Why is Recycling of Postconsumer Plastics so Challenging?
The DOI matches its Crossref record; 228 of the 228 references it cites were found in a registry or an index.
Abstract
The ubiquitous use of plastics has been driven by their combination of low cost and properties, but these attributes directly challenge waste management schemes for plastic recycling. Some postconsumer recycling programs are now nearly 50 years old, but a significant fraction of plastics still finds landfills or other dumping strategies at their end of life. With the growing concern regarding plastic waste, especially ocean plastics, there is a need for innovation and alternative strategies for the economic translation of plastic waste to valued product(s) that will promote their efficient circular utilization. This review first describes the technical and economic hurdles associated with the recycling of postconsumer plastics, but then it focuses on providing an overview of emergent strategies to recover plastic waste through new polymer design, new recycling processes, and chemical transformations to value-added products. Specific challenges discussed include plastic waste sorting and separations, product variability including additives, and the high efficiency/low cost in which the existing petrochemical industry can produce virgin polymers, in particular polyolefins. Although a wide variety of technical strategies have been demonstrated for recycling of plastics through both mechanical and chemical means, the commercial success of these different strategies is generally limited by either performance, including large variance in key metrics, or economics where the products can match the performance of virgin materials but the recycling process is expensive. Successful capture of postconsumer plastic waste through recycling likely will depend on economic incentives and government regulations.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Mechanical recycling of plastics is largely unsuccessful for preserving their value or as a waste remediation strategy-only around 9% of all plastics have been recycled”
From Chemically recyclable polyolefin-like multiblock polymers (2023) · cites this paper as [5]
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Accumulation and fragmentation of plastic debris in global environments
Barnes, D. K. A., Galgani, F., Thompson, R. C., & Barlaz, M. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0205 · Cited by 6,126
Hahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873
Predicted growth in plastic waste exceeds efforts to mitigate plastic pollution
Borrelle, S. B., Ringma, J., Law, K. L., Monnahan, C. C., Lebreton, L., McGivern, A., Murphy, E., Jambeck, J., Leonard, G. H., Hilleary, M. A., et al. (2020) · Science · doi:10.1126/science.aba3656 · Cited by 3,219
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
The global threat from plastic pollution
MacLeod, M., Arp, H. P. H., Tekman, M. B., & Jahnke, A. (2021) · Science · doi:10.1126/science.abg5433 · Cited by 2,951
Transport and release of chemicals from plastics to the environment and to wildlife
Teuten, E. L., Saquing, J. M., Knappe, D. R. U., Barlaz, M. A., Jonsson, S., Björn, A., Rowland, S. J., Thompson, R. C., Galloway, T. S., Yamashita, R., et al. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0284 · Cited by 2,938
Alimi, O. S., Farner Budarz, J., Hernandez, L. M., & Tufenkji, N. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b05559 · Cited by 2,668
Applications and societal benefits of plastics
Andrady, A. L., & Neal, M. A. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0304 · Cited by 2,464
An engineered PET depolymerase to break down and recycle plastic bottles
Tournier, V., Topham, C. M., Gilles, A., David, B., Folgoas, C., Moya-Leclair, E., Kamionka, E., Desrousseaux, M.-L., Texier, H., Gavalda, S., et al. (2020) · Nature · doi:10.1038/s41586-020-2149-4 · Cited by 2,176
Research works printed but not linked: 9
- Fullerton D., 1996, Am. Econ. Rev., 86, 971
- 10.1002/(sici)1521-4125(199912)22:12<997::aid-ceat997>3.0.co;2-y · doi:10.1002/(sici)1521-4125(199912)22:12<997::aid-ceat997>3.0.co;2-y
- 2021, PCT 10-Q filing for PureCycle
- OnColor IR Sortable Black Infraread Sortable Black for Recyclable Packaging ; https://www.avient.com/sites/default/files/2020-08/detectable-blacks-product-bulletin.pdf (accessed April 10, 2021).
