Development Trends in Porous Adsorbents for Carbon Capture
The DOI matches its Crossref record; 272 of the 275 references it cites were found in a registry or an index.
Abstract
Accumulation of greenhouse gases especially CO2 in the atmosphere leading to global warming with undesirable climate changes has been a serious global concern. Major power generation in the world is from coal based power plants. Carbon capture through pre- and post- combustion technologies with various technical options like adsorption, absorption, membrane separations, and chemical looping combustion with and without oxygen uncoupling have received considerable attention of researchers, environmentalists and the stake holders. Carbon capture from flue gases can be achieved with micro and meso porous adsorbents. This review covers carbonaceous (organic and metal organic frameworks) and noncarbonaceous (inorganic) porous adsorbents for CO2 adsorption at different process conditions and pore sizes. Focus is also given to noncarbonaceous micro and meso porous adsorbents in chemical looping combustion involving insitu CO2 capture at high temperature (>400 °C). Adsorption mechanisms, material characteristics, and synthesis methods are discussed. Attention is given to isosteric heats and characterization techniques. The options to enhance the techno-economic viability of carbon capture techniques by integrating with CO2 utilization to produce industrially important chemicals like ammonia and urea are analyzed. From the reader's perspective, for different classes of materials, each section has been summarized in the form of tables or figures to get a quick glance of the developments.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“unlike the microporous organic polymers, there are not any complexity or concern regarding the synthesis, cost and environmental aspects of synthesis of carbon-based adsorbents [11,18,20,33].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [20]
Citations
Cites
Items 201–272 of 272
Mesoporous Cu2O submicro-spheres, facile synthesis and the selective adsorption properties
Liu, J., Gao, Z., Han, H., Wu, D., Xu, F., Wang, H., & Jiang, K. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.01.064 · Cited by 67
Pedram, M. Z., Omidkhah, M., & Amooghin, A. E. (2013) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2013.04.024 · Cited by 66
Expert elicitations of energy penalties for carbon capture technologies
Jenni, K. E., Baker, E. D., & Nemet, G. F. (2012) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.11.022 · Cited by 66
Hollow fiber adsorbents for CO2 capture: Kinetic sorption performance
Lively, R. P., Leta, D. P., DeRites, B. A., Chance, R. R., & Koros, W. J. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.01.004 · Cited by 65
Akhtar, F., & Bergström, L. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.04044.x · Cited by 65
Hsiao, H., Huang, C.-M., Hsu, M.-Y., & Chen, H. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.08.006 · Cited by 65
Response surface methodology as an efficient tool for optimizing carbon adsorbents for CO2 capture
Gil, M. V., Martínez, M., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2012.06.018 · Cited by 63
Lwin, Y., & Abdullah, F. (2009) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-009-0156-7 · Cited by 63
Synthesis of binderless zeolite X microspheres and their CO2 adsorption properties
Yu, L., Gong, J., Zeng, C., & Zhang, L. (2013) · Separation and Purification Technology · doi:10.1016/j.seppur.2013.06.035 · Cited by 63
Cortés, F. B., Chejne, F., Carrasco-Marı́n, F., Moreno‐Castilla, C., & Pérez-Cadenas, A. F. (2010) · Adsorption · doi:10.1007/s10450-010-9206-5 · Cited by 62
Polyethyleneimine-loaded bimodal porous silica as low-cost and high-capacity sorbent for CO2 capture
