The DOI matches its Crossref record; 79 of the 80 references it cites were found in a registry or an index.
Facile and Controllable Preparation of Ultramicroporous Biomass-Derived Carbons and Application on Selective Adsorption of Gas-mixtures
Abstract
It is very challenging to prepare biomass-derived porous carbons with well-confined ultramicropores. Traditionally, biomass-derived carbons, via a chemical activation process, possess wide pore size distributions from micropores to macropores. Outstanding BET surface area of 2676 ± 107 m 2 g –1 was obtained with excellent CO 2 uptake of 6.15 and 2.26 mmol g –1 under 1 and 0.15 bar at 273 K. Furthermore, the outstanding CO 2 /N 2, CO 2 /CH 4, and CH 4 /N 2 selectivities of 43.5, 7.4, and 5.9 were obtained on an OTS-1-550 at 298 K and 1 bar. The pore size effect on CO 2 capture and gas-separation performance was carefully investigated, indicating that the ultramicropores (<1 nm) governed the CO 2 adsorption capacity at 1 bar. Also, the vacuum swing adsorption (VSA) processes and breakthrough experiments have confirmed their practical application potential.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They also observed a stable performance of samples in the adsorption/desorption process through fifty cycles.”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [189]
In the citing paper
“Ghanbari and Niu reported a higher H 2 O adsorption capacity of considered samples than commercial adsorbents, which the maximum loading of water vapor on oat hulls was around 630 mg/g at 3 bar and 24 ᵒC, that proved the priority of oat hulls towards molecular sieves (about 230 mg/g), alumina (290 mg/g), and silica gel (420 mg/g).”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [189]
Citations
Cites
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Thermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
Resonant Raman spectroscopy of disordered, amorphous, and diamondlike carbon
Ferrari, A. C., & Robertson, J. (2001) · Physical Review B · doi:10.1103/physrevb.64.075414 · Cited by 2,985
Nitrogen-doped mesoporous carbon of extraordinary capacitance for electrochemical energy storage
Lin, T., Chen, I.-W., Liu, F., Yang, C., Bi, H., Xu, F., & Huang, F. (2015) · Science · doi:10.1126/science.aab3798 · Cited by 2,075
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Pore chemistry and size control in hybrid porous materials for acetylene capture from ethylene
Cui, X., Chen, K., Xing, H., Yang, Q., Krishna, R., Bao, Z., Wu, H., Zhou, W., Dong, X., Han, Y., et al. (2016) · Science · doi:10.1126/science.aaf2458 · Cited by 1,449
Banerjee, R., Furukawa, H., Britt, D., Knobler, C., O’Keeffe, M., & Yaghi, O. M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809459e · Cited by 1,443
Development and Evaluation of Porous Materials for Carbon Dioxide Separation and Capture
Bae, Y., & Snurr, R. Q. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201101891 · Cited by 1,208
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Self-citationRapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Evaluation of energy efficiency of various biogas production and utilization pathways
Pöschl, M., Ward, S., & Owende, P. (2010) · Applied Energy · doi:10.1016/j.apenergy.2010.05.011 · Cited by 783
Kaufman, J. H., Metin, S., & Saperstein, D. D. (1989) · Physical Review B · doi:10.1103/physrevb.39.13053 · Cited by 737
Fabrication of COF-MOF Composite Membranes and Their Highly Selective Separation of H2/CO2
Fu, J., Das, S., Xing, G., Ben, T., Valtchev, V., & Qiu, S. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b03348 · Cited by 614
Optimized Separation of Acetylene from Carbon Dioxide and Ethylene in a Microporous Material
Lin, R.-B., Li, L., Wu, H., Arman, H., Li, B., Lin, R.-G., Zhou, W., & Chen, B. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b03850 · Cited by 559
Effect of HNO3 treatment on the surface acidity of activated carbons
Noh, J. S., & Schwarz, J. A. (1990) · Carbon · doi:10.1016/0008-6223(90)90069-b · Cited by 529
Zhao, Y., Yao, K. X., Teng, B., Zhang, T., & Han, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42548g · Cited by 525