- 10.1002/(sici)1099-0518(20000615)38:12<2137::aid-pola20>3.0.co;2-d · doi:10.1002/(sici)1099-0518(20000615)38:12<2137::aid-pola20>3.0.co;2-d
- 2019, BP’s New Technology to Enable Circularity for Unrecyclable PET Plastic Waste
- 2021, Eastman and Governor Lee Announce World-Scale Plastic-to-Plastic Molecular Recycling Facility to be Built in Kingsport
- 2020, Carbios Produces First Clear Plastic Bottles from Enzymatically Recycled Textile Waste
- 10.1002/(sici)1521-4125(199810)21:10<777::aid-ceat777>3.0.co;2-l · doi:10.1002/(sici)1521-4125(199810)21:10<777::aid-ceat777>3.0.co;2-l
Cited by
Items 301–400 of 402
Materials Design Trends Fostering Environmental Sustainability
Poblete, S. S. D., Anselmi, L., & Rognoli, V. (2026) · Springer eBooks · doi:10.1007/978-3-032-08163-6_21 · Cited by 1
Muhandiram, A., Rathnayaka, S., Somasiri, M., Basnayaka, C., Yapa, N., & Fernando, E. Y. (2026) · Biodegradation · doi:10.1007/s10532-026-10267-0 · Cited by 1
“Due to their inconsistent molecular patterns, this blending makes it harder to distinguish materials efficiently, which results in inefficient recycling processes (Vogt et al. 2021).”
Abdelghani, B. A., Ali, U., Bar‐Ziv, E., & Long, F. (2026) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2026.108862 · Cited by 1
Abbasi, G., Hernández, M. L. H., Hauser, M., Bourgé, É., Harju, M., & Nikiforov, V. A. (2026) · Environment International · doi:10.1016/j.envint.2026.110177 · Cited by 1
Pyrolysis mechanism of engineering plastic waste under carbon dioxide
Kwon, D., Kim, Y., Kim, J. Y., Lee, D., Lee, J., & Kwon, E. E. (2026) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2026.107733 · Cited by 1
Accurate quantification of polyester in textiles through complete depolymerisation and HPLC
Cerri, M., Pitkänen, L., Schutgens, C., & Hummel, M. (2026) · Analytical Methods · doi:10.1039/d6ay00086j · Cited by 1
Galan, N. J., Baez, B., Rahman, M. A., Foster, J. C., & Saito, T. (2026) · Advanced Materials Technologies · doi:10.1002/admt.202502645 · Cited by 1
Recycling of Scrap Metal from Multifunctional Aluminum-Based Electronic Device Housings
Szymański, W., Boczkal, S., Kapinos, D., Hrabia-Wiśnios, J., Szymańska, E., Stobbe, L., Mager, T., & Kościelski, M. (2026) · Recycling · doi:10.3390/recycling11050088 · Cited by 1
“The development of recycling is hampered by numerous barriers, including complex and difficult-to-process packaging designs, low-quality waste, scattered plastic streams, low acceptance of re-cycled materials, and low oil prices, which make virgin plastic cheaper than recycled alternatives [12,13].”
Dunn, C. B., Zhang, Y., Wei, P., Ahn, J. B., Zhang, W., & Qiang, Z. (2026) · JACS Au · doi:10.1021/jacsau.6c00677 · Cited by 2
Ng, K. H., Süss, L. D., Hirschel, F., Müller, M., Schell, B. R., Metzsch‐Zilligen, E., Pfaendner, R., & Bruns, N. (2026) · RSC Sustainability · doi:10.1039/d6su00069j · Cited by 1
Standish, R., Yin, J., Burger, J., Jackson, G., Adjiman, C. S., Minceva, M., & Galindo, A. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00489 · Cited by 1
Kudo, M., Ishikawa, M., Horiguchi, H., Goto, S., & Saito, H. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.71218 · Cited by 1
Koumpakis, D.-A., Michailidou, A. V., & Vlachokostas, C. (2026) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2026.102278 · Cited by 1
Switchable hydrophilicity solvents (SHS) in resource extraction and utilization
Solanki, S., Tsianou, M., & Alexandridis, P. (2026) · Separation and Purification Technology · doi:10.1016/j.seppur.2026.140100 · Cited by 1
Challenges in Polymer Recycling
Mohammadi, M., Younes, G. R., Yousefzade, O., & Ajji, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00048-x · Cited by 1
Neumann, N., Mangold, A., Schneider, J., & Wölfel, C. (2024) · Circular Economy and Sustainability · doi:10.1007/s43615-024-00487-y · Cited by 2
“For instance, recycled plastic is still around 20–30% more expensive in comparison to new plastic [28–30].”