Witoon, T. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2012.09.014 · Cited by 62
Sacia, E. R., Ramkumar, S., Phalak, N., & Fan, L.-S. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc300150k · Cited by 61
Viability of Clathrate Hydrates as CO2 Capturing Agents: A Theoretical Study
Srivastava, H. K., & Sastry, G. N. (2011) · The Journal of Physical Chemistry A · doi:10.1021/jp203599g · Cited by 60
Thermodynamics and regeneration of CO2 adsorption on mesoporous spherical-silica particles
Lu, C., Su, F., Hsu, S.-C., Chen, W., Bai, H., Hwang, J. F., & Lee, H.-H. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.08.002 · Cited by 59
Sorbent design for CO2 capture under different flue gas conditions
Marco-Lozar, J. P., Kunowsky, M., Suárez‐García, F., & Linares-Solano, A. (2014) · Carbon · doi:10.1016/j.carbon.2014.01.064 · Cited by 59
Techno-economic analysis and optimization models for carbon capture and storage: a survey
Huang, Y., Rebennack, S., & Zheng, Q. P. (2013) · Energy Systems · doi:10.1007/s12667-013-0086-0 · Cited by 55
Soares, J. L., Moreira, R. D. F. P. M., José, H. J., Grande, C. A., & Rodrigues, A. E. (2004) · Separation Science and Technology · doi:10.1081/ss-120039307 · Cited by 55
Application of carbon fibre composites to CO2 capture from flue gas
Thiruvenkatachari, R., Su, S., Yu, X. X., & Bae, J. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.12.014 · Cited by 54
A novel method for the preparation of CO2 sorption sorbents with high performance
Zhang, Z., Wang, B., Sun, Q., & Zheng, L. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.02.012 · Cited by 54
Vasiliev, P., Shen, Z. J., Hodgkins, R. P., & Bergström, L. (2006) · Chemistry of Materials · doi:10.1021/cm061205v · Cited by 53
Wang, W., Li, J., Wei, X., Ding, J., Feng, H., Yan, J., & Yang, J. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.12.072 · Cited by 52
Li, P., Zhang, S., Chen, S., Zhang, Q., Pan, J., & Ge, B. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27937 · Cited by 52
Development of solid adsorbent for carbon dioxide capture from flue gas
Dinda, S. (2013) · Separation and Purification Technology · doi:10.1016/j.seppur.2013.02.027 · Cited by 51
Wang, H., Huang, L., Wang, Z., Mitra, A., & Yan, Y. (2001) · Chemical Communications · doi:10.1039/b104275k · Cited by 51
Microporous polymelamine network for highly selective CO2 adsorption
Liu, L., Li, P., Zhu, L., Zou, R., & Zhao, Y. (2012) · Polymer · doi:10.1016/j.polymer.2012.12.015 · Cited by 51
Toward carbon dioxide capture using nanoporous materials
D’Alessandro, D. M., & McDonald, T. M. (2010) · Pure and Applied Chemistry · doi:10.1351/pac-con-10-09-18 · Cited by 51
Zhang, Q., Du, Q., Jiao, T., Zhang, Z., Wang, S., Sun, Q., & Gao, F. (2013) · Scientific Reports · doi:10.1038/srep02551 · Cited by 50
Integrating desulfurization with CO2-capture in chemical-looping combustion
Solunke, R. D., & Veser, G. (2010) · Fuel · doi:10.1016/j.fuel.2010.09.039 · Cited by 49
Hydrogen from Coal in a Single Step
Mondal, K., Piotrowski, K., Dasgupta, D., Hippo, E. J., & Wiltowski, T. S. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie048974d · Cited by 49
Improvements of calcium oxide based sorbents for multiple CO2 capture cycles
Vieille, L., Govin, A., & Grosseau, P. (2012) · Powder Technology · doi:10.1016/j.powtec.2012.05.042 · Cited by 46
Combustion and flame spread on fuel-soaked porous solids
Zanganeh, J., Moghtaderi, B., & Ishida, H. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2013.03.001 · Cited by 45
Kim, K., Kim, D., Park, Y., & Lee, K. S. (2014) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2014.03.012 · Cited by 44
MgO-templated porous carbons-based CO2 adsorbents produced by KOH activation
Meng, L., & Park, S. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2012.08.043 · Cited by 43
