Why is Recycling of Postconsumer Plastics so Challenging?
The DOI matches its Crossref record; 228 of the 228 references it cites were found in a registry or an index.
Abstract
The ubiquitous use of plastics has been driven by their combination of low cost and properties, but these attributes directly challenge waste management schemes for plastic recycling. Some postconsumer recycling programs are now nearly 50 years old, but a significant fraction of plastics still finds landfills or other dumping strategies at their end of life. With the growing concern regarding plastic waste, especially ocean plastics, there is a need for innovation and alternative strategies for the economic translation of plastic waste to valued product(s) that will promote their efficient circular utilization. This review first describes the technical and economic hurdles associated with the recycling of postconsumer plastics, but then it focuses on providing an overview of emergent strategies to recover plastic waste through new polymer design, new recycling processes, and chemical transformations to value-added products. Specific challenges discussed include plastic waste sorting and separations, product variability including additives, and the high efficiency/low cost in which the existing petrochemical industry can produce virgin polymers, in particular polyolefins. Although a wide variety of technical strategies have been demonstrated for recycling of plastics through both mechanical and chemical means, the commercial success of these different strategies is generally limited by either performance, including large variance in key metrics, or economics where the products can match the performance of virgin materials but the recycling process is expensive. Successful capture of postconsumer plastic waste through recycling likely will depend on economic incentives and government regulations.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Mechanical recycling of plastics is largely unsuccessful for preserving their value or as a waste remediation strategy-only around 9% of all plastics have been recycled”
From Chemically recyclable polyolefin-like multiblock polymers (2023) · cites this paper as [5]
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Accumulation and fragmentation of plastic debris in global environments
Barnes, D. K. A., Galgani, F., Thompson, R. C., & Barlaz, M. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0205 · Cited by 6,126
Hahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873
Predicted growth in plastic waste exceeds efforts to mitigate plastic pollution
Borrelle, S. B., Ringma, J., Law, K. L., Monnahan, C. C., Lebreton, L., McGivern, A., Murphy, E., Jambeck, J., Leonard, G. H., Hilleary, M. A., et al. (2020) · Science · doi:10.1126/science.aba3656 · Cited by 3,219
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
The global threat from plastic pollution
MacLeod, M., Arp, H. P. H., Tekman, M. B., & Jahnke, A. (2021) · Science · doi:10.1126/science.abg5433 · Cited by 2,951
Transport and release of chemicals from plastics to the environment and to wildlife
Teuten, E. L., Saquing, J. M., Knappe, D. R. U., Barlaz, M. A., Jonsson, S., Björn, A., Rowland, S. J., Thompson, R. C., Galloway, T. S., Yamashita, R., et al. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0284 · Cited by 2,938
Alimi, O. S., Farner Budarz, J., Hernandez, L. M., & Tufenkji, N. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b05559 · Cited by 2,668
Applications and societal benefits of plastics
Andrady, A. L., & Neal, M. A. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0304 · Cited by 2,464
An engineered PET depolymerase to break down and recycle plastic bottles
Tournier, V., Topham, C. M., Gilles, A., David, B., Folgoas, C., Moya-Leclair, E., Kamionka, E., Desrousseaux, M.-L., Texier, H., Gavalda, S., et al. (2020) · Nature · doi:10.1038/s41586-020-2149-4 · Cited by 2,176
Research works printed but not linked: 9
- Fullerton D., 1996, Am. Econ. Rev., 86, 971
- 10.1002/(sici)1521-4125(199912)22:12<997::aid-ceat997>3.0.co;2-y · doi:10.1002/(sici)1521-4125(199912)22:12<997::aid-ceat997>3.0.co;2-y
- 2021, PCT 10-Q filing for PureCycle
- OnColor IR Sortable Black Infraread Sortable Black for Recyclable Packaging ; https://www.avient.com/sites/default/files/2020-08/detectable-blacks-product-bulletin.pdf (accessed April 10, 2021).