Evaluation of Cement- and Water-Free Concrete Using Waste Plastic Binder (Plasticrete)
Tayebani, B., Memari, A. M., & Said, A. M. (2025) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-18970 · Cited by 1
Panthi, S., & Zhang, F. (2025) · CIB Conferences · doi:10.7771/3067-4883.2081 · Cited by 1
Five Years of ACS Applied Polymer Materials
Lutkenhaus, J. L. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c03139 · Cited by 1
Selective C(sp3)-C(sp3) reduction and metathesis of ketonesPreprint
Wang, S., Wang, Y., Yang, Y., Hu, K., Lou, D., Wang, K., Maron, L., & Zhou, X. (2022) · Research Square · doi:10.21203/rs.3.rs-1373287/v1
WILL WE BE ABLE TO USE RECYCLED PLASTICS OR SHALL WE DECIDE FOR PACKAGING FREE PRODUKCTION?
MILICHOVSKÝ, F., & MAJEROVÁ, A. (2022) · AD ALTA Journal of Interdisciplinary Research · doi:10.33543/1202276283
Waste Plastics Chemical Recycling in the Context of Refining and Petrochemical Industries
Hussein, T., & Maxa, D. (2023) · Paliva · doi:10.35933/paliva.2023.04.01
“Subsequently, such analytical results of pyrolysis products can be used to appropriately address the contamination in treatment path design of the pyrolysis products [50].”
BackgroundRecent Advances in Cellulosic Porous Materials
Aghvami‐Panah, M., & Ameli, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00078-8
3 Nachhaltige Gestaltung von Produkten
Reichert, D., Heinrich, V., & Fröhling, M. (2024) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.1007/978-3-446-48179-4_3
Recommendation: Addressing the toxic chemicals problem in plastics recycling — R2/PR14
(2025) · Cambridge Prisms Plastics · doi:10.1017/plc.2025.1.pr14
Recommendation: Addressing the toxic chemicals problem in plastics recycling — R1/PR9
(2024) · Cambridge Prisms Plastics · doi:10.1017/plc.2025.1.pr9
Author comment: Addressing the toxic chemicals problem in plastics recycling — R1/PR6
Almroth, B. C. (2024) · Cambridge Prisms Plastics · doi:10.1017/plc.2025.1.pr6
Review: Addressing the toxic chemicals problem in plastics recycling — R0/PR2
(2024) · Cambridge Prisms Plastics · doi:10.1017/plc.2025.1.pr2
Decision: Addressing the toxic chemicals problem in plastics recycling — R1/PR10
(2024) · Cambridge Prisms Plastics · doi:10.1017/plc.2025.1.pr10
Recommendation: Addressing the toxic chemicals problem in plastics recycling — R0/PR4
(2024) · Cambridge Prisms Plastics · doi:10.1017/plc.2025.1.pr4
Modeling and numerical simulation of a friction-compression process for recycling thermoplastics
Meksassi, S. (2025) · Materials research proceedings · doi:10.21741/9781644903599-247
Jayasena, S., Perera, M., Wijayarathna, D., Seneviratne, G., Wijesundera, S., & Chinthaka, S. D. M. (2025) · Springer eBooks · doi:10.1007/978-981-96-2343-3_14
Polyolefin‐based Multiblock Copolymers from Cascade ROMP‐RAFT Polymerization
Chen, M., Si, G., Zhang, W., & Chen, C. (2025) · Angewandte Chemie · doi:10.1002/ange.202507257 · Cited by 1
Abdulsattr, S. M., Sayyid, F. F., & Al-Rubaiey, S. I. J. (2025) · AIP conference proceedings · doi:10.1063/5.0286891
