Why is Recycling of Postconsumer Plastics so Challenging?
The DOI matches its Crossref record; 228 of the 228 references it cites were found in a registry or an index.
Abstract
The ubiquitous use of plastics has been driven by their combination of low cost and properties, but these attributes directly challenge waste management schemes for plastic recycling. Some postconsumer recycling programs are now nearly 50 years old, but a significant fraction of plastics still finds landfills or other dumping strategies at their end of life. With the growing concern regarding plastic waste, especially ocean plastics, there is a need for innovation and alternative strategies for the economic translation of plastic waste to valued product(s) that will promote their efficient circular utilization. This review first describes the technical and economic hurdles associated with the recycling of postconsumer plastics, but then it focuses on providing an overview of emergent strategies to recover plastic waste through new polymer design, new recycling processes, and chemical transformations to value-added products. Specific challenges discussed include plastic waste sorting and separations, product variability including additives, and the high efficiency/low cost in which the existing petrochemical industry can produce virgin polymers, in particular polyolefins. Although a wide variety of technical strategies have been demonstrated for recycling of plastics through both mechanical and chemical means, the commercial success of these different strategies is generally limited by either performance, including large variance in key metrics, or economics where the products can match the performance of virgin materials but the recycling process is expensive. Successful capture of postconsumer plastic waste through recycling likely will depend on economic incentives and government regulations.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Mechanical recycling of plastics is largely unsuccessful for preserving their value or as a waste remediation strategy-only around 9% of all plastics have been recycled”
From Chemically recyclable polyolefin-like multiblock polymers (2023) · cites this paper as [5]
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Accumulation and fragmentation of plastic debris in global environments
Barnes, D. K. A., Galgani, F., Thompson, R. C., & Barlaz, M. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0205 · Cited by 6,126
Hahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873
Predicted growth in plastic waste exceeds efforts to mitigate plastic pollution
Borrelle, S. B., Ringma, J., Law, K. L., Monnahan, C. C., Lebreton, L., McGivern, A., Murphy, E., Jambeck, J., Leonard, G. H., Hilleary, M. A., et al. (2020) · Science · doi:10.1126/science.aba3656 · Cited by 3,219
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
The global threat from plastic pollution
MacLeod, M., Arp, H. P. H., Tekman, M. B., & Jahnke, A. (2021) · Science · doi:10.1126/science.abg5433 · Cited by 2,951
Transport and release of chemicals from plastics to the environment and to wildlife
Teuten, E. L., Saquing, J. M., Knappe, D. R. U., Barlaz, M. A., Jonsson, S., Björn, A., Rowland, S. J., Thompson, R. C., Galloway, T. S., Yamashita, R., et al. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0284 · Cited by 2,938
Alimi, O. S., Farner Budarz, J., Hernandez, L. M., & Tufenkji, N. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b05559 · Cited by 2,668
Applications and societal benefits of plastics
Andrady, A. L., & Neal, M. A. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0304 · Cited by 2,464
An engineered PET depolymerase to break down and recycle plastic bottles
Tournier, V., Topham, C. M., Gilles, A., David, B., Folgoas, C., Moya-Leclair, E., Kamionka, E., Desrousseaux, M.-L., Texier, H., Gavalda, S., et al. (2020) · Nature · doi:10.1038/s41586-020-2149-4 · Cited by 2,176
Research works printed but not linked: 9
- Fullerton D., 1996, Am. Econ. Rev., 86, 971
- 10.1002/(sici)1521-4125(199912)22:12<997::aid-ceat997>3.0.co;2-y · doi:10.1002/(sici)1521-4125(199912)22:12<997::aid-ceat997>3.0.co;2-y
- 2021, PCT 10-Q filing for PureCycle
- OnColor IR Sortable Black Infraread Sortable Black for Recyclable Packaging ; https://www.avient.com/sites/default/files/2020-08/detectable-blacks-product-bulletin.pdf (accessed April 10, 2021).