Hydration-induced reactivation of spent sorbents for fluidized bed calcium looping (double looping)
Coppola, A., Salatino, P., Montagnaro, F., & Scala, F. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2013.12.004 · Cited by 42
Zhang, M., Perry, Z., Park, J., & Zhou, H.-C. “. (2013) · Polymer · doi:10.1016/j.polymer.2013.09.029 · Cited by 42
Ordered nanoporous carbon for increasing CO2 capture
Yoo, H., Lee, S., & Park, S. (2012) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2012.08.035 · Cited by 41
Nitrogen-doped porous aromatic frameworks for enhanced CO2 adsorption
Fu, J., Wu, J., Custelcean, R., & Jiang, D. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.09.079 · Cited by 38
Synthesis of dry sorbents for carbon dioxide capture using coal fly ash and its performance
Lee, J., Han, S., & Wee, J. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.06.009 · Cited by 37
Porous Carbons for Carbon Dioxide Capture
Lu, A., Hao, G., & Zhang, X.-Q. (2014) · Green chemistry and sustainable technology · doi:10.1007/978-3-642-54646-4_2 · Cited by 36
Hypercrosslinked microporous organic polymer networks derived from silole-containing building blocks
Zhang, Y., Li, Y., Wang, F., Zhao, Y., Zhang, C., Wang, X., & Jiang, J. (2014) · Polymer · doi:10.1016/j.polymer.2014.09.014 · Cited by 35
Carbon Dioxide Capture from Ambient Air Using Amine-Grafted Mesoporous Adsorbents
Wagner, A., Steen, B., Johansson, G., Zanghellini, E., Jacobsson, P., & Johansson, P. (2013) · International Journal of Spectroscopy · doi:10.1155/2013/690186 · Cited by 35
Carbon Dioxide Capture by MgO-modified MCM-41 Materials
Fu, X., Zhao, N., Li, J., Xiao, F., Wei, W., & Sun, Y. (2009) · Adsorption Science & Technology · doi:10.1260/0263-6174.27.6.593 · Cited by 34
Kamimura, Y., Shimomura, M., & Endo, A. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.08.047 · Cited by 34
Alkali-treated titanium dioxide as adsorbent for CO2 capture from air
Kapica‐Kozar, J., Kusiak‐Nejman, E., Wanag, A., Kowalczyk, Ł., Wróbel, R. J., Mozia, S. H., & Morawski, A. W. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.10.013 · Cited by 32
Sethia, G., Patel, H. A., Pawar, R. R., & Bajaj, H. C. (2014) · Applied Clay Science · doi:10.1016/j.clay.2014.01.019 · Cited by 29
Lee, S., & Park, S. (2013) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2013.09.013 · Cited by 29
Aisyah, L., Ashman, P. J., & Kwong, P. C. W. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.03.068 · Cited by 27
Hierarchically porous binder-free silicalite-1 discs: a novel support for all-zeolite membranes
Akhtar, F., Ojuva, A., Wirawan, S. K., Hedlund, J., & Bergström, L. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm10584a · Cited by 27
Stoeckel, D., Wallacher, D., Zickler, G. A., Perlich, J., Tallarek, U., & Smarsly, B. M. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp55072a · Cited by 26
NOx reduction using amine reclaimer wastes (ARW) generated in post combustion CO2 capture
Botheju, D., Glarborg, P., & Tokheim, L.-A. (2012) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.05.015 · Cited by 25
Carbon Dioxide Adsorption by Metal Organic Frameworks (Synthesis, Testing and Modeling)
Sabouni, R. (2013) · Scholarship@Western (Western University) · Cited by 24
Martín, C. F., García, S., Beneroso, D., Pis, J. J., Rubiera, F., & Pevida, C. (2012) · Separation and Purification Technology · doi:10.1016/j.seppur.2012.03.017 · Cited by 22
Wei, S., Lu, D., Sun, J., He, Y., Zhu, L., Zhang, Y., & Xiao, F. (2012) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2012.08.012 · Cited by 21
Porous and hybrid clay based materials for separation of hydrocarbons
Pinto, M. L., & Pires, J. (2011) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2011.10.002 · Cited by 20
N-doped carbon aerogels for carbon dioxide (CO2) capture