- 10.1002/(sici)1099-0518(20000615)38:12<2137::aid-pola20>3.0.co;2-d · doi:10.1002/(sici)1099-0518(20000615)38:12<2137::aid-pola20>3.0.co;2-d
- 2019, BP’s New Technology to Enable Circularity for Unrecyclable PET Plastic Waste
- 2021, Eastman and Governor Lee Announce World-Scale Plastic-to-Plastic Molecular Recycling Facility to be Built in Kingsport
- 2020, Carbios Produces First Clear Plastic Bottles from Enzymatically Recycled Textile Waste
- 10.1002/(sici)1521-4125(199810)21:10<777::aid-ceat777>3.0.co;2-l · doi:10.1002/(sici)1521-4125(199810)21:10<777::aid-ceat777>3.0.co;2-l
Cited by
Items 101–200 of 402
Correlating Near-Infrared Spectra to Bulk Properties in Polyolefins
Sutliff, B. P., Goyal, S., Martin, T. B., Beaucage, P. A., Audus, D. J., & Orski, S. V. (2024) · Macromolecules · doi:10.1021/acs.macromol.3c02290 · Cited by 26
Sutliff, B. P., Beaucage, P. A., Audus, D. J., Orski, S. V., & Martin, T. B. (2024) · Digital Discovery · doi:10.1039/d4dd00235k · Cited by 26
“[1, 2, 3] The subset of plastics made from polymerizing simple olefins/alkenes, POs have a general formula of (CH 2 CHR) n , where R is a simple alkyl group, see Fig.”
Billa, S., Vislavath, P., Bahadur, J., Rath, S. K., Ratna, D., Manoj, N. R., & Chakraborty, B. C. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c00225 · Cited by 27
Nagengast, N. D., Bay, C., Döpper, F., Schmidt, H., & Neuber, C. (2023) · Polymers · doi:10.3390/polym15102291 · Cited by 26
“Through economic and technological practicability [20], thermomechanical recycling is considered the most common approach for polymer recycling [21,22].”
BackgroundSynthesis of biobased polyacetals: a review
Renner, A. C., Thorat, S. S., & Sibi, M. P. (2024) · RSC Sustainability · doi:10.1039/d4su00488d · Cited by 25
Plastics detection and sorting using hyperspectral sensing and machine learning algorithms
Moroni, M., Balsi, M., & Bouchelaghem, S. (2025) · Waste Management · doi:10.1016/j.wasman.2025.114854 · Cited by 25
Advances and Challenges in Low‐Temperature Upcycling of Waste Polyolefins via Tandem Catalysis
Zhang, W., Kim, S., Sarazen, M. L., He, M., Chen, J. G., & Lercher, J. A. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202500559 · Cited by 26
Addressing the toxic chemicals problem in plastics recycling
Almroth, B. C., Carmona, E., Chukwuone, N., Dey, T., Slunge, D., Backhaus, T., & Karlsson, T. (2025) · Cambridge Prisms Plastics · doi:10.1017/plc.2025.1 · Cited by 23
“…and chemicals) and polymer degradation (e.g., degradation of polymer backbones; Ragaert et al., 2017), lack of economic incentives (Larrain et al., 2021), chemical contamination (Carmona et al., 2023), spread of microplastics (Stapleton et al., 2023) and energy inefficiency (Vogt et al., 2021).”
Advancements in polypropylene biodegradation: A comprehensive microbial and analytical review
Sutkar, P. R., & Dhulap, V. P. (2025) · Sustainable Chemistry for the Environment · doi:10.1016/j.scenv.2025.100213 · Cited by 29
Quantification of recycled content in plastics: a review
Soomro, S. S., Hong, C., & Shaver, M. P. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108426 · Cited by 30
Gaduan, A. N., Singkronart, K., Bell, C., Tierney, E., Burgstaller, C., & Lee, K. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c01850 · Cited by 23
Superacid-Assisted Degradation of Polystyrene
Thigale, A., Trant, C., Ahn, J., Nelson, M., Ryu, C. Y., Bae, C., & Lee, S. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00602 · Cited by 23
In‐mold rheology and automated process control for injection molding of recycled polypropylene
Krantz, J., Nieduzak, Z., Licata, J., O'Meara, S., Gao, P., & Masato, D. (2024) · Polymer Engineering and Science · doi:10.1002/pen.26836 · Cited by 23
A Review of the Life Cycle Analysis for Plastic Waste Pyrolysis
Arielle, D. T. L., Wafula, N. G., & Gilbert, Y. (2024) · Open Journal of Polymer Chemistry · doi:10.4236/ojpchem.2024.143006 · Cited by 22
“…difference is created between post-industrial and post-consumer application, mechanical recycling typically involves the primary choice; nevertheless, owing to certain fundamental restrictions, recyclable chemicals provide the sole practicable recycling alternative in numerous cases [5] [14] [15].”