- 10.1002/(sici)1099-0518(20000615)38:12<2137::aid-pola20>3.0.co;2-d · doi:10.1002/(sici)1099-0518(20000615)38:12<2137::aid-pola20>3.0.co;2-d
- 2019, BP’s New Technology to Enable Circularity for Unrecyclable PET Plastic Waste
- 2021, Eastman and Governor Lee Announce World-Scale Plastic-to-Plastic Molecular Recycling Facility to be Built in Kingsport
- 2020, Carbios Produces First Clear Plastic Bottles from Enzymatically Recycled Textile Waste
- 10.1002/(sici)1521-4125(199810)21:10<777::aid-ceat777>3.0.co;2-l · doi:10.1002/(sici)1521-4125(199810)21:10<777::aid-ceat777>3.0.co;2-l
Cited by
Dokl, M., Copot, A., Krajnc, D., Fan, Y. V., Vujanović, A., Aviso, K. B., Tan, R. R., Kravanja, Z., & Čuček, L. (2024) · Sustainable Production and Consumption · doi:10.1016/j.spc.2024.09.025 · Cited by 407
Rational Design of Chemical Catalysis for Plastic Recycling
Chu, M., Liu, Y., Lou, X., Zhang, Q., & Chen, J. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c01286 · Cited by 392
Mohanty, A. K., Wu, F., Mincheva, R., Hakkarainen, M., Raquez, J.-M., Mielewski, D. F., Narayan, R., Netravali, A. N., & Misra, M. (2022) · Nature Reviews Methods Primers · doi:10.1038/s43586-022-00124-8 · Cited by 355
Catalytic Upcycling of Polyolefins
Sun, J., Dong, J., Gao, L., Zhao, Y.-Q., Moon, H., & Scott, S. L. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00943 · Cited by 317
Plastic Waste Recycling─A Chemical Recycling Perspective
Schade, A., Melzer, M., Zimmermann, S., Schwarz, T., Stoewe, K., & Kuhn, H. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c02551 · Cited by 273
Review of polymer technologies for improving the recycling and upcycling efficiency of plastic waste
Jung, H., Shin, G., Kwak, H., Hao, L. T., Jegal, J., Kim, H. J., Jeon, H., Park, J., & Oh, D. X. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.138089 · Cited by 271
The future of bioplastics in food packaging: An industrial perspective
Ghasemlou, M., Barrow, C. J., & Adhikari, B. (2024) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2024.101279 · Cited by 199
A focused review on recycling and hydrolysis techniques of polyethylene terephthalate
Abedsoltan, H. (2023) · Polymer Engineering & Science · doi:10.1002/pen.26406 · Cited by 206
Sustainable developments in polyolefin chemistry: Progress, challenges, and outlook
Wang, X.-Y., Gao, Y., & Tang, Y. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101713 · Cited by 204
Synthesis and Deconstruction of Polyethylene-type Materials
Schwab, S. T., Baur, M., Nelson, T. F., & Mecking, S. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00587 · Cited by 194
Chemically recyclable polyolefin-like multiblock polymers
Zhao, Y., Rettner, E. M., Harry, K. L., Hu, Z., Miscall, J., Rorrer, N. A., & Miyake, G. M. (2023) · Science · doi:10.1126/science.adh3353 · Cited by 205
Lubongo, C., & Alexandridis, P. (2022) · Recycling · doi:10.3390/recycling7020011 · Cited by 165
Reversed Controlled Polymerization (RCP): Depolymerization from Well-Defined Polymers to Monomers
Jones, G. R., Wang, H. S., Parkatzidis, K., Whitfield, R., Truong, N. P., & Anastasaki, A. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.3c00589 · Cited by 187
Chemical recycling of mixed textile waste
Andini, E., Bhalode, P., Gantert, E., Sadula, S., & Vlachos, D. G. (2024) · Science Advances · doi:10.1126/sciadv.ado6827 · Cited by 175
“Mixed textile waste requires costly sorting and separation before reprocessing to avoid an undesirable mixture of products ( 13 , 14 ).”