Superior CO2 uptake of N-doped activated carbon through hydrogen-bonding interaction
Xing, W., Liu, C., Zhou, Z., Zhang, L., Zhou, J., Zhuo, S., Yan, Z., Gao, H., Wang, G., & Qiao, S. Z. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21653a · Cited by 500
Wang, R., Wang, P., Yan, X., Lang, J., Peng, C., & Xue, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am302077c · Cited by 475
Adsorption isotherms of microporous-mesoporous solids revisited
Schneider, P. (1995) · Applied Catalysis A: General · doi:10.1016/0926-860x(95)00110-7 · Cited by 466
Wei, H., Deng, S., Hu, B., Chen, Z., Wang, B., Huang, J., & Yu, G. (2012) · ChemSusChem · doi:10.1002/cssc.201200570 · Cited by 421
Self-citationAssessment of the Role of Micropore Size and N-Doping in CO 2 Capture by Porous Carbons
Sevilla, M., Parra, J. B., & Fuertes, A. B. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401423b · Cited by 410
Li, B., Cui, X., O'Nolan, D., Wen, H., Jiang, M., Krishna, R., Wu, H., Lin, R., Chen, Y., Yuan, D., et al. (2017) · Advanced Materials · doi:10.1002/adma.201704210 · Cited by 410
Carbon capture in metal–organic frameworks—a comparative study
Simmons, J. M., Wu, H., Zhou, W., & Yildirim, T. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00700e · Cited by 402
Enhancement of CO2/N2 selectivity in a metal-organic framework by cavity modification
Bae, Y.-S., Farha, O. K., Hupp, J. T., & Snurr, R. Q. (2009) · Journal of Materials Chemistry · doi:10.1039/b900390h · Cited by 392
Microporous Organic Polymers for Methane Storage
Wood, C. D., Tan, B., Trewin, A., Su, F., Rosseinsky, M. J., Bradshaw, D., Sun, Y., Zhou, L., & Cooper, A. I. (2008) · Advanced Materials · doi:10.1002/adma.200702397 · Cited by 386
Singh, G., Kim, I. Y., Lakhi, K. S., Srivastava, P., Naidu, R., & Vinu, A. (2017) · Carbon · doi:10.1016/j.carbon.2017.02.015 · Cited by 379
Guo, Z., Wu, H., Srinivas, G., Zhou, Y., Xiang, S., Chen, Z., Yang, Y., Zhou, W., O'Keeffe, M., & Chen, B. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201007583 · Cited by 370
Xia, Y., Mokaya, R., Walker, G. S., & Zhu, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100061 · Cited by 362
Chitosan derived nitrogen-doped microporous carbons for high performance CO2 capture
Fan, X., Zhang, L., Zhang, G., Shu, Z., & Shi, J. (2013) · Carbon · doi:10.1016/j.carbon.2013.05.026 · Cited by 345
Coromina, H. M., Walsh, D. A., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09202g · Cited by 321
Yuan, B., Wu, X., Chen, Y., Huang, J., Luo, H., & Deng, S. (2013) · Environmental Science & Technology · doi:10.1021/es4000643 · Cited by 305
Self-citationTuning Pore Size in Square‐Lattice Coordination Networks for Size‐Selective Sieving of CO2
Chen, K., Madden, D. G., Pham, T., Forrest, K. A., Kumar, A., Yang, Q., Xue, W., Space, B., Perry, J. J., Zhang, J., et al. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201603934 · Cited by 303
Deng, S., Wei, H., Chen, T., Wang, B., Huang, J., & Yu, G. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.04.115 · Cited by 273
Self-citationZhang, C., Song, W., Ma, Q., Xie, L., Zhang, X., & Guo, H. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b02764 · Cited by 244
Fungi-based porous carbons for CO2 adsorption and separation
Wang, J., Heerwig, A., Lohe, M. R., Oschatz, M., Borchardt, L., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32139d · Cited by 220
Self-citationReticular Synthesis of HKUST-like tbo-MOFs with Enhanced CH4 Storage
Spanopoulos, I., Tsangarakis, C., Klontzas, E., Tylianakis, E., Froudakis, G., Adil, K., Belmabkhout, Y., Eddaoudi, M., & Trikalitis, P. N. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11079 · Cited by 212
Bhunia, A., Boldog, I., Möller, A., & Janiak, C. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13407e · Cited by 208
Nitrogen-doped porous carbon nanofiber webs for efficient CO2 capture and conversion
Li, Y., Zou, B., Hu, C., & Cao, M. (2016) · Carbon · doi:10.1016/j.carbon.2015.11.074 · Cited by 205
Balahmar, N., Mitchell, A. C., & Mokaya, R. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500867 · Cited by 177