Innovations in Food Packaging for a Sustainable and Circular Economy
Cruz, R. M. S., Albertos, I., Romero, J., Agriopoulou, S., & Varzakas, T. H. (2023) · Advances in food and nutrition research · doi:10.1016/bs.afnr.2023.10.003 · Cited by 26
Chemical simplification and tracking in plastics
Almroth, B. C., Dey, T., Karlsson, T., & Wang, M. (2023) · Science · doi:10.1126/science.adk9846 · Cited by 22
Santomasi, G., Aquilino, R., Brouwer, M. T., Gisi, S. D., Smeding, I. W., Todaro, F., Notarnicola, M., & van Velzen, E. U. T. (2024) · Waste Management · doi:10.1016/j.wasman.2024.06.016 · Cited by 22
Nason, A. K., Jerozal, R. T., Milner, P. J., & Suntivich, J. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c05496 · Cited by 21
Li, Z., Lin, G., Wang, H., Zhao, Y., & Chen, T. (2022) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2022.106412 · Cited by 21
dos Santos, A. C. V. D., Tranchida, D., Lendl, B., & Ramer, G. (2022) · The Analyst · doi:10.1039/d2an00823h · Cited by 27
Pfeffer, D., Reike, D., & Bening, C. R. (2025) · Environmental Innovation and Societal Transitions · doi:10.1016/j.eist.2025.100982 · Cited by 23
Techno-Economic Assessment of a Closed-Loop Circular Economy for Polylactic Acid
Zhang, R., Jia, S., Li, J., Xu, Y. D., Chen, H., & Zhang, X. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c01154 · Cited by 22
Recycling of polyethylene: Tribology assessment
Raghuram, H., Roitner, J., Jones, M. P., & Archodoulaki, V. (2023) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2023.106925 · Cited by 20
Carbamate-bond breaking on bulk oxides realizes highly efficient polyurethane depolymerization
Wu, X., Turnell‐Ritson, R. C., Han, P., Schmidt, J.-C., Piveteau, L., Yan, N., & Dyson, P. J. (2025) · Nature Communications · doi:10.1038/s41467-025-59688-0 · Cited by 19
“Although the sponge is also a fl exible PU foam, it contains additives, such as surfactants, colorants and softening agents 49,50 , which have the potential to hinder the reaction or poison the catalyst 51 .”
Dual Material Fused Filament Fabrication via Core–Shell Die Design
Naqi, A., Swain, Z. R., & Mackay, M. E. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c02152 · Cited by 20
Antioxidant-Containing Polymeric Additives for Improved Mechanical Recycling of PET
Wang, Y., Shaver, M. P., & Hoe, G. X. D. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01311 · Cited by 21
Ionic Liquid‐Assisted Depolymerization of Condensation Polymers: A Review
Chaudhary, A., & Srivastava, R. (2023) · ChemistrySelect · doi:10.1002/slct.202301709 · Cited by 20
Zhang, L., Peng, L., Liang, S., Xie, X., Lyu, S., & Wang, S. (2023) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2023.107872 · Cited by 18
Peng, X., Shin, Y., Zervoudakis, A. J., Nomura, K., Lindenmeyer, K. M., Miller, K. M., & Ellison, C. J. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230404 · Cited by 18
Ahamed, A., Huang, P., Young, J., Gallego‐Schmid, A., Price, R. M., & Shaver, M. P. (2023) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2023.107341 · Cited by 21
Kim, H. J., Bae, J. H., & Eom, Y. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122745 · Cited by 18
Water boosts reactive toughening of PET
Ronkay, F., Molnár, B., Szabó, E., Marosi, G., & Bocz, K. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.110052 · Cited by 18
Gnoffo, C., Arrigo, R., & Frache, A. (2025) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2025.111290 · Cited by 18
Adhesion to Untreated Polyethylene and Polypropylene by Needle-like Polyolefin Crystals
Shiraki, Y., SAITO, M., Yamada, N. L., Ito, K., & Yokoyama, H. (2023) · Macromolecules · doi:10.1021/acs.macromol.2c02503 · Cited by 17
Mulchandani, N., & Narayan, R. (2023) · Molecules · doi:10.3390/molecules28093832 · Cited by 18
“The recycling streams of plastics are often mixed or contaminated [14], necessitating excessive sorting and cleaning and thus making their separation difficult [15].”