Rashid, A. A., & Koç, M. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100529 · Cited by 233
Jagadeesh, P., Mavinkere Rangappa, S., Siengchin, S., Puttegowda, M., Thiagamani, S. M. K., G., R., Hemath Kumar, M., Oladijo, O. P., Fiore, V., & Moure Cuadrado, M. M. (2022) · Polymer Composites · doi:10.1002/pc.27000 · Cited by 162
Plastics pollution exacerbates the impacts of all planetary boundaries
Villarrubia-Gómez, P., Almroth, B. C., Eriksen, M., Ryberg, M. W., & Cornell, S. (2024) · One Earth · doi:10.1016/j.oneear.2024.10.017 · Cited by 196
A two-stage strategy for upcycling chlorine-contaminated plastic waste
Kots, P. A., Vance, B. C., Quinn, C. M., Wang, C., & Vlachos, D. G. (2023) · Nature Sustainability · doi:10.1038/s41893-023-01147-z · Cited by 159
“This makes mechanical recycling very challenging 8 .”
BackgroundLubongo, C., Daej, M. A. A. B., & Alexandridis, P. (2024) · Recycling · doi:10.3390/recycling9040059 · Cited by 164
Kassab, A., Al Nabhani, D., Mohanty, P., Pannier, C., & Ayoub, G. Y. (2023) · Polymers · doi:10.3390/polym15193881 · Cited by 141
“X-ray technology is also utilized to sort plastics based on their elemental composition, which is particularly useful for identifying and separating PVC containers due to their high chlorine content [35,93,94].”
BackgroundMerino, D., Quilez‐Molina, A. I., Perotto, G., Bassani, A., Spigno, G., & Athanassiou, A. (2022) · Green Chemistry · doi:10.1039/d1gc03904k · Cited by 136
Nanocatalyzed Upcycling of the Plastic Wastes for a Circular Economy
Wang, C., Han, H., Wu, Y., & Astruc, D. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214422 · Cited by 131
Abrishami, S., Shirali, A., Sharples, N., Kartal, G. E., Macintyre, L., & Doustdar, O. (2024) · Textile Research Journal · doi:10.1177/00405175241247806 · Cited by 145
“155,156 There are several economic and policy barriers against the effective implementation of textile recycling.”
Light-driven polymer recycling to monomers and small molecules
Wimberger, L., Ng, G., & Boyer, C. A. (2024) · Nature Communications · doi:10.1038/s41467-024-46656-3 · Cited by 141
“2b) making their depolymerization either extremely energy intensive or impossible when the decomposition occurs at temperatures below T c , for example for poly(lactic acid) (PLA) 21,24,25 .”
BackgroundClosing the Carbon Loop in the Circular Plastics Economy
Schirmeister, C. G., & Mülhaupt, R. (2022) · Macromolecular Rapid Communications · doi:10.1002/marc.202200247 · Cited by 130
Yan, T., Balzer, A. H., Herbert, K. M., Epps, T. H. I., & Korley, L. T. J. (2023) · Chemical Science · doi:10.1039/d3sc00551h · Cited by 124
The Key to Solving Plastic Packaging Wastes: Design for Recycling and Recycling Technology
Ding, Q., & Zhu, H. (2023) · Polymers · doi:10.3390/polym15061485 · Cited by 116
A reusable, impurity-tolerant and noble metal–free catalyst for hydrocracking of waste polyolefins
Qiu, Z., Lin, S., Chen, Z., Chen, A., Zhou, Y., Cao, X., Wang, Y., & Lin, B. (2023) · Science Advances · doi:10.1126/sciadv.adg5332 · Cited by 126
“However, only used plastics meeting stringent requirements of purity can be recycled mechanically ( 2 ).”