Jones, M. D., Barker, C. W., Motolani, F., Patter, R., Kilbey, S. M., Chandler, B. D., Long, B. K., & Vogt, B. D. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c02105
Self-citationComparative Life Cycle Assessments of Circular Plastics (LCA)
Hermanns, R., Meys, R., & Renner, M. (2025) · Springer eBooks · doi:10.1007/978-3-031-78829-1_17
Raw Materials—Recycler, Chemical Industry, and Plastic Manufacturer
Snell, H., Pfaendner, R., Carus, M., Krause, L., Orth, P., & Liman, U. (2025) · Springer eBooks · doi:10.1007/978-3-031-78829-1_10
Yoo, M. G., Lee, Y., Bakhshi, P., & Taff, S. D. (2025) · Cadernos Brasileiros de Terapia Ocupacional · doi:10.1590/2526-8910.ctoao399738842
Garcia, G. A., & Castro, J. L. G. (2025) · Revista de Gestão Social e Ambiental · doi:10.24857/rgsa.v19n10-070
Challenges and Prospects of Conversion of Municipal Solid Waste to Biofuel and Chemicals
Sharma, S., Dedha, A., Kumari, A., Gupta, P., & Gupta, M. M. (2025) · Springer eBooks · doi:10.1007/978-981-96-8594-3_9 · Cited by 1
Huang, Y., Gao, Y., Zhao, Y., & Tang, Y. J. (2025) · Scientia Sinica Chimica · doi:10.1360/ssc-2025-0283
BOTTLEBRUSH HYDROGELS WITH TISSUE-MIMETIC MECHANICAL AND SWELLING PROPERTIES
Vashahi, F. (2023) · Carolina Digital Repository (University of North Carolina at Chapel Hill) · doi:10.17615/f0w4-9z95
Buchner, V. (2024) · reposiTUm (TU Wien) · doi:10.34726/hss.2024.120586
Material recycling of post-consumer flexible polyethylene packaging waste
Noyan, E. C. B., Venkatesh, A., & Boldizar, A. (2022) · Chalmers Research (Chalmers University of Technology)
Mechanical recycling of post-consumer polyethylene packaging waste
Noyan, E. C. B. (2024) · Chalmers Research (Chalmers University of Technology)
Bissaro, B., & Seksek, F. (2025) · The Conversation · doi:10.64628/aak.equtvjd73
Zhang, W., Huang, Y., Fan, J., Shen, G., & Chen, H. (2025) · Journal of Environmental Sciences · doi:10.1016/j.jes.2025.12.030
Aqueous chemi-mechanical recycling for blending, decolorizing, and purifying mixed polyolefins
Reed, M. R., Pathan, A. N., Banerjee, A., Timko, M. T., & Eagan, J. M. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.173097
Dong, L., & Bai, S. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c04215
Corrêa, R. M. D. A., da Silva, T. F., dos Anjos, E. G. R., da Silva, T. F., Marini, J., & Passador, F. R. (2026) · ACS Sustainable Resource Management · doi:10.1021/acssusresmgt.5c00629
Wang, B., Zhao, H., Yan, J., Han, L., Shi, L., HaiTao, L. I. U., Hu, T., Tian, F., & Wang, X. (2026) · Catalysis Science & Technology · doi:10.1039/d6cy00181e
Reducing Diversity in Lightweight Packaging – Implications for Current Recycling Practice
Bichler, L. P. (2026) · reposiTUm (TU Wien) · doi:10.34726/hss.2026.111337
Nowicka, W., Szot, W., Różański, A., Yang, L., Gautam, P. S., Chinta, S., Verghese, N. E., Duchateau, R., & Jasińska-Walc, L. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00488
Raghavan, A., Mohanty, S., & Nayak, S. K. (2026) · Materials Circular Economy · doi:10.1007/s42824-026-00223-x
Rasilainen, I., Lahtela, V., & Kärki, T. (2026) · Journal of Composite Materials · doi:10.1177/00219983261440694
