-Marcinčin, J. (2013) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.309.133 · Cited by 21
A bi-stable buckled energy harvesting device actuated via torque arms
Porter, D. A., & Berfield, T. A. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/7/075003 · Cited by 21
3D nano- and micro-patterning of Biomaterials for Controlled Drug Delivery
Curry, E. J., Henoun, A. D., Miller, A. N., & Nguyen, T. D. (2016) · Therapeutic Delivery · doi:10.4155/tde-2016-0052 · Cited by 21
Chen, F., Song, Z., Gao, L., Hong, H., & Liu, C. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb00435k · Cited by 20
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Photopolymerization in 3D Printing
Bagheri, A., & Jin, J. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00165 · Cited by 1,436
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
Biofabrication strategies for 3D in vitro models and regenerative medicine
Moroni, L., Burdick, J. A., Highley, C., Lee, S. J., Morimoto, Y., Takeuchi, S., & Yoo, J. J. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0006-y · Cited by 753
Metadata
- Authors
- Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-07-30
- Volume
- 117
- Issue
- 15
- Pages
- 10212-10290
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W2741181432
- Cited by
- 3,741
- References
- 412
- FWCI
- 20.49
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.