BackgroundJudl, J., Horn, S., & Karppinen, T. (2023) · Circular Economy and Sustainability · doi:10.1007/s43615-023-00306-w · Cited by 17
“Additives, fillers, and other components in plastics, however, cause heterogeneity in the waste stream which negatively affects mechanical recycling [19].”
The U.S. plastics recycling economy : current state, challenges, and opportunities
Thomas, D. S., Kneifel, J. D., & Butry, D. T. (2024) · doi:10.6028/nist.ams.100-64 · Cited by 21
Yan, T., Granger, C., Sánchez‐Rivera, K. L., Zhou, P., Grey, S., Nelson, K., Long, F., Bar‐Ziv, E., Lehn, R. C. V., Avraamidou, S., et al. (2025) · Science Advances · doi:10.1126/sciadv.adt5841 · Cited by 16
Alreshidi, M. A., Yadav, K. K., Gacem, A., Padmanabhan, S., Ganesan, S., Guganathan, L., Saravanan, P., Thajudeen, K. Y., Fallatah, A. M., Ahmed, M. M., et al. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.107042 · Cited by 20
The role of biodegradable plastics in the global plastic future
Piao, Z., & Yao, Y. (2026) · Nature Reviews Clean Technology · doi:10.1038/s44359-025-00142-1 · Cited by 20
Góra, M., Tranchida, D., Albrecht, A., Müller, A. J., & Cavallo, D. (2024) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108351 · Cited by 18
Dong, L., Zhi, W., Li, J., & Li, W. (2024) · ACS Sustainable Resource Management · doi:10.1021/acssusresmgt.3c00137 · Cited by 16
Gorbea, G. D., Shen, L., Flanigan, K., Ellison, C. J., & Bates, F. S. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c02270 · Cited by 17
Strategies for recycling multi-material polymer blends for additive manufacturing
Gonzalez, C. S., Basdeo, A., Sanchez, F. A. C., Nouvel, C., Pearce, J. M., & Boudaoud, H. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01430 · Cited by 25
Hoang, C. N., Nguyen, N. T. T., Ta, S. T., Nguyen, N. N., & Hoang, D. (2022) · ACS Omega · doi:10.1021/acsomega.2c06642 · Cited by 15
Guidotti, G., Soccio, M., Gazzano, M., Siracusa, V., & Lotti, N. (2023) · Molecules · doi:10.3390/molecules28104056 · Cited by 15
“costs are higher than those needed to produce virgin plastics [5,6].”