Pan, Y., Zhao, Y., Mu, S., Wang, Y., Jiang, C., Liu, Q., Fang, Q., Xue, M., & Qiu, S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00162b · Cited by 168
Activated carbons prepared from peanut shell and sunflower seed shell for high CO2 adsorption
Deng, S., Hu, B., Chen, T., Wang, B., Huang, J., Wang, Y., & Yu, G. (2015) · Adsorption · doi:10.1007/s10450-015-9655-y · Cited by 159
Self-citationArami‐Niya, A., Rufford, T. E., & Zhu, Z. (2016) · Carbon · doi:10.1016/j.carbon.2016.02.098 · Cited by 154
Microporous amine-functionalized aromatic polymers and their carbonized products for CO2 adsorption
Puthiaraj, P., Lee, Y., & Ahn, W. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.03.001 · Cited by 149
Xie, L., & Suh, M. P. (2013) · Chemistry - A European Journal · doi:10.1002/chem.201301822 · Cited by 145
Yang, J., Li, J., Wang, W., Li, L., & Li, J. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie403217n · Cited by 141
Self-citationShao, L., Li, Y., Huang, J., & Liu, Y. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b04533 · Cited by 141
Hong, D. H., & Suh, M. P. (2013) · Chemistry - A European Journal · doi:10.1002/chem.201303801 · Cited by 140
Geng, Z., Xiao, Q., Lv, H. Q., Li, B., Wu, H. B., Lu, Y., & Zhang, C. (2016) · Scientific Reports · doi:10.1038/srep30049 · Cited by 139
Amino-Functionalized SAPO-34 Membranes for CO2/CH4 and CO2/N2 Separation
Venna, S. R., & Carreón, M. A. (2011) · Langmuir · doi:10.1021/la105037n · Cited by 137
Qian, D., Cheng, L., Wang, E., Li, W., & Lu, A. (2013) · ChemSusChem · doi:10.1002/cssc.201300585 · Cited by 130
Triazine-based hyper-cross-linked polymers derived porous carbons for CO2 capture
Shao, L., Wang, S., Liu, M., Huang, J., & Liu, Y. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.01.145 · Cited by 121
Lee, M.-S., Park, M., Kim, H. Y., & Park, S. (2016) · Scientific Reports · doi:10.1038/srep23224 · Cited by 116
Guo, L., Yang, J., Hu, G., Hu, X. D., Wang, L., Dong, Y., DaCosta, H. F. M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00327 · Cited by 114
Self-citationA cost-effective synthesis of heteroatom-doped porous carbons as efficient CO 2 sorbents
Ashourirad, B., Arab, P., İslamoğlu, T., Cychosz, K. A., Thommes, M., & El‐Kaderi, H. M. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06251b · Cited by 110
Liu, R., Ji, W.-J., He, T., Zhang, Z., Zhang, J., & Dang, F. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.052 · Cited by 106
Shao, L., Liu, M., Huang, J., & Liu, Y. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.11.043 · Cited by 106
Sivadas, D. L., Vijayan, S., Rajeev, R., Ninan, K. N., & Prabhakaran, K. (2016) · Carbon · doi:10.1016/j.carbon.2016.07.057 · Cited by 104
Enhanced CO2/N2 selectivity in amidoxime-modified porous carbon
Mahurin, S. M., Górka, J., Nelson, K. M., Mayes, R. T., & Dai, S. (2013) · Carbon · doi:10.1016/j.carbon.2013.10.018 · Cited by 103
Separation of CO2/CH4 using carbon molecular sieve (CMS) at low and high pressure
Rocha, L. A. M., Andreassen, K. A., & Grande, C. A. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.01.071 · Cited by 101
The increased CO 2 adsorption performance of chitosan-derived activated carbons with nitrogen-doping
Fujiki, J., & Yogo, K. (2015) · Chemical Communications · doi:10.1039/c5cc06934c · Cited by 96
Sekizkardes, A. K., İslamoğlu, T., Kahveci, Z., & El‐Kaderi, H. M. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01281j · Cited by 95
Safarifard, V., Rodríguez‐Hermida, S., Guillerm, V., Imaz, I., Bigdeli, M., Tehrani, A. A., Juanhuix, J., Morsali, A., Casco, M. E., Silvestre‐Albero, J., et al. (2016) · Crystal Growth & Design · doi:10.1021/acs.cgd.6b01054 · Cited by 93
Zhu, B., Shang, C., & Guo, Z. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01113 · Cited by 91
Wei, T., Zhang, Q., Wei, X., Gao, Y. L., & Li, H. (2016) · Scientific Reports · doi:10.1038/srep22646 · Cited by 80
Polyurethane-Silica Nanocomposite Membranes for Separation of Propane/Methane and Ethane/Methane
Khosravi, A., Sadeghi, M., Banadkohi, H. Z., & Talakesh, M. M. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie403322w · Cited by 79