Prediction of Pyrolysis Oil Yield from Plastic Waste using Artificial Neural Network (ANN)
Orhorhoro, E. K., Erameh, A. A., & Emifoniye, E. U. (2026) · African Journal of Environmental Sciences and Renewable Energy · doi:10.62154/ajesre.2026.022.01012
Abdelghani, B. A., Bar-Ziv, S., Bar‐Ziv, E., & Long, F. (2026) · REMADE Circular Economy Technology Summit & Conference · doi:10.65569/lmbd6346
Dissolution-Precipitation Recycling of Polyolefins
Tsianou, M., Alexandridis, P., Ghasemi, A., & Solanki, S. (2026) · REMADE Circular Economy Technology Summit & Conference · doi:10.65569/jyor4299
Wagner, Z., Long, F., Bar‐Ziv, E., Huber, G. W., & Granger, C. (2026) · REMADE Circular Economy Technology Summit & Conference · doi:10.65569/gceh6828
Maio, L. D., & Incarnato, L. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-34158-8.00123-7
Life cycle evaluation of energy production from waste conversion processes
Nabavi‐Pelesaraei, A., Hamidinasab, B., & Gagnon, Y. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-27614-9.00005-6
Modular Molecular Editing for Polymer‐to‐Polymer Recycling of Postconsumer Plastics
Xie, H., Xiao, G. B., Liu, L., Zhang, H., & Zhang, J. V. (2026) · ChemPlusChem · doi:10.1002/cplu.70159
Sustainable Textile Waste Valorization as New Raw Materials for Knitwear Design
Ferreira, S., Pereira, M. E., Barata, T. R., Belino, N., Santiago, A., Fernandes, M. B., & Miguel, R. A. L. (2026) · Springer proceedings in earth and environmental sciences · doi:10.1007/978-3-032-14960-2_69
Inactivation of PETase at Interfaces Inhibits PET Plastic Depolymerization
Robinson, A., Lippincott, H., MacFarlane, C. E., Kelaita, D. J., Moul, C., Pines, G., Schwartz, D. K., Kaar, J. L., Boock, J. T., & Berberich, J. A. (2026) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c13215
Lahfaidh, F.-E. N., Guigo, N., Vincent, L., & Sbirrazzuoli, N. (2026) · Polymer Testing · doi:10.1016/j.polymertesting.2026.109406
Estrada‐Monje, A., Romero, S. A., Zaragoza-Estrada, A., Kantun-Uicab, M. C., Piñón-Balderrama, C. I., Hernández‐Escobar, C. A., & Zaragoza‐Contreras, E. A. (2026) · Recycling · doi:10.3390/recycling11050090
Terephthalate, a plastic monomer, triggers phosphate metabolism rewiring in yeast
Takallou, S., Lancaster, R., Kinshin, S., Kazmirchuk, T. D. D., Golshani, A., & Fletcher, E. (2026) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2537088123
Sustainable additive manufacturing: A review on 3D printing using recycled waste polymers
Punia, U., Sihmar, P., Chahar, M., Garg, R. K., Tyagi, A., & Soni, H. (2026) · Innovation and Emerging Technologies · doi:10.1142/s2737599426400074
Catalytic valorization of polyolefins: from catalysts and processes to reactors
Wu, C., Guo, C., Xu, X., Liu, K., Bai, L., Yang, N., Fu, D., & Gong, J. (2026) · Chemical Society Reviews · doi:10.1039/d5cs01390a · Cited by 2
NSHOL, S. C., Umar, S., & Yero, S. A. (2025) · FUDMA Journal of Engineering and Technology · doi:10.33003/4zkynn53
“However, landfill spaces are reducing, the incineration process emits hazardous gases and recycling plastic to meet the same performance as virgin materials is expensive [3].”