BackgroundGloger, D., Hübner, G., Albrecht, A., Sobczak, L., Arndt, J., Tranchida, D., Binder, W. H., & Gahleitner, M. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c01938 · Cited by 16
Upcycling of recycled polyethylene for rotomolding applications via dicumyl peroxide crosslinking
Ahmad, H., & Rodrigue, D. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.56236 · Cited by 15
Assessing the Role of Compostable Plastics in Circular Economy Transition
Hwang, D. K., Park, J., Oh, D. X., Jeon, H., & Koo, J. M. (2025) · ChemSusChem · doi:10.1002/cssc.202501938 · Cited by 14
C–H Insertion Functionalization of Polyolefins for Versatile Polyolefin-Polyester Compatibilization
Zhang, M., Kränzlein, M., Cui, S., LaPointe, A. M., & Coates, G. W. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.5c20245 · Cited by 14
Detailed waste flows and circularity rates reveal the limits of the circularity gap concept
Miatto, A., Schandl, H., Yamashita, N., & Fishman, T. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108319 · Cited by 15
Circular Upcycling of Bottlebrush Thermosets
Zhang, D., Vashahi, F., Dashtimoghadam, E., Hu, X., Wang, C. J., Garcia, J., Bystrova, A. V., Vatankhah‐Varnosfaderani, M., Leibfarth, F. A., & Sheiko, S. S. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202217941 · Cited by 15
Exploiting retro oxa-Michael chemistry in polymers
Ratzenböck, K., Uher, J. M., Fischer, S. M., Edinger, D., Schallert, V., Žagar, E., Pahovnik, D., & Slugovc, C. (2023) · Polymer Chemistry · doi:10.1039/d2py01345b · Cited by 14
Fastow, E. J., Chethalen, R. J., Coughlin, E. B., & Winey, K. I. (2023) · Giant · doi:10.1016/j.giant.2023.100231 · Cited by 15
Baltacı, N. G., Baltacı, M. Ö., Görmez, A., & Örtücü, S. (2024) · Environmental Science and Pollution Research · doi:10.1007/s11356-024-33309-7 · Cited by 14
“Although recycling applications are seen as an effective solution, the process is tremendously slow, and the necessity of separating and then recycling plastics with different structures poses a problem for this application (Vogt et al. 2021).”
BackgroundGholizadeh, M. R., Roghani‐Mamaqani, H., & Haddadi‐Asl, V. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.101174 · Cited by 16
Automated sorting technology for plastic waste
Lubongo, C., Daej, M. A. A. B., & Alexandridis, P. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13798-3.00017-6 · Cited by 16
Zhou, J., Liu, C., Ren, J., & He, C. (2024) · Energy · doi:10.1016/j.energy.2024.133272 · Cited by 13
Polyolefin‐based Multiblock Copolymers from Cascade ROMP‐RAFT Polymerization
Chen, M., Si, G., Zhang, W., & Chen, C. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202507257 · Cited by 13
An Overview of Circular Economy Approaches for Plastics
Tang, K. H. D. (2025) · Recent Progress in Materials · doi:10.21926/rpm.2503011 · Cited by 31
Foltýn, T., Všetečka, J., Svoboda, R., Podzimek, Š., Vinklárek, J., & Honzíček, J. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01600 · Cited by 13
Two-step conversion of polyethylene into recombinant proteins using a microbial platform
Connor, A. J., Lamb, J. V., Delferro, M., Koffas, M. A. G., & Zha, R. H. (2023) · Microbial Cell Factories · doi:10.1186/s12934-023-02220-0 · Cited by 14
“However, industrial-scale tertiary recycling has been limited to date due to engineering and economic challenges [13].”
BackgroundNabels-Sneiders, M., Barkāne, A., Platnieks, O., Orlova, L., & Gaidukovs, S. (2023) · Foods · doi:10.3390/foods12224136 · Cited by 13
“The challenges of disposing and recycling such materials are substantial, posing a severe obstacle within the framework of sustainable development [6,7].”
BackgroundPlastics Pollution and the Planetary Boundaries frameworkPreprint
Villarrubia-Gómez, P., Cornell, S., Almroth, B. C., Ryberg, M. W., & Eriksen, M. (2022) · EarthArXiv (California Digital Library) · doi:10.31223/x5p05h · Cited by 16
Quantification of Polymer Surface Degradation Using Fluorescence Spectroscopy
Tigner, J., Elmer-Dixon, M. M., & Maurer‐Jones, M. A. (2023) · Analytical Chemistry · doi:10.1021/acs.analchem.3c01151 · Cited by 12
Functionalization and Repurposing of Polypropylene to a Thermoset Polyurethane
Monegro, R. H., Krishnamoorti, R., & Robertson, M. L. (2024) · ACS Macro Letters · doi:10.1021/acsmacrolett.4c00505 · Cited by 12
Decoding the barriers for a circular plastics industry: An equation framework
Grafström, J. (2025) · Sustainable Production and Consumption · doi:10.1016/j.spc.2025.01.010 · Cited by 14
Comparison of Computational Methods for Simulating Depolymerization Reaction
Mieda, S. (2025) · ACS Omega · doi:10.1021/acsomega.4c09953 · Cited by 14
“16,17 Therefore, we propose that a system capable of simulating the depolymerization reaction and automatically clarifying its polymer-to-monomer-formation reaction mechanism is needed.”