Cascade degradation and upcycling of polystyrene waste to high-value chemicals
Xu, Z., Pan, F., Sun, M., Xu, J., Munyaneza, N. E., Croft, Z. L., Cai, G. G., & Liu, G. (2022) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2203346119 · Cited by 128
“In addition, the products are often a complex mixture, and their economic value fluctuates around the wholesale price of virgin plastics (32).”
BackgroundCuthbertson, A. A., Lincoln, C. L., Miscall, J., Stanley, L. M., Maurya, A. K., Asundi, A. S., Tassone, C. J., Rorrer, N. A., & Beckham, G. T. (2024) · Green Chemistry · doi:10.1039/d4gc00659c · Cited by 121
Advances in Nonreactive Polymer Compatibilizers for Commodity Polyolefin Blends
Lin, T.-W., Padilla-Vélez, O., Kaewdeewong, P., LaPointe, A. M., Coates, G. W., & Eagan, J. M. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00047 · Cited by 111
The thermodynamics and kinetics of depolymerization: what makes vinyl monomer regeneration feasible?
Lohmann, V., Jones, G. R., Truong, N. P., & Anastasaki, A. (2023) · Chemical Science · doi:10.1039/d3sc05143a · Cited by 106
Recent advances in polyvinyl chloride ( PVC ) recycling
Ait‐Touchente, Z., Khellaf, M., Raffin, G., Lebaz, N., & Elaïssari, A. (2023) · Polymers for Advanced Technologies · doi:10.1002/pat.6228 · Cited by 116
“As a result, the yield of recycled PVC is often lower than desired, reducing the overall effectiveness of the recycling process [250,251].”
Wu, L.-J., Lee, W., Kumar Ganta, P., Chang, Y.-L., Chang, Y.-C., & Chen, H.-Y. (2023) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214847 · Cited by 96
Nath, D., Misra, M., Al-Daoud, F., & Mohanty, A. K. (2025) · RSC Sustainability · doi:10.1039/d4su00193a · Cited by 93
Abbas‐Abadi, M. S., Kusenberg, M., Zayoud, A., Roosen, M., Vermeire, F. H., Madanikashani, S., Kuzmanović, M., Parvizi, B., Kresovic, U., Meester, S. D., et al. (2023) · Waste Management · doi:10.1016/j.wasman.2023.04.029 · Cited by 83
Less carbon producing sustainable concrete from environmental and performance perspectives: A review
Tayebani, B., Said, A. M., & Memari, A. M. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.133234 · Cited by 89
Applications of plastics in the automotive industry: Current trends and future perspectives
Abedsoltan, H. (2023) · Polymer Engineering and Science · doi:10.1002/pen.26604 · Cited by 83
The Frontier of Plastics Recycling: Rethinking Waste as a Resource for High‐Value Applications
Mangold, H. S., & von Vacano, B. (2022) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202100488 · Cited by 92
Circular Polyolefins: Advances toward a Sustainable Future
Hassanian-Moghaddam, D., Asghari, N., & Ahmadi, M. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00872 · Cited by 79
Ma, C., Kumagai, S., Saito, Y., Yoshioka, T., Huang, X., Shao, Y., Ran, J., & Sun, L. (2024) · Environmental Science & Technology · doi:10.1021/acs.est.3c09451 · Cited by 77
Blanchard, R., & Mekonnen, T. H. (2024) · RSC Applied Polymers · doi:10.1039/d4lp00016a · Cited by 85
Selective deconstruction of mixed plastics by a tailored organocatalyst
Arifuzzaman, M., Sumpter, B. G., Demchuk, Z., Do, C., Arnould, M. A., Rahman, M. A., Cao, P., Popovs, I., Davis, R. J., Dai, S., et al. (2023) · Materials Horizons · doi:10.1039/d3mh00801k · Cited by 72
Carniel, A., dos Santos, N. F., Buarque, F. S., Resende, J. V. M., Ribeiro, B. D., Marrucho, I. M., Coelho, M. A. Z., & de Castro, A. M. (2024) · Green Chemistry · doi:10.1039/d4gc00528g · Cited by 65
Blockchain-Based Management of Recyclable Plastic Waste
Bułkowska, K., Zielińska, M., & Bułkowski, M. (2024) · Energies · doi:10.3390/en17122937 · Cited by 74
Critical Evaluation of Life Cycle Assessment Analyses of Plastic Waste Pyrolysis
Costa, L. P. D. M., de Miranda, D. M. V., & Pinto, J. C. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c00265 · Cited by 70
Shen, L., Gorbea, G. D., Danielson, E., Cui, S., Ellison, C. J., & Bates, F. S. (2023) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2301352120 · Cited by 64
“However, sorting polyolefin products in a recycle stream by flotation or optical methods is largely ineffective due to similar densities and virtually identical chemical structures (both are saturated hydrocarbons) (19).”