Maione, C., Lapko, Y., & Trucco, P. (2026) · Discover Sustainability · doi:10.1007/s43621-026-03988-y
“” Studies have researched the advantages and limitations of both technological solutions [4, 18, 19]; however, these studies hardly examine the implications for successfully integrating both MR and CR in plastic’s end-of-life management.”
Doss, B. L., Alinejad, M., House, K. L., Xu, S., Brinzari, T. V., Pan, L., & Wang, J. (2026) · Microscopy and Microanalysis · doi:10.1093/mam/ozag048
Barriers and Policy Gaps in U.S. Film Plastics Recycling: A Scoping Review Toward Reform
Djokoto, N. K., & Njende, I. N. (2026) · Magna Scientia Advanced Research and Reviews · doi:10.30574/msarr.2026.17.2.0134
Kim, S., Xu, D., Korolovych, V. F., Flores-Hernandez, D. R., Moriam, K., Braconnier, D. J., & Boriskina, S. V. (2026) · ACS Materials Letters · doi:10.1021/acsmaterialslett.6c00337
“The crystallinity has been calculated as the ratio of the sum of the areas under deconvoluted crystalline (110), (200), (210) peaks and the total area, which includes both the crystalline peaks and the amorphous halo 7 .”
InfluentialGrömmer, R., & Höhne, C. (2026) · Polymer Testing · doi:10.1016/j.polymertesting.2026.109309
Confined Isomerization Enables Solar-Thermal Upcycling of Polyolefins into High-Octane Gasoline
Feng, C., Hu, M., Zuo, S., Li, B., Ren, Y., Wu, Z., Alharbi, J., Luo, J., Li, W., Hadjichristidis, N., et al. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.6c07894
Breslmayer, G., Gritsch, L., & Lederer, J. (2026) · Global Challenges · doi:10.1002/gch2.70144
Moigne, L. L., Sircoglou, M., Bonnin, Q., Penouilh, M., Vignolle, J., Grau, É., Coz, C. L., Bousquet, M., Fleurat‐Lessard, P., & Normand, A. T. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.4183926
Moigne, L. L., Sircoglou, M., Bonnin, Q., Penouilh, M., Vignolle, J., Grau, É., Coz, C. L., Bousquet, M., Fleurat‐Lessard, P., & Normand, A. T. (2026) · Angewandte Chemie · doi:10.1002/ange.4183926
Adhesion to untreated polypropylene by enhancing interfacial polymer chain entanglement
Shiraki, Y., Seki, T., & Wakioka, M. (2026) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2026.104464
Recyclable Polyolefin‐Like Polymers With Backbone Disulfide and O‐Thiocarbamate Linkages
Zhao, Y., Xiao-ning, Q., Peng, S.-R., Tokhirjon, J., Xia, L., Hong, C., You, Y., & Zhang, Z. (2026) · Journal of Polymer Science · doi:10.1002/pola.70315
Kassem, H. S., Mosa, A., Bhattacharya, M., AbouElnaga, M., Elagamy, M., Atiya, D., Elgamal, B., & Osbahr, H. (2026) · Sustainable Development · doi:10.1002/sd.71608
Saunders, D. H. (2023) · DalSpace (Dalhousie University) · Cited by 1
Ma, K., & Xu, T. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00833
Dynamic Covalent Crosslinking Delays Phase Separation in Networks of Incompatible Polymers
Chen, Y.-J., Tsao, Y.-H., Sengul, B. S., Lin, M.-H., Leal, C., Evans, C. M., & Sing, C. E. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00726
Metelková, S. (2026) · DSpace VŠB-TUO (VŠB-TUO)
Text-driven causal mapping of PET/rPET circularity in Australia: A dynamic factor–network analysis
Han, J., Du, L., Zuo, J., Zillante, G., Chang, R., Sheng, Y., & Carbone, A. (2026) · Environmental Impact Assessment Review · doi:10.1016/j.eiar.2026.108708