Ello, A. S., Yapo, J. A., & Trokourey, A. (2013) · African Journal of Pure and Applied Chemistry · doi:10.5897/ajpac2013.0481 · Cited by 19
A novel (Zr–Ce) incorporated Ca(OH) 2 nanostructure as a durable adsorbent for CO 2 capture
Hlaing, N. N., Sreekantan, S., Othman, R., Hinode, H., Kurniawan, W., Thant, A. A., Mohamed, A. R., & Salim, C. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.07.043 · Cited by 19
Cao, Y. P., Sit, S. P., & Pan, W. (2014) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2013.05.0175 · Cited by 19
Nicolas, C.-H., Sublet, J., Schuurman, Y., & Pera‐Titus, M. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.08.028 · Cited by 17
Efficient and Rapid Screening of Novel Adsorbents for Carbon Capture in the UK IGSCC Project
Mangano, E., Brandani, S., Ferrari, M., Ahn, H., Friedrich, D., Lozinska, M. L., Wright, P. A., Kahr, J., Morris, R. E., Croad, M., et al. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.05.083 · Cited by 17
Fontaine, M., Peters, T. A., McCann, M. T. P., Kumakiri, I., & Bredesen, R. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.05.189 · Cited by 16
Deng, H., Jin, S., Zhan, L., Wang, Y., Bao-hua, L. U., Qiao, W., & Ling, L. (2012) · New Carbon Materials · doi:10.1016/s1872-5805(12)60013-4 · Cited by 14
Thermodynamics of CO2 adsorption on zeolite NaX in wide intervals of pressures and temperatures
Пулин, А. Л., & Фомкин, А. А. (2004) · Russian Chemical Bulletin · doi:10.1007/s11172-005-0008-y · Cited by 13
Novel sorbents for flue gas purification
Ściubidło, A., & Nowak, W. (2012) · Journal of Power Technologies · Cited by 12
Korrir, A., Kasmi, A. E., Assebban, M., Souikny, A., Haffane, S., Achak, O., & Chafik, T. (2015) · Catalysts · doi:10.3390/catal5020653 · Cited by 11
Hlaing, N. N., Othman, R., Hinode, H., Kurniawan, W., Thant, A. A., Mohamed, A. R., Salim, C., & Sreekantan, S. (2014) · Procedia Environmental Sciences · doi:10.1016/j.proenv.2014.03.011 · Cited by 10
Nanostructured mesoporous materials obtained by template synthesis and controlled shape replica
Beretta, M. (2009) · BOA (University of Milano-Bicocca) · Cited by 6
Sorption of Single Gases and Their Binary Mixtures in Zeolites
Rees, L. V. C., Hampson, J., & Brückner, P. (1992) · Springer eBooks · doi:10.1007/978-94-011-2604-5_7 · Cited by 5
Zhang, Y., Rubel, A. M., Mehrez, S., Neathery, J. K., & Liu, K. (2012) · Energy and Environment Research · doi:10.5539/eer.v2n1p217 · Cited by 4
Drese, J. H. (2010) · SMARTech Repository (Georgia Institute of Technology) · Cited by 3
Pathways from laboratory to full scale carbon capture—Technology demonstrations in plant settings
Qader, A., & Hooper, B. N. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.02.197 · Cited by 2
Thermokinetic/mass-transfer analysis of carbon capture for reuse/sequestration.
Stechel, E. B., Brady, P. V., Staiger, C. L., & Luketa, A. (2010) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1010854 · Cited by 1
Structuring porous adsorbents and composites for gas separation and odor removal
Keshavarzi, N. (2014) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 1
Research works printed but not linked: 24
- 10.1016/j.cherd.2012.02.011 · DOI
- 10.1016/S0196-8904(96)00242-7 · DOI · Paper page
- 2014, Design and Synthesis of Nitrogen-Doped Porous Carbon Materials for CO2 Capture and Investigation of CO2 Sorption Kinetics; 2.4.2
- Coombs D. S., 1997, Canadian Mineralogist, 35, 1571
- Collart, O.Nano design of an Aluminosilicate Framework into a mesoporous MCM-4A Architecture. Ph.D. Dissertation,Universiteti, Antwerpen, 2003.
- Kangwanwatana W., 2013, Chemical Engineering Transactions., 35, 1
- DRAFT: Technology and Applied R&D Needs for Carbon Capture- Beyond 2020, Resource Document for the Workshop on Basic Research needs for Carbon Capture: Beyond 2020, March, 2010, U.S. Department of Energy.