BackgroundUpcycling plastic wastes into value-added products via electrocatalysis and photoelectrocatalysis
Kim, S., Kong, D., Zheng, X., & Park, J. H. (2024) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2024.01.010 · Cited by 68
Biodegradation of 3D-Printed Biodegradable/Non-biodegradable Plastic Blends
Choe, S., Kim, Y., Park, G., Lee, D. H., Park, J., Mossisa, A. T., Lee, S., & Myung, J. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00600 · Cited by 62
Plastic Recycling: A Review on Life Cycle, Methods, Misconceptions, and Techno‐Economic Analysis
Salahuddin, U., Sun, J., Zhu, C., Wu, M., Zhao, B., & Gao, P. (2023) · Advanced Sustainable Systems · doi:10.1002/adsu.202200471 · Cited by 65
Chaudhari, U. S., Johnson, A. T., Reck, B. K., Handler, R. M., Thompson, V. S., Hartley, D. S., Young, W., Watkins, D., & Shonnard, D. R. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c04004 · Cited by 61
Wang, J., Jiang, J., Wang, X., Liu, S., Shen, X., Cao, X., Sun, Y., Dong, L. R., Meng, X., Ragauskas, A. J., et al. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.136360 · Cited by 58
Cook, E., Cano, N. S. D. S. L., & Velis, C. A. (2024) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2024.107588 · Cited by 64
Advances in catalytic chemical recycling of synthetic textiles
Moreno‐Marrodán, C., Brandi, F., Barbaro, P., & Liguori, F. (2024) · Green Chemistry · doi:10.1039/d4gc04768k · Cited by 61
Sustainability and Polyesters: Beyond Metals and Monomers to Function and Fate
Hoe, G. X. D., Şucu, T., & Shaver, M. P. (2022) · Accounts of Chemical Research · doi:10.1021/acs.accounts.2c00134 · Cited by 55
Sustainable catalytic strategies for the transformation of plastic wastes into valued products
Li, X., Wang, J., Zhang, T., Yang, S., Sun, M., Qian, X., Wang, T., & Zhao, Y. (2023) · Chemical Engineering Science · doi:10.1016/j.ces.2023.118729 · Cited by 56
Johansen, M. B., Donslund, B. S., Larsen, E., Olsen, M. B., Pedersen, J. A. L., Boye, M., Smedsgård, J. K. C., Heck, R., Kristensen, S. K., & Skrydstrup, T. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c01469 · Cited by 58
Cook, E., Velis, C. A., & Cottom, J. W. (2022) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x221105415 · Cited by 54
“‘Contaminants’ are removed during several sorting steps that prepare the material for reprocessing including size reduction (comminution), separation by density (sink/float), washing (either hot, cold and or with chemicals) and optical separation (near infrared or laser) (Vogt et al., 2021).”