Steven, V., Hossein, G., Schiraldi, D. A., & Joao, M. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70504
Chen, R., Cheng, L., Zhang, W., Li, J., Gu, J., Yuan, H., & Chen, Y. (2026) · Green Energy & Environment · doi:10.1016/j.gee.2026.08.009
Assessment of CO₂ Emissions from Solid Waste at Kebon Kongok Landfill Using Warm Analysis
Febrianti, I., Kasmuri, N., & Nayono, S. E. (2026) · Malaysian Journal of Science · doi:10.22452/mjs.vol45sp1.4
Walking with plastic waste: resonant practices for working with presence-as-absence
Aular, N. O. (2026) · Nordia Geographical Publications · doi:10.30671/nordia.175969
Decoupling Mechanical Performance and Macrophase Morphology in Compatibilized Polymer Blends
Laeini, M. S., Motolani, F., Goel, S., Dementyev, M., Hickey, R. J., & Vogt, B. D. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00478
Self-citationChallenges and opportunities in scaling up polymer recycling infrastructure
Samanta, K., Dey, I., & Bose, S. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-27739-9.00020-7
Wang, B., Wang, Y., Zhang, Z., Cui, D., & Li, S. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c01702
Chemical recycling of poly(siloxane)s: Is depolymerization to cyclic monomers the only way?
Portinha, D., Fleury, É., & Kocyan, S. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-27739-9.00024-4
Challenges in polyolefin re/upcycling catalysis specific to polymer feedstock
Chen, L., & Ellis, L. D. (2026) · Royal Society of Chemistry eBooks · doi:10.1039/9781837073221-00039
Comparative analysis of achieving carbon neutrality in the Termo Shop d. o. o.
Gradišnik, B. (2025) · University of Maribor digital library (University of Maribor)
Adsorption of Polyolefins from Alkanes on Alumina and Silica
Motolani, F., Jones, M. D., Briggs, D., Chandler, B. D., Long, B. K., Halbert, C. E., Kilbey, S. M., & Vogt, B. D. (2026) · Langmuir · doi:10.1021/acs.langmuir.6c03006
Self-citationSutar, R. S., Latthe, S. S., Xing, R., Saji, V. S., & Liu, S. (2026) · Sustainable materials and technologies · doi:10.1016/j.susmat.2026.e02289
Woosley, E. (2025) · Critical Debates in Humanities Science and Global Justice · doi:10.68709/001c.145920
Metadata
- Authors
- Vogt, B. D., Stokes, K. K., & Kumar, S. K.
- Affiliations
- Pennsylvania State University (US)
- Geisys Ventures, LLC, Lunenburg, Massachusetts 01462, United States
- Columbia University (US)
- Corresponding author
- Vogt, Bryan D.
- Venue
- ACS Applied Polymer Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-08-23
- Volume
- 3
- Issue
- 9
- Pages
- 4325-4346
- ISSN
- 2637-6105 (ISSN-L)
- OpenAlex
- W3193988466
- Cited by
- 385
- References
- 225
- Citations by year
- 2026: 84 · 2025: 105 · 2024: 87 · 2023: 66 · 2022: 38 · 2021: 5
- FWCI
- 17.37
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Polymer Materials (publishedVersion)
- Funders
- Pennsylvania State University
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Keywords
- plastic recycling, plastic waste management, plastic sorting, polymer additives, polyolefins, mechanical recycling, chemical recycling, value-added products, circular economy, ocean plastic, recycling economics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.