Can mixed plastics be recycled and upcycled without separation?
Pang, J. J. M., Lee, Y. H., Zhao, H., Ong, A., & Lim, J. Y. C. (2025) · Green Chemistry · doi:10.1039/d5gc03714j · Cited by 12
Barati, A., Wang, P., Liu, S., & Dashtimoghadam, E. (2023) · ACS Omega · doi:10.1021/acsomega.2c08027 · Cited by 12
The Contribution of Commercial Metal Amides to the Chemical Recycling of Waste Polyesters
Santulli, F., Lamberti, M., Annunziata, A., Lastra, R. C., & Mazzeo, M. (2022) · Catalysts · doi:10.3390/catal12101193 · Cited by 12
Venkatachalam, V., Spierling, S., & Endres, H. (2024) · Frontiers in Environmental Science · doi:10.3389/fenvs.2024.1316530 · Cited by 11
Maines, E. M., Zografos, A., Sample, C. S., Zervoudakis, A. J., Reineke, T. M., & Ellison, C. J. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01329 · Cited by 11
Valorization of harmful substances in the chemical recycling of polyvinyl chloride
Zhu, M., & Jiang, X. (2025) · Green Chemistry · doi:10.1039/d4gc05075d · Cited by 11
Research roadmap for sustainable polymeric materials in Korea
Kim, J. F., Kim, H. J., Park, J., Jeon, H., Kim, J. G., Choi, C., Nam, K., Shin, G., Park, S. H., Shin, J., et al. (2025) · Macromolecular Research · doi:10.1007/s13233-024-00357-4 · Cited by 11
“However, these new plastics differ from commodity plastics such as polyethylene, polypropylene, polystyrene, or polyesters, and many new materials struggle to penetrate current markets [55].”
Waszczyłko-Miłkowska, B., Bernat, K., & Szczepański, K. (2024) · Sustainability · doi:10.3390/su16146226 · Cited by 11
The plastic pandemic: Quantification of waste on an inpatient medicine unit
Mewaldt, C., Armand, W., Slutzman, J. E., & Eisen, J. (2023) · The Journal of Climate Change and Health · doi:10.1016/j.joclim.2023.100230 · Cited by 11
CO2 and HDPE Upcycling: A Plasma Catalysis Alternative
Gorky, F., Nambo, A., Kessler, T. J., Mack, J. H., & Carreon, M. L. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c02403 · Cited by 10
Performance analysis of municipal solid waste management using technical indicators
Singh, D. J., Dikshit, A. K., Dangi, M. B., Tchobanoglous, G., & Kumar, S. (2025) · Environmental and Sustainability Indicators · doi:10.1016/j.indic.2025.100693 · Cited by 15
Self-citationZhao, X., & You, F. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.142281 · Cited by 14
Reforming plastic packaging regulation: Outcomes from stakeholder interviews and regulatory analysis
Johnson, H. N., Keane, K., McGillivray, L., Akhtar‐Khavari, A., Chambers, L. C., Barner‐Kowollik, C., Lauchs, M., & Blinco, J. P. (2024) · Sustainable Production and Consumption · doi:10.1016/j.spc.2024.12.017 · Cited by 11
Manis, L. K., Ge, J., Kim, C. A., Ejiogu, E., Chen, Z., Yappert, R. D., & Peters, B. (2025) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5c00088 · Cited by 9
Teng, Y. Y., Zheng, Y., Wang, Z., Wang, Z., Hu, H., Zheng, H., Duan, J., Meng, Y., Zhou, Y., & Hall, P. (2025) · Frontiers in Marine Science · doi:10.3389/fmars.2025.1625561 · Cited by 10
Harnessing Colloidal Dispersion for Laccase‐Driven Enzymatic Depolymerization of Polystyrene
Pujol, M., Gonsales, S. A., Seksek, F., Berrin, J., Bissaro, B., & Taton, D. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202513937 · Cited by 9
A Sustainable Approach to Plastics; Bioplastics
ERKUL, Ş. N., Karahan, M., & Arı, A. (2023) · RECENT - REzultatele CErcetărilor Noastre Tehnice · doi:10.31926/recent.2023.69.029 · Cited by 8