BackgroundProgress in food packaging applications of biopolymer-nanometal composites — A comprehensive review
Chandrababu, V., Parameswaranpillai, J., Gopi, J. A., Pathak, C., D., M. D. C., Ng, L. F., Krishnasamy, S., Muthukumar, C., Hameed, N., & Ganguly, S. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.213921 · Cited by 55
Challenges and Opportunities for Recycled Polyethylene Fishing Nets: Towards a Circular Economy
Juan, R., Domínguez, C., Robledo, N., Paredes, B., Galera, S., & García‐Muñoz, R. A. (2021) · Polymers · doi:10.3390/polym13183155 · Cited by 56
Recent Progress for Designing of Catalysts for Photothermal Conversion of Plastic Wastes
He, D., Huang, G., Zhou, Z., Hu, Q., Ding, J., Wu, J., Li, M., Ruan, X., Jiao, X., & Xie, Y. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202419801 · Cited by 64
Bioengineering textiles across scales for a sustainable circular economy
Schiros, T. N., Mosher, C. Z., Zhu, Y., Bina, T., Gomez, V., Lee, C. L., Lu, H. H., & Obermeyer, A. C. (2021) · Chem · doi:10.1016/j.chempr.2021.10.012 · Cited by 57
Venkatachalam, V., Pohler, M., Spierling, S., Nickel, L., Barner, L., & Endres, H. (2022) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202200046 · Cited by 44
Ionic-Liquid-Mediated Deconstruction of Polymers for Advanced Recycling and Upcycling
Christoff‐Tempesta, T., & Epps, T. H. I. (2023) · ACS Macro Letters · doi:10.1021/acsmacrolett.3c00276 · Cited by 50
Wang, R., Lin, Z., Wang, Y., Zhang, K., Zhang, G., Zhang, J., Mao, S. S., & Shen, S. (2024) · Rare Metals · doi:10.1007/s12598-024-02714-9 · Cited by 48
Microbial and Enzymatic Biodegradation of Plastic Waste for a Circular Economy
Akram, M. A., Savitha, R., Kinsella, G. K., Nolan, K. J. M., Ryan, B. J., & HENEHAN, G. T. M. (2024) · Applied Sciences · doi:10.3390/app142411942 · Cited by 52
Barrat, J., Gado, E. D., Egelhaaf, S. U., Mao, X., Dijkstra, M., Pine, D. J., Kumar, S. K., Bishop, K. J. M., Gang, O., Obermeyer, A. C., et al. (2023) · Journal of Physics Materials · doi:10.1088/2515-7639/ad06cc · Cited by 64
Self-citationAbdullah, M., & Abedin, M. Z. (2024) · Results in Surfaces and Interfaces · doi:10.1016/j.rsurfi.2024.100221 · Cited by 57
Optical detection of plastic waste through computer vision
Shukhratov, I., Pimenov, A., Stepanov, A., Mikhailova, N., Baldycheva, A. V., & Somov, A. (2024) · Intelligent Systems with Applications · doi:10.1016/j.iswa.2024.200341 · Cited by 44
ECCDN-Net: A deep learning-based technique for efficient organic and recyclable waste classification
Islam, M. S. B., Sumon, M. S. I., Majid, M. E., Kashem, S. B. A., Nashbat, M., Ashraf, A., Khandakar, A. A., Kunju, A. K. A., Hasan-Zia, M., & Chowdhury, M. E. H. (2024) · Waste Management · doi:10.1016/j.wasman.2024.12.023 · Cited by 49
Integrated low-temperature PVC and polyolefin upgrading
Zhang, W., Yang, B., Jackson, B. A., Zhao, J., Shi, H., Camaioni, D. M., Kim, S., Wang, H., Szanyi, J., Lee, M., et al. (2025) · Science · doi:10.1126/science.adx5285 · Cited by 44
Mechanical Recycling of Mixed Plastics by Supramolecular Dynamic Cross-Linking Strategy
Chen, J., Wang, W., Zou, C., & Chen, C. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.5c06330 · Cited by 47
Food packaging use and post-consumer plastic waste management: a comprehensive review
Operato, L., Panzeri, A., Masoero, G., Gallo, A., Gomes, L., & Hamd, W. S. (2025) · Frontiers in Food Science and Technology · doi:10.3389/frfst.2025.1520532 · Cited by 48
LitChemPlast : An Open Database of Chemicals Measured in Plastics