Klumpen, C., Breunig, M., Homburg, T., Stock, N., & Senker, J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01949 · Cited by 78
Pires, J., Saini, V. K., & Pinto, M. L. (2008) · Environmental Science & Technology · doi:10.1021/es8014666 · Cited by 77
Yao, K., Chen, Y., Lu, Y., Zhao, Y., & Ding, Y. (2017) · Carbon · doi:10.1016/j.carbon.2017.06.073 · Cited by 71
Sun, F., Liu, X., Gao, J., Pi, X., Wang, L., Qu, Z., & Qin, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08262a · Cited by 68
O-containing hyper-cross-linked polymers and porous carbons for CO 2 capture
Liu, M., Shao, L., Huang, J., & Liu, Y. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.12.036 · Cited by 66
Activated carbon derived from waste coffee grounds for stable methane storage
Kemp, K. C., Baek, S. B., Lee, W., Meyyappan, M., & Kim, K. S. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/38/385602 · Cited by 63
Wang, J., Krishna, R., Yang, J., & Deng, S. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01652 · Cited by 62
Self-citationWang, J., Krishna, R., Yang, J., Dandamudi, K. P. R., & Deng, S. (2015) · Materials Today Communications · doi:10.1016/j.mtcomm.2015.06.009 · Cited by 39
Self-citationPolyfuran-Derived Microporous Carbons for Enhanced Adsorption of CO2 and CH4
Wang, J., Krishna, R., Wu, X., Sun, Y., & Deng, S. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b02390 · Cited by 38
Self-citationThermodynamics and regeneration studies of CO2 adsorption on activated carbon
Cen, Q., Fang, M., Wang, T., Majchrzak‐Kucęba, I., Wawrzyńczak, D., & Luo, Z. (2016) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.1621 · Cited by 36
Effect of nitrogen group on selective separation of CO2/N2 in porous polystyrene
Wang, J., Huang, J., Wu, X., Yuan, B., Sun, Y., Zeng, Z., & Deng, S. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.06.104 · Cited by 30
Self-citationEffect of desorption temperature on CO2 adsorption equilibria of the honeycomb zeolite beds
Kamiuto, K., Abe, S., & Ermalina (2002) · Applied Energy · doi:10.1016/s0306-2619(02)00048-x · Cited by 21
Cited by
Separation and Purification of Hydrocarbons with Porous Materials
Wu, Y., & Weckhuysen, B. M. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202104318 · Cited by 284
Carbon dioxide separation and capture by adsorption: a review
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01589-z · Cited by 275
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101890 · Cited by 237
Activated carbons—preparation, characterization and their application in CO2 capture: A review
Serafin, J., & Dziejarski, B. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-28023-9 · Cited by 179
CO2 capture from biogas by biomass-based adsorbents: A review
Aghel, B., Behaein, S., & Alobaid, F. (2022) · Fuel · doi:10.1016/j.fuel.2022.125276 · Cited by 129
Metadata
- Authors
- Zhang, Y., Zhang, P., Yu, W., Wang, J., Deng, Q., Yang, J., Zeng, Z., Xu, M., & Deng, S.
- Affiliations
- Nanchang University (CN)
- Taiyuan University of Science and Technology (CN)
- Arizona State University (US)
- Corresponding author
- Wang, Jun
- Deng, Shuguang
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-09-26
- Volume
- 57
- Issue
- 42
- Pages
- 14191-14201
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2892406245
- Cited by
- 30
- References
- 80
- Citations by year
- 2025: 1 · 2024: 2 · 2023: 6 · 2022: 10 · 2021: 5 · 2020: 3 · 2019: 3
- FWCI
- 1.76
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Industrial & Engineering Chemistry Research (publishedVersion)
- Funders
- Nanchang University
- Arizona State University
- National Natural Science Foundation of China (1672186)
- Central Committee of the Communist Party of China
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Chemistry › Inorganic Chemistry › Metal-Organic Frameworks: Synthesis and Applications
- Keywords
- biomass-derived carbon, ultramicroporous carbon, porous carbon, CO2 adsorption, gas separation, CO2/N2 selectivity, CO2/CH4 selectivity, pore size effects, vacuum swing adsorption, breakthrough experiments, chemical activation, biomass pyrolysis, CO2 capture
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.