- 10.1016/j.apenergy.2012.11.034 · DOI · Paper page
- 10.1016/j.ijggc.2012.12.014 · DOI
- Buasri A., 2013, Sustainable Energy., 1, 7
- 10.1016/j.fuel.2009.11.019 · DOI · Paper page
- Songolzadeh M., 2012, Sci. World J., 6, 213
- Fauth D. J., 2003, Fuel Chemistry Division Preprints., 48, 169
- Kotyczka-Moranska M., 2012, Adv. Mater. Res., 48, 77
- Dangi G. P., 2012, Indian J. Chem., 51, 1238
- Ramírez-Moreno M. J., 2014, Alkaline and Alkaline-Earth Ceramic Oxides for CO2 Capture, Separation and Subsequent Catalytic Chemical Conversion, Intech
- 10.1039/C4EE01647E · DOI · Paper page
- Ouyang S., 2011, Sustain. Environ. Res., 21, 21
- 10.1016/j.apenergy.2014.02.012 · DOI
- Sciubidło A., 2012, Journal of Power Technologies., 92, 115
- Cho, P.Development and Characterisation of Oxygen-Carrier Materials for Chemical-Looping Combustion, Ph.D. Dissertation,Chalmers University of Technology, Göteborg, Sweden, 2005.
- Aydoğdu, B.Comparison of sorption capacities of hydrocarbons on different samples of MCM-41, Ph.D. Dissertation,Middle East Technical University,Turkey, 2013.
- Hanapimat, K. S. N. K.Synthesis and modification of micro and mesoporous materials as CO 2 adsorbents, Ph.D. Dissertation,Universiti Teknologi Malaysia,Malaysia, 2009.
- Kleitz, F.Ordered Mesoporous Materials: Template Removal, Frameworks and Morphology, Ph.D. Dissertation,Ruhr University Bochum,Germany, 2002.
Cited by
Emerging Multifunctional Metal–Organic Framework Materials
Li, B., Wen, H., Cui, Y., Zhou, W., Qian, G., & Chen, B. (2016) · Advanced Materials · doi:10.1002/adma.201601133 · Cited by 1,587
Porous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
Selective capture of carbon dioxide from hydrocarbons using a metal-organic framework
Qazvini, O. T., Babarao, R., & Telfer, S. G. (2021) · Nature Communications · doi:10.1038/s41467-020-20489-2 · Cited by 350
Acidity and basicity of zeolites: A fundamental approach
Busca, G. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.04.007 · Cited by 290
Ding, N., Li, H., Feng, X., Wang, Q., Wang, S., Ma, L., Zhou, J., & Wang, B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06051 · Cited by 275
Metadata
- Authors
- Sreenivasulu, B., Sreedhar, I., Suresh, P., & Raghavan, K. V.
- Affiliations
- Birla Institute of Technology and Science - Hyderabad Campus (IN)
- Granules India Ltd, Gagillapur, Hyderabad, India
- Indian Institute of Chemical Technology (IN)
- Corresponding author
- Sreedhar, Inkollu
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-10-14
- Volume
- 49
- Issue
- 21
- Pages
- 12641-12661
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2242231821
- Cited by
- 127
- References
- 275
- Citations by year
- 2026: 12 · 2025: 6 · 2024: 16 · 2023: 16 · 2022: 7 · 2021: 7 · 2020: 11 · 2019: 10 · 2018: 10 · 2017: 17 · 2016: 15
- FWCI
- 2.32
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Environmental Science & Technology (publishedVersion)
- PubMed (publishedVersion)
- Funders
- BITS Pilani Hyderabad
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Energy › Fuel Technology › Chemical Looping and Thermochemical Processes
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Keywords
- CO2 capture, CO2 adsorption, porous adsorbents, metal-organic frameworks, carbon adsorbents, porous inorganic materials, flue gas, chemical looping combustion, oxygen uncoupling, adsorption mechanism, isosteric heat of adsorption, CO2 utilization, ammonia synthesis, urea synthesis, coal-fired power plants, pore size
- MeSH terms
- Adsorption, Carbon Dioxide, Oxygen, Urea, Porosity, Climate Change, Carbon Sequestration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.