Wiesinger, H., Shalin, A., Huang, X., Siegrist, A., Plinke, N., Hellweg, S., & Wang, Z. (2024) · Environmental Science & Technology Letters · doi:10.1021/acs.estlett.4c00355 · Cited by 41
Chang, H., Kim, M. S., Huber, G. W., & Dumesic, J. A. (2021) · Green Chemistry · doi:10.1039/d1gc02865k · Cited by 39
Ravina, M., Bianco, I., Ruffino, B., Minardi, M., Panepinto, D., & Zanetti, M. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136227 · Cited by 39
Design of Copolymer‐Based Blend Compatibilizers for Mixed Plastic Recycling
Qian, J., Dunn, C. B., & Qiang, Z. (2023) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202300291 · Cited by 39
Yang, C., Xu, T., & Ye, J. (2024) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2024.107962 · Cited by 38
Melt-Based Additive Manufacturing of Polyolefins Using Material Extrusion and Powder Bed Fusion
Das, A., Bryant, J. S., Williams, C. B., & Bortner, M. J. (2023) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2023.2220024 · Cited by 37
“[260] Future research should be directed toward establishing a reliable method to recycle post-consumer plastics; a path that is fraught with difficulties as reviewed by Vogt et al.[261] Although the addition of fillers enhances the mechanical performance of the polyolefin printed parts, they are challenging to recycl…”
MethodA review of current challenges and legal advances in the global management of plastic waste
Seay, J. R., & Ternes, M. E. (2022) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-022-02289-y · Cited by 38
“Most plastics products are produced from a formulation that includes additives like colors and dyes, fillers, UV protectants, fire retardants, reinforcements, and plasticizers, among many others (Vogt et al. 2021).”
BackgroundKumar, S., Sajwan, D., Sharma, D., & Krishnan, V. (2025) · Advanced Sustainable Systems · doi:10.1002/adsu.202500003 · Cited by 38
Self-citationGritsch, L., Breslmayer, G., Rainer, R., Stipanović, H., Tischberger-Aldrian, A., & Lederer, J. (2024) · Waste Management · doi:10.1016/j.wasman.2024.05.035 · Cited by 36
Closed‐Loop Recycling of Mixed Plastics of Polyester and CO2‐Based Polycarbonate to a Single Monomer
Shi, C., Diment, W. T., & Chen, E. Y. ‐. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202405083 · Cited by 36
Marxsen, S. F., Song, D., Zhang, X., Flores, I., Fernández, J., Sarasua, J.-R., Müller, A. J., & Alamo, R. G. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00308 · Cited by 34
A review on microplastics degradation with MOF: Mechanism and action
Nikhar, S., Kumar, P., & Chakraborty, M. (2024) · Next Nanotechnology · doi:10.1016/j.nxnano.2024.100060 · Cited by 39
Bonifazi, G., Capobianco, G., & Serranti, S. (2023) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2023.107068 · Cited by 32
Polymer Recycling: A Comprehensive Overview and Future Outlook
van den Tempel, P., & Picchioni, F. (2024) · Recycling · doi:10.3390/recycling10010001 · Cited by 33
Srivastava, R. K., Sarangi, P. K., Singh, A. K., Parveen, A., Sahoo, U. K., Padil, V. V. T., Abass, K. S., Jumaniyozov, K., Onn, C. W., & Kurniawan, T. A. (2025) · RSC Sustainability · doi:10.1039/d5su00421g · Cited by 49
Wang, Y., Ma, W., Jian, Z., Zhang, X., Yang, X., Lu, X., Wang, Z., & Xia, H. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c01857 · Cited by 31
Gaduan, A. N., Li, J., Hill, G., Wallis, C., Burgstaller, C., & Lee, K. (2022) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2022.106734 · Cited by 32
“The incorporation of post-consumer recyclates (PCRs) into plastic packaging still represents a significant technical challenge particularly for food contact applications (Cecon et al., 2021; Vogt et al., 2021).”