Machine Vision for Solid Waste Detection
Pimenov, A., Nesteruk, S., Mazanov, G., Ilyushina, A. N., Stepanov, A., Mikhailova, N., & Somov, A. (2024) · Springer eBooks · doi:10.1007/978-3-031-59531-8_12 · Cited by 9
Gothár, E., & Schanz, H. (2022) · Sustainable Production and Consumption · doi:10.1016/j.spc.2022.03.019 · Cited by 9
Makarova, O. A., Ravi, B., Sobkowicz, M. J., Masato, D., & Olivetti, E. (2025) · Journal of Advanced Manufacturing and Processing · doi:10.1002/amp2.70014 · Cited by 9
Habeeb, T. H., & Farooq, U. (2025) · Catalysis Science & Technology · doi:10.1039/d5cy00477b · Cited by 8
Factors influencing consumer perceptions of recycled plastic products: A literature review
Sulaimani, S. H., Eves, B., Gashoot, M. M., Reynolds, T., & Thomas, B. (2025) · Cleaner and Responsible Consumption · doi:10.1016/j.clrc.2025.100318 · Cited by 8
Zhu, Y., Tang, J., Zhu, S., Liu, Y., Lou, L., & Mei, Q. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.168217 · Cited by 8
Bhattarai, L., Neupane, A., & Rasul, M. G. (2026) · Waste Management · doi:10.1016/j.wasman.2026.115542 · Cited by 9
Zhu, Y., Fink, W. H., Yost, S. F., Mather, P. T., & Vogt, B. D. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104209 · Cited by 7
Self-citationDisruptive technologies that deliver a circular economy for plastics
Locock, K. E. S., Terhorst, A., King, S., & Scroggie, K. R. (2025) · Next Sustainability · doi:10.1016/j.nxsust.2025.100098 · Cited by 11
Chah, C. N., Sreedeep, S., & Katiyar, V. (2025) · Transportation Geotechnics · doi:10.1016/j.trgeo.2025.101515 · Cited by 12
Ogbu, I. M., Fastow, E. J., Zhu, W., Wells, L. A., Chethalen, R. J., Nair, V., Hinton, Z. R., Balzer, A. H., Hu, W., Coughlin, E. B., et al. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c00771 · Cited by 8
Gnoffo, C., Arrigo, R., & Frache, A. (2024) · Journal of Composites Science · doi:10.3390/jcs8120527 · Cited by 8
Hosseiny, F. Z., & Shi, R. (2025) · Journal of Advanced Manufacturing and Processing · doi:10.1002/amp2.70016 · Cited by 7
Zhu, Y., Wei, C., Kong, L., Zhang, X., Li, T., Wang, Y., Huang, J., & Dong, W. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5c03426 · Cited by 7
Importance of hydrogen bonding in base-catalyzed transesterification reactions with vicinal diols
Kumar, P., Sumpter, B. G., Saito, T., & Davis, R. J. (2023) · Journal of Catalysis · doi:10.1016/j.jcat.2023.115246 · Cited by 7
Metadata
- Authors
- Vogt, B. D., Stokes, K. K., & Kumar, S. K.
- Affiliations
- Pennsylvania State University (US)
- Geisys Ventures, LLC, Lunenburg, Massachusetts 01462, United States
- Columbia University (US)
- Corresponding author
- Vogt, Bryan D.
- Venue
- ACS Applied Polymer Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-08-23
- Volume
- 3
- Issue
- 9
- Pages
- 4325-4346
- ISSN
- 2637-6105 (ISSN-L)
- OpenAlex
- W3193988466
- Cited by
- 385
- References
- 225
- Citations by year
- 2026: 84 · 2025: 105 · 2024: 87 · 2023: 66 · 2022: 38 · 2021: 5
- FWCI
- 17.37
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Polymer Materials (publishedVersion)
- Funders
- Pennsylvania State University
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Keywords
- plastic recycling, plastic waste management, plastic sorting, polymer additives, polyolefins, mechanical recycling, chemical recycling, value-added products, circular economy, ocean plastic, recycling economics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.