Mitigating persistent organic pollutants from marine plastics through enhanced recycling: A review
Ibrahim, I. A., Rawindran, H., Alam, M. M., Leong, W. H., Sahrin, N. T., Ng, H. S., Chan, Y. J., Abdelfattah, E. A., Lim, J. W., Aliyu, U. S., et al. (2023) · Environmental Research · doi:10.1016/j.envres.2023.117533 · Cited by 32
Bio-based unsaturated polyester resin from post-consumer PET
Rubeš, D., Vinklárek, J., Podzimek, Š., & Honzíček, J. (2024) · RSC Advances · doi:10.1039/d3ra08500g · Cited by 32
Kränzlein, M., Cui, S., Hu, J. E., LaPointe, A. M., Fors, B. P., & Coates, G. W. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.5c03869 · Cited by 32
Karimi, N. (2023) · Sustainability · doi:10.3390/su151813290 · Cited by 30
Tran, X. T., Kim, E. S., Mun, D. H., Jung, T., Shin, J., Kang, N. Y., Park, Y.-K., & Kim, D. K. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c03763 · Cited by 30
Blanco, A., Juan, R., Paredes, B., Domínguez, C., & García‐Muñoz, R. A. (2025) · Polymer Testing · doi:10.1016/j.polymertesting.2025.108855 · Cited by 29
Thiol–ene Click Chemistry Incorporates Hydroxyl Functionality on Polycyclooctene to Tune Properties
Chethalen, R. J., Fastow, E. J., Coughlin, E. B., & Winey, K. I. (2023) · ACS Macro Letters · doi:10.1021/acsmacrolett.2c00670 · Cited by 29
Hydrolytic depolymerisation of polyesters over heterogeneous ZnO catalyst
Liguori, F., Moreno‐Marrodán, C., Oberhauser, W., Passaglia, E., & Barbaro, P. (2023) · RSC Sustainability · doi:10.1039/d3su00089c · Cited by 30
Jung, J., Lee, T., Jung, S., Tsang, Y. F., Bhatnagar, A., Lee, S. S., Song, H., Park, W.-K., & Kwon, E. E. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.136358 · Cited by 28
Conversion of Compositionally Diverse Plastic Waste over Earth-Abundant Sulfides
Selvam, E., Schyns, Z. O. G., Sun, J. A., Kots, P. A., Kwak, Y., Korley, L. T. J., Lobo, R. F., & Vlachos, D. G. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.4c18001 · Cited by 27
Metadata
- Authors
- Vogt, B. D., Stokes, K. K., & Kumar, S. K.
- Affiliations
- Pennsylvania State University (US)
- Geisys Ventures, LLC, Lunenburg, Massachusetts 01462, United States
- Columbia University (US)
- Corresponding author
- Vogt, Bryan D.
- Venue
- ACS Applied Polymer Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-08-23
- Volume
- 3
- Issue
- 9
- Pages
- 4325-4346
- ISSN
- 2637-6105 (ISSN-L)
- OpenAlex
- W3193988466
- Cited by
- 385
- References
- 225
- Citations by year
- 2026: 84 · 2025: 105 · 2024: 87 · 2023: 66 · 2022: 38 · 2021: 5
- FWCI
- 17.37
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Polymer Materials (publishedVersion)
- Funders
- Pennsylvania State University
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Keywords
- plastic recycling, plastic waste management, plastic sorting, polymer additives, polyolefins, mechanical recycling, chemical recycling, value-added products, circular economy, ocean plastic, recycling economics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.